Richen A5 Bluetooth Earphone User Manual

Richen Industrial Co.,Ltd Bluetooth Earphone Users Manual

User manual

1 INSTRUCTION MANUAL Model No.: A5 BLUETOOTH SPORTY EARPHONE WITH MP3 PLAYER Charging The Bluetooth Earphone 1. Open the rubber cover of charging port (6). 2. Connect the Bluetooth Earphone’s charging port (6) by USB cable. 3. The LED indicator (5) will turn ON in red light; the rechargeable battery is in charging. 4. The LED indicator (5) red light will be changed to blue when the rechargeable battery is fully charged. 5. Low battery: the LED indicator (5) will be blinking in red. Bluetooth Earphone pairing / Reconnecting 1.Power on: Press and hold the multifunctional button (2) for 3 seconds, LED indicator (5) will be blinking in blue and red alternately, the device is turned ON and goes into searching / paring / reconnect mode. 2. Turn ON the Bluetooth function on your mobile phone. 3. Search for “A5” and select it to pair, there will be a short beep means Bluetooth headphone is connected with mobile phone. 4. The Bluetooth headphone will be reconnecting automatically if your mobile phone has been paired. (Depend on the of mobile phone’s type and configuration, manual re-connection may require on some devices) . 5. If pairing is successful, the LED indicator (5) light will switch to slow blink in blue. 6. Power off: Press and hold multifunctional button (2) and LED indicator (5) will in red and turn off. 7. If Bluetooth Speaker not connected with mobile phone in 10minutes, it will turn off automatically.
Bluetooth Earphone Control Function 1. In playing music, press multifunctional button (1) to pause music, press it once again to play.2. Press the Volume + button (3) to increases the volume level.3. Press the Volume - button (4) to decreases the volume level.4. Press and hold the Volume + button (3) to play next music file.5. Press and hold the Volume - button (4) to play previous music file.Hands Free Control Function Hand free function and calling 1. Press multifunctional button (2) to pick up the call if you want.2. Press multifunctional button (2) again to hand up the call when finished.3. Double press multifunctional button (2) quickly to reject the coming call.4. Double press multifunctional button (2) quickly to dial the last call no.LED indicator 1. Bluetooth pairing: LED will be blinking in blue and red alternately.2. Bluetooth paired: LED will be blinking in blue every 6 seconds.3. Charging : LED will be in red; will be in blue when the battery is fully charged.4. Low battery : LED will be blinking in red.MP3 Player Function 1. Under Bluetooth function, press Bluetooth/MP3 switch button (1) to MP3 player function;Under MP3 player function, press Bluetooth/MP3 switch button (1) back to Bluetooth function. FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐‐Reorient or relocate the receiving antenna. ‐‐Increase the separation between the equipment and receiver. ‐‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐‐Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu