User manual
BTS-35 BM3251_AUX In_20140729 V1.0
1
User’s Manual
Model: BTS-35
Bluetooth Stereo Speaker
With
AUX In
BTS-32 BM3251_AUX In_20140729 V1.0
2
Important
Don’ts
• Do not place naked flames, such as lighted candles on or near the
product.
• Do not place objects filled with liquids, such as vases on or near the
product.
• Do not use or store this product in a place where it is subject to direct
sunlight, heat, excessive dust or vibration.
• Do not keep or store this product in wet conditions for long period.
• Do not clean this product with water or other liquids.
• Do not block or cover the slots and holes in the product.
• Do not push foreign objects into the slots or holes in the product.
• Do not attempt to open this product yourself. There are no user
serviceable parts inside.
• Do not allow children access to plastic bags.
Safety Instructions
• Before using this product, read and follow all warnings and
instructions.
• This product is not intended for use by young children. Young children
should be properly supervised.
• This product is intended for household use only and not for
commercial or industrial use.
• Do not expose to dripping or splashing.
• No naked flame sources, such as lighted candles, should be placed on
the product.
• Ventilation should not be impeded by covering ventilation openings
with items such as newspapers, table cloths, curtains and the like.
• Make sure the unit is adjusted to a stable position. Damage caused by
using this product in an unstable position or by failure to follow any
other warning or precaution contained within this user manual will
not be covered by warranty.
Warning
• Never remove the casing of this apparatus.
• Never place this apparatus on the other electrical equipment.
Notice
• If at any time in the future you should need to dispose of this product
please note that: All batteries and accumulators need to be removed
from this product (Removal of Waste Batteries and Accumulators).
• Always bring your product to a professional to remove the built-in
battery.
BTS-32 BM3251_AUX In_20140729 V1.0
3
A. Outlook and Controls
Item
Control
1 AUX In LED Indicator (Red, inside silicon )
2 Bluetooth LED Indicator (Blue)
3 Button (ON / OFF)
4 Button
5 MIC Hole
6 Button
7 Button
8 Button
9 Micro USB socket (for Power Input; DC 5V, 500mA)
10 AUX IN (3.5mm Jack, Stereo)
11 Charge LED Indicator (Red)
12 Rubber Seal Cover (for Splash Water Protect)
13 Lanyard Bracket
14 L & R Speakers
BTS-32 BM3251_AUX In_20140729 V1.0
4
B. About the rechargeable Battery & Charging
1. Regarding the lithium rechargeable battery
This Bluetooth Speaker has an internal, non–user-replaceable battery.
For best results, the first time you use this Bluetooth Speaker, let it
charge for about 4 ~ 6 hours or until the “Charge LED (11)” Indicator
light from On to off which show you the battery is fully charged.
For maintain the battery life and performance, if speaker isn’t used
for a while, the battery might need to be recharged. Charge the
battery at least once every month.
2. To recharge the built-in battery:
Connect the Bluetooth Speaker’s “Micro USB socket (5)” with the
Computer’s USB port through USB cable.
The “Charge LED (11)” Indicator will turn On in red, the battery is in
charging.
The “Charge LED (11)” Indicator will turn Off when the rechargeable
battery is fully charged.
Disconnect the USB cable when it is done.
C. Power ON and Pairing
1. Press and hold the “ (3)” button to turn On the device. A series of
tones will sound, followed by voice announce “It is pairing waiting
for device connecting” from speakers. And the “Bluetooth LED (2)”
indicator is fast blinking in Blue.
2. Then, activate the Bluetooth function in your Bluetooth device (such
as Mobile Phone or Personal Computer); the device will enter to
Bluetooth searching mode automatically, if not, tap the relate
selection to manually enter to searching mode. (refer to your device’s
manual when necessary)
3. Your Bluetooth device should show “HOMEANDGO” in list, and then
select it for pairing. Waiting for some seconds and you will see
connected message as shown on your mobile device. (For some
Bluetooth devices, you may need to input “0000” as pairing
password)
4. If pairing is successful, voices announce “paired” from speakers, and
the “Bluetooth LED (2)” indicator will slow blinking each 3 seconds
once.
