Ricoh PRSPC252DN1 Part15 Subpart B-Printer User Manual BBP PRSPC252DN1 1
Ricoh Company Ltd Part15 Subpart B-Printer BBP PRSPC252DN1 1
Ricoh >
Contents
- 1. BBP-PRSPC252DN1_User Manual 1
- 2. BBP-PRSPC252DN1_User Manual 2
BBP-PRSPC252DN1_User Manual 1
![](/img.php?id=2134301&img=bg1.png)
Operating Instructions
For safe and correct use, be sure to read "Safety Information" before using the machine.
![](/img.php?id=2134301&img=bg3.png)
TABLE OF CONTENTS
How to Read This Manual................................................................................................................................. 7
Introduction..................................................................................................................................................... 7
Legal Prohibition.............................................................................................................................................7
Disclaimer........................................................................................................................................................7
Differences in Functions between Different Models.....................................................................................8
Note to Administrator.....................................................................................................................................8
About IP Address............................................................................................................................................9
List of Option...................................................................................................................................................9
Model-Specific Information.............................................................................................................................10
Important Safety Instructions ...................................................................................................... 11
User Information on Electrical & Electronic Equipment.............................................................................11
Environmental Advice for Users..................................................................................................................11
Note for the Battery and/or Accumulator Symbol (For EU countries only)............................................12
Important Safety Instructions .......................................................................................................13
Notes to Users in the State of California....................................................................................................13
ENERGY STAR Program..................................................................................................................................14
Saving Energy.............................................................................................................................................. 14
1. Getting Started
Guide to Components......................................................................................................................................17
Exterior: Front View......................................................................................................................................17
Exterior: Rear View...................................................................................................................................... 19
Interior...........................................................................................................................................................20
Control Panel................................................................................................................................................21
Installing the Machine......................................................................................................................................22
Where to Put the Machine.......................................................................................................................... 22
Installing Option...............................................................................................................................................25
Attaching Paper Feed Unit.......................................................................................................................... 25
About Operation Tools.................................................................................................................................... 28
Configuring Network Settings.........................................................................................................................29
Configuring the IP Address Settings........................................................................................................... 29
Sharing the Printer on a Network............................................................................................................... 33
Wireless LAN Setup.....................................................................................................................................34
Restricting Machine Functions According to User......................................................................................... 37
1
![](/img.php?id=2134301&img=bg4.png)
Enabling the User Restriction Settings.........................................................................................................37
When Machine Functions are Restricted........................................................................................................40
2. Loading Paper
Supported Paper.............................................................................................................................................. 41
Specifications of Paper Types.....................................................................................................................44
Non-Recommended Paper Types...................................................................................................................51
Print Area.......................................................................................................................................................... 52
Loading Paper.................................................................................................................................................. 54
Loading Paper into Tray1 and 2................................................................................................................ 54
Loading Paper into Bypass Tray................................................................................................................. 58
Loading Envelopes.......................................................................................................................................59
Specifying Paper Type and Paper Size Using Control Panel...................................................................61
3. Printing Documents
Basic Operation............................................................................................................................................... 65
Canceling a Print Job...................................................................................................................................65
If a Paper Mismatch Occurs............................................................................................................................67
Continuing Printing Using Mismatched Paper........................................................................................... 67
Resetting the Print Job.................................................................................................................................. 68
Printing Confidential Documents..................................................................................................................... 69
Storing a Locked Print file............................................................................................................................69
Printing a Locked Print File...........................................................................................................................70
Deleting a Locked Print File......................................................................................................................... 70
Checking which Locked Print File Jobs Have Been Canceled..................................................................71
Direct Printing from a Digital Camera (PictBridge)........................................................................................73
What Is PictBridge?......................................................................................................................................73
PictBridge Printing........................................................................................................................................ 73
What Can Be Done on this Machine......................................................................................................... 74
Exiting PictBridge......................................................................................................................................... 74
When PictBridge Printing Does Not Work.................................................................................................75
Using Various Print Functions...........................................................................................................................77
Print Quality Functions................................................................................................................................. 77
Print Output Functions..................................................................................................................................78
2
![](/img.php?id=2134301&img=bg5.png)
4. Configuring the Machine Using the Control Panel
Basic Operation............................................................................................................................................... 81
Menu Chart.......................................................................................................................................................82
Paper Input Menu.............................................................................................................................................83
List/Test Print Menu..........................................................................................................................................86
Printing the Configuration Page..................................................................................................................86
Types of Lists/Reports..................................................................................................................................86
Maintenance Menu......................................................................................................................................... 88
System Menu.................................................................................................................................................... 89
Host Interface Menu........................................................................................................................................ 92
PCL Menu..........................................................................................................................................................96
PS Menu............................................................................................................................................................98
Language Menu...............................................................................................................................................99
Changing the Language Menu...................................................................................................................99
5. Configuring the Machine Using Web Image Monitor
Using Web Image Monitor...........................................................................................................................101
Displaying Top Page..................................................................................................................................... 102
Changing the Interface Language........................................................................................................... 103
Checking the System Information................................................................................................................. 104
Status Tab...................................................................................................................................................104
Counter Tab............................................................................................................................................... 105
Machine Information Tab......................................................................................................................... 107
Configuring the System Settings................................................................................................................... 108
Tray Paper Settings Tab............................................................................................................................ 108
I/O Timeout Tab....................................................................................................................................... 111
Black-and-White Print Priority Tab...........................................................................................................111
Restricting Machine Functions According to User.......................................................................................112
Configuring the Network Settings................................................................................................................ 113
Network Status Tab...................................................................................................................................113
IPv6 Configuration Tab.............................................................................................................................114
Network Application Tab......................................................................................................................... 114
DNS Tab.................................................................................................................................................... 115
Auto E-mail Notification Tab.................................................................................................................... 116
3
![](/img.php?id=2134301&img=bg6.png)
SNMP Tab................................................................................................................................................. 117
SMTP Tab...................................................................................................................................................118
POP3 Tab...................................................................................................................................................118
Wireless Tab.............................................................................................................................................. 119
Configuring the IPsec Settings.......................................................................................................................121
IPsec Global Settings Tab.........................................................................................................................121
IPsec Policy List Tab...................................................................................................................................121
Printing Lists/Reports..................................................................................................................................... 125
Configuring the Administrator Settings.........................................................................................................126
Administrator Tab...................................................................................................................................... 126
Reset Settings Tab......................................................................................................................................126
Backup Setting Tab................................................................................................................................... 126
Restore Setting Tab....................................................................................................................................127
Energy Saver Mode Tab.......................................................................................................................... 128
PCL6 Mode................................................................................................................................................128
6. Maintaining the Machine
Replacing the Print Cartridge........................................................................................................................129
Replacing the Waste Toner Bottle................................................................................................................ 134
Replacing a Component............................................................................................................................... 140
Replacing the Intermediate Transfer Unit.................................................................................................140
Replacing the Fusing Unit and Transfer Roller........................................................................................ 140
Cautions When Cleaning..............................................................................................................................141
Cleaning the Toner Density Sensor.............................................................................................................. 142
Cleaning the Friction Pad and Paper Feed Roller....................................................................................... 144
Cleaning the Registration Roller and Paper Tray........................................................................................ 147
7. Troubleshooting
Removing Paper Jams....................................................................................................................................151
Removing Printing Jams.............................................................................................................................151
Common Problems.........................................................................................................................................157
Paper Feed Problems.....................................................................................................................................158
Print Quality Problems................................................................................................................................... 161
Checking the Condition of the Machine..................................................................................................161
Checking the printer driver settings..........................................................................................................162
4
![](/img.php?id=2134301&img=bg7.png)
Printer Problems............................................................................................................................................. 164
When You Cannot Print Properly............................................................................................................. 164
When You Cannot Print Clearly...............................................................................................................167
When Paper Is Not Fed Properly.............................................................................................................170
Other Printing Problems............................................................................................................................ 171
Error & Status Messages on the Control Panel............................................................................................172
Panel Indicator...............................................................................................................................................176
8. Appendix
Functions and Network Settings Available in an IPv6 Environment.......................................................... 177
Available Functions................................................................................................................................... 177
Transmission Using IPsec...............................................................................................................................178
Encryption and Authentication by IPsec.................................................................................................. 178
Security Association.................................................................................................................................. 179
Encryption Key Exchange Settings Configuration Flow......................................................................... 180
Specifying Encryption Key Exchange Settings........................................................................................180
Specifying IPsec Settings on the Computer............................................................................................. 181
Enabling and Disabling IPsec Using the Control Panel..........................................................................183
Notes About the Toner.................................................................................................................................. 184
Moving and Transporting the Machine....................................................................................................... 185
Disposal......................................................................................................................................................185
Where to Inquire....................................................................................................................................... 186
Consumables..................................................................................................................................................187
Print Cartridge............................................................................................................................................187
Waste Toner Bottle....................................................................................................................................189
Specifications of the Machine...................................................................................................................... 190
General Function Specifications.............................................................................................................. 190
Printer Function Specifications..................................................................................................................192
Specifications of Options.............................................................................................................................. 193
Paper Feed Unit TK1010..........................................................................................................................193
Copyright Information about Installed Applications...................................................................................194
expat...........................................................................................................................................................194
Iperf............................................................................................................................................................ 194
WPA Supplicant........................................................................................................................................ 195
5
![](/img.php?id=2134301&img=bg8.png)
Trademarks.....................................................................................................................................................197
INDEX...........................................................................................................................................................199
6
![](/img.php?id=2134301&img=bg9.png)
How to Read This Manual
Introduction
This manual contains detailed instructions and notes on the operation and use of this machine. For your
safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy
place for quick reference.
Legal Prohibition
Do not copy or print any item for which reproduction is prohibited by law.
Copying or printing the following items is generally prohibited by local law:
bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses.
The preceding list is meant as a guide only and is not inclusive. We assume no responsibility for its
completeness or accuracy. If you have any questions concerning the legality of copying or printing
certain items, consult with your legal advisor.
Disclaimer
Contents of this manual are subject to change without prior notice. In no event will the company be
liable for direct, indirect, special, incidental, or consequential damages as a result of handling or
operating the machine.
To the maximum extent permitted by applicable laws, in no event will the manufacturer be liable for any
damages whatsoever arising out of failures of this machine, losses of the registered data, or the use or
non-use of this product and operation manuals provided with it.
Make sure that you always copy or have backups of the data registered in this machine. Documents or
data might be erased due to your operational errors or malfunctions of the machine.
In no event will the manufacturer be responsible for any documents created by you using this machine or
any results from the data executed by you.
For good output quality, the manufacturer recommends that you use genuine toner from the
manufacturer.
The manufacturer shall not be responsible for any damage or expense that might result from the use of
parts other than genuine parts from the manufacturer with your office products.
Two kinds of size notation are employed in this manual.
Some illustrations or explanations in this guide may differ from your product due to improvement or
change in the product.
7
![](/img.php?id=2134301&img=bga.png)
Differences in Functions between Different Models
The differences in main functions between different models are as follows:
SP C250DN SP C252DN
Type Type 1 Type 2
Restrictions on available functions Not available Available
User Restriction Not available Available
Locked Print Not available Available
Notification to replace a component
(Fusing unit, Transfer roller, Intermediate transfer belt)
Not available Available
Note to Administrator
Password
Certain configurations of this machine can be password-protected to prevent unauthorized modifications
by others. We strongly recommend you to create your own password immediately.
The following are the operations that can be password-protected:
• Configuring the [System Settings], [Restrict Available Functions], [Network Settings], [IPsec
Settings], or [Administrator Tools] menu using Web Image Monitor
By default, the access to the machine via Web Image Monitor is not password-protected.
The setting for configuring the password can be found in [Administrator Settings].
• For details about setting a password, see page 126 "Configuring the Administrator Settings".
User Restriction
You can restrict the use of certain functions of this machine to users with proper authentication.
Using Web Image Monitor, you can select the functions you want to restrict, and register the users who
can use that function upon authentication.
• For details about creating passwords and configuring the user restriction settings, see page 37
"Restricting Machine Functions According to User".
8
![](/img.php?id=2134301&img=bgb.png)
About IP Address
In this manual, "IP address" covers both IPv4 and IPv6 environments. Read the instructions that are
relevant to the environment you are using.
List of Option
Option List Referred to as
Paper Feed Unit TK1010 Paper feed unit
• If Paper feed unit is attached, "Tray 2" appears on the machine's control panel.
9
![](/img.php?id=2134301&img=bgc.png)
Model-Specific Information
This section explains how you can identify the region your machine belongs to.
There is a label on the rear of the machine, located in the position shown below. The label contains
details that identify the region your machine belongs to. Read the label.
DAC029
The following information is region-specific. Read the information under the symbol that corresponds to
the region of your machine.
(mainly Europe and Asia)
If the label contains the following, your machine is a region A model:
• CODE XXXX -27
• 220-240V
(mainly North America)
If the label contains the following, your machine is a region B model:
• CODE XXXX -17
• 120-127V
• Dimensions in this manual are given in two units of measure: metric and inch. If your machine is a
Region A model, refer to the metric units. If your machine is a Region B model, refer to the inch
units.
10
![](/img.php?id=2134301&img=bgd.png)
Important Safety Instructions
User Information on Electrical & Electronic Equipment
Users in the countries where this symbol shown in this section has been specified in
national law on collection and treatment of E-waste
Our Products contain high quality components and are designed to facilitate recycling.
Our products or product packaging are marked with the symbol below.
The symbol indicates that the product must not be treated as municipal waste. It must be disposed of
separately via the appropriate return and collection systems available. By following these instructions
you ensure that this product is treated correctly and help to reduce potential impacts on the environment
and human health, which could otherwise result from inappropriate handling. Recycling of products
helps to conserve natural resources and protect the environment.
For more detailed information on collection and recycling systems for this product, please contact the
shop where you purchased it, your local dealer or sales/service representatives.
All Other Users
If you wish to discard this product, please contact your local authorities, the shop where you bought this
product, your local dealer or sales/service representatives.
Environmental Advice for Users
Users in the EU, Switzerland and Norway
Consumables yield
Please refer to either the User’s Manual for this information or the packaging of the consumable.
Recycled paper
The machine can use recycled paper which is produced in accordance with European standard
EN 12281:2002 or DIN 19309. For products using EP printing technology, the machine can print
11
![](/img.php?id=2134301&img=bge.png)
on 64g/m2 paper, which contains less raw materials and represents a significant resource
reduction.
Duplex printing (if applicable)
Duplex printing enables both sides of a sheet of paper to be used. This saves paper and reduces
the size of printed documents so that fewer sheets are used. We recommend that this feature is
enabled whenever you print.
Toner and ink cartridge return program
Toner and ink cartridge for recycling will be accepted free of charge from users in accordance with
local regulations.
For details about the return program, please refer to the Web page below or consult your service
person.
https://www.ricoh-return.com/
Energy efficiency
The amount of electricity a machine consumes depends as much on its specifications as it does on
the way you use it. The machine is designed to allow you to reduce electricity costs by switching to
Ready mode after it prints the last page. If required, it can immediately print again from this mode.
If no additional prints are required and a specified period of time passes, the device switches to an
energy saving mode.
In these modes, the machine consumes less power (watts). If the machine is to print again, it needs
a little longer to return from an energy saving mode than from Ready mode.
For maximum energy savings, we recommend that the default setting for power management is
used.
Products that comply with the Energy Star requirement are always energy efficient.
Note for the Battery and/or Accumulator Symbol (For EU countries only)
In accordance with the Battery Directive 2006/66/EC Article 20 Information for end-users Annex II,
the above symbol is printed on batteries and accumulators.
This symbol means that in the European Union, used batteries and accumulators should be disposed of
separately from your household waste.
In the EU, there are separate collection systems for not only used electrical and electronic products but
also batteries and accumulators.
Please dispose of them correctly at your local community waste collection/recycling centre.
12
![](/img.php?id=2134301&img=bgf.png)
Important Safety Instructions
Notes to Users in the State of California
Perchlorate Material - special handling may apply. See: www.dtsc.ca.gov/hazardouswaste/
perchlorate
13
![](/img.php?id=2134301&img=bg10.png)
ENERGY STAR Program
ENERGY STAR® Program Requirements for Imaging Equipment
The ENERGY STAR® Program Requirements for Imaging Equipment encourage energy conservation
by promoting energy efficient computers and other office equipment.
The program backs the development and dissemination of products that feature energy saving
functions.
It is an open program in which manufacturers participate voluntarily.
Targeted products are computers, monitors, printers, facsimiles, copiers, scanners, and multifunction
devices. Energy Star standards and logos are internationally uniform.
Saving Energy
This machine is equipped with the following Energy Saver modes: Energy Saver mode 1 and Energy
Saver mode 2. If the machine has been idle for a certain period of time, the machine automatically
enters Energy Saver mode.
The machine recovers from Energy Saver mode when it receives a print job or when any key is pressed.
Energy Saver mode 1
The machine enters Energy Saver mode 1 if the machine has been idle for about 30 seconds. It
takes less time to recover from Energy Saver mode 1 than from power-off state or Energy Saver
mode 2, but power consumption is higher in Energy Saver mode 1 than in Energy Saver mode 2.
Energy Saver mode 2
The machine enters Energy Saver mode 2 after the period of time specified for this setting is
passed. Power consumption is lower in Energy Saver mode 2 than in Energy Saver mode 1, but it
takes longer to recover from Energy Saver mode 2 than from Energy Saver mode 1.
14
![](/img.php?id=2134301&img=bg11.png)
Specifications
Energy Saver mode 1 Power Consumption*1 80 W or less
Default Time 30 seconds
Recovery Time*1 10 seconds or less
Energy Saver mode 2 Power Consumption*1 (mainly Europe and Asia)
3.8 W or less
(mainly North America)
2.7 W or less
Default Time 1 minute
Recovery Time*1 30 seconds
Duplex Function*2 Standard
*1 Recovery time and power consumption may differ depending on the conditions and environment of the
machine.
*2 Achieves ENERGY STAR energy savings; product fully qualifies when packaged with (or used with) a
duplex tray and the duplex function is enabled as an option.
For details about Energy Saver modes, see page 89 "System Menu".
• If the machine is in Energy Saver mode for 24 hours continuously, the machine automatically
returns to normal state and performs self-maintenance.
15
![](/img.php?id=2134301&img=bg12.png)
16
![](/img.php?id=2134301&img=bg13.png)
1. Getting Started
Guide to Components
This section introduces the names of the various parts on the front and rear side of the machine and
outlines their functions.
Exterior: Front View
1
2
3
4
5
6
7
8
9
10
DAC023
1. Top Cover
Open this cover to replace the print cartridge.
2. Control Panel
Contains keys for machine control and indicators that show the machine status.
3. Power Switch
Use this switch to turn the power on and off.
4. Stop Fences
Pull up this fence to prevent paper falling off when printing a large amount of paper at a time. The fence can
be adjusted at the A4/Letter or Legal size position.
17
![](/img.php?id=2134301&img=bg14.png)
5. Standard Tray
Delivered sheets are stacked here with the print side down.
6. Standard Tray Extension
Use this to support sheets that come out curled after they are printed.
Flip open the extension by pushing down on the end that is toward the rear of the machine.
7. Top Cover Open Lever
Open here to replace the print cartridges.
8. Front Cover
Open this cover to replace the waste toner bottle or remove jammed paper.
9. Tray 1
This tray can hold up to 250 sheets of plain paper.
10. Bypass Tray
Load paper here sheet by sheet.
• Pull up the retainer as shown below to prevent A4- or Letter-size prints from falling off.
DAC034
• Pull up the retainer as shown below to prevent Legal-size prints from falling off.
1
2
3
DAC035
1. Getting Started
18
![](/img.php?id=2134301&img=bg15.png)
Exterior: Rear View
1
2
6
7
3
4
5
DAC024
1. Front Cover Open Lever
To open the front cover, pull this lever on the right side of the machine.
2. Cable Cover
Remove this cover when connecting cables to the machine.
3. Ethernet Port
For connecting the machine to the network using a network interface cable.
4. USB Host Interface
Use a USB cable to connect the digital camera to the machine. You can print images directly from a digital
camera, without having to connect to a computer.
5. USB Port
For connecting the machine to a computer using a USB cable.
6. Power Socket
For connecting the power cord to the machine.
7. Rear Cover
Remove this cover when loading paper longer than A4 in Tray 1.
Guide to Components
19
![](/img.php?id=2134301&img=bg16.png)
Interior
1
2
3
4
5
DAC027
1. Print Cartridges
Install the print cartridges from the machine rear, in the order of cyan (C), magenta (M), yellow (Y), and black
(K). Messages appear on the screen when print cartridges need to be replaced, or new ones need to be
prepared.
2. Fusing Unit Lever
Lower both the left and right levers when you print on an envelope.
3. Fusing Unit
Fuses toner to the paper.
You might have to move this unit to check for or remove jammed paper.
4. Waste Toner Bottle
Collects toner that is wasted during printing.
5. Transfer unit
You need to remove this when you replace the waste toner bottle.
• For details about the messages that appear on the screen when consumables need to be replaced,
see page 172 "Error & Status Messages on the Control Panel".
1. Getting Started
20
![](/img.php?id=2134301&img=bg17.png)
Control Panel
DAC527
8 6910
5
1 2 43
7
1. [Stop/Start] key
Press this key to stop receiving incoming data from the computer.
2. [Job Reset] key
Press this key to cancel a job that is currently being printed or received.
3. [Menu] key
Press this key to configure or check the machine settings.
Press the [Menu] key again to return to the initial screen.
4. Display
Displays the current status and messages.
5. [Escape] key
Press this key to cancel an operation or to return to the previous screen.
6. [OK] key
Press this key to confirm settings and setting values, or move to the next menu level.
7. Scroll Keys
Press to scroll the screen or to adjust values.
8. Data In Indicator
Flashes when the machine is receiving data from a computer. The data indicator is lit if there is data to be
printed.
9. Alert Indicator
Lights up in red whenever an error occurs. Check the displayed error message. Flashes in yellow when the
toner has nearly run out.
10. Power Indicator
Remains lit while the power is on. It is unlit when the power is off.
• The color of the control panel varies depending on the model.
Guide to Components
21
![](/img.php?id=2134301&img=bg18.png)
Installing the Machine
Where to Put the Machine
Be careful about where to place the machine, because environmental conditions greatly affect its
performance.
• Do not use flammable sprays or solvents in the vicinity of this machine. Doing so could result in
fire or electric shock.
• Do not place vases, plant pots, cups, toiletries, medicines, small metal objects, or containers
holding water or any other liquids, on or close to this machine. Fire or electric shock could result
from spillage or if such objects or substances fall inside this machine.
• Keep the machine away from humidity and dust. Otherwise a fire or an electric shock might
occur.
• Do not place the machine on an unstable or tilted surface. If it topples over, an injury might
occur.
• Do not place heavy objects on the machine. Doing so can cause the machine to topple over,
possibly resulting in injury.
• Keep the machine in an area that is within optimum environmental conditions. Operating the
machine in an environment that is outside the recommended ranges of humidity and temperature
can cause an electrical fire hazard. Keep the area around the socket free of dust. Accumulated
dust can become an electrical fire hazard.
• Make sure the room where you are using the machine is well ventilated and spacious. Good
ventilation is especially important when the machine is used heavily.
• Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal
components.
• Keep the machine away from salt-bearing air and corrosive gases. Also, do not install the machine
in places where chemical reactions are likely (laboratories, etc.), as doing so will cause the
machine to malfunction.
1. Getting Started
22
![](/img.php?id=2134301&img=bg19.png)
Space Required for Installation
The recommended (or minimum) space requirements are as follows:
33 cm
(13 inches)
10 cm
(4 inches)
10 cm
(4 inches)
70 cm
(27.6 inches)
20 cm
(7.9 inches)
DAC021
Optimum Environmental Conditions
Permissible and recommended temperature and humidity ranges are as follows:
DAC581
• White area: Permissible Range
• Gray area: Recommended Range
To avoid possible build-up of ozone, locate this machine in large well ventilated room that has an
air turnover of more than 30m3/hr/person.
Environments to Avoid
• Areas exposed to direct sunlight or strong light
• Dusty areas
Installing the Machine
23
![](/img.php?id=2134301&img=bg1a.png)
• Areas with corrosive gases
• Areas that are excessively cold, hot, or humid
• Areas directly exposed to currents of hot, cold, or room-temperature air from air conditioners
• Areas directly exposed to radiant heat from heaters
• Locations near air conditioners or humidifiers
• Locations near other electronic equipment
• Locations subject to frequent strong vibration
Ventilation
When you use this machine in a confined space without good ventilation for a long time or print
large quantities, you might detect an odd smell.
