Rhine Electronics Co 8BT9150C User Manual 8
Rhine Electronics Co Ltd 8
8
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1011 |
| Application ID | UOngKL0eewttKi7UGYuOgg== |
| Document Description | 8 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 3.86kB (48206 bits) |
| Date Submitted | 1998-05-06 00:00:00 |
| Date Available | 1998-05-28 00:00:00 |
| Creation Date | 2001-07-17 02:29:20 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2001-07-17 02:29:21 |
| Document Title | 8 |
Exhibit E User's Manual RHlNE ELECTRIC, (10., LTD. FCC lD.: CHQSBT9150C TRANSMITTER OF REMOTE CONTROL INSTRUCTIONS FOR OPERATION SETTING THE OPERATING CONTROLS page = 2-1 . This device which one of black lines series with AC 120V power supply. Nov , we take 60Hz power supply to afford power supply of transmitter when it trough rectify . So. there is no troubles with change batteries forever. . Store the controller away from excess heat or humidity. . This remote control Unit is requipped with 16 code combinations. To prevent possible interference from Or to other remote units such as garage door openers. car alarm or security system. If you find that your fan and light kit so on and off without using your control, simply change the combination code in your transmitter and receiver. . Operation buttons on the panel of transmitter. HIGH key — For fan High speed. MED key — For fan Medium speed. LOll key - For fan Low speed. FANOFF key ~ For fan speed Off . LIGHT key ' For light brightness and ON/OFF control. . Start the fan 1 Press the selected speed button to run the fan at the desired. ‘ Turn off the fan 2 Press the FANOFF button. . Light control 1 Turn the light on or off by only touching the LIGHT button. Keep pressing the button in excess of 0.7 second it becomes a dimer. the light varies cyclically in 0.8 second. One of the important feature of this control is AUTO-RESUME. After power on. it allows the light return to where it. was off. GENERAL INFORMATION = page = 2—2 This REMOTE controller is designed to separately control your ceiling fan speed and light brightness . There are four buttons (Hi.l4ed,Lov.Off) to control the fan speed and off. The Light Diner button will control the light brightness dinner and off. The ON/UFF switch will turn on and turn off the unit's power supply. INSTRUCTIONS FOR INSTALLATION AND OPERATION OF FAN SPEED CONTROLLER A. Setting the code on your new transmitter. 1. Slide code switches to your choice of UP and DOW positionl Factor:l setting is all UP. Do not use this setting. Use ball point pen or small screwdriver. Slide firmly up or down. B. Setting the code on your new Receiver unit. 1‘ Slide code switches to the same positions as set on your transmitter. They must be set to same positions to work. 2. Make sure the code switches are on the right positions. NOT ICE = The changes or modifications not expressly approved by the ‘ party responsible for compliance could voi] user's authority to operate the eguipment. NOTE : This FCC ID. application ls for " TRANSMITTER ". The RECEIVER use for TRANSMITTER which had ccmfied by FCC and got an FCC 1D. " CHQSBT9060-IRS "A
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 2001:07:17 02:29:20 Producer : Acrobat Distiller 4.0 for Windows Modify Date : 2001:07:17 02:29:21-04:00 Page Count : 4EXIF Metadata provided by EXIF.tools