Rheem Professional Classic Series Atmospheric For Manufactured Housing Specification Sheet

2015-04-02

: Rheem Rheem-Professional-Classic-Series-Atmospheric-For-Manufactured-Housing-Specification-Sheet-683498 rheem-professional-classic-series-atmospheric-for-manufactured-housing-specification-sheet-683498 rheem pdf

Open the PDF directly: View PDF PDF.
Page Count: 2

Efficiency
• .62 - .63 EF
Performance
• FHR: 59 gallons for 40-gallon model
and 48 gallons for 29-gallon model
• Recovery: 30.3 to 34.3 GPH at a
90° F rise, depending on model
Longer Life
• Premium grade anode rod provides
long-lasting tank protection
Guardian System™ & Sensor
• Exclusive air/fuel shut-off device
• Maintenance free – no lter to clean
• Disables the heater in the presence of
ammable vapor accumulation
Flexibility
• Field convertible controls and burner
assembly for natural gas or LP
operation included
Low Emissions
• Eco-friendly burner, low NOx design
Altitude Certification
• Certied up to 8,400 ft. above sea
level for the 40-gallon model
• Certied up to 6,000 ft. above sea
level for the 29-gallon model
• High altitude models available for
29-gallon
Professional
Classic
™ Atmospheric gas water
heaters feature the Guardian System™ and are
CSA and HUD certified for Manufactured Housing
Professional
Classic
Atmospheric for
Manufactured Housing
29 and 40-Gallon Capacities
Up to 34,000 Btu/h
Natural and LP Gas
Draft Diverter
Improved design provides
efcient heating with
down-draft protection.
Plus…
• Enhanced ow brass drain valve
• Side inlet temperature and pressure
relief valve opening
• Factory installed temperature and
pressure relief valve – side location
• Low lead compliant
• Two hole top for anode rod and hot
water outlet
• Exclusive Rheemglas® tank lining
resists corrosion and prolongs tank life
• Piezo ignition – easy light pilot, no
matches required
• Cold water inlet – side connection
allows for quick, economical hook-up
• Optional leg kit for replacement units
• EverKleen
™
patented system ghts
sediment build-up
Warranty
• 6-Year limited tank and parts
warranty*
* See Residential Warranty Certicate for
complete information
Units meet or exceed ANSI requirements and have
been tested according to D.O.E. procedures. Units
meet or exceed the energy efciency requirements
of NAECA, ASHRAE standard 90, ICC Code and all
state energy efciency performance criteria.
Water
INTEGRATED HOME COMFORT
Residential Gas
Professional
Classic
Atmospheric
Water Heaters for Manufactured Housing
PRINTED IN U.S.A. 02/15 WP FORM NO. PROG RHMH N
INTEGRATED HOME COMFOR
T
INTEGRATED HOME COMFORT
See dimensions chart on back.
PRINTED IN U.S.A. 02/15 WP FORM NO. PROG RHMH N
2
In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.
Rheem Water Heating • 101 Bell Road
Montgomery, Alabama 36117-4305 • www.rheem.com
INTEGRATED HOME COMFOR
T
INTEGRATED HOME COMFORT
Professional
Classic
™ Atmospheric for Manufactured Housing Specifications
Water
INTEGRATED HOME COMFORT
Residential Gas
Professional
Classic
Atmospheric
Water Heaters for Manufactured Housing
Energy Factor based on D.O.E. (Department of Energy) test procedures.
DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFO.
T HT. TO WATER HT. TO
Y GAS INPUT IN RECOVERY IN FIRST HOUR HT. TO TANK GAS VENT CONN. SIDE T&P SHIP.
P GAL. MODEL THOUS. BTU/H G.P.H. 90° RISE DEL. G.P.H. VENT HT. DIAM. CONN. SIZE CNTR. VALVE WT. ENERGY
E CAP. NUMBER NAT. LP NAT. LP NAT. LP A B C D E F G (LBS) FACTOR
Tall 29 PROG30-32N RH63 MH 32 30 32.3 30.3 48 48 59-5/8 56-7/8 16-1/2 14-3/8 3 or 4 8 50-7/8 100 0.63
Tall 40 PROG40-34N RH62 MH 34 32 34.3 32.3 59 59 61-1/2 58-1/2 18-1/2 14-3/8 3 or 4 8 52-1/4 115 0.62
E
G
BA
C
F
HOT
WATER
CONNECTION
D
1/2"
3/4" N.P. T.
RELIEF
VALV E
OPENING
FLUE
3/4" N.P.T. ANODE ROD
20-1/8"
COLD
WATER
CONN.
3/4"
N.P.T.
* Adjustable length roof jacks
†
Fixed length roof jacks
Roof jack must be ordered separately with 30, 40 and 50-gallon atmospheric models
and must be in accordance with instructions furnished with the heater. Clamps and
secure strapping are packed in water heater carton.
ROOF JACKS ROOF OPENING ROOF JACK
PART NO. TO FLOOR DIM. ADJ. RANGE
AP12118B* 98" Min./126" Max. 16" Min./32"Max.
AP12118C* 112" Min./154" Max. 30" Min./60" Max.
AP12118D* 130" Min./189" Max. 48" Min./95" Max.
AP12119B
†
94" Min./106" Max. 12"

Navigation menu