This might cause the output paper to also have an odd smell.
When you detect an odd smell, regularly ventilate in order to keep the workplace comfortable.
• Set up the machine so that it does not directly ventilate towards people.
• Ventilation should be more than 30 m3/hr/person.
New machine smell
When a machine is new, it might have a unique smell. This smell will subside in about one week.
When you detect an odd smell, sufficiently ventilate and circulate the air in the room.
Power requirements
• (mainly Europe and Asia) 220 - 240 V, 6 A, 50/60 Hz
• (mainly North America) 120 - 127 V, 11 A, 60 Hz
Please be sure to connect the power cord to a power source as above.
1. Getting Started
24
![](/img.php?id=2134301&img=bg1b.png)
Installing Option
This section explains how to install options.
Attaching Paper Feed Unit
• Touching the prongs of the power cable's plug with anything metallic constitutes a fire and
electric shock hazard.
• It is dangerous to handle the power cord plug with wet hands. Doing so could result in electric
shock.
• Before installing or removing options, always disconnect the power cord plugs from the wall
outlet and allow time for the main unit to fully cool. Failing to take these precautions could result
in burns.
• The machine weighs approximately 23.8 kg (52.5 lb.). When moving the machine, use the
inset grips on both sides, and lift slowly in pairs. The machine will break or cause injury if
dropped.
• Lifting the paper feed unit carelessly or dropping may cause injury.
• Before moving the machine, unplug the power cord from the wall outlet. If the cord is
unplugged abruptly, it could become damaged. Damaged plugs or cords can cause an
electrical or fire hazard.
• Tray 1 is required to print using the optional paper feed unit. Without Tray 1, paper jams will occur.
• The machine must be lifted by two people.
• Do not hold the tray to lift the machine.
Installing Option
25
![](/img.php?id=2134301&img=bg1c.png)
1. Check that the package contains the paper feed unit.
DAC047
2. Turn off the machine's power switch, and then unplug the machine's power cord from the
wall outlet.
3. Remove adhesive tapes from the optional paper feed unit.
DAC048
4. Lift the machine using the inset grips on both sides of the machine.
DAC020
1. Getting Started
26
![](/img.php?id=2134301&img=bg1d.png)
5. There are three upright pins on the optional paper feed unit. Align them with the holes on
the underside of the machine, and then carefully lower the machine.
DAC049
6. After installing the optional paper feed unit, print the configuration page to check the
device configuration.
If it is installed properly, "Tray 2" will appear under "Paper Input" on the configuration page.
• After installing the optional paper feed unit, select Tray 2 in the printer driver. For details, see the
printer driver Help.
• If the new device is listed in the column of configuration options, it has been properly installed.
• If the optional paper feed unit is not installed properly, try to install it again by repeating the
procedure. If the problem persists, contact your sales or service representative.
• For details about printing the configuration page, see page 86 "List/Test Print Menu".
Installing Option
27
![](/img.php?id=2134301&img=bg1e.png)
About Operation Tools
This section explains the operation tools of this machine.
Control Panel
The control panel contains a screen and keys for controlling the machine. Using the control panel, you
can configure the machine's various settings. For details about how to use the control panel, see
page 81 "Configuring the Machine Using the Control Panel".
Web Image Monitor
You can check the machine's status and configure its settings by accessing the machine via Web Image
Monitor. For details about how to use Web Image Monitor, see page 101 "Configuring the Machine
Using Web Image Monitor".
1. Getting Started
28
![](/img.php?id=2134301&img=bg1f.png)
Configuring Network Settings
This section describes configuring the settings required to use the machine on a network.
Configuring the IP Address Settings
The procedure for configuring network settings differs depending on whether the IP address is assigned
automatically by the network (DHCP), or is specified manually.
• You can press the [Escape] key to exit to the previous level of the menu tree.
• If your network environment requires a specific transmission speed that is not automatically
detected, specify the transmission speed in [Ethernet Speed] under [Network Setting].
• Configure the IP address setting first, then install the driver. For details about installing the driver,
see the Driver Installation Guide.
• For details about printing the configuration page, see page 86 "List/Test Print Menu".
Specifying settings to receive an IPv4 address automatically
• A DHCP server is required on the network for the machine to receive an IPv4 address
automatically.
1. Turn on the machine.
2. Press the [Menu] key.
CER408
3. Press the [ ] or [ ] key to select [Host Interface], and then press the [OK] key.
4. Press the [ ] or [ ] key to select [Network Setting], and then press the [OK] key.
5. Press the [ ] or [ ] key to select [IPv4 Config.], and then press the [OK] key.
6. Press the [ ] or [ ] key to select [DHCP], and then press the [OK] key.
Configuring Network Settings
29
![](/img.php?id=2134301&img=bg20.png)
7. Press the [ ] or [ ] key to select [Active], and then press the [OK] key.
8. Press the [Menu] key to return to the initial screen.
9. If you are requested to restart the machine, turn off the machine, and then turn it back on.
10. Print the configuration page to check the setting.
The IPv4 address setting will appear under "TCP/IP" on the configuration page.
Assigning the machine's IPv4 address manually
• The IPv4 address assigned to the machine must not be used by any other device on the same
network.
1. Turn on the machine.
2. Press the [Menu] key.
CER408
3. Press the [ ] or [ ] key to select [Host Interface], and then press the [OK] key.
4. Press the [ ] or [ ] key to select [Network Setting], and then press the [OK] key.
5. Press the [ ] or [ ] key to select [IPv4 Config.], and then press the [OK] key.
6. Press the [ ] or [ ] key to select [DHCP], and then press the [OK] key.
7. Press the [ ] or [ ] key to select [Inactive], and then press the [OK] key.
8. Press the [ ] or [ ] key to select [IP Address], and then press the [OK] key.
The current IPv4 address is shown.
9. Enter the machine's IPv4 address using the [ ] or [ ] key.
• To go to the next field, press the [OK] key.
• To go back to the previous field, press the [Escape] key.
10. Press the [OK] key.
11. Press the [ ] or [ ] key to select [Subnet Mask], and then press the [OK] key.
The current subnet mask is shown.
1. Getting Started
30
![](/img.php?id=2134301&img=bg21.png)
12. Enter the subnet mask using the [ ] or [ ] key.
• To go to the next field, press the [OK] key.
• To go back to the previous field, press the [Escape] key.
13. Press the [OK] key.
14. Press the [ ] or [ ] key to select [Gateway Address], and then press the [OK] key.
The current gateway address is shown.
15. Enter the gateway address using the [ ] or [ ] key.
• To go to the next field, press the [OK] key.
• To go back to the previous field, press the [Escape] key.
16. Press the [OK] key.
17. Press the [Menu] key to return to the initial screen.
18. If you are requested to restart the machine, turn off the machine, and then turn it back on.
19. Print the configuration page to check the setting.
The IPv4 address setting will appear under "TCP/IP" on the configuration page.
• If [DHCP] is enabled, manually configured IPv4 address settings are not used.
Specifying settings to receive an IPv6 address automatically
• DHCP server is required on the network for the machine to receive an IPv6 address automatically.
1. Turn on the machine.
2. Press the [Menu] key.
CER408
3. Press the [ ] or [ ] key to select [Host Interface], and then press the [OK] key.
4. Press the [ ] or [ ] key to select [Network Setting], and then press the [OK] key.
5. Press the [ ] or [ ] key to select [IPv6 Config.], and then press the [OK] key.
Configuring Network Settings
31
![](/img.php?id=2134301&img=bg22.png)
6. Press the [ ] or [ ] key to select [IPv6], and then press the [OK] key.
7. Press the [ ] or [ ] key to select [Active], and then press the [OK] key.
8. Press the [ ] or [ ] key to select [DHCP], and then press the [OK] key.
9. Press the [ ] or [ ] key to select [Active], and then press the [OK] key.
10. Press the [Menu] key to return to the initial screen.
11. If you are requested to restart the machine, turn off the machine, and then turn it back on.
12. Print the configuration page to check the setting.
The IPv6 address setting will appear under "IPv6 Configuration" on the configuration page.
Assigning the machine's IPv6 address manually
• The IPv6 address assigned to the machine must not be used by any other device on the same
network.
1. Turn on the machine.
2. Press the [Menu] key.
CER408
3. Press the [ ] or [ ] key to select [Host Interface], and then press the [OK] key.
4. Press the [ ] or [ ] key to select [Network Setting], and then press the [OK] key.
5. Press the [ ] or [ ] key to select [IPv6 Config.], and then press the [OK] key.
6. Press the [ ] or [ ] key to select [IPv6], and then press the [OK] key.
7. Press the [ ] or [ ] key to select [Active], and then press the [OK] key.
8. Press the [ ] or [ ] key to select [DHCP], and then press the [OK] key.
9. Press the [ ] or [ ] key to select [Inactive], and then press the [OK] key.
10. Press the [ ] or [ ] key to select [Manual Address], and then press the [OK] key.
11. Press the [ ] or [ ] key to select [Manual Address], and then press the [OK] key.
1. Getting Started
32
![](/img.php?id=2134301&img=bg23.png)
12. Enter the machine's IPv6 address using the [ ] or [ ] key.
• To go to the next field, press the [OK] key.
• To go back to the previous field, press the [Escape] key.
13. Press the [OK] key.
14. Press the [ ] or [ ] key to select [Prefix Length], and then press the [OK] key.
15. Enter the prefix length using the [ ] or [ ] key, and then press the [OK] key.
16. Press the [ ] or [ ] key to select [Gateway Address], and then press the [OK] key.
17. Enter the gateway address using the [ ] or [ ] key.
• To go to the next field, press the [OK] key.
• To go back to the previous field, press the [Escape] key.
18. Press the [OK] key.
19. Press the [Menu] key to return to the initial screen.
20. If you are requested to reboot the machine, turn off the machine, and then turn it back on.
21. Print the configuration page to check the setting.
The IPv6 address setting will appear under "IPv6 Configuration" on the configuration page.
Sharing the Printer on a Network
This section explains how to configure this machine as a Windows network printer.
The network printer setting can be configured to enable network clients to use the machine.
• To change printer properties, you need access privileges for printer management. Log on using the
account for the Administrator group members.
• The following procedure is based on Windows 7. If you are using another operating system, the
procedure might differ slightly.
1. On the [Start] menu, click [Devices and Printers].
If you are using a computer that is running Windows 8 or Windows Server 2012, click [Search] on
the Charm Bar, and then click [Control Panel]. When the [Control Panel] window appears, click
[View devices and printers].
2. Right-click the icon of the printer you want to use, and then click [Printer properties].
The printer properties dialog box appears.
3. On the [Sharing] tab, click [Share this printer].
• To share this printer with users using a different version of Windows, continue with this
procedure.
• If you have installed an alternative driver by selecting [Share this printer] during the printer
driver installation, proceed to Step 8.
Configuring Network Settings
33
![](/img.php?id=2134301&img=bg24.png)
4. Click [Additional Drivers...].
5. Select the version of Windows with which you want to share the printer, and then click
[OK].
6. Click [Browse...], select the driver file, and then click [Open].
7. Click [OK].
8. On the [Advanced] tab, click the [Printing Defaults...] button.
Specify the default values for the printer driver to be used by client computers, and then click [OK].
9. Click [Apply].
10. Click [OK].
Wireless LAN Setup
This section explains how to configure the wireless LAN settings manually using the control panel. For
easy setup using WPS (Wi-Fi Protected Setup), see Wi-Fi Settings Guide.
• If [Inactive] is specified for the [Wi-Fi] setting, you cannot use the [Setup Wizard]. Specify [Active]
for the [Wi-Fi] setting first. If you change the [Wi-Fi] setting, the machine must be restarted.
• Ensure that the router, access point, or device equipped with a wireless LAN, etc., is turned on.
• Check the authentication method and the name of the router, access point, or device equipped
with a wireless LAN (SSID/IBSS) in advance.
• First, configure the wireless LAN setting, and then install the driver. For details about installing the
driver, see the Driver Installation Guide.
Infrastructure mode
Use the following procedure to connect to the wireless LAN router or access point manually.
1. Turn on the machine.
2. Press the [Menu] key.
3. Press the [ ] or [ ] key to select [Host Interface], and then press the [OK] key.
4. Press the [ ] or [ ] key to select [Network Setting], and then press the [OK] key.
5. Press the [ ] or [ ] key to select [Wi-Fi Config.], and then press the [OK] key.
6. Press the [ ] or [ ] key to select [Setup Wizard], and then press the [OK] key.
7. Press the [ ] or [ ] key to select [Infrastructure], and then press the [OK] key.
8. Press the [ ] or [ ] key to select the destination SSID, and then press the [OK] key.
If you cannot find the destination SSID, check if the device is turned on.
1. Getting Started
34
![](/img.php?id=2134301&img=bg25.png)
When entering the SSID, select [Input SSID], and then press the [OK] key.
The SSID entry screen appears. Enter the SSID using the [ ] or [ ] key, and then press the [OK]
key.
• To move to the next character, press the [OK] key.
• To return to the previous character, press the [Escape] key.
9. Press the [ ] or [ ] key to select the authentication method, and then press the [OK] key.
Select the same method that the router or access point is using.
If you have selected [WPA2-PSK] or [Mixed Mode], proceed to Step 11.
10. Press the [ ] or [ ] key to select the encryption method, and then press the [OK] key.
Select the same method that the router or access point is using.
11. Enter the encryption key, and then press the [OK] key.
• To move to the next character, press the [OK] key.
• To return to the previous character, press the [Escape] key.
If you selected [Shared Key] or [Open System] in Step 9, it is necessary to enter the ID. Enter the ID
using the [ ] or [ ] key, and then press the [OK] key.
The ID is used for identifying the encryption key. You can register four encryption keys (ID 1 to 4).
12. Press the [OK] key.
After connecting to the network, the Wi-Fi screen is displayed.
13. Press the [ ] or [ ] key to select [Wi-Fi Status], and then press the [OK] key.
When "Connected" is displayed, the connection has been established.
When "Disconnected" is displayed, the connection has not been established. Start again from the
beginning.
Ad Hoc mode
This section explains how to connect directly to devices equipped with a wireless LAN, such computers
on a peer-to-peer network.
• In Ad Hoc network, every device must be manually assigned an IP address for TCP/IP if there is no
DHCP server.
• In Ad Hoc mode, only Open System or WEP encryption is supported. WPA2-PSK and Mix Mode
WPA2/WPA authentication methods are not supported.
1. Turn on the machine.
2. Press the [Menu] key.
3. Press the [ ] or [ ] key to select [Host Interface], and then press the [OK] key.
Configuring Network Settings
35
![](/img.php?id=2134301&img=bg26.png)
4. Press the [ ] or [ ] key to select [Network Setting], and then press the [OK] key.
5. Press the [ ] or [ ] key to select [Wi-Fi Config.], and then press the [OK] key.
6. Press the [ ] or [ ] key to select [Setup Wizard], and then press the [OK] key.
7. Press the [ ] or [ ] key to select [Ad-Hoc], and then press the [OK] key.
8. Press the [ ] or [ ] key to select a communication channel, and then press the [OK] key.
Select a channel that corresponds to the device that you are going to connect with.
9. Press the [ ] or [ ] key to select the destination device name (IBSS), and then press the
[OK] key.
If you cannot find the destination, check that the device is turned on.
When entering the device name, select [Input SSID], and then press the [OK] key. The SSID entry
screen appears. Enter the device name using the [ ] or [ ] key, and then press the [OK] key.
• To move to the next character, press the [OK] key.
• To return to the previous character, press the [Escape] key.
10. Press the [ ] or [ ] key to select the authentication method, and then press the [OK] key.
11. Press the [ ] or [ ] key to select the encryption method, and then press the [OK] key.
12. Enter the encryption key using the [ ] or [ ] key, and then press the [OK] key.
• To move to the next character, press the [OK] key.
• To return to the previous character, press the [Escape] key.
13. Enter the ID using the [ ] or [ ] key, and then press the [OK] key.
The ID is used for identifying the encryption key. You can register four encryption keys (ID 1 to 4).
14. Press the [OK] key.
After connecting to the network, the Wi-Fi screen is displayed.
15. Press the [ ] or [ ] key to select [Wi-Fi Status], and then press the [OK] key.
When "Connected" is displayed, the connection has been established.
When "Disconnected" is displayed, the connection has not been established. Start again from the
beginning.
1. Getting Started
36
![](/img.php?id=2134301&img=bg27.png)
Restricting Machine Functions According to
User
You can configure settings to require a user code when someone tries to use certain machine functions.
To enable this setting, you must first configure the machine settings via Web Image Monitor.
• This function is available for the Type 2 model only.
• To print jobs that require authentication you can use only the PCL printer driver. Printing such jobs
from the PostScript 3 printer driver is not possible.
• For details about using Web Image Monitor, see page 101 "Using Web Image Monitor".
Enabling the User Restriction Settings
This section explains how to configure settings to permit only authorized users to use certain machine
functions.
Using Web Image Monitor, enable user restriction for all or some of the functions listed below, and then
register users who can use those functions.
• PictBridge printing
• Printing (both color and black-and-white)
• Color printing
You can specify functions available to each user upon authentication. Up to 30 users can be registered.
1. Start the Web browser, and access the machine by entering its IP address.
2. Click [Restrict Available Functions].
3. Enter the administrator password if required.
4. Click [Apply].
Restricting Machine Functions According to User
37
![](/img.php?id=2134301&img=bg28.png)
5. Under "Available Functions", select [Restrict] for the functions you want to restrict, and
then click [Apply].
Select [Do not Restrict] for the functions you do not want to restrict.
The user restriction setting is enabled for the selected function. Proceed to the following steps to
register users.
6. Click [Available Functions per User].
A list of currently registered user entries appears.
7. Select a user entry, and then click [Change].
The following window appears.
8. Enter the user name in [User Name] using up to 16 alphanumeric characters.
9. Enter the user code in [User Code] using up to 8 digits.
The user code will be used to authenticate users when they try to use a restricted function.
10. Select the functions you want to make available to the user upon authentication.
Unselected functions will be unavailable to users authenticated under this user code.
11. Click [Apply].
1. Getting Started
38
![](/img.php?id=2134301&img=bg29.png)
12. Close the Web browser.
• You must enter both the user name and user code to register a user entry.
• Make sure that different user entries do not share the same user name or user code.
Modifying user entries
This section explains how to modify user entries.
1. Start the Web browser, and access the machine by entering its IP address.
2. Click [Restrict Available Functions].
3. Enter the administrator password if required.
4. Click [Apply].
5. Click [Available Functions per User].
A list of currently registered user entries appears.
6. Select the entry to modify, and then click [Change].
7. Modify settings as necessary.
8. Click [Apply].
9. Close the Web browser.
Deleting user entries
This section explains how to delete user entries.
1. Start the Web browser, and access the machine by entering its IP address.
2. Click [Restrict Available Functions].
3. Enter the administrator password if required.
4. Click [Apply].
5. Click [Available Functions per User].
A list of currently registered user entries appears.
6. Select the entry to delete, and then click [Delete].
7. Confirm that the entry you have selected is the entry that you want to delete.
8. Click [Apply].
9. Close the Web browser.
Restricting Machine Functions According to User
39
![](/img.php?id=2134301&img=bg2a.png)
When Machine Functions are Restricted
Restricted functions can be used only by authorized users.
Depending on the restricted function, users will be authenticated from the machine's control panel or in
the printer driver.
• This function is available for the Type 2 model only.
• To print jobs that require authentication you can use only the PCL printer driver. Printing such jobs
from the PostScript 3 printer driver is not possible.
• The procedure in this section is an example based on Windows 7.
The table below shows the functions that can be restricted, and how users can be authenticated to use
them.
Restricted Function Authentication method
• PictBridge printing The machine requests for a user code when a digital camera is
connected to the machine.
The user must enter a valid user code from the control panel.
• Printing (both color and
black-and-white)
• Color printing
The user must enter a valid user code in the printer driver before
executing a print command.
Authentication using the control panel
1. If the printer requests for a user code, enter a user code using the [ ] or [ ] key.
If you enter a wrong user code, the printer denies further attempts of authentication.
2. Press the [OK] key.
Authentication using the printer driver
1. Open the file you want to print on your computer.
2. On the [File] menu, click [Print...].
3. In the [Select Printer] area, select the name of this machine, and then click [Preferences].
4. Click the [Valid Access] tab.
5. Enter the user code using 1 to 8 digits, and then click [OK].
6. Execute a print command.
If an incorrect user code is entered, the job will be canceled automatically (without any error
message).
1. Getting Started
40
![](/img.php?id=2134301&img=bg2b.png)
2. Loading Paper
Supported Paper
Tray 1
Type Size Weight Capacity
Thin paper
Plain paper
Middle thick paper
Thick paper 1, 2
Recycled paper
Color paper
Preprinted paper
Prepunched paper
Letterhead
Bond paper
Cardstock
Label paper
Envelope
A4
B5 JIS
A5
B6 JIS
A6
Legal (81/2 × 14 inches)
Letter (81/2 × 11 inches)
Half Letter (51/2 × 81/2 inches)
Executive (71/4 × 101/2
inches)
8 × 13 inches
81/2 × 13 inches
Folio (81/4 × 13 inches)
16K (195 × 267 mm)
Com 10 (41/8 × 91/2 inches)
Monarch (37/8 × 71/2 inches)
C5 Env (162 × 229 mm)
C6 Env (114 × 162 mm)
DL Env (110 × 220 mm)
Custom size:
90 to 216 mm in width,
148 to 356 mm in length
(3.54 to 8.50 inches in width,
5.83 to 14.0 inches in length)
60 to 160 g/m2
(16 to 43 lb.)
250
(80 g/m2, 20 lb.)
41
![](/img.php?id=2134301&img=bg2c.png)
Tray 2 (option)
Type Size Weight Capacity
Thin paper
Plain paper
Middle thick paper
Thick paper 1
Recycled paper
Color paper
Preprinted paper
Prepunched paper
Letterhead
A4
Letter (81/2 × 11 inches)
60 to 105 g/m2
(16 to 28 lb.)
500
(80 g/m2, 20 lb.)
2. Loading Paper
42
![](/img.php?id=2134301&img=bg2d.png)
Bypass tray
Type Size Weight Capacity
Thin paper
Plain paper
Middle thick paper
Thick paper 1, 2
Recycled paper
Color paper
Prepunched paper
Letterhead
Bond paper
Cardstock
Label paper
Envelope
A4
B5 JIS
A5
B6 JIS
A6
Legal (81/2 × 14 inches)
Letter (81/2 × 11 inches)
Half Letter (51/2 × 81/2 inches)
Executive (71/4 × 101/2
inches)
8 × 13
81/2 × 13
Folio (81/4 × 13 inches )
16K (195 mm × 267 mm)
Com 10 (41/8 × 91/2 inches)
Monarch (37/8 × 71/2 inches)
C5 Env (162 × 229 mm)
C6 Env (114 × 162 mm)
DL Env (110 × 220 mm)
Custom size:
90 to 216 mm in width,
148 to 356 mm in length
(3.54 to 8.50 inches in width,
5.83 to 14.0 inches in length)
60 to 160 g/m2
(16 to 43 lb.)
1
• You cannot print on Legal size paper in the following cases:
• PCL printer driver
When [Gradation:] in [Print Quality] is set to [Fine]
• PostScript 3 printer driver
When [Print Quality] in [Printer Features] is set to [Best Quality]
Supported Paper
43
![](/img.php?id=2134301&img=bg2e.png)
Specifications of Paper Types
The following tables describe the types of paper that can be used with this machine.
• Depending on the paper type, the toner may take a while to dry. Before handling printed sheets,
make sure that they have fully dried. Otherwise, the toner may smudge.
• Print quality can be guaranteed only if recommended paper is used. For more information about
the recommended paper, contact your sales or service representative.
Middle thick paper
Item Description
Paper thickness 75 to 90 g/m2 (20 to 24 lb.)
Supported paper tray Can be used with any of the paper trays.
Duplex supported size A4, B5 JIS, Legal (81/2 × 14 inches), Letter (81/2 × 11 inches), Executive
(71/4 × 101/2 inches ), 8 × 13, 81/2 × 13, Folio (81/4 × 13 inches), 16K
(195 mm × 267 mm)
Thick paper 1
Item Description
Paper thickness 91 to 105 g/m2 (24 to 28 lb.)
Supported paper tray Can be used with any of the paper trays.
Duplex supported size None
Notes The number of sheets that can be printed per minute is approximately half
that of middle thick paper.
