Rheem Value Series Single Stage Submittal Sheet

2015-04-02

: Rheem Rheem-Value-Series-Single-Stage-Submittal-Sheet-683706 rheem-value-series-single-stage-submittal-sheet-683706 rheem pdf

Open the PDF directly: View PDF PDF.
Page Count: 3

DownloadRheem Rheem-Value-Series-Single-Stage-Submittal-Sheet- Rheem-value-series-single-stage-submittal-sheet
Open PDF In BrowserView PDF
SUBMITTAL COVER SHEET
PROJECT NAME
LOCATION
ARCHITECT
ENGINEER
CONTRACTOR
SUBMITTED BY

DATE

UNIT SUMMARY
Quantity
Unit Designation
Model No.
Total Cooling
Sensible Cooling
Air Ent. Evaporator
Air Lvg. Evaporator
Heating Input
Heating Output
CFM/ESP
EER/SEER
Electrical
Minimum Ampacity
Min.-Max. Breaker
Net Unit Weight
Accessory
Catalog Form Number

ACCESSORIES:

NOTES:

PRINTED IN U.S.A 01/12 QG FORM NO. M11-1640

FORM NO. X33-1420
Supersedes Form No. X66-1253 Rev. 1

SUBMITTAL SHEET FOR 13PJL SERIES
11/2 TO 5 NOMINAL TON [5.28 TO 17.58 kW], UP TO 14.5 SEER
HEAT PUMP UNITS
JOB NAME

LOCATION

CONTRACTOR

ORDER NO.

ENGINEER

UNIT MODEL NO.

SUBMITTED FOR

APPROVAL

DATE

RECORD

COIL MODEL NO.
AIR HANDLER MODEL NO.

FEATURES FOR 13PJL SERIES HEAT PUMP UNITS
11/2 TO 5 NOMINAL TON [5.28 TO 17.58 kW]

UNIT DATA
COOLING PERFORMANCE
EFFICIENCY .................................. _______ SEER
TOTAL CAPACITY*.................... _______ MBH [kW]
SENSIBLE CAPACITY* .............. _______ MBH [kW]
OUTDOOR DESIGN TEMP. ........ _______ °F [°C] DB
TEMP. OF AIR ENTERING
EVAPORATOR COIL .............. _______ °F [°C] DB
_______ °F [°C] WB

• Outdoor heat pump designed for ground level or rooftop
installations. These units offer comfort and dependability for
single, multi-family and light commercial applications.
• Painted louvered steel cabinet
• Easily accessible control box
• Condenser coils constructed with copper tubing and enhanced
aluminum fins.
• Grille/Motor mount for quiet fan operation
• Filter Drier (shipped – not installed)

POWER INPUT REQUIREMENT .......... _______ kW
(*uses blower motor heat)

HEATING PERFORMANCE

ACCESSORIES/OPTIONS
EFFICIENCY .................................. _______ HSPF
TOTAL CAPACITY*.................... _______ MBH [kW]
OUTDOOR DESIGN TEMP. ........ _______ °F [°C] DB
TEMP. OF AIR ENTERING
EVAPORATOR COIL .............. _______ °F [°C] DB

SUPPLY AIR BLOWER PERFORMANCE
TOTAL AIR SUPPLY .................. _______ CFM [L/s]
TOTAL RESISTANCE EXTERNAL
TO UNIT........................................ _______ IWG
BLOWER SPEED.............................. _______ RPM
POWER OUTPUT REQUIREMENT .... _______ BHP
MOTOR RATING .......................... _______ HP [W]
POWER INPUT REQUIREMENT .......... _______ kW

ELECTRICAL DATA
POWER SUPPLY .......................... ___________ Hz
TOTAL UNIT AMPACITY.................. _______ AMPS
MINIMUM WIRE SIZE ...................... _______ AWG
MAXIMUM OVERCURRENT DEVICE
FUSES/HACR BREAKER ............ _______ AMPS

CLEARANCES
ACCESS SIDE

24" [609.6 mm]

AIR INLETS

12" [304.8 mm]

ABOVE UNIT

60" [1524 mm]

Outdoor Thermostats (Model No. RXPT-A01, A02, A03, A04) ..
High Pressure Control (Model No. RXAB-A07) ..........................
Low Ambient Control (Model No. RXAD-A07)............................
Compressor Time Delay Control (Model No. RXMD-B01) ........
Blower Time Delay Control (Model No. RXMD-C04)..................
Sound Enclosure* ......................................................................
Heat Pump Monitor (Model No. RXPM-B01) ..........................
Thermostats and Subbases*
Start Components*
*Available through the Replacement Parts Division

13PJL 18, 24, 30,
36, 42, 48, 60

w

L

H

SEE DETAIL A

Model Number
13P(-)L
18, 24

Height “H”
(Inches) [mm]
261/4 [666.75]

Length “L”
(Inches) [mm]
235/8 [600.07]

Width “W”
(Inches) [mm]
235/8 [600.07]

30

261/4 [666.75]

275/8 [701.67]

275/8 [701.67]

36
42, 48, 60

273/8 [695.32]
353/8 [898.52]

315/8 [803.27]
315/8 [803.27]

315/8 [803.27]
315/8 [803.27]

[ ] Designates Metric Conversions

NOTES:

Before proceeding with installation, refer
to installation instructions packaged
with each model, as well as complying
with all Federal, State, Provincial, and
Local codes, regulations, and practices.

Rheem Sales Company, Inc.
P.O. Box 17010, Fort Smith, AR 72917

“In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.”
PRINTED IN U.S.A.

6-14 QG

FORM NO. X33-1420
Supersedes Form No. X33-1155 Rev. 3
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Create Date                     : 2014:06:05 13:27:03-05:00
Modify Date                     : 2014:06:05 15:58:11-05:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Title                           : untitled
Metadata Date                   : 2014:06:05 15:58:11-05:00
Producer                        : Acrobat Distiller 10.0.0 (Macintosh)
Document ID                     : uuid:3414cae3-baf9-0349-a417-a78ae0bb8161
Instance ID                     : uuid:d2987272-c7e6-1748-8b1b-92fc2aad3949
State                           : 1
Version                         : 1.1
Page Count                      : 3
Warning                         : [Minor] Ignored duplicate Info dictionary
EXIF Metadata provided by EXIF.tools

Navigation menu