Rheem Professional Classic Plus Series Induced Specification Sheet

2015-04-02

: Rheem Rheem-Professional-Classic-Plus-Series-Induced--Specification-Sheet-683434 rheem-professional-classic-plus-series-induced--specification-sheet-683434 rheem pdf

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadRheem Rheem-Professional-Classic-Plus-Series-Induced--Specification-Sheet-  Rheem-professional-classic-plus-series-induced--specification-sheet
Open PDF In BrowserView PDF
Residential Gas
INTEGRATED
HO M E C O M F O RT Classic Plus
Professional
Water
Induced Draft Water Heater

Professional Classic Plus™ Induced Draft is a
compact, energy saving 29-gallon gas water heater
that outperforms standard 50-gallon models
Efficiency

Guardian System™ & Sensor

• .70 EF

• Exclusive air/fuel shut-off device for
­double protection

• Energy Star® rated
• Well insulated for reduced stand-by
heat loss

Performance

• Maintenance free – no filter to clean
• Protective control system that
disables the heater in the presence of
flammable vapor accumulation

• 29-Gallon capacity with 90 gallon FHR
performance
• Recovery: 61 GPH at a 90° F rise,
exceeds standard 50-gallon by
up to 49%

Combustion Shut-off System

Flame Arrestor Plate

Compact Size
• Small foot print, 17-3/4 inch ­
diameter

Maintenance Free

•F
 ast one-man installation, compact
and light weight

Longer Life

Self-Diagnostic System

• Premium grade anode rod provides
long-lasting tank protection

• Integrated self-diagnostic
system control for easy
installation and service

Low Emissions

High Altitude Compliant
• Certified for applications up to 7,700
feet above sea level

• Eco-friendly burner, low NOx design

Plus…

• Meets 40 ng/J NOx requirements

• Dual certified for both potable water
and space heating

Technology
• 110 VAC draft inducer (includes
8-foot cord with 3-prong plug)
• Standard atmospheric Category I,
double-wall, B-vent, 3" or 4"
(4" adaptor included)
What is a Fan Assisted Draft Inducer?
Standard gas water heaters produce
­extremely hot air during combustion, which
moves the combustion gases quickly up the
chimney. The XR90 is much more efficient
(i.e. it puts more heat in the water and less
heat up the chimney).
A proprietary baffle and flue design r­etains
the heat longer, therefore a device is needed
to propel the air and gases upward.
Fan assisted draft inducer creates the proper
draft to expel the combustion gases.

• Enhanced-flow brass drain valve
• Temperature and pressure relief valve
included
• Low lead compliant
• EverKleen™ patented system fights
sediment build-up

Professional Classic Plus
Induced Draft
29-Gallon Capacity
60,000 Btu/h
Natural Gas

• Standard replacement parts

Warranty
• 8-Year limited tank and parts
­warranty*

LEED Point = 1

• With ProtectionPlus™ the 8-year limited
tank warranty becomes 12-year
*See Residential Warranty Certificate for ­
complete information
Units meet or exceed ANSI requirements and have
been tested according to D.O.E. procedures. Units
meet or exceed the energy efficiency requirements
of NAECA, ASHRAE standard 90, ICC Code and all
state energy efficiency performance criteria.

See specifications chart on back.

IINNTTEEGGRAT
ED
MO
FO
RAT
E DH OHM
OEMCEOC
MRT
F O RT
PRINTED IN U.S.A. 03/15 WP FORM NO. PRO+G RHID Rev. 1

Residential Gas
INTEGRATED
HO M E C O M F O RT Classic Plus
Professional
Water
Induced Draft Water Heater

Rheem Professional Classic Plus Induced Draft Specifications
		

DESCRIPTION	

FEATURES	

ROUGHING IN DIMENSIONS (SHOWN IN INCHES)	

										
				
GAS INPUT IN	
RECOVERY IN	 FIRST HOUR	
HT. TO	
TANK		
	 GAL.	 MODEL	
THOUS. BTU/HR.	
G.P.H. 90° RISE	
DEL. G.P.H.	
VENT	
HT.	
DIAM.	
	 CAP.	 NUMBER	
NAT.	
NAT.	
NAT.
	
A	
B	
C	
	

29	

PRO+G29-60N RH70 ID	

60	

61	

90	

65-1/2	

58-1/4	

HT. TO		
GAS	
VENT 	
CONN.	
SIZE	
D	
E	

17-3/4	

14	

3 or 4	

ENERGY INFO.

WATER	
CONN.	
CNTR.	
F	

HT. TO
SIDE	
T&P	
G	

WATER	
CONN.	
H	

SHIP.	
WT.	
(LBS)	

ENERGY
FACTOR
NAT.

8	

51-9/16	

3/4	

136	

0.70

Energy Factor based on D.O.E. (Department of Energy) test p
­ rocedures.

Performance
First Hour Rating
90

60

Gallons

86

Conventional
50-Gal. Gas

82

F
E

Conventional
50-Gal. Gas

3/4" N.P.T.
RELIEF
VALVE
OPENING

30

10

29 Gal.

0

50 Gal.

29 Gal.

A B
1/2"

Energy Efficiency

G

D

0.80

PRO+G29-60N RH70 ID
Conventional
50-Gal. Gas

0.60

C

50 Gal.

Efficiency

0.70

COLD
WATER
CONNECTION

40

20

80
78

PRO+G29-60N RH70 ID

50

Energy Factor (EF)

Gallons

88

H

HOT
WATER
CONNECTION

70

PRO+G29-60N RH70 ID

84

H

Recovery

92

ANODE ROD

Therm-X-Guard thermal
expansion tank recommended. ­
See spec sheet 105-29
for correct sizing.

0.50
0.40
0.30
0.20
0.10

29 Gal.

50 Gal.

XR90
Energy Factor based on FTC Energy Guide labels.

50 Gal.

Footprint Comparison
Narrow 17-3/4 inch diameter fits
in a smaller space than standard
40 or 50-gallon models.

In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.
Rheem Water Heating • 101 Bell Road
Montgomery, Alabama 36117-4305 • www.rheem.com
IINNTTEEGGRAT
ED
MO
FO
RAT
E DH OHM
OEMCEOC
MRT
F O RT

2
PRINTED IN U.S.A. 03/15 WP FORM NO. PRO+G RHID Rev. 1



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Create Date                     : 2015:03:02 12:39:46-06:00
Creator                         : Adobe InDesign CS6 (Macintosh)
Modify Date                     : 2015:03:05 14:25:22-06:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2015:03:05 14:25:22-06:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Instance ID                     : uuid:872cc05f-329a-c04d-9167-0acd6e724310
Original Document ID            : xmp.did:0A80117407206811B34BA559CEB6FCA7
Document ID                     : xmp.id:E32ED8F9D2236811822AD019CA7A7AD8
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:E22ED8F9D2236811822AD019CA7A7AD8
Derived From Document ID        : xmp.did:65EF1E7407206811822A99B419490D7A
Derived From Original Document ID: xmp.did:0A80117407206811B34BA559CEB6FCA7
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2015:03:02 12:39:46-06:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 2
EXIF Metadata provided by EXIF.tools

Navigation menu