Thick paper 2
Item Description
Paper thickness 106 to 160 g/m2 (28 to 43 lb.)
Supported paper tray Tray 1 and bypass tray
Duplex supported size None
Notes The number of sheets that can be printed per minute is approximately half
that of middle thick paper.
2. Loading Paper
44
![](/img.php?id=2134301&img=bg2f.png)
Thin paper
Item Description
Paper thickness 60 to 65g/m2 (16 to 17 lb.)
Supported paper tray Can be used with any of the paper trays.
Duplex supported size A4, B5 JIS, Legal (81/2 × 14 inches), Letter (81/2 × 11 inches), Executive
(71/4 × 101/2 inches), 8 × 13, 81/2 × 13, Folio (81/4 × 13 inches), 16K
(195 mm × 267 mm)
Plain paper
Item Description
Paper thickness 66 to 74 g/m2 (18 to 20 lb.)
Supported paper tray Can be used with any of the paper trays.
Duplex supported size A4, B5 JIS, Legal (81/2 × 14 inches), Letter (81/2 × 11 inches), Executive
(71/4 × 101/2 inches), 8 × 13, 81/2 × 13, Folio (81/4 × 13 inches), 16K
(195 mm × 267 mm)
Recycled paper
Item Description
Paper thickness 75 to 90 g/m2 (20 to 24 lb.)
Supported paper tray Can be used with any of the paper trays.
Duplex supported size A4, B5 JIS, Legal (81/2 × 14 inches), Letter (81/2 × 11 inches), Executive
(71/4 × 101/2 inches), 8 × 13, 81/2 × 13, Folio (81/4 × 13 inches), 16K
(195 mm × 267 mm)
Notes If the paper thickness is outside the specified range, select [Thin Paper],
[Plain Paper], [Thick Paper 1], or [Thick Paper 2].
Color paper
Item Description
Paper thickness 75 to 90 g/m2 (20 to 24 lb.)
Supported paper tray Can be used with any of the paper trays.
Supported Paper
45
![](/img.php?id=2134301&img=bg30.png)
Item Description
Duplex supported size A4, B5 JIS, Legal (81/2 × 14 inches), Letter (81/2 × 11 inches), Executive
(71/4 × 101/2 inches), 8 × 13, 81/2 × 13, Folio (81/4 × 13 inches), 16K
(195 mm × 267 mm)
Notes If the paper thickness is outside the specified range, select [Thin Paper],
[Plain Paper], [Thick Paper 1], or [Thick Paper 2].
Preprinted paper
Item Description
Paper thickness 75 to 90 g/m2 (20 to 24 lb.)
Supported paper tray Tray 1 and tray 2
Duplex supported size A4, B5 JIS, Legal (81/2 × 14 inches), Letter (81/2 × 11 inches), Executive
(71/4 × 101/2 inches), 8 × 13, 81/2 × 13 inches, Folio (81/4 × 13
inches), 16K (195 mm × 267 mm)
Notes If the paper thickness is outside the specified range, select [Thin Paper],
[Plain Paper], [Thick Paper 1], or [Thick Paper 2].
Prepunched paper
Item Description
Paper thickness 75 to 90 g/m2 (20 to 24 lb.)
Supported paper tray Can be used with any of the paper trays.
Duplex supported size A4, B5 JIS, Legal (81/2 × 14 inches), Letter (81/2 × 11 inches), Executive
(71/4 × 101/2 inches), 8 × 13, 81/2 × 13, Folio (81/4 × 13 inches), 16K
(195 mm × 267 mm)
Notes If the paper thickness is outside the specified range, select [Thin Paper],
[Plain Paper], [Thick Paper 1], or [Thick Paper 2].
Letterhead
Item Description
Paper thickness 75 to 90 g/m2 (20 to 24 lb.)
Supported paper tray Can be used with any of the paper trays.
2. Loading Paper
46
![](/img.php?id=2134301&img=bg31.png)
Item Description
Duplex supported size A4, B5 JIS, Legal (81/2 × 14 inches), Letter (81/2 × 11 inches), Executive
(71/4 × 101/2 inches), 8 × 13, 81/2 × 13, Folio (81/4 × 13 inches), 16K
(195 mm × 267 mm)
Notes Paper that has a thickness outside the specified range cannot be printed
onto.
Bond paper
Item Description
Paper thickness 106 to 160 g/m2 (28 to 43 lb.)
Supported paper tray Tray 1 and bypass tray
Duplex supported size None
Notes • The number of sheets that can be printed in one minute is
approximately half that of middle thick paper.
• If the paper thickness is outside the specified range, select [Thick Paper
1].
Cardstock
Item Description
Paper thickness 106 to 160 g/m2 (28 to 43 lb.)
Supported paper tray Tray 1 and bypass tray
Duplex supported size None
Notes • The number of sheets that can be printed in one minute is
approximately half that of middle thick paper.
• Paper thicker than 160 g/m2 cannot be printed onto.
Label paper
Item Description
Supported paper tray Tray 1 and bypass tray
Duplex supported size None
Supported Paper
47
![](/img.php?id=2134301&img=bg32.png)
Item Description
Notes • The number of sheets that can be printed per minute is approximately
half that of middle thick paper.
• Avoid using adhesive label paper on which glue is exposed. Glue
may stick to the inner parts of the machine, which can cause paper
feed problems, deterioration in print quality, or premature wear of the
print cartridge's photo conductor unit.
Envelope
Item Description
Supported paper tray Tray 1 and bypass tray
Duplex supported size None
Notes
• Avoid using self-adhesive envelopes. They may cause machine malfunctions.
• The number of envelopes that can be printed per minute is approximately half that of middle thick
paper.
• Paper can be loaded only up to the lower of the two paper limit marks of the tray.
• If printed envelopes come out badly creased, load the envelopes in the opposite direction. Also,
configure the printer driver to rotate the print object 180 degrees. For details about changing the
orientation see the printer driver Help.
• Environmental factors can degrade the print quality on both recommended and non-recommended
envelopes.
• If envelopes are severely curled after printing, flatten them by bending them back against the curl.
• After printing, envelopes sometimes have creases along their long edges and toner smear on their
unprinted sides. Print images might also be blurred. When printing large, black-solid areas, striping
can occur as a result of the envelopes overlapping.
• To correctly specify the length of an envelope whose flap opens along its short edge, be sure to
include the open flap when measuring.
CER112
2. Loading Paper
48
![](/img.php?id=2134301&img=bg33.png)
• Fan envelopes, and then align their edges before loading.
DAC573
• When fanning envelopes, make sure they are not stuck together. If they are stuck together,
separate them.
• When fanning envelopes, make sure the envelope flaps are not stuck. If they are stuck, separate
them.
• Before loading envelopes, flatten them out so that their curl does not exceed that shown as shown
below.
DAC574
• If the curl is severe, flatten out the envelopes using your fingers, as shown below.
DAC575
Supported Paper
49
![](/img.php?id=2134301&img=bg34.png)
• You may not be able to perform duplex printing on 8 × 13, 81/2 × 13, Folio (81/4 × 13 inches),
or 16K (195 mm × 267 mm) size paper in the following cases:
• PCL printer driver
When [Gradation:] in [Print Quality] is set to [Fine]
• PostScript 3 printer driver
When [Print Quality] in [Printer Features] is set to [Best Quality]
2. Loading Paper
50
![](/img.php?id=2134301&img=bg35.png)
Non-Recommended Paper Types
Do not use the following types of paper:
• Ink-jet printer paper
• Bent, folded, or creased paper
• Curled or twisted paper
• Torn paper
• Wrinkled paper
• Damp paper
• Dirty or damaged paper
• Paper that is dry enough to emit static electricity
• Paper that has already been printed onto, except a preprinted letterhead paper.
Malfunctions are especially likely when using paper printed on by other than a laser printer
(e.g.monochrome and color copiers, ink-jet printers, etc.)
• Special paper, such as thermal paper and carbon paper
• Paper weighing heavier or lighter than the limit
• Paper with windows, holes, perforations, cutouts, or embossing
• Adhesive label paper on which glue or base paper is exposed
• Paper with clips or staples
• When loading paper, take care not to touch the surface of the paper.
• Even if paper is adequate for the machine, poorly stored paper can cause paper misfeeds, print
quality degradation, or malfunctions.
Non-Recommended Paper Types
51
![](/img.php?id=2134301&img=bg36.png)
Print Area
The diagram below shows the area of the paper that the machine can print on.
Paper
DAC571
1
2
4
3
3
4
1. Print area
2. Feed direction
3. Approx. 4.2 mm (0.2 inches)
4. Approx. 4.2 mm (0.2 inches)
Envelope
4
12
3
3
3
DAC577
1. Print area
2. Feed direction
3. Approximately 10 mm (0.4 inches)
4. Approximately 15 mm (0.6 inches)
2. Loading Paper
52
![](/img.php?id=2134301&img=bg37.png)
• Borderless printing is not supported.
• The print area may vary depending on the paper size, printer language and printer driver
settings.
• For better envelope printing, we recommend you set the right, left, top, and bottom print
margins to at least 15 mm (0.6 inches) each.
Print Area
53
![](/img.php?id=2134301&img=bg38.png)
Loading Paper
Loading Paper into Tray1 and 2
The following example explains the loading procedure for the standard paper tray (Tray 1).
The same procedure applies to loading paper in Tray 2.
• Before printing on paper other than envelopes, make sure to pull up the levers on the machine rear,
inside the rear cover.
• Curled paper may jam. Straighten curled paper before loading.
• After loading paper in the tray, specify the paper type and size using the control panel to avoid
printing problems. This machine does not detect the paper size automatically.
1. Pull out the paper tray carefully with both hands.
DAC070
Place the tray on a flat surface.
2. Push the metal plate down until it clicks.
DAC050
2. Loading Paper
54
![](/img.php?id=2134301&img=bg39.png)
3. Pinch the clip on the side paper guide and slide it to match the paper size.
DAC051
When loading custom size paper, position the paper guide slightly wider than the actual paper
size.
4. Pinch the end paper guide and slide it inward to match the paper size.
DAC053
When loading custom size paper, position the paper guide slightly wider than the actual paper
size.
5. Load new sheets of paper aligned with their side to be printed face down.
Make sure the paper is not stacked higher than the upper limit marked inside the tray.
The upper limit mark in Tray 2 differs from the illustrated mark.
DAC052
Loading Paper
55
![](/img.php?id=2134301&img=bg3a.png)
Slide the guides inward until they are flush against the paper's sides.
Make sure the paper is not stacked higher than the projection on the side paper guides.
When using Tray 2, make sure the paper is not stacked higher than the upper limit marked inside
the tray.
DAC059
6. Check there are no gaps between the paper and the paper guides (both side and end
paper guides).
DAC058
7. Carefully push the paper tray straight into the machine.
To avoid paper jams, make sure the tray is securely inserted.
• The upper limit differs depending on the paper type (thin or thick paper). See the label inside the
tray to check the upper limit.
• The remaining paper indicator on the right front side of the paper tray shows approximately how
much paper is remaining.
Extending Tray 1 to load paper
This section explains how to load paper longer than A4 (297 mm) into the machine.
2. Loading Paper
56
![](/img.php?id=2134301&img=bg3b.png)
1. Remove the rear cover using a coin.
DAC032
2. Pull out Tray 1 carefully with both hands.
Place the tray on a flat surface.
3. Push the metal plate down until it clicks.
DAC050
4. Pinch the extender in the "PUSH" direction, and then pull out the extender until it clicks.
DAC055
After extension, check that the arrows on the extender and tray are aligned.
Loading Paper
57
![](/img.php?id=2134301&img=bg3c.png)
DAC056
5. Follow Steps 3 to 7 in "Loading Paper into Tray1 and 2".
• To reinsert the extender, you might have to push it with moderate force.
Loading Paper into Bypass Tray
• Before printing on paper other than envelopes, make sure to pull up the levers on the machine rear,
inside the rear cover.
• Load paper with the print side down and in the short-edge feed direction.
• Do not load paper while the machine is printing.
• Curled paper may jam. Straighten curled paper before loading.
• Duplex printing is not possible.
• Tray 1 and 2 are unavailable if paper is loaded in the bypass tray.
• You cannot load paper into the bypass tray while the machine is in Energy Saver mode.
1. Insert the top edge of the paper into the machine.
DAC067
2. Loading Paper
58
![](/img.php?id=2134301&img=bg3d.png)
2. Adjust the paper guides to the paper size.
DAC066
3. Support the paper with both hands, and insert it carefully until it stops.
DAC065
Loading Envelopes
• Before printing on envelopes, make sure to lower the levers on the machine rear, inside the rear
cover, to avoid envelopes coming out creased. Also, pull up the levers back to their original
positions after printing.
• Avoid using self-adhesive envelopes. They may cause machine malfunctions.
• Check there is no air in the envelopes before loading.
• Load only one size and type of envelope at a time.
• Before loading envelopes, flatten their leading edges (the edge going into the machine) by running
a pencil or ruler across them.
• Some kinds of envelope might cause misfeeds, wrinkles or print poorly.
• Print quality on envelopes may be uneven if parts of an envelope have different thicknesses. Print
one or two envelopes in advance to check the print quality.
• In a hot and humid environment, the envelope might be delivered creased or with low printing
quality.
Loading Paper
59
![](/img.php?id=2134301&img=bg3e.png)
Lowering the fusing unit levers
1. Pull the front cover open lever, and then carefully lower the front cover.
2
1
DAC061
2. Lower the fusing unit levers.
DAC340
3. Using both hands, carefully push up the front cover until it closes.
DAC062
For details about loading an envelope, see page 54 "Loading Paper into Tray1 and 2", and
page 58 "Loading Paper into Bypass Tray". Note that you cannot load an envelope in Tray 2.
• Be sure to load envelopes so that their flaps are on the right. If you do not, the envelopes will
become creased.
2. Loading Paper
60
![](/img.php?id=2134301&img=bg3f.png)
• If printed envelopes come out badly creased, load the envelopes in the opposite direction, and
then rotate the print object by 180 degrees using the printer driver before printing. For details, see
the printer driver Help.
• When Using Tray 1
• If the envelope flap is on a short side, place the envelope with the flap side in the tray recess.
If the envelope flap is on a long side, place the envelope with the flap side on the right.
DAC576
• When Using the Bypass Tray
• If the envelope flap is on a short side, place the envelope with the flap side in the front part of
the tray. If the envelope flap is on a long side, place the envelope with the flap side on the
right.
DAC473
Specifying Paper Type and Paper Size Using Control Panel
This section explains how to specify the paper size and paper type using the control panel.
• Paper type and size can also be specified using the printer driver. For details, see the printer driver
Help.
Loading Paper
61
![](/img.php?id=2134301&img=bg40.png)
• For prints from the bypass tray or Tray 1, you can select to print according to either the printer
driver settings or the control panel settings with [Bypass Priority] or [Tray1 Priority] under [Paper
Input]. For details about [Bypass Priority] or [Tray1 Priority], see page 83 "Paper Input Menu".
• If [Auto Continue] under system menu is enabled, printing stops temporarily if a paper type/size
error is detected. The printing restarts automatically with the settings made with the control panel
after about ten seconds. However, if the size of paper specified on the control panel and that of the
paper loaded in the paper tray or the paper size specified for the print job do not match when
printing restarts, it may cause a paper jam. For details about [Auto Continue], see page 89
"System Menu".
Specifying the paper type
This section explains how to specify the paper type.
1. Press the [Menu] key.
CER408
2. Press the [ ] or [ ] key to select [Paper Input], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Paper Type], and then press the [OK] key.
4. Press the [ ] or [ ] key to select the paper type setting for the desired tray, and then
press the [OK] key.
5. Press the [ ] or [ ] key to select the desired paper type, and then press the [OK] key.
6. Press the [Menu] key to return to the initial screen.
Specifying the standard paper size
This section explains how to specify the standard paper size.
2. Loading Paper
62
![](/img.php?id=2134301&img=bg41.png)
1. Press the [Menu] key.
CER408
2. Press the [ ] or [ ] key to select [Paper Input], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Paper Size], and then press the [OK] key.
4. Press the [ ] or [ ] key to select the paper size setting for the desired tray, and then press
the [OK] key.
5. Press the [ ] or [ ] key to select the desired paper size, and then press the [OK] key.
6. Press the [Menu] key to return to the initial screen.
Specifying a custom paper size
This section explains how to specify a custom paper size.
• Custom size paper cannot be loaded in tray 2.
• When you perform printing, make sure that the paper size specified with the printer driver matches
the paper size specified with the control panel. If a paper size mismatch occurs, a message
appears on the display. To ignore the error and print using mismatched paper, see page 67 "If a
Paper Mismatch Occurs".
1. Press the [Menu] key.
CER408
2. Press the [ ] or [ ] key to select [Paper Input], and then press the [OK] key.
Loading Paper
63
![](/img.php?id=2134301&img=bg42.png)
3. Press the [ ] or [ ] key to select [Paper Size], and then press the [OK] key.
4. Press the [ ] or [ ] key to select the paper size setting for the desired tray, and then press
the [OK] key.
5. Press the [ ] or [ ] key to select [Custom Size], and then press the [OK] key.
6. Press the [ ] or [ ] key to select [mm] or [inch], and then press the [OK] key.
7. Enter the width using the [ ] or [ ] key, and then press the [OK] key.
8. Enter the length using the [ ] or [ ] key, and then press the [OK] key.
9. Press the [Menu] key to return to the initial screen.
2. Loading Paper
64
![](/img.php?id=2134301&img=bg43.png)
3. Printing Documents
Basic Operation
This section explains the basic printing procedure.
1. Open the [Printing Preferences] dialog box in your document's application.
For details about each setting, click [Help]. You can also click the information icons to display
configuration information.
2. Configure printing option settings as necessary, and then click [OK].
The printer properties dialog box closes.
3. Click [OK].
• If a paper jam occurs, printing stops after the current page has been printed out. After the jammed
paper is removed, printing restarts from the jammed page automatically. For details about how to
remove the jammed paper, see page 151 "Removing Printing Jams".
• After printing on envelopes, make sure to pull up the levers for printing on envelopes back to their
original positions. For details about the levers for printing on envelopes, see page 59 "Loading
Envelopes".
Canceling a Print Job
You can cancel print jobs using either the machine's control panel or your computer, depending on the
status of the job.
65
![](/img.php?id=2134301&img=bg44.png)
Canceling a print job before printing has started
Windows
1. Double-click the printer icon on the task tray of your computer.
2. Select the print job you want to cancel, click the [Document] menu, and then click
[Cancel].
Mac OS X
1. From the Apple menu, select [System Preferences...].
2. Under "Hardware", click [Print & Fax] or [Print & Scan].
3. Double-click the machine from "Printers".
4. Select the print job you want to cancel, and then click [Delete].
• If you cancel a print job that has already been processed, printing may continue for a few pages
before being canceled.
• It may take a while to cancel a large print job.
Canceling a print job while printing
1. Press the [Job Reset] key.
DAC582
3. Printing Documents
66
![](/img.php?id=2134301&img=bg45.png)
If a Paper Mismatch Occurs
The machine reports an error if:
• The paper size or type does not match the print job's settings when [Input Tray:] is set to [Auto Tray
Select].
There are two ways to resolve these errors:
Continue printing using mismatched paper
Use the form-feed function to ignore the error and print using mismatched paper.
Reset the print job
Cancel printing.
Continuing Printing Using Mismatched Paper
If the paper is too small for the print job, the printed image will be cropped.
1. While an error message is displayed on the control panel, press the [Stop/Start] key.
DAC583
If a Paper Mismatch Occurs
67
![](/img.php?id=2134301&img=bg46.png)
Resetting the Print Job
1. While an error message is displayed on the control panel, press the [Job Reset] key.
DAC582
3. Printing Documents
68
![](/img.php?id=2134301&img=bg47.png)
Printing Confidential Documents
By the Locked Print function, you can password-protect print jobs.
This means that your job is printed only after you enter the password using the machine's control panel.
This function prevents unauthorized users from seeing sensitive documents at the machine.
• This function is available for the Type 2 model only.
• This function is only available when using the PCL printer driver, and printing from a computer
running a Windows operating system.
• The procedure in this section is an example based on Windows 7.
Storing a Locked Print file
This section explains how to store a Locked Print file in the machine using the printer driver.
1. Open the file you want to print on your computer.
2. On the [File] menu, click [Print...].
3. In the [Select Printer] area, select the name of this machine, and then click [Preferences].
4. Click the [Setup] tab, and then select [Locked Print].
The [Password:] and [User ID:] text boxes become available.
The [User ID:] text box contains the login user name of your computer account or the user code
used for the previous Locked Print job.
5. Type the password (containing 4 to 8 digits) and user ID (containing 1 to 9 alphanumeric
characters), and then click [OK].
The user code will be used to identify your Locked Print file on the machine's control panel.
6. Execute a print command.
The print job is stored in the machine as a Locked Print file. You can print the file by entering the
password using the control panel.
• The Locked Print file is automatically erased from the machine's memory when it is printed out, or
when the machine's power is turned off.
• The machine can store up to 5 jobs or 5 MB of Locked Print data at a time.
• Even if the printer cannot store any more Locked Print files, the printer holds a new Locked Print file
for the period of time specified in [Timeout:LockPrt] under [Host Interface] before canceling the job.
Within this time, you can print or delete the new Locked Print file. You can also print or delete an
existing Locked Print file so that the new Locked Print file can be stored in the machine.
Printing Confidential Documents
69
![](/img.php?id=2134301&img=bg48.png)
• When a Locked Print job is canceled, the machine automatically logs the cancellation. You can use
this log to identify which Locked Print jobs have been canceled.
Printing a Locked Print File
When there is a Locked Print file stored in the printer, "Locked Print Job Press OK" appears on the
printer's control panel display.
Use the following procedure to unlock and print the Locked Print file.
1. When the Locked Print message is displayed, press the [OK] key.
2. Press the [ ] or [ ] key to select the file you want to print, and then press the [OK] key.
"HH:MM" is the time when the Locked Print file was stored, and "User ID" is the user ID entered
using the printer driver.
3. Press the [ ] or [ ] key to select [Print Job], and then press the [OK] key.
4. Enter the password using the [ ] or [ ] keys.
• Press the [OK] key to confirm the entry of each digit.
• Press the [Escape] key to discard the current digits and exit to the previous level of the menu
tree.
5. Press the [OK] key.
The Locked Print file is printed.
Deleting a Locked Print File
When there is a Locked Print file stored in the printer, "Locked Print Job Press OK" appears on the
printer's control panel display.
3. Printing Documents
70
![](/img.php?id=2134301&img=bg49.png)
Use the following procedure to delete a Locked Print file. You do not need to enter a password to delete
a Locked Print file.
1. When the Locked Print message is displayed, press the [OK] key.
2. Press the [ ] or [ ] key to select the file you want to delete, and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Delete Job], and then press the [OK] key.
4. Press the [ ] or [ ] key to select [Execute], and then press the [OK] key.
The Locked Print file is deleted.
If there are Locked Print files/logs remaining in the printer, the display returns to the list of Locked
Print files/logs. If there are none remaining, the display returns to the initial screen.
Checking which Locked Print File Jobs Have Been Canceled
When a Locked Print job is canceled, the printer automatically logs the cancellation. If the printer has
created a cancellation log, "Locked Print Job Deleted" will appear on the control panel display.
Use the following procedure to check which Locked Print file jobs have been canceled.
1. When the Locked Print message is displayed, press the [OK] key.
2. Press the [ ] or [ ] key to find a file whose name starts with an "!" mark.
The "!" mark indicates that the job has been canceled.
"HH:MM" is the time when the Locked Print file was stored, and "User ID" is the user ID entered
using the printer driver.
To delete the log entry, proceed to the following steps.
3. Press the [OK] key.
4. Confirm that the log entry you want to delete is selected, and then press the [OK] key.
Printing Confidential Documents
71
![](/img.php?id=2134301&img=bg4a.png)
5. Press the [ ] or [ ] key to select [Execute], and then press the [OK] key.
The log is deleted.
If there are Locked Print logs/files remaining in the printer, the display returns to the list of Locked
Print logs/files. If there are none remaining, the display returns to the initial screen.
3. Printing Documents
72
![](/img.php?id=2134301&img=bg4b.png)
Direct Printing from a Digital Camera
(PictBridge)
What Is PictBridge?
You can connect a PictBridge-compatible digital camera to this machine using a USB cable. This allows
you to directly print photographs by operating the digital camera.
• Check that your digital camera is PictBridge-compatible.
