User Manual
BTS-05 TCH Module User Manual 20150408 V1.2
User’s Manual
Model: BTS-40 MW232
Shower Bluetooth Speaker
With
FM Radio
(Splash-Proof)
Transmit music to your shower with our Shower Bluetooth Speaker.
Splashes proof design allows for all-round bathroom usage. The hanging
window design makes hanging in the shower quick and easy.
BTS-05 TCH Module User Manual 20150408 V1.2
1.
Important
Don’ts
• Do not place naked flames, such as lighted candles on or near the
product.
• Do not place objects filled with liquids, such as vases on or near the
product.
• Do not use or store this product in a place where it is subject to direct
sunlight, heat, excessive dust or vibration.
• Do not keep or store this product in wet conditions for long period.
• Do not push foreign objects into the slots or holes in the product.
• Do not attempt to open this product yourself. There are no user
serviceable parts inside.
• Do not allow children access to plastic bags.
Safety Instructions
• Before using this product, read and follow all warnings and
instructions.
• This product is not intended for use by young children. Young children
should be properly supervised.
• This product is intended for household use only and not for
commercial or industrial use.
• No naked flame sources, such as lighted candles, should be placed on
the product.
• Ventilation should not be impeded by covering ventilation openings
with items such as newspapers, table cloths, curtains and the like.
• Make sure the unit is adjusted to a stable position. Damage caused by
using this product in an unstable position or by failure to follow any
other warning or precaution contained within this user manual will
not be covered by warranty.
We, suggests retaining the packaging in case for future transport of the
product.
WARNING:
•
Never remove the casing of this apparatus.
• Never place this apparatus on the other electrical
equipment.
Caution for Splash-proof
• This unit has been constructed to resist mild steam and light splashes
from the shower or bath only. It should never be operated under
running water and under no circumstances it should never be fully
immersed in water.
• This unit has rubber seals to minimize the risk of moisture getting
inside. However, do not immerse it in water since permanent damage
to the electrical and mechanical parts will result.
BTS-05 TCH Module User Manual 20150408 V1.2
2.
Gett
ing Start
A. Outlook and Controls:
1. Hanging Window (For Lanyard / Hand Up)
2. Button (Power Off / On)
3. Charging LED (Red)
4. Button (Volume Down)
5. Button (Previous, Tune Down)
6. Button (Play / Pause, Hand-Free, Radio Mode / Channel Select)
7. Button (Next, Tune Up)
8. Button (Volume Up)
9. Mode LED (Power / Bluetooth Mode, Radio Mode)
10. Speaker
11. MIC (for Handset)
12. Rubber Seals (Splashes Proof Cover)
13. Micro USB (Inside Splash Proof cover)
B. About the speaker rechargeable battery:
1. This Bluetooth Speaker has an internal, non–user-replaceable battery.
For best results, the first time you use this Bluetooth Speaker, let it
charge for about 2 - 3 hours or until the charging indicator color is
changed to Green from RED which show you the battery is fully
charged.
2. For maintain the battery life and performance, if speaker isn’t used for
BTS-05 TCH Module User Manual 20150408 V1.2
a while, the battery might need to be recharged. Recharge the battery
at least once per month.
C. To recharge the built-in rechargeable battery:
You can charge the Bluetooth Speaker’s battery in two ways:
1. Connect Bluetooth Speaker to the Computer. Or,
2. Use the USB power charger. (not included)
D. Connection and Charging:
1. Open the Rubber Seal Cover (12) and connects the Bluetooth
Speaker’s Micro USB connector (13) with the Computer’s USB port
through USB cable (supplied).
2. The charging LED (3) turns ON in red light. (make sure that the
computer is turned ON)
3. The charging LED (3) will switch to green light when it’s fully changed.
4. Disconnect the USB cable when it is done.
Charging LED Function
Item
Mode
Light Status
1.
N
o DC power input:
LED light OFF
2.
In Charging:
Light On in red color
3.
Charge Completed:
Light color from red switch to green
E. Power ON/OFF and Pairing:
1. Press and hold (2) button for 2 ~ 3 seconds to turn “ON” the
Bluetooth speaker, a series of tones will sound and the mode LED
indicator (9) will light up with blinking blue (half second once)
simultaneously. It is in Bluetooth searching and pairing mode.
2. Then, activate the Bluetooth function in your mobile Bluetooth device
(such as Mobile Phone, MID or Personal Computer); the mobile device
will enter to Bluetooth searching mode automatically, if not, tap the
relate selection to manually enter to searching mode. (refer to your
mobile device’s manual when necessary)
3. Your mobile Bluetooth device should show “MRX-MW232” in list, and
then select it for pairing. Waiting for some seconds, then you will see
connected message as shown on your mobile Bluetooth device and a
series of tones will sound from the Bluetooth speaker when they
connected and paired.
