Rexon Technology RL328U Professional Portable Radio (UHF) User Manual Part 1
Rexon Technology Corp Professional Portable Radio (UHF) Users Manual Part 1
Contents
- 1. Users Manual Part 1
- 2. Users Manual Part 2
Users Manual Part 1
SAFETY TRAINING INFORMATION Your FM radio generates RF electromagnetic energy during transmit mode. This radio is de- signed for and classified as “Occupational Use Only", meaning it must be used only during the WARMING course of employment by individuals aware of the hazards, and the ways to minimize such hazards. This radio is NOT intended for use by the “General Popula- tion" in an uncontrolled environment. This radio has been tested and complies with the FCC RF expo- sure Iimits for “Occupational Use Only." In addition your FM radio complies with the following Standards and Guidelines with regard to RF energy and electromagnetic energy levels and evaluation of such levels for exposure to humans: - FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. - American National Standards Institute (095.1 — 1992). IEEE Stan- dard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields 3 kHz to 300 GHZ. - American National Standards Institute (0953 —1992), IEEE Ree ommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields — RF and Microwave. Restricted to occupational use to satisfy FCC RF energy exposure limits. See user manual for awareness and ”m" control into. - DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed FCC RF exposure limits. Aproper antenna is the antenna supplied with this radio by the manufactureror an antenna specifically authorized by the manufacturer for use with this radio. - DO NOT transmit for more than 50% of total radio use time (‘50% duty cycle‘). Transmitting more than 50% of the time can cause FCC RF exposure compliance requirements to be exceeded. The radio is transmitting when the “TX Indicator‘ lights red. You can cause the radio to transmit by pressing the “Pl—T” switch. oALWAYs use Icom authorized accessorles (antennas. batteries, belt clips, speaker/mics, etc). Use of unauthorized accessories can cause the FCC RF exposure compliance requirements to be ex- ceeded. ~ALWAYS keep the antenna at least 2.50m (1 Inche) away from the body when transmitting and only use the belt-clips which supplied when attaching the radio to your belt, etc., to ensure FCC RF exposure compliance requirements are not exceeded. To provide the recipients of your transmission the best sound quality, hold the antenna at least 5 cm (2 Inches) from mouth, and slightly off to one side. The information listed above provides the user with the information needed to make him or her aware of RF exposure, and what to do to assure that this radio operates wlthin the FCC RF exposure limits of thIs radio. Electromagnetic Interference/Compatiblllty During transmissions, your Icom radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference. turn off the radio in areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals. aircraft, and blasting sites.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2004:07:02 10:35:15+09:00 Modify Date : 2004:07:02 10:35:15+09:00 Page Count : 2 Creation Date : 2004:07:02 01:35:15Z Mod Date : 2004:07:02 01:35:15Z Producer : Acrobat Distiller 5.0 (Windows) Metadata Date : 2004:07:02 01:35:15ZEXIF Metadata provided by EXIF.tools