• Up to 999 images can be sent from the digital camera to the machine during one print transaction.
If an attempt is made to send more images, an error message is sent to the camera and printing
fails.
• Since printing conditions are specified on the digital camera, specifiable parameters depend on
the digital camera. For details, see the manuals provided with the digital camera.
• This function is compatible with USB 2.0.
PictBridge Printing
Use the following procedure to start PictBridge printing on this machine.
• Memory overflow errors can occur during printing a high-resolution image. If this happens, reduce
the size of the data, and then try the operation again.
• Do not disconnect the USB cable while data is being sent. If you do, printing will fail.
1. Make sure that both the machine and the digital camera are turned on.
2. Connect the USB cable to the USB host interface board on the machine and to your digital
camera.
DAC033
Direct Printing from a Digital Camera (PictBridge)
73
![](/img.php?id=2134301&img=bg4c.png)
When the printer recognizes the digital camera as a PictBridge device, "PictBridge Connecting...",
then "Ready" will appear on the machine's control panel.
3. On your digital camera, select the images you want to print, and then specify the printing
conditions.
4. The machine receives the specified data from the digital camera and starts printing.
• Some digital cameras require specifying settings manually for PictBridge operation. For details, see
the manual provided with the digital camera.
• Some digital cameras require manually operating a switch for PictBridge operation. For details, see
the manual provided with the digital camera.
• Some digital cameras need to be switched off when connecting to the printer. For details, see the
manual provided with the digital camera.
What Can Be Done on this Machine
This machine can perform the following functions using its PictBridge feature.
The settings available for these functions are as follows:
• Single image printing
• Selected image printing
• All image printing
• Index printing
• Copies
• Paper size
• N-up layout
• The setting parameters and their names may vary depending on the digital camera. For details, see
the manuals provided with the digital camera.
Exiting PictBridge
Use the following procedure to quit the PictBridge mode.
• Do not disconnect the USB cable while data is being sent to the machine. If you do, printing will
fail.
1. Check that "Ready" appears on the screen.
3. Printing Documents
74
![](/img.php?id=2134301&img=bg4d.png)
2. Disconnect the USB cable from the machine.
When PictBridge Printing Does Not Work
This section explains likely causes and possible solutions for problems that can occur during PictBridge
printing.
Problem Cause Solution
PictBridge is not available. There is a problem with the USB
connection or the PictBridge
settings.
Use the following procedure to
check the connection and
settings:
1. Disconnect and then
reconnect the USB cable.
2. Check the PictBridge
settings are enabled.
3. Disconnect the USB cable,
and then turn off the
machine. Turn the machine
back on. When the
machine has fully booted
up, reconnect the USB
cable.
When two or more digital
cameras are connected, the
second and subsequent
cameras are not recognized.
You have connected multiple
digital cameras.
Connect one digital camera
only.
Do not connect multiple
cameras.
Cannot print. The specified number of prints
exceeds the maximum number
that can be printed at a time.
The maximum specifiable print
quantity at a time is 999.
Change the quantity to 999 or
less, and then retry printing.
Direct Printing from a Digital Camera (PictBridge)
75
![](/img.php?id=2134301&img=bg4e.png)
Problem Cause Solution
Cannot print. The specified type of paper is
not loaded.
The specified type of paper is
not loaded.
If you have to use paper that is
not of the specified size,
perform continue printing using
mismatched paper or cancel the
print job. For details, see
page 67 "If a Paper Mismatch
Occurs".
Cannot print. The specified paper size is not
supported by this machine.
Select the paper with the size
that can be printed on the
machine.
3. Printing Documents
76
![](/img.php?id=2134301&img=bg4f.png)
Using Various Print Functions
This section briefly describes various print functions that you can configure with the printer driver to make
printouts appropriate for your purposes.
Print Quality Functions
Print quality and color tone can be adjusted to suit the print data. Some of the print quality settings you
can configure are described below.
Printing color documents in black and white
The black produced in black and white printing is a more distinct black than that produced in color
printing.
Separating the print data into CMYK and printing in designated color only
Normally, all four colors (CMYK) are used for color printing. If you do not want to use certain
colors, you can disable the use of those colors and print using other colors only.
Saving toner when printing (Economy Color printing)
You can save toner by printing with lower toner consumption. The amount of toner that will be used
depends on the object, such as text, line, or image.
Changing the image printing method
You can select to print with priority on print quality or print speed. When printing images, the higher
the resolution of images is, the longer the time is required for printing.
Changing the dither pattern
A dither pattern is a pattern of dots used to simulate a color or shade of an image. If the pattern is
changed, the characteristics of the image will also change. You can select a pattern suitable for the
image to be printed.
Changing the color profiling pattern
You can select a color profiling pattern to adjust the tone of colors according to the colors
displayed on the computer screen.
Because colors on the computer screen are created using the three RGB colors while colors for
printing are composed of the four CMYK colors, colors need to be converted during the printing
process. Therefore, images on the printed paper may look different from those on the computer
screen if adjustment is not performed.
Printing grayscale images using black or CMYK
You can print black or gray sections of an image using black toner only, instead of using all CMYK
toners. Compared to the black printed with CMYK toner, this results in a black that is flatter and
purer.
Using Various Print Functions
77
![](/img.php?id=2134301&img=bg50.png)
Using ICM (Image Color Matching)
You can use Windows ICM function to reproduce colors that appear on the computer screen as
close as they are on printed paper.
To use this function, the color profile must be added to the computer. You can find the color profile
in the ICM folder stored on the provided printer driver CD-ROM. For information about adding a
color profile, search Windows Help for "color profile", and then see the appropriate topic.
• Some of the functions described above might not be available depending on the printer driver or
operating system. For details, see the printer driver Help.
Print Output Functions
You can specify the form of print outputs according to your purposes. This section briefly describes some
of the settings that you can specify.
Printing multiple sets of a document
You can print multiple sets of the same document.
Collating the output in document batches
You can print complete sets of a multiple-page document one set at a time (P1, P2, P1, P2 ...). If this
function is not used when printing multiple sets, prints will be output in page batches (P1, P1, P2,
P2 ...). This function is useful when, for example, making presentation materials.
Changing orientation or rotating the image
You can change the orientation of an image to portrait or landscape. You can also rotate the
image by 180 degrees. Use rotation to prevent an image from being printed upside down when
using paper with a predefined top and bottom (such as letterhead paper).
Printing multiple pages per sheet
You can print multiple pages onto one sheet of paper.
When using this function, a suitable reduction ratio is selected automatically based on the paper
size and the number of pages you want to fit on each sheet.
Printing on both sides of paper (duplex printing)
You can print on both sides of paper.
Reducing or enlarging the document
You can reduce or enlarge documents by a specific ratio, from 25% to 400% in 1% increments.
You can also reduce or enlarge documents automatically to fit a specific paper size. This function is
useful, for example, when printing Web pages.
If the [Enable Large Papers] option is selected, A3/11 × 17/B4/8K documents can be scaled to
a size that the machine supports, so that it can then be printed out.
3. Printing Documents
78
![](/img.php?id=2134301&img=bg51.png)
Not printing of blank pages
If a print job contains blank pages, they can be prevented from being printed.
Note that this setting has higher priority than [Blank Pg. Print] under the system menu of the control
panel.
Printing with a cover page
You can add a cover page to the print job.
You can select to leave the cover page blank, or print the first page of the document on the cover
page. If a cover page is inserted into a duplex job, you can print on its back side also.
Paper for the cover page can either be the same as or different from the remaining pages.
Printing on custom size paper
You can print using non-standard size paper by specifying the size of the paper as custom size.
To specify the custom paper size, select [Custom Paper Size] from the [Document Size:] list, and
then click the [Custom Paper Size...] button in the lower part of the dialog box to configure the
paper size.
Superimposing text on prints (watermark)
You can superimpose watermark text on prints. Various predefined watermarks are provided. You
can also create your own watermarks.
• Some of the functions described above might not be available depending on the printer driver or
operating system. For details, see the printer driver Help.
Using Various Print Functions
79
![](/img.php?id=2134301&img=bg52.png)
3. Printing Documents
80
![](/img.php?id=2134301&img=bg53.png)
4. Configuring the Machine Using the
Control Panel
Basic Operation
1. If you want to configure the machine's system settings, press the [Menu] key.
CER408
2. Press the [ ] or [ ] key to select the settings you want to use.
3. To confirm setting items and values displayed, press the [OK] key.
4. To go back to the previous item, press the [Menu] key.
81
![](/img.php?id=2134301&img=bg54.png)
Menu Chart
This section lists the parameters included in each menu.
For details about configuring the machine using Web Image Monitor, see page 101 "Configuring the
Machine Using Web Image Monitor".
• Some items might not appear depending on the model type or machine's configuration.
• Some items can also be configured using Web Image Monitor.
Paper Input
[Paper Size], [Paper Type], [Tray Priority], [Bypass Priority], [Tray1 Priority]
List/Test Print
[Config. Page], [Menu List], [Test Page], [PCL Font List], [PS Font List], [Maintenance Pg.]
Maintenance
[Color Dens/Reg], [TonerAlmstEmpty], [Anti-Humid Lvl]
System
[Auto Continue], [Copies], [Sub Paper Size], [Def Ppr Size], [Duplex], [Blank Pg. Print], [Energy
Saver 1], [Energy Saver 2], [B&W Page Detect], [Restore Default], [Prt. Err.Report], [BW Prt
Priority] [Auto Cleaning], [PCL6 Mode]
Host Interface
[Timeout:LockPrt], [Timeout: USB], [Timeout: NW], [Network Setting], [Fixed USB Port]
PCL Menu
[Orientation], [Form Lines], [Font Number], [Point Size], [Font Pitch], [Symbol Set], [Courier Font],
[Ext.A4 Width], [Append CR to LF], [Resolution]
PS Menu
[Resolution], [Color Profile]
Language
[English], [French], [German], [Italian], [Spanish], [Dutch], [Swedish], [Norwegian], [Danish],
[Finnish], [Portuguese]
4. Configuring the Machine Using the Control Panel
82
![](/img.php?id=2134301&img=bg55.png)
Paper Input Menu
Paper Size: Tray 1
Specifies the paper size for Tray 1.
Default: (mainly Europe and Asia) [A4], (mainly North America) [8 1/2 x
11]
• A4, B5 JIS, A5, 8 1/2 × 14, 8 1/2 × 11, 7 1/4 × 10 1/2, 8 ×13, 8 1/2 × 13, 8 1/4 ×
13, 16K, Custom Size, 4 1/8 × 9 1/2, 3 7/8 × 7 1/2, C5 Env, C6 Env, DL Env, 5 1/2 × 8
1/2, B6 JIS, A6
Paper Size: Tray 2
Specifies the paper size for Tray 2.
This setting appears only when the optional paper feed unit is installed.
Default: (mainly Europe and Asia) [A4], (mainly North America) [8 1/2 x
11]
• A4, 8 1/2 x 11
Paper Size: Bypass Tray
Specifies the paper size for the bypass tray.
Default: (mainly Europe and Asia) [A4], (mainly North America) [8 1/2 x
11]
• A4, B5 JIS, A5, 8 1/2 × 14, 8 1/2 × 11, 7 1/4 × 10 1/2, 8 ×13, 8 1/2 × 13, 8 1/4 ×
13, 16K, Custom Size, 4 1/8 × 9 1/2, 3 7/8 × 7 1/2, C5 Env, C6 Env, DL Env, 5 1/2 × 8
1/2, B6 JIS, A6
Paper Type: Tray 1
Specifies the paper type for Tray 1.
Default: [Plain Paper]
• Thin Paper, Plain Paper, Middle Thick, Thick Paper 1, Recycled Paper, Color Paper,
Letterhead, Preprinted, Prepunched, Label Paper, Bond Paper, Cardstock, Envelope, Thick
Paper 2
Paper Type: Tray 2
Specifies the paper type for Tray 2.
This setting appears only when the optional paper feed unit is installed.
Default: [Plain Paper]
• Thin Paper, Plain Paper, Middle Thick, Thick Paper 1, Recycled Paper, Color Paper,
Letterhead, Preprinted, Prepunched
Paper Type: Bypass Tray
Specifies the paper type for the bypass tray.
Paper Input Menu
83
![](/img.php?id=2134301&img=bg56.png)
Default: [Plain Paper]
• Thin Paper, Plain Paper, Middle Thick, Thick Paper 1, Recycled Paper, Color Paper,
Letterhead, Prepunched, Label Paper, Bond Paper, Cardstock, Envelope, Thick Paper 2
Tray Priority
Specifies the tray that the printer uses first for printer jobs from Tray 1 or tray 2.
If automatic tray selection is specified for the print job and both tray 1 and Tray 2 contain paper
that matches the print job, the printer starts to print from the specified tray. If that tray runs out of
paper, the printer automatically switches to the other tray to continue printing.
[Tray 2] appears only when the optional paper feed unit is installed.
Default: [Tray 1]
• Tray 1
• Tray 2
Bypass Priority
Specifies how print jobs using the bypass tray are handled.
Default: [Driver/Command]
• Machine Setting
The paper settings configured on the machine's control panel are applied to all print jobs. An
error occurs when the paper settings specified by the printer driver or the print command do
not match the machine's settings.
• Driver/Command
When executing a print job specifying the paper tray, the paper settings specified in the
printer driver or in the print command are applied regardless of the machine's settings.
• Any Size/Type
Printing proceeds even if the paper size/type settings of the printer and printer driver do not
match. However, if the paper is too small for the print job, the printed image will be cropped.
• Any Custom S/T
The printer prints custom size print jobs according to the printer driver’s settings and prints
standard size print jobs according to the printer's settings.
For custom size print jobs, printing proceeds even if the paper size/type settings of the printer
and printer driver do not match. However, if the paper is too small for the print job, the printed
image will be cropped.
For standard size print jobs, an error will occur if the paper size/type settings of the printer
and printer driver do not match.
Tray1 Priority
Specifies how print jobs using the Tray 1 are handled.
Default: [Machine Setting]
4. Configuring the Machine Using the Control Panel
84
![](/img.php?id=2134301&img=bg57.png)
• Machine Setting
The paper settings configured on the machine's control panel are applied to all print jobs. An
error occurs when the paper settings specified by the printer driver or the print command do
not match the machine's settings.
• Driver/Command
When the paper tray is specified for a print job, the paper settings specified in the printer
driver or in the print command are applied, regardless of the machine's settings.
Paper Input Menu
85
![](/img.php?id=2134301&img=bg58.png)
List/Test Print Menu
Printing the Configuration Page
1. Press the [Menu] key.
CER408
The menu screen appears.
2. Press the [ ] or [ ] key to select [List/Test Print], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Config. Page], and then press the [OK] key.
The configuration page is printed. The [List/Test Print] screen appears on completion of printing.
Types of Lists/Reports
• The lists will be printed using the tray set for [Tray Priority] in paper input settings on A4 or Letter
size paper.
Config. Page
Prints general information and the current configurations of the printer.
Menu List
Prints the machine's function menus.
Test Page
Prints a test page for checking the single-sided printing condition. The test page contains network
settings.
PCL Font List
Prints installed PCL font list.
PS Font List
Prints installed PostScript font list.
4. Configuring the Machine Using the Control Panel
86
![](/img.php?id=2134301&img=bg59.png)
Maintenance Pg.
Prints the maintenance page.
List/Test Print Menu
87
![](/img.php?id=2134301&img=bg5a.png)
Maintenance Menu
This section explains about parameters that can be set on the Maintenance menu.
Color Dens/Reg
Adjusts color density and registration automatically.
TonerAlmstEmpty
Specifies the low toner level notification timing.
Default: [Normal]
• Normal
Low toner level notification will be made when the number of pages that can be printed with
the remaining toner is approximately 200.
• Notify Later
Low toner level notification will be made when the number of pages that can be printed with
the remaining toner is approximately 100.
• Notify Sooner
Low toner level notification will be made when the number of pages that can be printed with
the remaining toner is approximately 300.
Anti-Humid Lvl
You can set the printer to produce prints in consistent quality even when humidity is high.
Default: [Off]
• Off
• Level 1
Select this mode if printouts are blurred.
• Level 2
Select this mode if printouts are curled and/or blurred. Note that if you select this mode, the
first print takes longer than subsequent prints.
• Level 3
Select this mode if printouts are still curled and/or blurred even when prints are made in
[Level 2]. Note that this mode requires more time to produce the first print than [Level 2].
4. Configuring the Machine Using the Control Panel
88
![](/img.php?id=2134301&img=bg5b.png)
System Menu
Auto Continue
Sets the printer to ignore an error with paper size or type and continue printing. The printing stops
temporarily when an error is detected, and restarts automatically after about ten seconds using the
settings made on the control panel. However, if the size of paper specified on the control panel
and that of the paper loaded in the paper tray or the paper size specified for the print job do not
match when printing restarts, it may cause a paper jam.
Default: [Off]
• Off
• On
Copies
Sets the machine to print the specified number of sets.
This setting is disabled if the number of pages to print is specified by command or the printer driver.
Default: "1"
• 1 - 999
Sub Paper Size
Sets the printer to print onto paper of another size if the specified paper is not loaded in any tray.
Alternative sizes are preset to A4 and Letter.
Default: [Off]
• Off
• Auto
Def Ppr Size
Specifies the paper size to be used when the paper size is not specified in the print job.
Default: (mainly Europe and Asia) [A4], (mainly North America) [8 1/2 ×
11]
• A4, B5 JIS, A5, B6 JIS, A6, 8 1/2 × 14, 8 1/2 × 11, 5 1/2 × 8 1/2, 7 1/4 × 10 1/2, 8 ×
13, 8 1/2 × 13, 8 1/4 × 13, 16K, 4 1/8 × 9 1/2, 3 7/8 × 7 1/2, C5 Env, C6 Env, DL
Env
Duplex
Sets the printer to print on both sides of paper according to the specified binding method.
Default: [Off]
• Off
• Short Edge Bind
• Long Edge Bind
System Menu
89
![](/img.php?id=2134301&img=bg5c.png)
Blank Pg. Print
Sets the printer to print blank pages.
Note that this setting has lower priority than the printer driver's blank page setting.
When cover sheet printing is enabled from the printer driver, cover sheets are inserted even if you
select [Off].
Default: [On]
• On
• Off
Energy Saver 1
The machine enters Energy Saver mode 1 if the machine has been idle for about 30 seconds. It
takes less time to recover from Energy Saver mode 1 than from power-off state or Energy Saver
mode 2, but power consumption is higher in Energy Saver mode 1 than in Energy Saver mode 2.
Default: [Off]
• Off
• On (30 seconds)
Energy Saver 2
The machine enters Energy Saver mode 2 after the period of time specified for this setting is
passed. The machine consumes less power in Energy Saver mode 2 than in Energy Saver mode 1,
but it takes longer to recover from Energy Saver mode 2 than from Energy Saver mode 1.
Default: [On] (1 minutes)
• On (1 to 240 minutes, in 1 minute increments)
• Off
B&W Page Detect
Sets the printer to print all monochrome pages in monochrome mode even if color printing is
specified.
Default: [On]
• On
• Off
Restore Default
Resets the printer settings to their factory-set defaults.
Prt. Err.Report
Sets the printer to print an error page when the printer detects a printer or memory error.
Default: [Off]
• On
• Off
4. Configuring the Machine Using the Control Panel
90
![](/img.php?id=2134301&img=bg5d.png)
BW Prt Priority
Sets the printer to suppress the consumption of color toner when printing black-and-white pages.
Also, the amount of color toner consumed during warm-up time for maintenance will also be
lowered.
Default: [Off]
• Off
• On
Auto Cleaning
Sets the machine to execute periodic cleaning of the interior. You may hear some noise while
cleaning is being executed. This noise does not indicate a malfunction.
Default: [On]
• On
• Off
PCL6 Mode
Set this to [Universal] when using the Universal Driver and to [SP C250/C252] when using the
normal driver.
Default: [SP C250/C252]
• Universal
• SP C250/C252
System Menu
91
![](/img.php?id=2134301&img=bg5e.png)
Host Interface Menu
Timeout:LockPrt
Specifies how many seconds the printer holds a new Locked Print file, when the printer cannot store
any more Locked Print files. Within this time, you can print or delete the new Locked Print file. You
can also print or delete an existing Locked Print file so that the new Locked Print file can be stored in
the printer.
This setting appears only for the Type 2 model.
Default: "60" seconds
• 0 to 300 seconds, in increments of 1 second
Timeout: USB
Specifies how many seconds the printer should wait before ending a print job that is receiving via
USB. If printing is frequently interrupted by data from other ports, increase the timeout period.
Default: [60 sec.]
• 60 sec.
• 300 sec.
• 15 sec.
Timeout: NW
Specifies how many seconds the printer should wait before ending a print job that is receiving via
Ethernet. If printing operation is frequently interrupted by data from other ports, you can increase
the timeout period.
Default: [60 sec.]
• 60 sec.
• 300 sec.
• 15 sec.
Network Setting
• Ethernet Speed
Displays the current Ethernet speed setting.
Default: [Auto Select]
• Auto Select
• 10Mbps Half D.
• 10Mbps Full D.
• 100Mbps Half D.
• 100Mbps Full D.
• IPsec
4. Configuring the Machine Using the Control Panel
92
![](/img.php?id=2134301&img=bg5f.png)
Selects whether to enable or disable IPsec.
Default: [Inactive]
• Inactive
• Active
• MAC Address
Displays the machine's MAC address.
• Wi-Fi Config.
• Wi-Fi
Select whether to enable or disable Wireless LAN.
Default: [Inactive]
• Inactive
• Active
If [Inactive] is set, [Wi-Fi Status], [MAC Address], [Currnt Connectn], [Setup Wizard],
and [WPS] are not displayed.
• Wi-Fi Status
Displays the current connection status.
• MAC Address
Displays the machine's MAC address.
• Currnt Connectn
Displays detailed information about the connection, such as the SSID and the wireless
signal strength.
• Setup Wizard
Displays the procedure for manually connecting to a wireless LAN. It leads you step-by-
step through configuring the settings for connecting with a wireless LAN.
• WPS
Connects with one touch using WPS (Wi-Fi Protected Setup). For details, see Wi-Fi
Settings Guide.
• IPv4 Config.
• DHCP
Sets the machine to receive its IPv4 address, subnet mask, and default gateway address
automatically from a DHCP server.
Default: [Active]
• Active
• Inactive
Host Interface Menu
93
![](/img.php?id=2134301&img=bg60.png)
• IP Address
Specifies the machine's IPv4 address when DHCP is not used.
Use this menu to check the current IP address when DHCP is used.
Default: XXX.XXX.XXX.XXX
The numbers represented by "X" vary according to your network environment.
• Subnet Mask
Specifies the machine's subnet mask when DHCP is not used.
Use this menu to check the current subnet mask when DHCP is used.
Default: XXX.XXX.XXX.XXX
The numbers represented by "X" vary according to your network environment.
• Gateway Address
Specifies the machine's default gateway address when DHCP is not used.
Use this menu to check the current default gateway address when DHCP is used.
Default: XXX.XXX.XXX.XXX
The numbers represented by "X" vary according to your network environment.
• IP Addr. Method
Displays the IP address acquisition method.
• DHCP
• Auto IP
• Manual Config.
• Default IP
• IPv6 Config.
• IPv6
Selects whether to enable or disable IPv6.
Default: [Active]
• Active
• Inactive
• DHCP
Sets the printer to receive its IPv6 address from a DHCP server.
When DHCP is used, you cannot specify the IPv6 address manually.
Default: [Inactive]
• Inactive
• Active
4. Configuring the Machine Using the Control Panel
94
![](/img.php?id=2134301&img=bg61.png)
• IP Ad. (DHCP)
Displays the IPv6 address obtained from a DHCP server.
• Manual Address
• Manual Address
Specifies the machine's IPv6 address when DHCP is not used. Can contain up to 39
characters.
• Prefix Length
Specifies the prefix length, using a value between 0 and 128.
• Gateway Address
Specifies the IPv6 address of the default gateway. Can contain up to 39 characters.
• Stateless Ad.
Displays the IPv6 stateless addresses obtained from a Router Advertisement.
• Address 1
• Address 2
• Address 3
• Address 4
• Link-local Ad.
Displays the IPv6 link local address.
Fixed USB Port
Specifies whether the same printer driver can be used for multiple printers or not under USB
connection.
Default: [Off]
• On
The same printer driver you have installed in your computer can be used with any printer other
than the one originally used for installation, if the printer is of the same model.
• Off
You must install the printer driver separately for individual printers, because the printer other
than the original will be recognized as a new device upon USB connection.