5. Now, you can start to music play from the mobile device by it music
player program.
6. Press and hold the “ (3)” button to turn Off the device when it is
not in use.
BTS-32 BM3251_AUX In_20140729 V1.0
5
D. Disconnect from paired device
1. Press and hold the “ (6)” button to switch to new “Searching /
Pairing” mode, the paired device will disconnect.
2. Or, you can choose “Disconnect” from Bluetooth paired device list on
your mobile device.
3. In this case; the Bluetooth Speaker will turn back into “Searching /
Pairing” mode in seconds, a series of tones will sound and the
“Bluetooth LED (2)” indicator will fast blinking in Blue from slow.
4. Now, you can process for new mobile device pair or power Off the
Bluetooth Speaker as you wanted.
E. Auto re-connect with paired device and New pairing
1. Every time you turn On the Bluetooth speaker power; it will firstly
searching for the mobile device, which has been paired previously
and still in record. The Bluetooth Speaker will re-connect this mobile
device as priority if it is in Bluetooth searching device mode.
2. If not found in some seconds, the Bluetooth Speaker then is turn into
new pairing mode internally.
3. Now you can process for new mobile device pair. (refer to item C.3~6
methods)
F. Bluetooth Music Playing Control Function
1. In playing music, press “ (6)” button to pause the music. To resume
the music press it again.
2. Press and hold the “ (8)” button to increases the volume level.
3. Press and hold the “ (7)” button to decreases the volume level.
4. When maximum or minimum volume is reached, a series of tones will
sound.
5. Press once the “ (8)” button to go to next music.
6. Press once the “ (7)” button to go to previous music.
G. Hand Free Function
1. When there is an incoming call during Bluetooth music playing mode;
2. The ringing sound will up and the playing music will pause
automatically.
3. Press “ (4)” button to pick up the call if you want.
4. Now you have hand free function with the Bluetooth speaker.
5. Press “ (4)” button again to hang up the call when finished. And,
6. The paused music will start to play automatically.
7. Press and hold “ (4)” button for 3 seconds to ignore the incoming
call.
Tip: speak to the “MIC (5)” hole direct with distance in 30 ~ 60cm to get
the best speakerphone performance when necessary.
BTS-32 BM3251_AUX In_20140729 V1.0
6
H. Redial For Last Call Function
1. To redial for last called number by the Bluetooth Speaker, even it is in
music playing mode.
2. Press twice the “ (4)” button to enter into redial function, the
playing will pause and switch to hand free function for redial.
3. Press the “ (4)” button again to hang up the redial call.
4. Make sure that your mobile phone has have last dial call used, if not,
the redial for last call function cannot be activated.
I. Low Power Reminder And Auto Sleep
1. The Bluetooth Speaker will send announcement “Low battery please
recharge” out from speaker by every minute. When you heard this
reminder, please connect the device to the USB power for charging, if
you still want to use the device.
2. If not, the Bluetooth Speaker will power Off automatically when the
battery is keeping low energy level in some minutes.
3. In this case, the device cannot be turned On, until you recharging the
battery at least 10 ~ 15 minutes, because the rechargeable battery
has not enough energy.
J. AUX IN Function
1. In power ON mode, connect the Bluetooth Speaker’s “AUX IN Jack
(4)” with an external device’s “Earphone / AUX / LINE” Output
through the Audio cable (Supplied).
2. The Bluetooth Speaker will switch to “AUX In” mode automatically
from Bluetooth mode, and the “AUX In LED (1)” indicator will light up
instead of the “Bluetooth LED (2)” indicator.
3. Now the “AUX In” Function is ready, start to music play from your
external device by it control and or program, for example, Play, Stop,
volume control…etc.
