Richen S2S6 Bluetooth Speaker User Manual S6 Instruction Manual
Richen Industrial Co.,Ltd Bluetooth Speaker S6 Instruction Manual
Richen >
User Manual
S6 Instruction Manual
Thank you for choosing our product. Please read the instruction manual
before using and keep it properly for your reference.
■Main features and Technical Parameters
·Product Model：S6
·Dimensions：：181MM*74MM*31MM
·Unit Weight:：240G
·Built-in Lithium battery: 3.7V/1000mAh
·Charge Jack：Micro USB
·Charge Voltage：DC5V
·Charge Current：500mA
·Charger Time：About 2.5hour
·Playing Time: About 8hours at 70%volume
·Audio Output Power: 3W*2
·Speaker：4Ω3W*2
·Frequency Response：100Hz～20KHz
·10 meters operation range
·Bluetooth version：BK8000L; Bluetooth v2.1+EDR/ A2DP/ AVRCP/ HFP
■Product Illustration
Key functions：1) Status Indicator / 2) Multifunction Button/ 3) Volume
（+）/ 4) Volume（-）/ 5 )Power on/ 6 )MIC /7)Charging Indicator/ 8) MICRO
Charging plug/ 9) LINE IN Port
■Operating Instructions
Power on：Long press for 2 seconds until one blue indicator is on
Power off：Long press for 3 seconds until one red indicator is on
Pairing：Long press for until red and blue light flash quickly
Bluetooth name:S6
Volume adjustment：Press and hold "+" button to increase the volume ；
Press and hold "-" button to decrease the volume
Song choosing：Press "+" button to play next music；
Press "-" button to play previous music
Play/Pause：Press to pause the music, press again to resume play
Answer /End the call：Press to answer the call, and press again to
end the call and resume play music，
Reject an incoming call：Long press for 2s
Tail number redial：Press twice quickly, then it will dial the latest
dial number
■LED indictor
Low battery： When battery is lower than20%, red light on
Charging：When the product is charging, red light will be on，when the
charging is finish, Red light will on off.
Bluetooth has connected： Blue light flash slowly
Bluetooth automatic connect ： Blue light is on
Bluetooth pair ： Red light and blue light flash
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible
for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
‐‐Reorient or relocate the receiving antenna.
‐‐Increase the separation between the equipment and receiver.
‐‐Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
‐‐Consult the dealer or an experienced radio/TV technician for help.