• Contact your network administrator for information about the network configuration.
Host Interface Menu
95
![](/img.php?id=2134301&img=bg62.png)
PCL Menu
Orientation
Selects the page orientation.
Default: [Portrait]
• Portrait
• Landscape
Form Lines
Specifies the number of lines per page between 5 and 128.
Default: (mainly Europe and Asia) [64], (mainly North America) [60]
Font Number
Specifies the ID of the default font you want to use between 0 and 89.
Default: "0"
Point Size
Specifies the point size you want to use for the default font between 4.00 and 999.75 in 0.25
increments.
Default: [12.00 points]
Font Pitch
Specifies the number of characters per inch you want to use for the default font between 0.44 and
99.99 in 0.01 increments.
This setting is effective only for fixed-space fonts.
Default: [10.00 pitch]
Symbol Set
Specifies the character set for the default font. Available sets are as follows: PC-8, PC-8 D/N,
PC-850, PC-852, PC-858, PC8-TK, Win L1, Win L2, Win L5, Desktop, PS Text, VN Intl, VN US,
MS Publ, Math-8, PS Math, VN Math, Pifont, Legal, ISO 4, ISO 6, ISO 11, ISO 15, ISO 17, ISO
21, ISO 60, ISO 69, Win 3.0, MC Text, ISO L6, ISO L9, PC-775, PC-1004, Win Balt, Roman-8,
Roman-9, ISO L1, ISO L2, ISO L5
Default: [PC-8]
Courier Font
Specifies a courier-type font.
Default: [Regular]
• Regular
• Dark
4. Configuring the Machine Using the Control Panel
96
![](/img.php?id=2134301&img=bg63.png)
Ext.A4 Width
Sets the printer to extend the width of the printable area of A4 size paper, reducing side margin
width.
Default: [Off]
• Off
• On
Append CR to LF
Sets the printer to append a CR code to each LF code to print text data clearly.
Default: [Off]
• Off
• On
Resolution
Specifies the print resolution in dots per inch.
Default: [600 x 600 1bit]
• 600 x 600 1bit
• 600 x 600 2bit
• 600 x 600 4bit
PCL Menu
97
![](/img.php?id=2134301&img=bg64.png)
PS Menu
Resolution
Specifies the print resolution in dots per inch.
Default: [600 x 600 1bit]
• 600 x 600 1bit
• 600 x 600 2bit
• 600 x 600 4bit
Color Profile
Specifies the color profile.
Default: [Solid Color]
• Solid Color
• Presentation
• Photographic
• Off
4. Configuring the Machine Using the Control Panel
98
![](/img.php?id=2134301&img=bg65.png)
Language Menu
You can set language displayed on the menu.
Changing the Language Menu
Use the following procedure to change the language.
1. Press the [Menu] key.
CER408
2. Press the [ ] or [ ] key to select [Language], and then press the [OK] key.
3. Press the [ ] or [ ] key to select the language, and then press the [OK] key.
The selected item is displayed for two seconds with an asterisk, and then the [Language] screen
appears.
4. Press the [Menu] key to return to the initial screen.
You can select the language you want to use. Available languages are as follows:
English, French, German, Italian, Spanish, Dutch, Swedish, Norwegian, Danish, Finnish, Portuguese.
Language Menu
99
![](/img.php?id=2134301&img=bg66.png)
4. Configuring the Machine Using the Control Panel
100
![](/img.php?id=2134301&img=bg67.png)
5. Configuring the Machine Using Web
Image Monitor
Using Web Image Monitor
• To operate the machine via Web Image Monitor, you must first configure the machine's TCP/IP or
wireless LAN settings. For details, see page 92 "Host Interface Menu" or see page 113
"Configuring the Network Settings".
• Some items might not appear, depending on the model type you are using.
• Some items can also be configured using the control panel.
Available operations
The following operations can be performed remotely using Web Image Monitor on a computer:
• Displaying the machine’s status or settings
• Configuring the machine's settings
• Configuring the user restriction settings
• Configuring the network settings
• Configuring the IPsec settings
• Printing reports
• Setting the administrator password
• Resetting the machine's configuration to the factory default
• Creating backup files of the machine's configuration
• Restoring the machine's configuration from backup files
• Configuring the machine's Energy Saver mode setting
Supported Web browsers
• Windows:
Internet Explorer 6.0- 11.0
• Mac OS X:
Safari 3.0- 6.0
101
![](/img.php?id=2134301&img=bg68.png)
Displaying Top Page
When you access the machine using Web Image Monitor, the top page appears in your browser's
window.
1. Launch the Web browser.
2. In the Web browser's address bar, enter "http://(machine’s IP address)/" to access the
machine.
If a DNS or WINS server is used and the machine’s host name has been specified, you can enter
the host name instead of the IP address.
The top page of Web Image Monitor appears.
Top page
Every Web Image Monitor page is divided into the following areas:
DAC524
1
2 3
4
1. Menu area
Clicking a menu shows its contents in the main area.
2. Tab area
Contains tabs for switching between information and settings you want to see or configure.
3. FAQs/Knowledge Base
Provides answers to frequently asked questions and other useful information about using this
machine.
An internet connection is required to view this information.
5. Configuring the Machine Using Web Image Monitor
102
![](/img.php?id=2134301&img=bg69.png)
4. Main area
Displays the contents of the item selected in the menu area.
Information in the main area is not automatically updated. Click [Refresh] at the upper-right in
the main area to update the information. Click the Web browser's [Refresh] button to refresh
the entire browser screen.
• If you use an older version of a supported Web browser or the Web browser has JavaScript and
cookies disabled, display and operation problems may occur.
• If you are using a proxy server, configure the Web browser settings as necessary. For details about
the settings, contact your network administrator.
• The previous page may not appear even if the back button of the Web browser is clicked. If this
happens, click the refresh button of the Web browser.
• The FAQs (Frequently Asked Questions)/Knowledge Base are not available in certain languages.
Changing the Interface Language
Select the desired interface language from the [Language] list.
Displaying Top Page
103
![](/img.php?id=2134301&img=bg6a.png)
Checking the System Information
Click [Home] to display the main page of Web Image Monitor. You can check the current system
information on this page.
This page contains three tabs: [Status], [Counter], and [Machine Information].
Status Tab
Item Description
Model Name Shows the name of the machine.
Location Shows the location of the machine as registered on the [SNMP] page.
Contact Shows the contact information of the machine as registered on the [SNMP]
page.
Host Name Shows the host name specified in [Host Name] on the [DNS] page.
Device Status Shows the current messages on the machine's display.
Toner
Item Description
Black Shows the amount of black toner remaining.
Magenta Shows the amount of magenta toner remaining.
Yellow Shows the amount of yellow toner remaining.
Cyan Shows the amount of cyan toner remaining.
Waste Toner Bottle Shows the remaining life of the waste toner bottle, as "Status OK", "Almost
Full" or "Full".
Intermediate Transfer
Unit
Shows the remaining life of the intermediate transfer unit, as "Status OK",
"Replacement Required Soon" or "Replacement Required".
For replacing, contact your sales or service representative.
Fusing Unit Shows the remaining life of the fusing unit, as "Status OK", "Replacement
Required Soon" or "Replacement Required".
For replacing, contact your sales or service representative.
5. Configuring the Machine Using Web Image Monitor
104
![](/img.php?id=2134301&img=bg6b.png)
Item Description
Transfer Roller Shows the remaining life of the transfer roller, as "Status OK", "Replacement
Required Soon" or "Replacement Required".
For replacing, contact your sales or service representative.
Paper Tray
Item Description
Tray 1 Shows the current state and paper size/type setting of Tray 1.
Tray 2 Shows the current state and paper size/type setting of Tray 2.
Bypass Tray Shows the current state and paper size/type setting of the bypass tray.
• If a non-genuine print cartridge is installed, toner life cannot be reliably indicated.
• The information about intermediate transfer unit, fusing unit, and transfer roller appear only for the
Type 2 model.
• The information about Tray 2 appears only when it is installed.
Counter Tab
Machine Counter
Item Description
Machine Counter Shows the following for pages printed, including lists/reports:
• Total number of pages
• Number of color pages
• Number of black-and-white pages
Black Shows the following for pages printed, including lists/reports:
• Accumulated value of black toner A4 page coverage (in percent)
• Accumulated value of black toner consumption (converted into fully-
covered A4 pages)
Checking the System Information
105
![](/img.php?id=2134301&img=bg6c.png)
Item Description
Cyan Shows the following for pages printed, including lists/reports:
• Accumulated value of cyan toner A4 page coverage (in percent)
• Accumulated value of cyan toner consumption (converted into fully-
covered A4 pages)
Magenta Shows the following for pages printed, including lists/reports:
• Accumulated value of magenta toner A4 page coverage (in percent)
• Accumulated value of magenta toner consumption (converted into
fully-covered A4 pages)
Yellow Shows the following for pages printed, including lists/reports:
• Accumulated value of yellow toner A4 page coverage (in percent)
• Accumulated value of yellow toner consumption (converted into fully-
covered A4 pages)
Economy Color Prints
Item Description
Economy Color Prints
(Color)
Shows the number of pages printed in Economy Color Printing mode using
the printer function.
Black Shows the following for pages printed in Economy Color Printing mode
using the printer function:
• Accumulated value of black toner A4 page coverage (in percent)
• Accumulated value of black toner consumption (converted into fully-
covered A4 pages)
Cyan Shows the following for pages printed in Economy Color Printing mode
using the printer function:
• Accumulated value of cyan toner A4 page coverage (in percent)
• Accumulated value of cyan toner consumption (converted into fully-
covered A4 pages)
Magenta Shows the following for pages printed in Economy Color Printing mode
using the printer function:
• Accumulated value of magenta toner A4 page coverage (in percent)
• Accumulated value of magenta toner consumption (converted into
fully-covered A4 pages)
5. Configuring the Machine Using Web Image Monitor
106
![](/img.php?id=2134301&img=bg6d.png)
Item Description
Yellow Shows the following for pages printed in Economy Color Printing mode
using the printer function:
• Accumulated value of yellow toner A4 page coverage (in percent)
• Accumulated value of yellow toner consumption (converted into fully-
covered A4 pages)
Duplex
Item Description
Duplex Total Page Shows the total number of sheets printed on both sides.
• A sheet printed on both sides counts as two printed pages.
Machine Information Tab
Machine Information
Item Description
Firmware Version Shows the version of firmware installed on the machine.
Engine FW Version Shows the version of firmware for the machine engine.
PCL Version Shows the version of the PCL interpreter.
PS Version Shows the version of the PS interpreter.
Machine ID Shows the identification number of the machine.
Total Memory Shows the total memory installed on the machine.
Checking the System Information
107
![](/img.php?id=2134301&img=bg6e.png)
Configuring the System Settings
Click [System Settings] to display the page for configuring the system settings.
This page contains the following tabs: [Tray Paper Settings], [B&W Print Priority] and [I/O Timeout].
Tray Paper Settings Tab
Tray 1
Item Description
Paper Size Select the paper size for Tray 1 from the following:
A4, B5 JIS, A5, B6 JIS, A6, 8 1/2 × 14, 8 1/2 × 11, 5 1/2 × 8 1/2, 7
1/4 × 10 1/2, 8 × 13, 8 1/2 × 13, 8 1/4 × 13, 16K, 4 1/8 × 9 1/2, 3
7/8 × 7 1/2, C5 Env, C6 Env, DL Env, Custom Size
Paper Type Select the paper type for Tray 1 from the following:
Thin Paper (60-65g/m2), Plain Paper (66-74g/m2), Middle Thick Paper
(75-90g/m2), Thick Paper 1 (91-105g/m2), Recycled Paper, Color
Paper, Letterhead, Preprinted Paper, Prepunched Paper, Label Paper, Bond
Paper, Cardstock, Envelope, Thick Paper 2 (106-160g/m2)
Tray 2
Item Description
Paper Size Select the paper size for Tray 2 from the following:
A4, 8 1/2 × 11
Paper Type Select the paper type for Tray 2 from the following:
Thin Paper (60-65g/m2), Plain Paper (66-74g/m2), Middle Thick Paper
(75-90g/m2), Thick Paper 1 (91-105g/m2), Recycled Paper, Color
Paper, Letterhead, Preprinted Paper, Prepunched Paper
Bypass Tray
Item Description
Paper Size Select the paper size for the bypass tray from the following:
A4, B5 JIS, A5, B6 JIS, A6, 8 1/2 × 14, 8 1/2 × 11, 5 1/2 × 8 1/2, 7
1/4 × 10 1/2, 8 × 13, 8 1/2 × 13, 8 1/4 × 13, 16K, 4 1/8 × 9 1/2, 3
7/8 × 7 1/2, C5 Env, C6 Env, DL Env, Custom Size
5. Configuring the Machine Using Web Image Monitor
108
![](/img.php?id=2134301&img=bg6f.png)
Item Description
Paper Type Select the paper type for the bypass tray from the following:
Thin Paper (60-65g/m2), Plain Paper (66-74g/m2), Middle Thick Paper
(75-90g/m2), Thick Paper 1 (91-105g/m2), Recycled Paper, Color
Paper, Letterhead, Prepunched Paper, Label Paper, Bond Paper,
Cardstock, Envelope, Thick Paper 2 (106-160g/m2)
Priority Tray
Item Description
Priority Tray Select the tray that the printer uses first for printer jobs from Tray 1 or Tray
2.
If automatic tray selection is specified for the print job and both Tray 1 and
Tray 2 contain paper that matches the print job, the printer starts to print
from the specified tray. If that tray runs out of paper, the printer
automatically switches to the other tray to continue printing.
Tray 1 Priority
Item Description
Tray 1 Priority Select how print jobs using the Tray 1 are handled.
• System Settings
The paper settings configured on the machine's control panel are
applied to all print jobs. An error occurs when the paper settings
specified by the printer driver or the print command do not match the
machine's settings.
• Driver/Command
When executing a print job specifying the paper tray, the paper
settings specified in the printer driver or in the print command are
applied regardless of the machine's settings.
Configuring the System Settings
109
![](/img.php?id=2134301&img=bg70.png)
Bypass Tray Setting Priority
Item Description
Bypass Tray Setting
Priority
Select how print jobs using the bypass tray are handled.
• System Settings
The paper settings configured on the machine's control panel are
applied to all print jobs. An error occurs when the paper settings
specified by the printer driver or the print command do not match the
machine's settings.
• Driver/Command
When executing a print job specifying the paper tray, the paper
settings specified in the printer driver or in the print command are
applied regardless of the machine's settings.
• Any Size/Type
Printing proceeds even if the paper size/type settings of the machine
and printer driver do not match, but if the paper is too small for the
print job, the printed image will be cropped.
• Any Custom Size/Type
The machine prints custom size print jobs according to the printer
driver’s settings and prints standard size print jobs according to the
machine’s settings.
For custom size print jobs, printing proceeds even if the paper size/
type settings of the machine and printer driver do not match, but if the
paper is too small for the print job, the printed image will be cropped.
For standard size print jobs, an error will occur if the paper size/type
settings of the machine and printer driver do not match.
• The information about Tray 2 appears only when it is installed.
5. Configuring the Machine Using Web Image Monitor
110
![](/img.php?id=2134301&img=bg71.png)
I/O Timeout Tab
I/O Timeout
Item Description
Fixed USB Port Specifies whether the same printer can be used for multiple machines or not
under USB connection.
If this setting is enabled, the same printer driver you have installed in your
computer can be used with any machine other than the one originally used
for installation, if the machine is of the same model.
If disabled, you must install the printer driver separately for individual
machines, because the machine other than the original will be recognized
as a new device upon USB connection.
Locked Print Timeout
(seconds)
Specifies how many seconds the machine holds a new Locked Print file,
when the machine cannot store any more Locked Print files (0 to 300
seconds). Within this time, you can print or delete the new Locked Print file.
You can also print or delete an existing Locked Print file so that the new
Locked Print file can be stored in the machine.
• [Locked Print Timeout (seconds)] appears only for the Type 2 model.
Black-and-White Print Priority Tab
B&W Print Priority
Item Description
B&W Print Priority Enable this setting to suppress the consumption of color toner when printing
black-and-white pages. Also, amount of color toner consumed during
warm-up time for maintenance will also be lowered.
Configuring the System Settings
111
![](/img.php?id=2134301&img=bg72.png)
Restricting Machine Functions According to
User
You can set the machine to require a user code when someone tries to use certain machine functions. For
details about configuring the user restriction settings, see page 37 "Restricting Machine Functions
According to User".
• This function is available for the Type 2 model only.
• To print jobs that require authentication you can use only the PCL printer driver. Printing such jobs
from the PostScript 3 printer driver is not possible.
Using Web Image Monitor, enable user restriction for all or some of the functions listed below, and then
register users who can use those functions.
• PictBridge printing
• Printing (both color and black-and-white)
• Color printing
For each user, you can specify which functions are available upon authentication. Up to 30 users can be
registered.
• For details about configuring the user restriction settings, see page 37 "Restricting Machine
Functions According to User".
5. Configuring the Machine Using Web Image Monitor
112
![](/img.php?id=2134301&img=bg73.png)
Configuring the Network Settings
Click [Network Settings] to display the page for configuring the network settings.
This page contains the following tabs: [Network Status], [IPv6 Configuration], [Network Application],
[DNS], [Auto E-mail Notification], [SNMP], [SMTP], [POP3], and [Wireless].
• Depending on the settings you change, the machine might need to be restarted.
• Depending on the model you are using, some items might not appear.
Network Status Tab
General Status
Item Description
Ethernet Speed Shows the type and speed of the network connection.
IPP Printer Name Shows the name used to identify the machine on the network.
Network Version Shows the version of the machine's network module (a part of the machine
firmware).
Ethernet MAC Address Shows the Ethernet MAC address of the machine.
Active Interface Shows the active communication method.
TCP/IP Status
Item Description
DHCP Select whether the machine should receive a dynamic IPv4 address
automatically using DHCP. To use DHCP, select [Active]. When enabled,
the items below cannot be configured.
IP Address Enter the IPv4 address for the machine.
Subnet Mask Enter the subnet mask of the network.
Gateway Enter the IPv4 address of the network gateway.
Configuring the Network Settings
113
![](/img.php?id=2134301&img=bg74.png)
IPv6 Configuration Tab
IPv6
Item Description
IPv6 Select whether to enable or disable IPv6. You cannot disable IPv6 using
Web Image Monitor if the machine is currently in use in an IPv6
environment. In this case, use the control panel to disable [IPv6] under
network settings.
When disabled, [DHCP], [Manual Configuration Address], [Prefix Length],
and [Gateway Address] below cannot be configured.
IPv6 Address
Item Description
DHCP Select whether or not the machine obtains its IPv6 address from a DHCP
server.
IP Address (DHCP) Displays the IPv6 address obtained from the DHCP server when [DHCP] is
set to [Active].
Stateless Address Displays up to four stateless auto addresses.
Gateway Address Displays the machine's default gateway address.
Link-local Address Displays the link local address of the machine. The link local address is an
address that is valid only inside the local network (local segment).
Manual Configuration
Address
Enter the machine's IPv6 address. Can contain up to 39 characters.
Prefix Length Enter the prefix length, using a value between 0 and 128.
Gateway Address Enter the default gateway's IPv6 address. Can contain up to 39 characters.
Network Application Tab
Network Print Setting
Item Description
IPP Select to enable network printing using Internet Print Protocol (via TCP port
631/80).
5. Configuring the Machine Using Web Image Monitor
114
![](/img.php?id=2134301&img=bg75.png)
Item Description
FTP Select to enable network printing using an embedded FTP server in the
machine (via TCP port 20/21).
RAW Select to enable network raw printing.
Port No. Enter the TCP port number to use for raw printing. The valid range is 1024
to 65535, except 53550 and 49999 (default is 9100).
LPR Select to enable network printing using LPR/LPD (via TCP port 515).
mDNS Setting
Item Description
mDNS Select to enable Multicast DNS (via UDP port 5353). If disabled, the item
below cannot be configured.
Printer Name Enter the name of the machine. Can contain up to 32 characters.
DNS Tab
DNS
Item Description
DNS Method Select whether to specify domain name servers manually or receive DNS
information from the network automatically. When set to [Auto-Obtain
(DHCP)], [Primary DNS Server], [Secondary DNS Server], and [Domain
Name] below become unavailable.
Primary DNS Server Enter the IPv4 address of the primary DNS.
Secondary DNS Server Enter the IPv4 address of the secondary DNS.
Domain Name Enter the IPv4 domain name for the machine. Can contain up to 32
characters.
IPv6 DNS Method Select whether to specify the domain server manually or have the machine
obtain its DNS information automatically.
When set to [Auto-Obtain (DHCP)], [Primary IPv6 DNS Server],
[Secondary IPv6 DNS Server], and [IPv6 Domain Name] below become
unavailable.
Configuring the Network Settings
115
![](/img.php?id=2134301&img=bg76.png)
Item Description
Primary IPv6 DNS
Server
Enter the IPv6 address of the primary IPv6 DNS server. Can contain up to
39 characters.
Secondary IPv6 DNS
Server
Enter the IPv6 address of the secondary IPv6 DNS server. Can contain up
to 39 characters.
IPv6 Domain Name Enter the IPv6 domain name of the machine. Can contain up to 32
characters.
DNS Resolve Priority Select whether to give priority to IPv4 or IPv6 for DNS name resolution.
DNS Timeout (seconds) Enter the number of seconds the machine waits before considering a DNS
request to have timed out (1 to 999 seconds).
Host Name Enter a host name for the machine. Can contain up to 15 characters.
Auto E-mail Notification Tab
E-mail Notification 1/E-mail Notification 2
Item Description
Display Name Enter a sender name for notification e-mail. Can contain up to 32
characters.
E-mail Address Enter the address of the recipient of the alert email. Can contain up to 64
characters.
Paper Misfeed Select to send an alert e-mail to the specified address if a paper jam occurs.
Out of Paper Select to send an alert e-mail to the specified address if paper runs out.
Toner Almost Empty Select to send an alert e-mail to the specified address if toner becomes low.
Call Service Select to send an alert e-mail to the specified address if the machine
requires servicing.
Out of Toner Select to send an alert e-mail to the specified address if toner runs out.
Cover Open Select to send an alert e-mail to the specified address if a cover is open.
5. Configuring the Machine Using Web Image Monitor
116
![](/img.php?id=2134301&img=bg77.png)
SNMP Tab
SNMP
Item Description
SNMP Select whether to enable the machine to use SNMP services.
Trap
Item Description
Target Trap Select whether to enable the machine to send traps to the management host
(NMS).
When disabled, [SNMP Management Host 1] and [SNMP Management
Host 2] below become unavailable.
SNMP Management
Host 1
Enter the IP address or host name of a management host. Can contain up to
64 characters.
SNMP Management
Host 2
Enter the IP address or host name of a management host. Can contain up to
64 characters.
Community
Item Description
Get Community Enter the community name to use for authentication of Get requests. Can
contain up to 32 characters.
Trap Community Enter the community name to use for authentication of Trap requests. Can
contain up to 32 characters.
System
Item Description
Location Enter the location of the machine. The location entered here is displayed on
the main page. Can contain up to 64 characters.
Contact Enter the contact information of the machine. The contact information
entered here is displayed on the main page. Can contain up to 64
characters.
Configuring the Network Settings
117
![](/img.php?id=2134301&img=bg78.png)
SMTP Tab
SMTP
Item Description
Primary SMTP Server Enter the IP address or host name of the SMTP/POP3 server. Can contain
up to 64 characters.
Port No. Enter the port number for SMTP (1 to 65535).
Authentication Method Select an authentication method from the following:
[Anonymous]: The user name and password are not necessary.
[SMTP]: The machine supports NTLM and LOGIN authentication.
[POP before SMTP]: The POP3 server is used for authentication. When
sending e-mails to an SMTP server, you can enhance the SMTP server
security level by connecting to the POP server for authentication.
User Name Enter the user name for logging in to the SMTP server. Can contain up to 32
characters.
Password Enter the password for logging in to the SMTP server. Can contain up to 32
characters.
Device E-mail Address Enter the machine’s e-mail address.
This address is used as the sender's address of e-mail messages sent from
this machine, such as notification e-mails. Can contain up to 64 characters.
Server Timeout
(seconds)
Enter the number of seconds the machine waits before considering an
SMTP operation to have timed out (1 to 999).
POP3 Tab
POP3 Settings
Item Description
POP3 Server Enter the IP address or host name of the POP3 server for e-mail reception.
