Rheem Professional Classic Plus Series Heavy Duty Power Vent Specification Sheet
2015-04-02
: Rheem Rheem-Professional-Classic-Plus-Series-Heavy-Duty-Power-Vent-Specification-Sheet-683456 rheem-professional-classic-plus-series-heavy-duty-power-vent-specification-sheet-683456 rheem pdf
Open the PDF directly: View PDF 
.
Page Count: 2
PRINTED IN U.S.A. 01/14 WP FORM NO. PRO+G RHHDPVCAN
INTEGRATED HOME COMFOR
T
INTEGRATED HOME COMFORT
Professional Classic Plus™ Heavy Duty Power Vent
gas water heaters offer larger capacities, multiple
venting options and the Guardian System
Efficiency
• .57 - .62 EF
Performance
• FHR: 120 gallons for 75-gallon models
and 104 gallons for 60-gallon models
• Recovery rate is 69.7 to 75.8 for 75-
gallon models and 50.5 to 55.6 for
60-gallon models at a 90 degree rise
Self-Diagnostic System
• Electronic gas control for
improved monitoring and
service
Low Emissions
• Eco-friendly burner, low NOx design
Features
• Uses indoor air for combustion;
blower exhausts the ue gases
• Standard 120 VAC electrical
connection
• New whisper quiet blower
• Offers larger capacities than the
standard Power Vent
Guardian System™ & Sensor
• Exclusive air/fuel shut-off device
• Maintenance free – no lter to clean
• Disables the heater in the presence of
ammable vapor accumulation
Flexible Venting Options
• Long venting lengths up to 100
equivalent feet
• PVC or CPVC certied to ULC-S636
vent pipe options
• Vertical or horizontal termination
Longer Life
• Rheem exclusive R-Tech (resistored)
anode rod provides long-lasting tank
protection
High Altitude Compliant
• Models certied for applications up to
7,700 ft. above sea level
Plus…
• Enhanced ow brass drain valve
• Temperature and pressure relief valve
included
• Low lead compliant
• Durable silicon nitride ignitor (HSI)
• EverKleen
™
patented system ghts
sediment build-up
• Standard replacement parts
Warranty
• 8-Year limited tank and parts warranty*
• With ProtectionPlus
™
the 8-year limited
tank warranty becomes 10-year
ProtectionPlus – order part number
SP20081 (6 pack only)
* See Residential Warranty Certicate for
complete information
Professional Classic Plus
Heavy Duty Power Vent
60 and 75-Gallon Capacities
Up to 75,000 Btu/h
Natural and LP Gas
Maintenance Free
Flame Arrestor PlateCombustion Shut-off System
Water
INTEGRATED HOME COMFORT
Residential Gas
Professional Classic Plus Heavy Duty
Power Vent Water Heaters
See dimensions chart on back.
LEED Point = 1
PRINTED IN U.S.A. 01/14 WP FORM NO. PRO+G RHHDPVCAN
2
In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.
Rheem Canada Ltd./Ltée • 125 Edgeware Road, Unit 1
Brampton, Ontario L6Y 0P5 • www.rheem.com
INTEGRATED HOME COMFOR
T
INTEGRATED HOME COMFORT
Professional Classic Plus™ Heavy Duty Power Vent Specifications
75-Gallon model features side water connections for space heating applications.
Specify LP gas when ordering. Add gas input and "P" to model number. Example: PRO+G60S-50P CN62 PV
DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFO.
T HT. TO HT. TO WATER HT. TO WATER AVG. ANN.
Y GAS INPUT IN RECOVERY IN FIRST HOUR TOP OF TANK GAS CONN. SIDE T&P CONN. SHIP. ENERGY OPERATING
P GAL. MODEL THOUS. BTU/H G.P.H. 90° RISE DEL. G.P.H. ASSEMBLY HT. DIAM. CONN. CNTR. VALVE SIzE WT. FACTOR COST
E CAP. NUMBER NAT. LP NAT. LP NAT. A B C D E F G (LBS) NAT. NAT.
Tall 60 PRO+G60S-55N CN62 PV 55 50 55.6 50.5 104 69-1/4 58 22-1/4 14 8 51-1/4 3/4 205 0.62 $294
Tall 75 PRO+G75S-75N CN57 PV 75 69 75.8 69.7 120 72 60-1/8 26-1/4 14-3/4 11 53-1/4 1 330 0.57 $320
HOT
WATER
CONNECTION COLD
WATER
CONNECTION
POWER VENT
ASSEMBLY
C
BF
A
D
G
G
E
T&P FITTING
3/4" N.P.T.
SIDE TAPS
(75 GAL.
MODEL
ONLY)
1/2"
ANODE ROD
NUMBER OF MAXIMUM MAXIMUM
90° ELBOWS NUMBER PIPE PIPE
WITH VENT OF 45° LENGTH (FT.) LENGTH (FT.)
TERMINAL ELBOWS 0' - 2000' 2000' - 7700'
One (1) None 45.0 35.0
One (1) One (1) 42.5 32.5
Two (2) None 40.0 30.0
Two (2) One (1) 37.5 27.5
Three (3) None 35.0 25.0
For the 3" vent, one 90° elbow is approximately equal to 5 feet of pipe.
One 45° elbow is approximately equal to 2.5 feet of pipe.
NOTICE: The mixing of 3" and 4" vent pipe is not recommended. If 4" pipe is
used, a 2" to 4" reducer fitting is recommended at the rubber coupling.
This water heater is supplied with a 3" Schedule 40 PVC 90° vent terminal.
When venting with 4" pipe, a Schedule 40 PVC 90° vent terminal must be used.
Screens for both 3" and 4" vent terminals have been included.
NUMBER OF MAXIMUM
90° ELBOWS NUMBER PIPE
WITH VENT OF 45° LENGTH (FT.)
TERMINAL ELBOWS 0' - 7700'
One (1) None 95
One (1) One (1) 92.5
Two (2) None 90
Two (2) One (1) 87.5
Three (3) None 85
Three (3) One (1) 82.5
Four (4) None 80
Four (4) One (1) 77.5
Five (5) None 75
For the 4" vent, one 90° elbow is approximately equal to 5 feet of pipe.
One 45° elbow is approximately equal to 2.5 feet of pipe.
Maximum and Minimum Vent Lengths for 3” Vents Maximum and Minimum Vent Lengths for 4” Vents
Water
INTEGRATED HOME COMFORT
Residential Gas
Professional Classic Plus Heavy Duty
Power Vent Water Heaters
