Rhine Electronics Co 8BT9160-1C User Manual 8
Rhine Electronics Co Ltd 8
8
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1187 |
| Application ID | 82Z9vOza2NVBCOsdAlfxSg== |
| Document Description | 8 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 3.79kB (47362 bits) |
| Date Submitted | 1998-05-07 00:00:00 |
| Date Available | 1998-06-29 00:00:00 |
| Creation Date | 2001-07-17 12:53:24 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2001-07-17 12:53:26 |
| Document Title | 8 |
User's Manual
RHINIC ELI-X‘TRK‘ (‘().. LTD.
l-‘('(' ID.: (‘HQ8BT9I60—K'
'I RAXSHI'I‘TER OF RENO FE CONTROL
. This devi n which one of black lines ser
Tl:—
. mm
INSTRUCTIONS FOR OPERATION
SETTING THE OPERATING CONTROLS
{low , w 5 r suroly t . fiver sum .;
there IS no troubles with arna
. Store the controller away from ex S“ heat or humidity.
ms. To prevent
barrage dovr
cram control an’
Posstle interference
' “m v” , ,
on and off" witnuu. usmg you
code in your transmitter and receiver.
. Operation buttons on the panel of transmitter.
HIGH key - For fan High Speed.
MED key ~ For fan Medium speed.
LDDJ key — For fan Low speed.
FANOFF key - Fur fan speed Off.
LIGHT key - For light brightness and OH, OFF control.
REV key A For fan speed Reverse.
. Start the fan 5
Press the selected Speed button to run the fan at the desired.
. Turn off the fan 1
Press the FANUFF button.
Light control 1
Turn the light on or off by only touching the LIGHT button.
Keep pressing the button In excess of 0.7 second it becomes a dimer,
the light varies cyclically in 0.8 second.
One of the Important feature of this control is AUTO—RESUME. After power
on, it allows the light return to where it was off.
: égsl
l, g;il‘
illwez
OFF
GENERAL INFORMAT ION :
A];
page 1
Tnis REMOTE controller is designed to SS ately control ynur
ceiling fan speed and light brightness . There are. five buttons
(lli.Hed,Low,0ff,REV1 to control the fan speed and off. The l.
control tho. limb ness lint
will turn on and * ‘rn _>.i the uni
the indoor , .
i set the fan on, off nuflmatieii Ly.
Dinner button w'
The Oil/OFF swi
supply, th
Resister w
Liv you in fair ;-< tun i‘
1. Slide code switches to your choice of UP and DOWN position.
Factory Setting is all llPi Do not use this Setting.
Use ball point pen or small screwdriver,
Slide firnlj up or down.
B, Setting the man on your new Receiver unit.
1. Sl ide code switches to the same positions as. set on your transmitter,
They must be set to same positions to work
2. Make sure the code switches are on the right positions.
NOTICE =
The changes or modifications not expressly approved by the
party responsible for compliance could voil user's authority
to operate the c-guipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 2001:07:17 12:53:24 Producer : Acrobat Distiller 4.0 for Windows Modify Date : 2001:07:17 12:53:26-04:00 Page Count : 3EXIF Metadata provided by EXIF.tools