4. For some mobile Bluetooth devices, you may need to input “0000” as
pairing password. Once devices paired, the Bluetooth Speaker will
beeps twice and the mode LED stays steadily ON with flashing in 2
seconds once, the device is in paired. (pairing need time will depend
on the difference type / brand of device be used)
BTS-05 TCH Module User Manual 20150408 V1.2
5. Now, you can start to music play on your Bluetooth device when the
device is in paired and show connected.
6. To turn “OFF” the Bluetooth Speaker, press and hold (2) button for
2 ~ 3 seconds, a series of tones will sound, the mode LED (9) and the
device will turn OFF
simultaneously.
Power & Mode Indicator Function:
Item
Mode
Description
Light Status
1.
Power OFF
Light OFF.
2. Power ON
At Bluetooth
searching mode:
Blue light On & blinking
(half s
econd once)
At Bluetooth
paired mode
Blue light On & blinking
(2 seconds once)
At Radio mode
Red light On
Note: In some circumstances, the Bluetooth connection may break /
disconnected; such as some strong interference, beyond the connection
distance or object moving in between both Bluetooth devices. However,
most of devices can be reconnected in some seconds automatically, but in
experience some of device may need to reconnect it by using the
Bluetooth device’s list menu manually.
Besides, since there have many Bluetooth versions could be installed into
difference type/brand of PCs, and also connect methods will have
differences. If you cannot connect your Bluetooth devices, please install
with updated Bluetooth driver into your PC or contact your dealer’s help
desk for enquiry.
F. Disconnect from paired device
1. To disconnect with paired device and for better result, turn OFF the
Bluetooth Speaker by power OFF directly.
2. Or, you can choose disconnect from the Bluetooth device’s list by the
paired device, however, most devices will go back to reconnection
mode in seconds. Means the Bluetooth Speaker may again
reconnected with the paired device within some seconds
automatically. So, turn OFF the Bluetooth function from the paired
device in this case if you want.
Note: The device is keep using battery energy if it is in power ON mode,
Turn OFF the Bluetooth Speaker by the power button if you do not use the
device for a while. Besides, the Bluetooth speaker will be turned to OFF
automatically if it is in idle and without Bluetooth connection in few
minutes.
BTS-05 TCH Module User Manual 20150408 V1.2
G. Auto reconnect with paired device:
1. Every time you turn On the Bluetooth speaker power; it will firstly
searching for the mobile device, which has been paired previously
and still in record. The Bluetooth Speaker will reconnect this mobile
device as priority if it is in Bluetooth searching device mode.
2. If not found in some seconds, the Bluetooth Speaker then is turn into
new pairing mode internally.
3. Now you can process for new mobile device pairing, please refer to
item E.2~5 methods mentioned above.
H. Bluetooth Device Control Function:
On your Bluetooth Device:
1. Switch to music play mode and choose music to start the play, select
music by using / button/icon, Play/Pause the playing music
by using button/icon and adjust the volume level by using device’s
volume control “ Down / Up ” button/icon on your Bluetooth device.
(refer to your device user’s manual when necessary)
On Bluetooth Speaker:
2. In playing music, press button (6) to pause music, press it once
again to play.
3. Pressing or press and hold the button (8) to increases the volume
level.
4. Pressing or press and hold the button (4) to decreases the volume
level.
5. When maximum or minimum volume is reached, a beep sound will be
heard.
6. Press the button (7) to play next music file.
7. Press the button (5) to play previous music file.
I. Hand Free Function
1. When there is an incoming call;
2. The ringing sound will up and the playing music will pause
automatically.
3. Press button (6) to pick up the call if you want.
4. Now you have hand free function with the Bluetooth speaker.
5. Press button (6) again to hand up the call when finished. And,
6. The paused music will start to play automatically.
Tip: speak to the MIC (11) direct with distance in 30~60 cm to get the best
speakerphone performance when necessary.
J. Redial for Last Call
When you want to redial for last called number by the Bluetooth
Speaker;
BTS-05 TCH Module User Manual 20150408 V1.2
1. To redial for last called number by the Bluetooth Speaker, even it is in
music playing mode.
2. Press twice the button (6) to enter into redial function, the
playing will pause and switch to hand free function for redial.
3. Press the button (6) again to hang up the redial call.
4. Mare sure that your mobile phone has have last dial call used, if not,
the redial for last call function cannot be activated.
K. FM Radio Function
1. Switch to FM Radio function:
• In power On / Bluetooth mode, press and hold the (6) button for
2 ~ 3 seconds to switch into FM radio, a voice announce “radio” from
speaker and the mode LED (9) switch to light red from blue. It is in FM
Radio function.
• Press and hold (6) button for 2 ~ 3 seconds again to return into
Bluetooth mode.
2. Manual Tune / Search Station(s):
• In FM Radio mode, press the (5) / (7) button for searching
down / up to receive next radio frequency, each press will step down /
up by 0.1MHz.
• Press the (5) / (7) button quickly until to your desired radio
frequency of radio station.
