Rheem Professional Classic Series Direct Vent For Manufactured Housing Specification Sheet
2015-04-02
: Rheem Rheem-Professional-Classic-Series-Direct-Vent-For-Manufactured-Housing-Specification-Sheet-683503 rheem-professional-classic-series-direct-vent-for-manufactured-housing-specification-sheet-683503 rheem pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
Residential Gas INTEGRATED HOME COMFORT Classic Direct Vent Professional Water Water Heaters for Manufactured Housing Professional Classic™ Direct Vent gas water heaters from Rheem are certified for Manufactured Housing (HUD) and modular construction Efficiency Roof Jacks • .58 - .61 EF Performance • FHR: 67-gallons for 50-gallon model, 60 gallons for 40-gallon model and 51 gallons for 30-gallon model • Recovery rate is 32.3 gallons at a 90 degree rise for 50-gallon model, 30.3 gallons for 30 and 40-gallon models Flexibility • Field convertible controls for natural gas or LP operation included • No external door is required • Provides maximum design freedom since it can be placed anywhere within the home • Hot water outlet located at top • Cold water inlet at side for fast, economical hook-up 12" Non-Adjustable & Air Inlet 15-32" Adjustable & Air Inlet 30-60" Adjustable & Air Inlet 48-95" Adjustable & Air Inlet AP12032E AP12032B AP12032C AP12032D Air Inlets 6" Non-Adjustable 11-22" Adustable AP12019B AP12017B Extension Pipe Kit Roof Jack Extension Pipe Kit AP12021 oof jack and air inlet must be ordered separately R with 30, 40 and 50-gallon direct vent models and must be in accordance with instructions furnished with the heater. No other roof jack or air inlet assemblies are approved for installation with this heater. Clamps and secure strapping are packed in water heater carton. Longer Life • Rheem exclusive R-Tech (resistored) anode rod provides long-lasting tank protection Plus… Adjustable Roof Jack Vent • Piezo ignition – easy light pilot Design allows adjustment to roof pitches of up to • Factory installed temperature and pressure relief valve – side location 5/12". Four roof jacks available to accommodate roof thickness of 12" up to 95". Direct Combustion Air Inlet Air is drawn directly into combustion chamber through air inlet fixed to base; 1/2" screen for rodent p rotection. • Enhanced flow brass drain valve • Low lead compliant • EverKleen™ patented system fights sediment build-up Warranty • 6-Year limited tank and parts warranty* *See Residential Warranty Certificate for complete information Professional Classic Direct Vent for Manufactured Housing 30, 40 and 50-Gallon Capacities Up to 32,000 Btu/h Natural and LP Gas Units meet or exceed ANSI requirements and have been tested according to D.O.E. procedures. Units meet or exceed the energy efficiency requirements of NAECA, ASHRAE standard 90, ICC Code and all state energy efficiency performance criteria. See dimensions chart on back. IINNTTEEGGRAT ED MO FO RAT E DH OHM OEMCEOC MRT F O RT PRINTED IN U.S.A. 09/13 WP FORM NO. PROG RHMHDV Residential Gas INTEGRATED HOME COMFORT Classic Direct Vent Professional Water Water Heaters for Manufactured Housing Professional Classic™ Direct Vent for Manufactured Housing Specifications DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES) T Y GAS INPUT IN RECOVERY IN FIRST HOUR HT. TO TANK P GAL. MODEL THOUS. BTU/H G.P.H. 90° RISE DEL. G.P.H. VENT HT. DIAM. E CAP. NUMBER NAT./LP NAT./LP NAT./LP A B C Tall 30 PROG30-30N RH61 MH DV 30 30.3 51 57 Tall 40 PROG40-30N RH59 MH DV 30 30.3 60 57-1/2 Tall 50 PROG50-32N RH58 MH DV 32 32.3 67 57 57 HT. TO GAS VENT CONN. SIZE D E ENERGY INFO. ROOF HT. TO WATER JACK SIDE T&P CONN. SHIP. VENT SIZE VALVE size WT. F G H (LBS) ENERGY FACTOR NAT./LP 17-3/4 14-1/2 3 5 51-1/2 20 110 0.61 57-1/2 19-3/4 14-1/2 3 5 51-1/2 20 125 0.59 3 5 51-1/2 20 150 0.58 57 21-3/4 14-1/2 Energy Factor based on D.O.E. (Department of Energy) test p rocedures. ADJUSTS TO PITCHES OF UP TO 5/12" F 24" MIN. A B E 0" MIN. WALL CLEARANCE C RELIEF VALVE COLD WATER CONN. G 1/2" 2" D H WATER CONNECTIONS ALL 3/4" N.P.T. In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice. Rheem Water Heating • 101 Bell Road Montgomery, Alabama 36117-4305 • www.rheem.com IINNTTEEGGRAT ED MO FO RAT E DH OHM OEMCEOC MRT F O RT 2 PRINTED IN U.S.A. 09/13 WP FORM NO. PROG RHMHDV
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Create Date : 2013:09:18 16:16:09-04:00 Creator : Adobe InDesign CS6 (Macintosh) Modify Date : 2013:09:23 14:25:30-05:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:56:37 Metadata Date : 2013:09:23 14:25:30-05:00 Creator Tool : Adobe InDesign CS6 (Macintosh) Instance ID : uuid:88d77ed8-fd02-6f4b-9c3e-d6b69d8d3216 Original Document ID : xmp.did:0A80117407206811B34BA559CEB6FCA7 Document ID : xmp.id:62700D5CE12068118083897ABF10DEB7 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:61700D5CE12068118083897ABF10DEB7 Derived From Document ID : xmp.did:D750EA49AA216811923FE75EA4967D1F Derived From Original Document ID: xmp.did:0A80117407206811B34BA559CEB6FCA7 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Macintosh) History Changed : / History When : 2013:09:18 16:16:09-04:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 2EXIF Metadata provided by EXIF.tools