The POP3 server specified here will be used for [POP before SMTP]. Can
contain up to 64 characters.
User Account Enter the user name for logging in to the POP3 server. Can contain up to 32
characters.
5. Configuring the Machine Using Web Image Monitor
118
![](/img.php?id=2134301&img=bg79.png)
Item Description
User Password Enter the password for logging in to the POP3 server. Can contain up to 32
characters.
Authentication Select an authentication method from the following:
[None]: Password will not be encrypted.
[APOP Authentication]: Password will be encrypted.
[Auto]: Password will be encrypted or not encrypted according to the POP3
server’s settings.
Wireless Tab
Wireless LAN Status
Item Description
Wireless LAN Status Displays the status of the connection to the wireless LAN.
MAC Address Displays the MAC address.
Communication Mode Displays the communication mode that the machine is connecting in.
SSID Displays the SSID of the access point that the machine is connected to.
Channel Displays the channel information of the current wireless LAN settings if [Ad-
Hoc] is selected for [Communication Mode].
Wireless Signal Status Displays the strength of the wireless signal that is being received.
Wireless Specifies whether or not to use the wireless LAN.
Wireless LAN Settings
Item Description
SSID Enter the SSID of the access point.
The SSID can contain up to 32 characters.
When you click [Scan List], a list of available access points is displayed.
You can select the SSID from the list.
Configuring the Network Settings
119
![](/img.php?id=2134301&img=bg7a.png)
Item Description
Communication Mode Select the mode to connect in.
If the machine will be connected to a wireless router or access point, select
[Infrastructure]. If the machine will be connected to a device equipped with
a wireless LAN directly, select [Ad-Hoc].
Ad-Hoc Channel If [Ad-Hoc] is selected for [Communication Mode], select a channel.
Authentication Select an authentication method.
If [Ad-Hoc] is selected for [Communication Mode], you can select only
[Open System] and [Shared Key].
Encryption Select an encryption method.
If [Ad-Hoc] is selected for [Communication Mode], you can select only
[None] and [WEP].
WPA Passphrase If [WPA2-PSK] or [Mixed Mode WPA/WPA2] is selected for
[Authentication], enter the WPA encryption key.
WEP Key Length If [WEP] is selected for [Encryption], select 64 bits or 128 bits for the length
of the encryption key.
WEP Transmit Key ID Select an ID number to identify each WEP key in case multiple WEP
connections are configured.
WEP Key Format Select a format for entering the WEP key.
WEP Key Enter the WEP key. The number and type of characters you can enter vary
depending on the length and format selected for the key. See the following:
• WEP key length: [64bit], Format: [Hexadecimal]
WEP key max length: 10 characters (0-9, A-F, a-f)
• WEP key length: [64bit], Format: [ASCII]
WEP key max length: 5 characters (0x20-0x7e)
• WEP key length: [128bit], Format: [Hexadecimal]
WEP key max length: 26 characters (0-9, A-F, a-f)
• WEP key length: [128bit], Format: [ASCII]
WEP key max length: 13 characters (0x20-0x7e)
• If you are configuring the connection settings manually, check the SSID, authentication method, or
encryption key of the access point or wireless router in advance.
5. Configuring the Machine Using Web Image Monitor
120
![](/img.php?id=2134301&img=bg7b.png)
Configuring the IPsec Settings
Click [IPsec Settings] to display the page for configuring the IPsec settings.
This page contains the following tabs: [IPsec Global Settings] and [IPsec Policy List].
• This function is available only when an administrator password is specified.
IPsec Global Settings Tab
Item Description
IPsec Function Select whether to enable or disable IPsec.
Default Policy Select whether to allow for the default IPsec policy.
Broadcast and
Multicast Bypass
Select the services that you do not want to apply IPsec from the following:
[DHCPv4], [DHCPv6], [SNMP], [mDNS], [NetBIOS], [UDP Port 53550]
All ICMP Bypass Select whether to apply IPsec to ICMP packets (IPv4 and IPv6) from the
following:
[Active]: All ICMP packets will be bypassed without IPsec protection.
"ping" command (echo request and echo reply) is not encapsulated by
IPsec.
[Inactive]: Some ICMP message types will be bypassed without IPsec
protection.
IPsec Policy List Tab
Item Description
No. IPsec policy number.
Name Displays the name of the IPsec policy.
Address Settings Displays the IP address filter of the IPsec policy as below:
Remote address/Prefix length
Action Displays the action of the IPsec policy as "Allow", "Drop", or "Require
Security".
Configuring the IPsec Settings
121
![](/img.php?id=2134301&img=bg7c.png)
Item Description
Status Displays the status of the IPsec policy as "Active" or "Inactive".
To configure IPsec policies, select the desired IPsec policy, and then click [Change] to open the "IPsec
Policy Settings" page. The following settings can be made on the "IPsec Policy Settings" page.
IP Policy Settings
Item Description
No. Specify a number between 1 and 10 for the IPsec policy. The number you
specify will determine the position of the policy in the IPsec Policy List. Policy
searching is performed according to the order of the list. If the number you
specify is already assigned to another policy, the policy you are
configuring will take the number of the earlier policy, and the earlier policy
and any subsequent policies will be renumbered accordingly.
Activity Select whether to enable or disable the policy.
Name Enter the name of the policy. Can contain up to 16 characters.
Address Type Select IPv4 or IPv6 as the type of IP address to be used in IPsec
communication.
Local Address Displays the IP address of this printer.
Remote Address Enter the IPv4 or IPv6 address of the device with which to communicate.
Can contain up to 39 characters.
Prefix Length Enter the prefix length of the Remote Address, using a value between 1 and
128. If this setting is left blank, "32" (IPv4) or "128" (IPv6) will be
automatically selected.
Action Specify how the IP packets are processed from the following:
• [Allow]: IP packets are both sent and received without IPsec applied to
them.
• [Drop]: IP packets are discarded.
• [Require Security]: IPsec is applied to IP packets that are both sent and
received.
If you have selected [Require Security], you must configure [IPsec Settings]
and [IKE Settings].
5. Configuring the Machine Using Web Image Monitor
122
![](/img.php?id=2134301&img=bg7d.png)
IPsec Settings
Item Description
Encapsulation Type Specify the encapsulation type from the following:
• [Transport]: Select this mode to secure only the payload section of
each IP packet when communicating with IPsec compliant devices.
• [Tunnel]: Select this mode to secure every section of each IP packet.
We recommend this type for communication between security
gateways (such as VPN devices).
Security Protocol Select the security protocol from the following:
• [AH]: Establishes secure communication that supports authentication
only.
• [ESP]: Establishes secure communication that supports both
authentication and data encryption.
• [ESP&AH]: Establishes secure communication that supports both data
encryption and authentication of packets, including packet headers.
Note that you cannot specify this protocol when [Tunnel] is selected
for [Encapsulation Type].
Authentication
Algorithm for AH
Specify the authentication algorithm to be applied when [AH] or [ESP&AH]
is selected for [Security Protocol] from the following:
[MD5], [SHA1]
Encryption Algorithm
for ESP
Specify the encryption algorithm to be applied when [ESP] or [ESP&AH] is
selected for [Security Protocol] from the following:
[None], [DES], [3DES], [AES-128], [AES-192], [AES-256]
Authentication
Algorithm for ESP
Specify the authentication algorithm to be applied when [ESP] is selected
for [Security Protocol] from the following:
[MD5], [SHA1]
Life Time Specify the life time of the IPsec SA (Security Association) as a time period
or data volume. The SA will expire when the time period you specify
elapses or the volume of data you specify reaches the volume carried.
If you specify both a time period and a data volume, the SA will expire as
soon as either is reached, and a new SA will then be obtained by
negotiation.
To specify the life time of the SA as a time period, enter a number of
seconds.
To specify the life time of the SA as a data volume, enter a number of KBs.
Configuring the IPsec Settings
123
![](/img.php?id=2134301&img=bg7e.png)
Item Description
Key Perfect Forward
Secrecy
Select whether to enable or disable PFS (Perfect Forward Secrecy).
IKE Settings
Item Description
IKE Version Displays the IKE version.
Encryption Algorithm Specify the encryption algorithm from the following:
[DES], [3DES], [AES-128], [AES-192], [AES-256]
Authentication
Algorithm
Specify the authentication algorithm from the following:
[MD5], [SHA1]
IKE Life Time Specify the life time of the ISAKMP SA as a time period. Enter a number of
seconds.
IKE Diffie-Hellman
Group
Select the IKE Diffie-Hellman Group to be used in the generation of the IKE
encryption key from the following:
[DH1], [DH2]
Pre-Shared Key Specify the PSK (Pre-Shared Key) to be used for authentication of a
communicating device. Can contain up to 32 characters.
Key Perfect Forward
Secrecy
Select whether to enable or disable PFS (Perfect Forward Secrecy).
5. Configuring the Machine Using Web Image Monitor
124
![](/img.php?id=2134301&img=bg7f.png)
Printing Lists/Reports
Click [Print List/Report] to display the page for printing reports. Then, select an item and click [Print] to
print out information for that item.
Print List/Report
Item Description
Configuration Page Prints general information about the machine and its current configuration.
Test Page Prints a test page for checking the printing condition.
PCL Font List Prints the current configuration and installed PCL font list.
PS Font List Prints the current configuration and installed PostScript font list.
Maintenance Page Prints the maintenance page.
• Reports cannot be printed via Web Image Monitor if other jobs are printing. Before printing
reports, confirm that machine is not printing.
• Reports will be printed on A4 or Letter size paper. Load one of these sizes of paper into the tray
before printing reports.
Printing Lists/Reports
125
![](/img.php?id=2134301&img=bg80.png)
Configuring the Administrator Settings
Click [Administrator Tools] to display the page for configuring the administrator settings.
This page contains the following tabs: [Administrator], [Reset Settings], [Backup Setting], [Restore
Setting], [Energy Saver Mode], and [PCL6 Mode].
Administrator Tab
Administrator Settings
Item Description
New Password Enter the new administrator password. Can contain up to 16 characters.
Confirm New Password Enter the same password again, to confirm.
Reset Settings Tab
Reset Settings
Item Description
Reset Network Settings Select to restore settings configured under the [Network Settings] and
[Administrator Tools].
Reset Menu Settings Select to restore settings that are not related to the network to their defaults.
Reset Settings of
Available Functions
Select to clear the user restriction settings.
Reset IPsec Settings Select to clear the IPsec settings.
• [Reset IPsec Settings] appears only when the administrator password is specified.
Backup Setting Tab
• When sending the machine for repair, it is important that you create backup files in advance. The
machine's settings are returned to the default after repair.
5. Configuring the Machine Using Web Image Monitor
126
![](/img.php?id=2134301&img=bg81.png)
Backup Setting
Item Description
Back up Network
Settings
Backs up settings configured under the [Network Settings] and
[Administrator Tools].
Back up Menu Settings Backs up settings that are not related to the network.
Back up Settings of
Available Functions
Backs up user restriction settings to a file.
Back up IPsec Settings Backs up the IPsec settings to a file.
Follow the procedure below to create configuration backup files.
1. Select the radio button for the type of data you wish to back up.
2. Enter the administrator password if required.
3. Click [OK].
4. Click [Save] in the confirmation dialog box.
5. Navigate to the location to save the backup file.
6. Specify a name for the file, and click [Save].
• [Back up IPsec Settings] appears only when the administrator password is specified.
Restore Setting Tab
• When the machine is returned from repair, it is important that you restore the machine's settings
from the backup files. The machine's settings are returned to the default after repair.
Restore Setting
Item Description
File to Restore Enter the path and name of the file to restore, or click [Browse...] to select
the file.
Follow the procedure below to restore configuration backup files.
1. Click [Browse...].
2. Navigate to the directory containing the backup file to restore.
3. Select the backup file, and click [Open].
Configuring the Administrator Settings
127
![](/img.php?id=2134301&img=bg82.png)
4. Enter the administrator password if required.
5. Click [OK].
• If the settings are not restored successfully, an error message appears. Try again to restore the file
completely.
Energy Saver Mode Tab
Energy Saver Mode
Item Description
Energy Saver Mode 1 Select [Active] to set the machine to enter Energy Saver mode 1 if the
machine has been idle for about 30 seconds.
It takes less time to recover from Energy Saver mode 1 than from power-off
state or Energy Saver mode 2, but power consumption is higher in Energy
Saver mode 1 than in Energy Saver mode 2.
Energy Saver Mode 2 Select [Active] to set the machine to enter Energy Saver mode 2 after the
period of time specified for [Waiting Time (1 min. - 240 min.)] is passed (1
to 240 minutes).
The machine consumes less power in Energy Saver mode 2 than in Energy
Saver mode 1, but it takes longer to recover from Energy Saver mode 2
than from Energy Saver mode 1.
• The printer recovers from Energy Saver mode when it receives a print job or when any key on the
machine is pressed.
PCL6 Mode
PCL6 Mode
Item Description
PCL6 Mode Set this to [Universal] when using the Universal Driver and to [SP C250/
C252] when using the normal driver.
5. Configuring the Machine Using Web Image Monitor
128
![](/img.php?id=2134301&img=bg83.png)
6. Maintaining the Machine
Replacing the Print Cartridge
• Store print cartridge in a cool dark place.
• Actual printable numbers vary depending on image volume and density, number of pages printed
at a time, paper type and size, and environmental conditions such as temperature and humidity.
Toner quality degrades over time. Early replacement of the print cartridge might be necessary.
Therefore, we recommend you always keep a new print cartridge ready.
• For good print quality, the manufacturer recommends that you use genuine toner from the
manufacturer.
• The manufacturer shall not be responsible for any damage or expense that might result from the use
of parts other than genuine parts from the manufacturer with your office products.
• When the toner runs out, pressing the [Stop/Start] key allows you to print a few more pages, but
the print quality of those pages may be lower.
Messages on the screen
• Replace the indicated print cartridge when any of the following messages appear on the
screen:
"Replace Toner:" (X)
("X" indicates the toner color)
• Prepare the indicated print cartridge when any of the following messages appear on the
screen:
"Repl Tnr soon:" (X)
("X" indicates the toner color)
• Do not allow paper clips, staples, or other small objects to fall inside the machine.
• Do not expose the print cartridge without its cover to direct sunlight for a long time.
• Do not touch the print cartridge's photo conductor unit.
129
![](/img.php?id=2134301&img=bg84.png)
DAC045
• Do not touch the ID chip on the side of the print cartridge as shown below.
DAC046
• When removing print cartridges, be careful not to touch the laser scanning unit under the upper
cover (the position shown by the arrow in the illustration below).
DAC044
• If cyan, magenta, or yellow toner runs out, you can print in black and white using just the black
toner. Change the color mode setting to Black and White using the machine's driver.
• If black toner runs out, you cannot print in black and white or color until the black print cartridge is
replaced.
6. Maintaining the Machine
130
![](/img.php?id=2134301&img=bg85.png)
1. Pull up the lever on the top cover, and then carefully raise the top cover.
DAC477
2. Carefully lift out the print cartridge vertically, holding its center.
From the rear, the print cartridges are installed in the order of cyan (C), magenta (M), yellow (Y),
and black (K).
DAC040
• Do not shake the removed print cartridge. Doing so can cause remaining toner to leak.
• Place the old print cartridge on paper or similar material to avoid dirtying your workspace.
• The toner color is indicated by the label on each print cartridge.
3. Take the new print cartridge out of the box, and then take it out of the plastic bag.
DAC036
Replacing the Print Cartridge
131
![](/img.php?id=2134301&img=bg86.png)
4. Hold the print cartridge and shake it from side to side five or six times.
DAC039
Even distribution of toner within the bottle improves print quality.
5. Remove the protective cover from the print cartridge.
DAC037
6. Check the toner color and corresponding location, and then carefully insert the print
cartridge vertically.
DAC043
6. Maintaining the Machine
132
![](/img.php?id=2134301&img=bg87.png)
7. Using both hands, hold the center of the top cover and close the cover carefully. Be
careful not to trap your fingers.
DAC064
8. Attach the protective cover you removed in Step 5 on the old print cartridge. Then, put the
old print cartridge into the bag, and then put it into the box.
DAC038
• Make sure to cover the old print cartridge with the protective cover for recycling and environmental
purposes.
• Comply with the print cartridge recycling program, whereby used print cartridges are collected for
processing. For details, ask your sales or service representative.
Replacing the Print Cartridge
133
![](/img.php?id=2134301&img=bg88.png)
Replacing the Waste Toner Bottle
Messages on the screen
• Replace the waste toner bottle when the following message appears on the screen:
"Replace Waste Toner Bottle"
• Prepare a waste toner bottle when the following message appears on the screen:
"Almost Full Waste Toner Bottle"
• Waste toner bottles cannot be reused.
• For easy replacement, we recommend you purchase and store extra waste toner bottles.
• When removing the waste toner bottle, make sure not to tilt it.
• Make sure the transfer unit is installed. If the transfer unit is not installed, install it before turning on
the power.
• Comply with the waste toner bottle recycling program, whereby used waste toner bottles are
collected for processing. For details, ask your sales or service representative.
• Before removing the waste toner bottle from the machine, spread paper or similar material around
the area to keep toner from dirtying your workspace.
1. Pull the front cover open lever and then carefully lower the front cover.
2
1
DAC061
6. Maintaining the Machine
134
![](/img.php?id=2134301&img=bg89.png)
2. Slide both levers on the front cover forward.
DAC089
3. Holding the tabs on both ends of the transfer unit, tilt it backwards and lift it up.
2
1
DAC088
4. Holding the handle at the center of the waste toner bottle, carefully pull it partially out
without tilting it.
DAC076
Replacing the Waste Toner Bottle
135
![](/img.php?id=2134301&img=bg8a.png)
5. Pull the waste toner bottle halfway out, hold the bottle firmly, and then pull it straight out.
DAC077
DAC078
To prevent the waste toner bottle from coming into contact with the intermediate transfer unit (the
position shown by the arrow in the illustration below), do not lift the bottle while pulling it out.
DAC081
6. Maintaining the Machine
136
![](/img.php?id=2134301&img=bg8b.png)
6. Close the bottle cap.
DAC083
DAC082
7. Holding the center of the new waste toner bottle, carefully insert it halfway into the
machine body.
Leave the bottle cap open.
DAC079
To prevent the waste toner bottle from coming into contact with the intermediate transfer unit (the
position shown by the arrow in the illustration below), do not lift the bottle while inserting it.
Replacing the Waste Toner Bottle
137
![](/img.php?id=2134301&img=bg8c.png)
DAC080
8. Push in the waste toner bottle until it clicks.
Pressing the handle at the center, push the bottle all the way in.
DAC075
9. Place the transfer unit on the front cover. Slide the transfer unit along the guide rails into
the machine.
DAC086
6. Maintaining the Machine
138
![](/img.php?id=2134301&img=bg8d.png)
10. When it stops, push on the PUSH mark until it clicks.
DAC087
11. Using both hands, carefully push up the front cover until it closes.
DAC062
• When closing the front cover, push the upper area of the cover firmly.
Replacing the Waste Toner Bottle
139
![](/img.php?id=2134301&img=bg8e.png)
Replacing a Component
Replacing the Intermediate Transfer Unit
• This function is available for the Type 2 model only.
If the Alert indicator on the control panel lights up and the "Replace Intermdt Transfer Belt" message
appears on the display, contact your sales or service representative.
Replacing the Fusing Unit and Transfer Roller
• This function is available for the Type 2 model only.
If the Alert indicator on the control panel lights up and the "Replace Fusing Unit" or "Replace Transfer
Roller" message appears on the display, contact your sales or service representative.
6. Maintaining the Machine
140
![](/img.php?id=2134301&img=bg8f.png)
Cautions When Cleaning
Clean the machine periodically to maintain high print quality.
Dry wipe the exterior with a soft cloth. If it is not sufficient, wipe with a soft, damp cloth that has been
wrung out thoroughly. If you still cannot remove the stain or grime, use a neutral detergent, wipe over
the area with a thoroughly-wrung damp cloth, and then dry wipe the area and allow it to dry.
• To avoid deformation, discoloration, or cracking, do not use volatile chemicals, such as benzine
and thinner, or spray insecticide on the machine.
• If there is dust or grime inside the machine, wipe with a clean, dry cloth.
• Disconnect the plug from the wall outlet at least once a year. Clean away any dust and grime from
the plug and outlet before reconnecting. Accumulated dust and grime may cause fire.
• Do not allow paper clips, staples, or other small objects to fall inside the machine.
Cautions When Cleaning
141
![](/img.php?id=2134301&img=bg90.png)
Cleaning the Toner Density Sensor
Clean the toner density sensor when the following message appears on the control panel.
"Density Sensor Require Cleaning"
1. Pull up the lever on the top cover, and then carefully raise the top cover.
DAC477
2. Remove the rearmost print cartridge.
DAC040
3. Slide the toner density sensor lever once to the left.
DAC093
6. Maintaining the Machine
142
![](/img.php?id=2134301&img=bg91.png)
4. Carefully insert the print cartridge removed in Step 2 vertically.
DAC043
5. Using both hands, hold the center of the top cover and close the cover carefully. Be
careful not to trap your fingers.
DAC064
Cleaning the Toner Density Sensor
143
![](/img.php?id=2134301&img=bg92.png)
Cleaning the Friction Pad and Paper Feed
Roller
If the friction pad or paper feed roller is dirty, a multi-feed or misfeed might occur. In this case, clean the
friction pad and paper feed roller as follows:
• Do not use chemical cleaning fluids or organic solvents such as thinner or benzine.
1. Turn off the power.
2. Unplug the power cord from the wall outlet. Remove all the cables from the machine.
3. Pull out Tray 1 carefully with both hands.
DAC070
Place the tray on a flat surface. If there is paper in the tray, remove it.
4. Wipe the friction pad with a damp cloth.
DAC057
6. Maintaining the Machine
144
![](/img.php?id=2134301&img=bg93.png)
5. Wipe the rubber part of the roller with a soft damp cloth. After that, wipe it with a dry
cloth to remove the moisture.
DAC068
6. Push the metal plate down until it clicks.
DAC050
7. Reload the removed paper into the tray, and then push the tray carefully into the machine
until it clicks.
DAC069
8. Insert the plug of the power cord into the wall socket securely. Connect all the cables that
were removed.
9. Turn on the power.
Cleaning the Friction Pad and Paper Feed Roller
145
![](/img.php?id=2134301&img=bg94.png)
• paper jam or multi-sheet feed still occurs after cleaning the friction pad, contact your sales or
service representative.
• If the optional Tray 2 is installed, clean its friction pad and paper feed roller in the same way as
you did for Tray 1.
6. Maintaining the Machine
146
![](/img.php?id=2134301&img=bg95.png)
Cleaning the Registration Roller and Paper
Tray
The registration roller and paper tray can become dirty with paper dust if you print to non-standard
paper.
Clean the registration roller if white dots appear on prints.
• Do not use chemical cleaning fluids or organic solvents such as thinner or benzine.
• Do not touch the transfer roller (as shown below).
DAC091
1. Turn off the power.
2. Unplug the power cord from the wall outlet. Remove all the cables from the machine.
3. Pull out Tray 1 carefully with both hands.
DAC070
Place the tray on a flat surface. If there is paper in the tray, remove it.
Cleaning the Registration Roller and Paper Tray
147
![](/img.php?id=2134301&img=bg96.png)
4. Wipe the inside of the paper tray with a cloth.
DAC060
5. Push the metal plate down until it clicks.
DAC050
6. Reload the removed paper into the tray, and then push the tray carefully into the machine
until it clicks.
DAC069
6. Maintaining the Machine
148
![](/img.php?id=2134301&img=bg97.png)
7. Pull the front cover open lever and then carefully lower the front cover.
2
1
DAC061
Be sure to set the registration roller in the position shown by the arrow in the illustration below.
DAC085
Clean the registration roller if prints are smeared after a paper jam is cleared.
8. Clean the registration roller by applying a soft damp cloth while turning it.
9. Using both hands, carefully push up the front cover until it closes.
DAC062
10. Plug in the power cord securely. Connect all the cables that were removed.
11. Turn on the power.
• When closing the front cover, push the upper area of the cover firmly.
Cleaning the Registration Roller and Paper Tray
149
![](/img.php?id=2134301&img=bg98.png)
6. Maintaining the Machine
150
![](/img.php?id=2134301&img=bg99.png)
7. Troubleshooting
Removing Paper Jams
If a paper jam occurs, one of the following messages appears on the control panel:
Message Reference title
Internal Misfeed See page 152 "If paper jams inside the fusing
unit".