3. Auto Tune / Search and Auto Preset Stations:
• In FM radio mode, press and hold (5) / (7) button for 2 ~ 3
seconds to enter into auto search and auto preset stations, a voice
announce “Radio Channel Searching” from speaker and the mode
LED (9) will blinking red, the radio is in searching radio stations in
range of frequency “87.5MHz – 108MHz” simultaneously.
• The radio’s searching will end and go to the first received radio station
for listening and all found radio stations will be preset and stored into
device’s memory automatically.
4. Change the Preset Stations:
• Press the (6) button to change up to next preset station from
current receiving preset station.
• Each press the
(6)
button will change to next preset station.
5. Adjust Volume:
• Pressing or press and hold the button (8) to increases the volume
level.
• Pressing or press and hold the button (4) to decreases the volume
level.
L. Low power reminder and auto sleep:
1. The Bluetooth Speaker will send tones sound, if the rechargeable
BTS-05 TCH Module User Manual 20150408 V1.2
lithium battery running at low energy level, when you heard this
sounds from speaker please connect the device to the computer /
power charger through the USB cable if you still want to use the
device.
2. If not, the Bluetooth Speaker will turn off the device automatically
when battery is keeping at low level in few minutes.
3. In this case, the device cannot be turned On, until you recharging the
battery at least 10 ~ 15 minutes, because the rechargeable battery has
not enough energy.
M. Reset the Bluetooth Speaker
1. In some circumstances the device’s function may hanging and need to
reset. To reset the Bluetooth speaker;
2. Press and hold the (5) / (7) buttons at the same time. The
device is reset and will turn Off and then turn On automatically.
3. If not, turn On the Bluetooth Speaker by press and hold the (2)
button.
Important: Do not reset the device if it is proper working
N. Splash-proof Design and Handling
1. The Bluetooth Speaker’s splash-proof material and mechanical design
allow you can place your Bluetooth Speaker on the wet part of your
bathroom.
2. The Bluetooth Speaker can handle a brief jet of water on its surface.
However, it should never be operated under running water and under
no circumstances it should never be fully immersed in water.
3. Before use this Bluetooth Speaker in bathroom, make sure that the
splash-proof rubber seals cover is tighten closed at the right position.
4. After used in bathroom, always wipe the outside of the cabinet
thoroughly if it becomes wet with moisture or water splashes. This will
help to prevent the internal parts of the unit from entry of water and
possible moisture damage.
3.
Trouble Shooting
No powe
r
•
Check battery is it charged with enough energy.
•
Check whether the device is in
power OFF
mode.
No sound
•
Check whether
volume
level is in lower position
on your speaker and mobile phone or PC/Mac.
• Make sure that your Bluetooth device is within
the effective operation range.
• Check whether the Bluetooth device is paired.
• Check whether the Bluetooth device show
connected.
BTS-05 TCH Module User Manual 20150408 V1.2
•
Check if you have selected the correct audio
source.
No response from
speaker
•
Reset
the
Bluetooth
speaker by
using reset
function
.
4.
Sp
ecification
Dimension
105
mm (H) x
90
.5
mm (W) x
50
mm (D)
(Approximate)
Weight
152
g (Approximate)
Bluetooth
Specification
V
2.1
+ EDR
Supported Profile
A2DP
, AVRCP
,
HSP
/
HFP
Connection
Distance
In 10 meters (open area)
Built-In Battery
Lithium 3.7V,
50
0
mAh
Playing Time:
2
–
3 Hours
(at 75~80% volume level)
Power Source
Micro USB
PC’s USB port Power or DC 5V, 500mA
Audio
Output Power
RMS 2W at 3 Ohm
Max. 2.5 ~ 3W
Frequency
Responses
10
0
Hz to 20
,
000Hz
Radio
FM
87.5MHz~108MHz, step 0.1MHz
Op
erating
Temperature
0 to 40
℃
5.
Disclaimer
Updates to Firmware and/or hardware components are made regularly.
Therefore some of the instruction, specifications and pictures in this
documentation may differ slightly from your particular situation. All items
described in this guide for illustration purposes only and may not apply to
particular situation. No legal right or entitlements may be obtained from
the description made in this manual
6.
Recycling
If at any time in the future you should need to dispose
of this product, please note that: Waste electrical products
should not be disposed of with household waste. Please
recycle where facilities exist. Check with your Local
Authority or Retailer for recycling advice. (Waste Electrical
and Electronic Equipment Directive)
FCCWarningStatement
Changesormodificationsnotexpresslyapprovedbythepartyresponsiblefor
compliancecouldvoidtheuser’sauthoritytooperatetheequipment.
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,
pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonable
protectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates
usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewith
theinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereis
noguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoes
causeharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedby
turningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferenceby
oneormoreofthefollowingmeasures:‐‐Reorientorrelocatethereceivingantenna.
‐‐Increasetheseparationbetweentheequipmentandreceiver.‐‐Connecttheequipmentinto
anoutletonacircuitdifferentfromthattowhichthereceiverisconnected.‐‐Consultthe
dealeroranexperiencedradio/TVtechnicianforhelp.