4. You also can use Bluetooth Speaker control;
5. Press and hold the “ (8)” button to increases the volume level.
6. Press and hold the “ (7)” button to decreases the volume level.
7. When maximum or minimum volume is reached, a series of tones will
sound.
8. Disconnect the Audio cable when it is done.
K. Reset the device
1. In some circumstances the device’s function may hanging and need to
reset. To reset the Bluetooth speaker;
2. Press and hold the “ (7)” button and “ (8)” button at the same
time. The device is reset and will turn Off automatically.
BTS-32 BM3251_AUX In_20140729 V1.0
7
3. After that turn On the Bluetooth Speaker by press and hold the “
(3)” button.
Important: Do not reset the device if it is proper working.
L. Splash Proof Handling
1. The Bluetooth Speaker can handle a brief jet of water on its surface
(IPX4 water resistant). However, it should never be operated under
running water and under no circumstance it should never be fully
immersed in water. Before use the Shower Bluetooth speaker in
bathroom, make sure that the splash proof “Rubber Seal Cover (12)”
it tighten closed at the right position.
2. After used in bathroom, always wipe the outside of the cabinet
thoroughly if it becomes wet with moisture or water splashes. This
will help to prevent the internal parts of the unit from entry of water
and possible moisture damage.
M. Trouble Shooting
No power • Check battery is it charged with enough
energy.
• Check whether the device is in power OFF
mode.
No sound
• Check whether volume level is in lower
position on your speaker and mobile
phone or PC/Mac.
• Make sure that your Bluetooth device is
within the effective operation range.
• Check whether the Bluetooth device is
paired.
• Check whether the Bluetooth device show
connected.
• Check if you have selected the correct
audio source.
No response from speaker
• Restart the speaker by power Off and On.
N. Specification
Dimension 223 mm (L) x 60 mm (D) x 66.5 mm (H)
Weight 472.5g (Approximate)
Specification V2.1 + EDR
Supported Profile A2DP, AVRCP, HSP
Bluetooth
Connection Distance
In 10 meters (open area)
Lithium 3.7V, 1500mAh
Built-In Battery Playing Time: 3 ~ 4 Hours (at 75 ~ 80% of
volume setting)
BTS-32 BM3251_AUX In_20140729 V1.0
8
Micro USB Port
Power Source PC’s USB port Power or DC 5V 500mA
Output Power 3W (RMS) x 2 (4 Ohm)
Audio Frequency
Responses
100Hz to 20,000Hz
I/O Audio In Link 600mV RMS, 10K Ohm
Operating Temperature
0 to 40℃
O. Disclaimer
Updates to Firmware and/or hardware components are made
regularly. Therefore some of the instruction, specifications and pictures in
this documentation may differ slightly from your particular situation. All
items described in this guide for illustration purposes only and may not
apply to particular situation. No legal right or entitlements may be
obtained from the description made in this manual.
P. Recycling
This symbol indicates that the relevant electrical product
or battery should not be disposed of as general
household waste in Europe. To ensure the correct waste
treatment of the product and battery, please dispose
them in accordance to any applicable local laws of
requirement for disposal of electrical equipment or
batteries. In so doing, you will help to conserve natural
resources and improve standards of environmental
protection in treatment and disposal of electrical waste
(Waste Electrical and Electronic Equipment Directive).
FCC Warning Statement
Changesormodificationsnotexpresslyapprovedbythepartyresponsiblefor
compliancecouldvoidtheuser’sauthoritytooperatetheequipment.
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigital
device,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovide
reasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.This
equipmentgeneratesusesandcanradiateradiofrequencyenergyand,ifnotinstalledand
usedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradio
communications.However,thereisnoguaranteethatinterferencewillnotoccurina
particularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioor
televisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,the
userisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowing
measures:‐‐Reorientorrelocatethereceivingantenna.
‐‐Increasetheseparationbetweentheequipmentandreceiver.‐‐Connecttheequipment
intoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.‐‐Consult
thedealeroranexperiencedradio/TVtechnicianforhelp.