Misfd: Stnd Tray
Misfeed: PprTray See page 154 "If paper jams inside a tray".
Misfeed: Tray 1
Misfeed: Tray 2
Misfd: Dupl Unit See page 156 "If paper jams inside the transfer
unit".
See the section identified by the message and remove the jammed paper accordingly.
Removing Printing Jams
• The inside of this machine becomes very hot. Do not touch the parts labeled " " (indicating a
hot surface).
• Some of this machine's internal components get very hot. For this reason, take care when
removing misfed paper. Not doing so could result in burns.
• Jammed paper may be covered in toner. Be careful not to get toner on your hands or clothes.
• Toner on prints made immediately after clearing a paper jam may be insufficiently fused and may
smudge. Make test prints until smudges no longer appear.
• Do not forcefully remove jammed paper, as it may tear. Torn pieces remaining inside the machine
will cause further jams and possibly damage the machine.
• Paper jam can cause pages to be lost. Check your print job for missing pages and reprint any
pages that did not print out.
151
![](/img.php?id=2134301&img=bg9a.png)
If paper jams inside the fusing unit
If paper jams inside the fusing unit, follow the procedure below to remove it.
• Since the temperature around the guide is high, wait for it to cool down before checking for
jammed paper.
1. Pull the front cover open lever and then carefully lower the front cover.
2
1
DAC061
2. Lower the fusing unit lever, and pull out the jammed paper carefully.
DAC340
Do not touch the fusing unit.
DAC605
Pull the paper downward to remove it. Do not pull it upward.
7. Troubleshooting
152
![](/img.php?id=2134301&img=bg9b.png)
DAC074
If you cannot find the jammed paper, check for it by pulling down the guide.
DAC073
3. Pull up the fusing unit levers.
DAC071
Removing Paper Jams
153
![](/img.php?id=2134301&img=bg9c.png)
4. Using both hands, carefully push up the front cover until it closes.
DAC062
• When closing the front cover, push the upper area of the cover firmly. After closing the cover,
check that the error is cleared.
If paper jams inside a tray
If paper jams in Tray 1 or 2, follow the procedure below to remove it.
1. Pull the front cover open lever and then carefully lower the front cover.
2
1
DAC061
2. Pull out the jammed paper carefully.
DAC084
7. Troubleshooting
154
![](/img.php?id=2134301&img=bg9d.png)
Do not touch the fusing unit.
DAC605
If paper has jammed inside the transfer unit, holding both sides of the paper, pull the paper
carefully forward and out.
DAC092
3. Using both hands, carefully push up the front cover until it closes.
DAC062
• Do not pull out the paper tray (Tray 1).
• If paper is jammed in Tray 2 but is difficult to locate, pull out Tray 2 to remove it. After removing the
paper, carefully push Tray 2 all the way back inside the machine.
• When closing the front cover, push the upper area of the cover firmly. After closing the cover,
check that the error is cleared.
Removing Paper Jams
155
![](/img.php?id=2134301&img=bg9e.png)
If paper jams inside the transfer unit
If paper jams inside the transfer unit, follow the procedure below to remove it.
1. Pull the front cover open lever and then carefully lower the front cover.
2
1
DAC061
2. Carefully remove any paper that is jammed under the transfer unit.
DAC090
If you cannot find the jammed paper, look inside the machine.
3. Using both hands, carefully push up the front cover until it closes.
DAC062
• When closing the front cover, push the upper area of the cover firmly. After closing the cover,
check that the error is cleared.
7. Troubleshooting
156
![](/img.php?id=2134301&img=bg9f.png)
Common Problems
This section explains how to troubleshoot common problems that may occur while operating the
machine.
Problem Possible cause Solution
The machine does not turn on. The power cord is not
connected properly.
• Make sure that the power
plug is firmly inserted into
the wall outlet.
• Make sure that the wall
outlet is not defective by
connecting another
working device.
An error message appears on
the machine's screen.
An error has occurred. See page 172 "Error & Status
Messages on the Control
Panel".
The red indicator is lit. An error has occurred. See page 176 "Panel
Indicator".
Pages are not printed. The machine is warming up or
receiving data.
Wait until "Printing..." appears
on the screen. If "Processing..."
is displayed on the screen, the
machine is receiving data.
Pages are not printed. The interface cable is not
connected correctly.
• Reconnect the cable.
• Check that the interface
cable is the correct type.
Strange noise is heard. • The supplies or options are
not properly installed.
• The machine executes
periodic cleaning of the
interior when [Auto
Cleaning] in [System] is set
to [On].
Check if the supplies or options
are properly installed.
The noise does not indicate a
malfunction. Wait until the
cleaning is complete.
• If any of these problems persist, turn off the power, pull out the power cord, and contact your sales
or service representative.
Common Problems
157
![](/img.php?id=2134301&img=bga0.png)
Paper Feed Problems
If the machine is operating but paper will not feed or paper jams frequently, check the condition of the
machine and paper.
Problem Solution
Paper does not feed smoothly. • Use supported types of paper. See page 41 "Supported
Paper".
• Load paper correctly, making sure that the paper guides
are properly adjusted. See page 54 "Loading Paper".
• If the paper is curled, straighten the paper.
• Take out the paper from the tray and fan it well. Then,
reverse the top and bottom of the paper, and put it back
in the tray.
Paper jams frequently. • If there are gaps between the paper and paper guides,
adjust the paper guides to remove the gaps.
• Avoid printing on both sides of paper when printing
images that contain large solid areas, which consume a
large amount of toner.
• Use supported types of paper. See page 41 "Supported
Paper".
• Load paper only as high as the upper limit markings on
the paper guide.
• Make sure that the friction pads, paper feed rollers or
registration rollers are clean. See page 144 "Cleaning
the Friction Pad and Paper Feed Roller".
7. Troubleshooting
158
![](/img.php?id=2134301&img=bga1.png)
Problem Solution
Multiple sheets of paper are fed at
once.
• Fan the paper well before loading. Also make sure that
the edges are aligned by tapping the stack on a flat
surface such as a desk.
• Make sure that the paper guides are in the right position.
• Use supported types of paper. See page 41 "Supported
Paper".
• Load paper only as high as the upper limit markings on
the paper guide.
• Make sure that the friction pads, paper feed rollers or
registration rollers are clean. See page 144 "Cleaning
the Friction Pad and Paper Feed Roller" and page 147
"Cleaning the Registration Roller and Paper Tray".
• Check that paper was not added while there was still
some left in the tray.
Only add paper when there is none left in the tray.
The printed paper is wrinkled. • The paper being used may be damp. Use paper that has
been stored properly. See page 41 "Supported Paper".
• Paper is too thin. See page 41 "Supported Paper".
• If there are gaps between the paper and the paper
guides, adjust the paper guides to remove the gaps.
• Check that both the left and right fusing unit levers have
been raised to the plain paper mark.
The printed paper is curled. • Load the paper upside down in the paper tray.
• If the paper curl is severe, retrieve prints from the output
tray more frequently.
• The paper being used may be damp. Use paper that has
been stored properly. See page 41 "Supported Paper".
• Select [Level 2] or [Level 3] in [Anti-Humid Lvl] under
[Maintenance]. Note that if you select [Level 2] or [Level
3], the first print takes longer than subsequent prints.
Paper Feed Problems
159
![](/img.php?id=2134301&img=bga2.png)
Problem Solution
Images are not printed in the right
position
DAC606
• Adjust the front end paper guide and both side paper
guides to match the paper size.
See page 54 "Loading Paper".
Images are printed diagonally to the
pages.
DAC572
If there are gaps between the paper and the paper guides,
adjust the paper guides to remove the gaps.
7. Troubleshooting
160
![](/img.php?id=2134301&img=bga3.png)
Print Quality Problems
Checking the Condition of the Machine
If there is a problem with the print quality, first check the condition of the machine.
Problem Solution
There is a problem with the
machine's location.
Make sure that the machine is on a level surface. Place the
machine where it will not be subject to vibration or shock.
Unsupported types of paper is used. Make sure that the paper being used is supported by the
machine. See page 41 "Supported Paper".
The paper type setting is incorrect. Make sure that the paper type setting of the printer driver
matches the type of paper loaded. See page 41 "Supported
Paper".
A non-genuine print cartridge is
being used.
Refilled or non-genuine print cartridge reduces print quality
and may cause malfunctions. Use genuine print cartridge only.
See page 187 "Consumables".
An old print cartridge is being used. Print cartridge should be opened before their expiration date
and used within six months after being opened.
The machine is dirty. See page 129 "Maintaining the Machine", and clean the
machine as required.
Color degradation has occurred. Color degradation may occur in color printing after the
machine is moved or a large number of pages are printed. In
this case, adjust color registration by executing [Color Dens/
Reg] in [Maintenance].
Print Quality Problems
161
![](/img.php?id=2134301&img=bga4.png)
Checking the printer driver settings
Problem Solution
The printed image is smudged. PCL 5c/6
On the printer driver's [Paper] tab, select [Bypass Tray] in
the "Input Tray:" list. In the "Paper Type:" list, select a
proper paper type.
PostScript 3
On the printer driver's [Paper/Quality] tab, select
[Bypass Tray] in the "Paper Source" list. In the "Media"
list, select a proper paper type.
Images smudge when rubbed.
(Toner is not fixed.)
PCL 5c/6
On the printer driver's [Paper] tab, select a proper paper
type in the "Paper Type:" list.
PostScript 3
On the printer driver's [Paper/Quality] tab, select a
proper paper type in the "Media" list.
The printed image is different from
the image on the computer's display.
Only when using PCL 5c/6
On the printer driver's [Print Quality] tab, select [Raster]
in the "Graphics Mode" list.
When printing graphics, the output
and the screen are different.
To print accurately, specify the printer driver setting to print
without using the graphics command. For details about
specifying the printer driver setting, see the printer driver Help.
Images are cut off, or excess is
printed.
Use the same size paper selected in the application. If you
cannot load paper of the correct size, use the reduction
function to reduce the image, and then print. For details about
the reduction function, see the printer driver Help.
Photo images are coarse. Use the application's or printer driver's settings to specify a
higher resolution.
For details about the printer driver's settings, see the printer
driver Help.
A solid line is printed as a dashed
line or appears blurred.
Change the dithering settings on the printer driver. For details
about the dithering settings, see the printer driver Help.
7. Troubleshooting
162
![](/img.php?id=2134301&img=bga5.png)
Problem Solution
Fine lines are fuzzy, of inconsistent
thickness, or do not appear.
Change the dithering settings on the printer driver. For details
about the dithering settings, see the printer driver Help.
If the problem persists, specify the settings of the application in
which the image was created to change the thickness of the
lines.
Print Quality Problems
163
![](/img.php?id=2134301&img=bga6.png)
Printer Problems
This section describes printing problems and possible solutions.
When You Cannot Print Properly
Problem Solution
An error occurs. If an error occurs when printing, change the computer or
printer driver settings.
• Check the printer icon name does not exceed 32
alphanumeric characters. If it does, shorten it.
• Check whether other applications are operating.
Close any other applications, as they may be interfering
with printing. If the problem is not resolved, close
unneeded processes too.
• Check that the latest printer driver is being used.
A Locked Print file is canceled. • The machine already has 5 jobs or 5 MB of Locked Print
data. Print or delete an existing Locked Print file. For
details, see page 69 "Printing Confidential Documents".
• Even if the machine cannot store any more Locked Print
files, the machine holds the new Locked Print file for the
period of time specified in [Timeout:LockPrt] under [Host
Interface] before canceling that file. Within this time, you
can print or delete the new Locked Print file. You can also
print or delete an existing Locked Print file so that the new
Locked Print file can be stored in the machine.
For details about [Timeout:LockPrt], see page 92 "Host
Interface Menu".
Only when using PCL 5c/6
The Locked Print file has too many pages or it is too large.
Reduce the number of pages to print, or print with a
lower setting for [Gradation:] in [Print Quality]. For
details, see the printer driver Help.
7. Troubleshooting
164
![](/img.php?id=2134301&img=bga7.png)
Problem Solution
There is a considerable delay
between the print start command
and actual printing.
• Processing time depends on data volume. High volume
data, such as graphics-heavy documents, take longer to
be processed.
• To speed up printing, reduce the printing resolution using
the printer driver. For details, see the printer driver Help.
• The machine is calibrating color. Wait for a while.
Documents are not printed properly
when using a certain application, or
image data is not printed properly.
Some characters are printed faintly
or not printed.
Change the print quality settings.
It takes too long to complete the print
job.
• Photographs and other data intensive pages take a long
time to be processed so simply wait when printing such
data.
• Changing the settings with printer driver may help to
speed up printing.
See the printer driver Help.
• The data is so large or complex that it takes a long time
to be processed.
• If the Data In indicator is flashing, the data is being
processed.
Just wait until it printing is resumed.
• If the Data In indicator on the control panel is flashing,
the printer is warming up. Wait for a while.
• The printer is adjusting the color registration. Wait for a
while.
A printed image is different from the
image on the computer's display.
• When you use some functions, such as enlargement and
reduction, the layout of the image might be different from
that displayed in the computer display.
• Check that the page layout settings are properly
configured in the application.
• Make sure the paper size selected in the printer
properties dialog box matches the size of the paper
loaded. For details, see the printer driver Help.
Printer Problems
165
![](/img.php?id=2134301&img=bga8.png)
Problem Solution
Images are cut off, or excess pages
are printed.
If you are using paper whose size is smaller than the paper
size selected in the application, use the same size paper
selected in the application. If you cannot load paper of the
correct size, use the reduction function to reduce the image,
and then print.
See the printer driver Help.
The color of the printout is different
from the color on the computer's
display.
• The colors made using color toner may be different from
colors displayed on the display due to the difference of
methods to reproduce colors.
Only when using PCL 5c/6
• Color gradation might appear differently if [On] is
selected for [Economy Color] on the [Print Quality]
tab in the printer driver's dialog box.
See the printer driver Help.
• Turn off the main power, and then turn it back on. If the
color still appears different on the printout, perform the
[Color Dens/Reg] under [Maintenance]. For details, see
page 88 "Maintenance Menu".
If this procedure fails to resolve the problem, contact your
sales or service representative.
Color changes extremely when
adjusted with the printer driver.
Only when using PCL 5c/6
Do not make extreme settings for the color balance under
the [Print Quality] tab in the printer driver's dialog box.
See the printer driver Help.
Color documents are printed in
black and white.
• The printer driver is not set up for color printing.
See the printer driver Help.
• Some applications print color files in black and white.
7. Troubleshooting
166
![](/img.php?id=2134301&img=bga9.png)
When You Cannot Print Clearly
Problem Solution
The whole printout is blurred. • The paper being used may be damp. Use paper that has
been stored properly. See page 41 "Supported Paper".
• Select [Level 2] or [Level 3] in [Anti-Humid Lvl] under
[Maintenance]. Note that if you select [Level 2] or [Level
3], the first print takes longer than subsequent prints.
• If you select [On] for [Economy Color] in the [Print
Quality] tab (PCL printer driver) or under [Printer
Features] (PostScript 3 printer driver), print will be at
lower density. For details, see the printer driver Help.
• The print cartridge is almost empty. If "Replace Toner: X"
("X" indicates the toner color) appears on the screen,
replace the indicated print cartridge.
• Condensation may have occurred. If rapid change in
temperature or humidity occurs, use this machine only
after it has acclimatized.
The toner is powdery and comes
away from the paper, or the printed
image has a matt appearance.
Check if the fusing unit levers are properly set. Pull up the
fusing unit levers.
Toner smears appear on the print
side of the page.
• The paper setting may not be correct. For example,
although you are using thick paper, the setting for thick
paper may not be specified.
Check the printer driver's paper settings.
See the printer driver Help.
• Check that the paper is not curled or bent. Envelopes can
be curled easily. Flatten out the paper before loading it.
See page 54 "Loading Paper".
Printer Problems
167
![](/img.php?id=2134301&img=bgaa.png)
Problem Solution
White lines appear.
DAC607
The intermediate transfer belt is dirty.
Follow the procedure below to clean the belt:
1. Open the top cover while the power is on.
2. Remove all print cartridges from the printer.
3. Close the top cover with both hands carefully.
4. When cleaning finishes, open the top cover and attach
all the print cartridges again.
If this procedure does not resolve the problem, contact your
sales or service representative.
Horizontal lines appear on the
printed paper.
• Impact can cause lines to appear on printed paper and
other malfunctions.
Protect the printer from impact at all times, especially
while it is printing.
• If lines appear on prints, turn the printer off, wait a few
moments, and then turn it back on again. Then, perform
the print job again.
The print color is different from the
color specified.
If a specific color is missing, turn the power switch off and on.
If this does not resolve the problem, contact your sales or
service representative.
Photo images are coarse. Some applications lower the resolution for making prints.
A color is missing or a printed image
is partially blurred.
• The paper being used may be damp. Use paper that has
been stored properly.
See page 54 "Loading Paper".
• Toner is almost empty. If the following message appears
on the control panel, replace the print cartridge:
"Replace Toner: X". ("X" indicates the toner color)
See page 129 "Replacing the Print Cartridge".
• Condensation may have occurred. If rapid change in
temperature or humidity occurs, use this printer only after
it has acclimatized.
Color shift occurs. Perform the [Color Dens/Reg] under [Maintenance].
For details, see page 88 "Maintenance Menu".
7. Troubleshooting
168
![](/img.php?id=2134301&img=bgab.png)
Problem Solution
White spots appear. The surrounding registration roller or paper tray can become
dirty with paper dust if you use paper other than standard
paper.
Wipe any paper dust off both the paper tray and registration
roller.
See page 147 "Cleaning the Registration Roller and Paper
Tray".
Colorless dots appear on solid color
printouts.
Change the paper type currently selected in the Paper Type
settings, and then print.
Eg. [Recycled Paper] to [Thin Paper] to [Plain Paper].
See page 54 "Loading Paper".
White streaks or color streaks
appear.
Toner is almost empty. If an error message appears on the
control panel, replace the print cartridge of the color
indicated.
See page 129 "Replacing the Print Cartridge".
The backs of printed sheets are
blemished.
• When removing a jammed sheet, the inside of the printer
may have become dirty. Print several sheets until they
come out clean.
• If document size is larger than paper size, e.g. A4
document on B5 paper, the back of the next printed sheet
may become dirty.
The Data In indicator is not flashing
or lit.
If the Data In indicator is not flashing or lit, the data is not
being sent to the printer.
If the printer is connected to the computer using the interface
cable.
Check the port connection setting is correct.
Network Connection
Contact your network administrator.
Black gradation is not natural. Only when using PostScript 3
Select [CMY + K] for [Gray Reproduction] in the printer
driver's dialog box.
See the printer driver Help.
Printer Problems
169
![](/img.php?id=2134301&img=bgac.png)
Problem Solution
Solid lines are printed as broken
lines.
Only when using PostScript 3
Change the [Dithering] setting in the printer driver's
dialog box.
See the printer driver Help.
Fine dot patterns do not print. Only when using PostScript 3
Change the [Dithering] setting in the printer driver's
dialog box.
See the printer driver Help.
Solid areas, lines or text are shiny or
glossy when created as a mixture of
cyan, magenta, yellow.
Only when using PostScript 3
Select [Black by K] for [Gray Reproduction] in the printer
driver's dialog box.
See the printer driver Help.
Speckling occurs in areas of solid
black print.
Only when using PostScript 3
Select [CMY + K] for [Gray Reproduction] in the printer
driver's dialog box.
See the printer driver Help.
If rubbed with your finger, the print
smears.
The setting of the paper may not be correct. For example,
although thick paper is used, the setting for thick paper may
not be specified.
• Check the paper settings of this printer.
See page 54 "Loading Paper".
• Check the paper settings of the printer driver.
See the printer driver Help.
When Paper Is Not Fed Properly
Problem Solution
Prints fall behind the machine when
they are delivered.
Pull up the appropriate stop fence (forward fence for A4/
Letter, rear fence for Legal size prints). See page 17 "Guide to
Components".
7. Troubleshooting
170
![](/img.php?id=2134301&img=bgad.png)
Problem Solution
Prints do not stack properly. • The paper being used may be damp. Use paper that has
been stored properly. See page 41 "Supported Paper".
• Select [Level 2] or [Level 3] in [Anti-Humid Lvl] under
[Maintenance]. Note that if you select [Level 2] or [Level
3], the first print takes longer than subsequent prints.
• Pull up the appropriate stop fence (forward fence for
A4/Letter, rear fence for Legal size prints). See page 17
"Guide to Components".
The printed paper is curled. • Load the paper upside down in the paper tray.
• If the paper curl is severe, retrieve prints from the output
tray more frequently.
• The paper being used may be damp. Use paper that has
been stored properly.
• Select [Level 1], [Level 2] or [Level 3] in [Anti-Humid Lvl]
under [Maintenance]. Note that if you select [Level 2] or
[Level 3], the first print takes longer than subsequent
prints.
Printed envelopes come out creased. Check if the fusing unit levers are properly set. Lower the fusing
unit levers.
Other Printing Problems
Problem Solution
The toner has run out and printing
has stopped.
When the toner runs out, pressing the [Stop/Start] key allows
you to print a few more pages, but the print quality of those
pages may be lower.
Printer Problems
171
![](/img.php?id=2134301&img=bgae.png)
Error & Status Messages on the Control Panel
This section explains what the messages that appear on the control panel mean and what to do when a
particular message appears.
Status messages
Message Explanation Recommended Action
Offline The machine is Offline. To start printing, switch the
machine to online by pressing
the [Stop/Start] key on the
control panel.
Processing... The machine is printing. Wait a while.
Ready This is the default ready
message.
The machine is ready for use.
No action is required.
Calibrating... The machine is calibrating. Wait a while.
Printing... The machine is printing. Wait a while.
Please wait The machine is waiting for the
next data to print.
Wait a while.
Warming up... The printer is warming up or
toner is being supplied.
Wait until "Ready" appears on
the display.
Messages
Message Explanation Recommended Action
SizeMsmtch:#Start/JobReset The paper size setting in the tray
# (1, 2, bypass) differs from
that of actual paper size in the
tray.
Load paper of the selected size
in the tray, and then press the
[Stop/Start] key to continue
printing.
Press the [Job Reset] key to
cancel printing.
TypeMsmtch:#Start/JobReset The paper type setting in the
tray # (1, 2, bypass) differs
from that of actual paper type in
the tray.
Load paper of the selected type
in the tray, and then press the
[Stop/Start] key to continue
printing.
Press the [Job Reset] key to
cancel printing.
7. Troubleshooting
172
![](/img.php?id=2134301&img=bgaf.png)
Message Explanation Recommended Action
Move Env. Lever The fusing unit levers are not
positioned correctly.
When printing on an envelope,
check that the left and right
levers have been lowered to the
envelope mark.
When printing on paper, check
that the left and right levers have
been raised to the plain paper
mark.
Cover Open The top or front cover is open. Open and then close the top or
front cover.
Controller FW Download failed Controller FW could not be
downloaded.
Turn off the main power, turn it
back on, and then download
the controller FW again.
If the download fails again,
contact your sales or service
representative.
Incorrect Tnr: # Irregular toner # (Black,
Magenta, Cyan or Yellow) is
set.
Replace the toner to an
appropriate one. See
page 129 "Replacing the Print
Cartridge".
If the error message appears
even though the toner cartridge
is attached correctly, use a dry
cloth to wipe the part of the
toner cartridge that is in contact
with the machine.
Load Paper # The indicated tray # (1, 2,
bypass) is out of paper.
Load paper into the indicated
paper tray.
See page 54 "Loading Paper".
Memory Overflow This error occurs when FW
memory is not enough to save
the printing page.
Reduce the size of the data, and
then try the operation again.
Error & Status Messages on the Control Panel
173
![](/img.php?id=2134301&img=bgb0.png)
Message Explanation Recommended Action
Misfd: Dupl Unit There is a paper jam in the
duplex unit.
Remove the misfed paper.
See page 151 "Removing
Printing Jams".
Internal Misfeed There is a paper jam in the
fusing unit.
Misfeed: PprTray There is a paper jam in Tray 1
or Tray 2.
Misfeed: Tray 1 There is a paper jam in Tray 1.
Misfeed: Tray 2 There is a paper jam in Tray 2.
Misfd: Stnd Tray There is a paper jam in the
paper exit area.
Remove paper from Bypass
Tray
The machine failed to proceed
with the print job, because Tray
1 or Tray 2 was specified as the
input tray but paper was loaded
in the bypass tray.
Remove paper from the bypass
tray.
Replace Toner: # The printer is out of toner #
(Black, Magenta, Cyan or
Yellow).
Replace the print cartridge.
See page 129 "Replacing the
Print Cartridge".
Repl Tnr soon: # The printer is almost out of toner
# (Black, Magenta, Cyan or
Yellow).
Prepare a new print cartridge.
Replace Fusing Unit It is time to replace the Fusing
unit.
Contact your sales or service
representative.
Replace Intermdt Transfer Belt It is time to replace the transfer
belt.
Contact your sales or service
representative.
Replace Transfer Roller It is time to replace the transfer
roller.
Contact your sales or service
representative.
Replace soon: Waste Tnr Bottle The waste toner bottle needs to
be replaced soon.
Prepare a new waste toner
bottle.
7. Troubleshooting
174
![](/img.php?id=2134301&img=bgb1.png)
Message Explanation Recommended Action
Replace Waste Toner Bottle It is time to replace the waste
toner bottle.
Replace the waste toner bottle
with a new one.
See page 134 "Replacing the
Waste Toner Bottle".
Tnr Set Error: # The indicated print cartridge is
not installed correctly, or not
installed.
Install the indicated print
cartridge correctly.
The error message appears
even though the print cartridge
is installed correctly.
Using a dry cloth, carefully
wipe the interface area on the
print cartridge surface.
Fusing Unit Setting Error The fusing unit is not installed or
not installed correctly.
Install the fusing unit correctly.
Waste Tnr Bottle Setting Error The waste toner bottle is not
installed or not installed
correctly.
Install the waste toner bottle
correctly.
If the error message appears
even though the waste toner
bottle is attached correctly,
contact your service
representative.
Service call SCXXX There is a problem with the
printer's controller.
Turn off the main power, and
then turn it on again.
If the error occurs again,
contact your sales or service
representative.
Density Sensor Require
Cleaning
Color registration failed. Clean the toner density sensor.
See page 142 "Cleaning the
Toner Density Sensor".
• The message about intermediate transfer unit, fusing unit, and transfer roller appear only for the
Type 2 model.
Error & Status Messages on the Control Panel
175
![](/img.php?id=2134301&img=bgb2.png)
Panel Indicator
The following table explains the meaning of the various indicator patterns that the printer alerts to users
about its conditions.
Indicator patterns Cause
The Alert indicator is lit. The printer cannot be used normally. Check the
error on the control panel.
The Alert indicator is flashing in yellow. Toner has nearly run out.
The Data In indicator is flashing. The printer is receiving print data from a
computer.
The Data In indicator is lit. There is data to be printed.
The Power indicator is lit. The printer is ready for use.
7. Troubleshooting
176
![](/img.php?id=2134301&img=bgb3.png)
8. Appendix
Functions and Network Settings Available in
an IPv6 Environment
The functions and network settings of this machine that are available in an IPv6 environment differ from
those available in an IPv4 environment. Make sure the functions you use are supported in an IPv6
environment, and then configure the necessary network settings.
For details about specifying the IPv6 settings, see page 92 "Host Interface Menu".
Available Functions
FTP Printing
Prints documents via FTP using the EPRT and EPSV commands. An FTP client that complies with RFC
2428 (an IPv6-capable operating system and IPv6-capable FTP application) is required to use
these commands.
Printer
Prints documents using the printer driver.
Web Image Monitor
Allows you to check the machine's status and configure its settings using a Web browser.
Configuration Page
Prints a configuration page that shows you the machine's configuration, IP address, and other
details.
177
![](/img.php?id=2134301&img=bgb4.png)
Transmission Using IPsec
For securer communications, this machine supports the IPsec protocol. When applied, IPsec encrypts
data packets at the network layer using shared key encryption. The machine uses encryption key
exchange to create a shared key for both sender and receiver. To achieve even higher security, you can
also renew the shared key on a validity period basis.
• IPsec is not applied to data obtained through DHCP, DNS, or WINS.
• IPsec compatible operating systems are Windows XP SP2, Windows Vista/7, Windows Server
2003/2003 R2/2008/2008 R2, Mac OS X 10.6 and later, Red Hat Enterprise Linux WS 4.0,
and Solaris 10. However, some setting items are not supported depending on the operating
system. Make sure the IPsec settings you specify are consistent with the operating system's IPsec
settings.
• If you cannot access Web Image Monitor due to IPsec configuration problems, disable IPsec under
[Host Interface] on the control panel, and then access Web Image Monitor.
• For details about specifying the IPsec settings using Web Image Monitor, see page 101
"Configuring the Machine Using Web Image Monitor".
• For details about disabling IPsec using the control panel, see page 92 "Host Interface Menu".
Encryption and Authentication by IPsec
IPsec consists of two main functions: the encryption function, which ensures the confidentiality of data,
and the authentication function, which verifies the sender of the data and the data's integrity. This
machine's IPsec function supports two security protocols: the ESP protocol, which enables both of the
IPsec functions at the same time, and the AH protocol, which enables only the authentication function.
ESP Protocol
The ESP protocol provides secure transmission through both encryption and authentication. This
protocol does not provide header authentication.
• For successful encryption, both the sender and receiver must specify the same encryption
algorithm and encryption key. The encryption algorithm and encryption key are specified
automatically.
• For successful authentication, the sender and receiver must specify the same authentication
algorithm and authentication key. The authentication algorithm and authentication key are
specified automatically.
8. Appendix
178
![](/img.php?id=2134301&img=bgb5.png)
AH Protocol
The AH protocol provides secure transmission through authentication of packets only, including
headers.
• For successful authentication, the sender and receiver must specify the same authentication
algorithm and authentication key. The authentication algorithm and authentication key are
specified automatically.
AH Protocol + ESP Protocol
When combined, the ESP and AH protocols provide secure transmission through both encryption
and authentication. These protocols provide header authentication.
• For successful encryption, both the sender and receiver must specify the same encryption
algorithm and encryption key. The encryption algorithm and encryption key are specified
automatically.
• For successful authentication, the sender and receiver must specify the same authentication
algorithm and authentication key. The authentication algorithm and authentication key are
specified automatically.
• Some operating systems use the term "Compliance" in place of "Authentication".
Security Association
This machine uses encryption key exchange as the key setting method. With this method, agreements
such as the IPsec algorithm and key must be specified for both sender and receiver. Such agreements
form what is known as an SA (Security Association). IPsec communication is possible only if the
receiver's and sender's SA settings are identical.
The SA settings are auto configured on both parties' machines. However, before the IPsec SA can be
established, the ISAKMP SA (Phase 1) settings must be auto configured. When this is done, the IPsec SA
(Phase 2) settings, which allow actual IPsec transmission, will be auto configured.
Also, for further security, the SA can be periodically auto updated by applying a validity period (time
limit) for its settings. This machine only supports IKEv1 for encryption key exchange.
Multiple settings can be configured in the SA.
Settings 1-10
You can configure ten separate sets of SA details (such as different shared keys and IPsec
algorithms).
IPsec policies are searched through one by one, starting at [No.1].
Transmission Using IPsec
179
![](/img.php?id=2134301&img=bgb6.png)
Encryption Key Exchange Settings Configuration Flow
This section explains the procedure for specifying encryption key exchange settings.
Machine PC
1. Set the IPsec settings on Web Image Monitor. 1. Set the same IPsec settings as the machine on
PC.
2. Enable IPsec settings. 2. Enable IPsec settings.
3. Confirm IPsec transmission.
• After configuring IPsec, you can use "ping" command to check if the connection is established
correctly. Because the response is slow during initial key exchange, it may take some time to
confirm that transmission has been established.
• If you cannot access Web Image Monitor due to IPsec configuration problems, disable IPsec on
the control panel, and then access Web Image Monitor.
• For details about disabling IPsec using the control panel, see page 92 "Host Interface Menu".
Specifying Encryption Key Exchange Settings
• [IPsec Settings] appears only if the administrator password has been configured.
Specify it using Web Image Monitor.
1. Start the Web browser, and access the machine by entering its IP address.
2. Click [IPsec Settings].
3. Click the [IPsec Policy List] tab.
4. Select the number of the setting you want to modify in the list, and then click [Change].
5. Modify the IPsec related settings as necessary.
6. Enter the administrator password, and then click [Apply].
7. Click the [IPsec Global Settings] tab, and then select [Active] in [IPsec Function].
8. If necessary, specify [Default Policy], [Broadcast and Multicast Bypass], and [All ICMP
Bypass] also.
9. Enter the administrator password, and then click [Apply].
8. Appendix
180
![](/img.php?id=2134301&img=bgb7.png)
Specifying IPsec Settings on the Computer
Specify exactly the same settings for IPsec SA settings on your computer as are specified for the IPsec
Settings on the machine. Setting methods differ according to the computer's operating system. The
following procedure is based on Windows 7 in an IPv4 environment as an example.
1. On the [Start] menu, click [Control Panel], [System and Security], and then click
[Administrative Tools].
2. Double-click [Local Security Policy], and then click [IP Security Policies on Local
Computer].
3. In the "Action" menu, click [Create IP Security Policy...].
The IP Security Policy Wizard appears.
4. Click [Next].
5. Enter a security policy name in "Name", and then click [Next].
6. Clear the "Activate the default response rule (earlier versions of Windows only)." check
box, and then click [Next].
7. Select "Edit properties", and then click [Finish].
8. In the "General" tab, click [Settings...].
9. In "Authenticate and generate a new key after every", enter the same validity period (in
minutes) that is specified on the machine in [IKE Life Time], and then click [Methods...].
10. Confirm that the Encryption Algorithm ("Encryption"), Hash Algorithm ("Integrity"), and
IKE Diffie-Hellman Group ("Diffie-Hellman Group") settings in "Security method
preference order" all match those specified on the machine in [IKE Settings].
If the settings are not displayed, click [Add...].
11. Click [OK] twice.
12. Click [Add...] in the "Rules" tab.
The Security Rule Wizard appears.
13. Click [Next].
14. Select "This rule does not specify a tunnel", and then click [Next].
15. Select the type of network for IPsec, and then click [Next].
16. Click [Add...] in the IP Filter List.
17. In [Name], enter an IP Filter name, and then click [Add...].
The IP Filter Wizard appears.
18. Click [Next].
Transmission Using IPsec
181
![](/img.php?id=2134301&img=bgb8.png)
19. In [Description:], enter a name or a detailed explanation of the IP filter, and then click
[Next].
You may click [Next] and proceed to the next step without entering any information in this field.
20. Select "My IP Address" in "Source address", and then click [Next].
21. Select "A specific IP Address or Subnet" in "Destination address", enter the machine's IP
address, and then click [Next].
22. For the IPsec protocol type, select "Any", and then click [Next].
23. Click [Finish], and then click [OK].
24. Select the IP filter that you have just created, and then click [Next].
25. Click [Add...] in the Filter Action.
The Filter Action Wizard appears.
26. Click [Next].
27. In [Name], enter a Filter Action name, and then click [Next].
28. Select "Negotiate security", and then click [Next].
29. Select one of options for computers allowed to communicate with, and then click [Next].
30. Select "Custom" and click [Settings...].
31. When [ESP] is selected for the machine in [Security Protocol] under [IPsec Settings], select
[Data integrity and encryption (ESP)], and configure the following settings:
Set the value of [Integrity algorithm] to the same value as the [Authentication Algorithm for ESP]
specified on the machine.
Set the value of [Encryption algorithm] to the same value as the [Encryption Algorithm for ESP]
specified on the machine.
32. When [AH] is selected for the machine in [Security Protocol] under [IPsec Settings], select
[Data and address integrity without encryption (AH)], and configure the following
settings:
Set the value of [Integrity algorithm] to the same value as the [Authentication Algorithm for AH]
specified on the machine.
Clear the [Data integrity and encryption (ESP)] check box.
33. When [ESP&AH] is selected for the machine in [Security Protocol] under [IPsec Settings],
select [Data and address integrity without encryption (AH)], and configure the following
settings:
Set the value of [Integrity algorithm] under [Data and address integrity without encryption (AH)] to
the same value as [Authentication Algorithm for AH] specified on the machine.
Set the value of [Encryption algorithm] under [Data integrity and encryption (ESP)] to the same
value as [Encryption Algorithm for ESP] specified on the machine.
8. Appendix
182
![](/img.php?id=2134301&img=bgb9.png)
34. In the Session key settings, select "Generate a new key every", and enter the same
validity period (in [Seconds] or [Kbytes]) as that specified for [Life Time] on the machine.
35. Click [OK], and then click [Next].
36. Click [Finish].
If you are using IPv6 under Windows Vista or a newer version of Windows, you must repeat this
procedure from Step 12 and specify ICMPv6 as an exception. When you reach Step 22, select
[58] as the protocol number for the "Other" target protocol type, and then set [Negotiate security]
to [Permit].
37. Select the filter action that you have just created, and then click [Next].
38. Select one of options for an authentication method, and then click [Next].
39. Click [Finish], and then click [OK] twice.
The new IP security policy (IPsec settings) is specified.
40. Select the security policy that you have just created, right click on it, and then click
[Assign].
IPsec settings on the computer are enabled.
• To disable the computer's IPsec settings, select the security policy, right click, and then click [Un-
assign].
Enabling and Disabling IPsec Using the Control Panel
1. Press the [Menu] key.
2. Press the [ ] or [ ] key to select [Host Interface], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Network Setting], and then press the [OK] key.
4. Press the [ ] or [ ] key to select [IPsec], and then press the [OK] key.
5. Press the [ ] or [ ] key to select [Active] or [Inactive], and then press the [OK] key.
6. Press the [Menu] key to return to the initial screen.
Transmission Using IPsec
183
![](/img.php?id=2134301&img=bgba.png)
Notes About the Toner
• Proper operation cannot be guaranteed if any third-party toner is used.
• Depending on printing conditions, there are cases where the printer cannot print the number of
sheets indicated in the specifications.
• Replace the print cartridge if the printed image suddenly becomes pale or blurred.
• When operating the machine for the first time, use the print cartridge supplied with this machine. If
this cartridge is not initially used, the following problems may occur:
• "Repl Tnr soon: #" will be displayed before the toner runs out.
• "Replace Toner:#" will be displayed when the toner runs out, but instead the printed image
suddenly becomes pale or blurred.
• The lifetime of the photo conductor, which is built into the print cartridge, is taken into account in
displaying "Repl Tnr soon: #". If the photo conductor stops working before the toner runs out, "Repl
Tnr soon: #" may be displayed.
8. Appendix
184
![](/img.php?id=2134301&img=bgbb.png)
Moving and Transporting the Machine
This section provides cautions that you must follow when moving the machine both short and long
distances.
Repack the machine in its original packing materials when moving it over a long distance.
• Be sure to disconnect all cables from the machine before transporting it.
• The machine is a precision piece of machinery. Be sure to handle it carefully when moving it.
• Make sure to move the machine horizontally. Take extra caution when carrying the machine up or
down stairs.
• If Tray 2 is installed, remove it from the machine, and move them separately.
• Do not remove the print cartridge when moving the machine.
• Be sure to hold the machine level while carrying it. To prevent toner from spilling, move the
machine carefully.
1. Be sure to check the following points:
• The power switch is turned off.
• The power cord is unplugged from the wall outlet.
• All other cables are unplugged from the machine.
2. If Tray 2 is installed, remove it.
3. Lift the machine using the inset grips on both sides of the machine, and then move it
horizontally to the place where you want to use it.
4. If you have removed Tray 2, reinstall it.
• To move the machine over a long distance, pack it well and empty all the paper trays. Take care
not to tip or tilt the machine during transit.
• Toner might spill inside the machine if the machine is not kept level during transit.
• For more information about moving the machine, contact your sales or service representative.
Disposal
Ask your sales or service representative for information about correct disposal of this machine.
Moving and Transporting the Machine
185
![](/img.php?id=2134301&img=bgbc.png)
Where to Inquire
Contact your sales or service representative for further information about the topics included in this
manual or to inquire about other topics not included in this manual.
8. Appendix
186
![](/img.php?id=2134301&img=bgbd.png)
Consumables
• Our products are engineered to meet high standards of quality and functionality, and we
recommend that you use only the expendable supplies available at an authorized dealer.
Print Cartridge
Print cartridge Average printable number of pages per cartridge *1
Black Type1:
(mainly Europe and Asia)
• 2,000 pages
(mainly North America)
• 2,300 pages
Type2:
(mainly Europe and Asia)
• 4,500 pages
(mainly North America)
• 4,500 pages, 6,500 pages
Cyan Type1:
(mainly Europe and Asia)
• 1,600 pages
(mainly North America)
• 2,300 pages
Type2:
(mainly Europe and Asia)
• 4,000 pages
(mainly North America)
• 4,000 pages, 6,000 pages
Consumables
187
![](/img.php?id=2134301&img=bgbe.png)
Print cartridge Average printable number of pages per cartridge *1
Magenta Type1:
(mainly Europe and Asia)
• 1,600 pages
(mainly North America)
• 2,300 pages
Type2:
(mainly Europe and Asia)
• 4,000 pages
(mainly North America)
• 4,000 pages, 6,000 pages
Yellow Type1:
(mainly Europe and Asia)
• 1,600 pages
(mainly North America)
• 2,300 pages
Type2:
(mainly Europe and Asia)
• 4,000 pages
(mainly North America)
• 4,000 pages, 6,000 pages
*1 The printable number of pages is based on pages that are compliant with ISO/IEC 19798 and the image
density set as the factory default. ISO/IEC 19798 is an international standard on measurement of printable
pages, set by the International Organization for Standardization.
• If print cartridges are not changed when necessary, printing will become impossible. For easy
replacement, we recommend you purchase and store extra print cartridges.
• The actual number of printable pages varies depending on the image volume and density, number
of pages printed at a time, paper type and paper size used, and environmental conditions such as
temperature and humidity.
• Print cartridges may need to be changed sooner than indicated above due to deterioration over
the period of use.
8. Appendix
188
![](/img.php?id=2134301&img=bgbf.png)
• Print cartridges (consumables) are not covered by warranty. However, if there is a problem,
contact the store where they were purchased.
• When you first use this machine, use the four print cartridges packaged with the machine.
• The supplied print cartridges are good for approximately 1,000 pages.
• This machine routinely performs cleaning and uses toner during this operation to maintain quality.
• To prevent a cleaning malfunction, you may need to replace a print cartridge even if it is not empty.
Waste Toner Bottle
Name Average printable number of pages*1
Waste Toner Bottle SP C220 25,000 pages
*1 A4/Letter 5% test chart, 3 pages per job, printing in 50% black and white/color.
• The actual number of printable pages varies depending on the image volume and density, number
of pages printed at a time, paper type and paper size used, and environmental conditions such as
temperature and humidity.
• If the waste toner bottle is not changed when necessary, printing will become impossible. For easy
replacement, we recommend you purchase and store extra waste toner bottles.
Consumables
189
![](/img.php?id=2134301&img=bgc0.png)
Specifications of the Machine
This section lists the machine's specifications.
General Function Specifications
Configuration
Desktop
Print process
Laser electrostatic transfer
Maximum paper size for printing
Legal (81/2 × 14 inches)
Warm-up time
30 seconds or less (23 °C, 71.6 °F)
Paper sizes
• Standard paper sizes
A4, B5 JIS, A5, A6, Legal (81/2 × 14 inches), Letter (81/2 × 11 inches), Half Letter (51/2 ×
81/2 inches), Executive (71/4 × 101/2 inches), 8 × 13 inches, B6 JIS, 81/2 × 13 inches,
Folio (81/4 × 13 inches), 16K (195 × 267 mm), Com10 (41/8 × 91/2 inches), Monarch
(37/8 × 71/2 inches), C5 Env (162 × 229 mm), C6 Env (114 × 162 mm), DL Env (110 ×
220 mm)
• Custom size
90 to 216 mm (3.54 to 8.5 inches) in width, 148 to 356 mm (5.83 to 14.0 inches) in length
• Duplex supported paper sizes
A4, B5 JIS, Legal (81/2 × 14 inches), Letter (81/2 × 11 inches), Executive (71/4 × 101/2
inches), 81/2 × 13 inches, Folio (81/4 × 13 inches ), 8 inches × 13 inches, 16K (195 × 267
mm)
Paper type
Thin Paper
Plain Paper
Middle Thick Paper
Thick Paper 1
Thick Paper 2
Recycled Paper
Color Paper
8. Appendix
190
![](/img.php?id=2134301&img=bgc1.png)
Preprinted
Prepunched
Letterhead
Bond Paper
Cardstock
Label Paper
Envelope
Paper output capacity (80 g/m2, 20 lb)
150 sheets
Paper input capacity (80 g/m2, 20 lb)
• Tray 1
250 sheets
• Tray 2 (option)
500 sheets
• Bypass tray
One sheet
Memory
128 MB
Power requirements
• (mainly Europe and Asia)
220-240 V, 6 A, 50/60 Hz
• (mainly North America)
120-127 V, 11 A, 60 Hz
Power consumption
• Maximum power consumption
1300 W or less
• Energy Saver mode 1
80 W or less
• Energy Saver mode 2
(mainly Europe and Asia)
3.8 W or less
(mainly North America)
2.7 W or less
Specifications of the Machine
191
![](/img.php?id=2134301&img=bgc2.png)
The power level when the main switch is turned off and the power cord is plugged into an
outlet: 1W or less.
*Recovery time and power consumption may differ depending on the conditions and environment
of the machine.
Machine dimensions (Width × Depth × Height)
400 × 450 × 320 mm (15.8 × 17.8 × 12.8 inches) or less
Weight (machine body with consumables)
23.8 kg (52.5 lb.) or less
Printer Function Specifications
Printing speed
Black and white: 20 pages per minute (A4), 21 pages per minute (Letter)
Color: 20 pages per minute (A4), 21 pages per minute (Letter)
Resolution
600 × 600 dpi
First print speed
14 seconds or less (A4/Letter, 600 × 600 dpi)
Interface
• Ethernet (10BASE-T, 100BASE-TX)
• Wi-Fi
• USB2.0
• USB2.0 Host
Printer language
PCL6, PCL5c, PostScript3, PictBridge
Fonts
80 fonts
Network protocol
TCP/IP, IPP, Bonjour
8. Appendix
192
![](/img.php?id=2134301&img=bgc3.png)
Specifications of Options
This section lists the specifications of the various options.
Paper Feed Unit TK1010
Paper capacity
500 sheets
Paper size
A4, Letter (81/2 × 11 inches)
Dimensions (Width × Depth × Height)
400 × 450 × 127 mm (15.8 × 17.8 × 5 inches)
Paper weight
60 to 105 g/m2 (16 to 28 lb.)
Weight
Less than 4 kg (8.9 lb.)
Specifications of Options
193
![](/img.php?id=2134301&img=bgc4.png)
Copyright Information about Installed
Applications
expat
Copyright (c) 1998, 1999, 2000 Thai Open Source Software Centre, Ltd. and Clark Cooper.
Copyright (c) 2001, 2002 Expat maintainers.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
associated documentation files (the "Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the
following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial
portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Iperf
Copyright (c) The Board of Trustees of the University of Illinois
All Rights Reserved.
Iperf performance test
Mark Gates
Ajay Tirumala
Jim Ferguson
Jon Dugan
Feng Qin
Kevin Gibbs
John Estabrook
National Laboratory for Applied Network Research
National Center for Supercomputing Applications
8. Appendix
194
![](/img.php?id=2134301&img=bgc5.png)
University of Illinois at Urbana-Champaign
http://www.ncsa.uiuc.edu
Permission is hereby granted, free of charge, to any person obtaining a copy of this software (Iperf) and
associated documentation files (the "Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the
following conditions:
• Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimers.
• Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
the following disclaimers in the documentation and/or other materials provided with the
distribution.
• Neither the names of the University of Illinois, NCSA, nor the names of its contributors may be used
to endorse or promote products derived from this Software without specific prior written permission.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
CONTIBUTORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT
OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
WPA Supplicant
Copyright (c) 2003-2011, Jouni Malinen <j@w1.fi> and contributors All Rights Reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and /or other materials provided with the distribution.
3. Neither the name (s) of the above-listed copyright holder (s) nor the names of its contributors may be
used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
Copyright Information about Installed Applications
195
![](/img.php?id=2134301&img=bgc6.png)
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
8. Appendix
196
![](/img.php?id=2134301&img=bgc7.png)
Trademarks
Bonjour, Mac OS, and Safari are trademarks of Apple Inc., registered in the U.S. and other countries.
Firefox is a registered trademark of the Mozilla Foundation.
Java is a registered trademark of Oracle and/or its affiliates.
LINUX is the registered trademark of Linus Torvalds in the U.S. and other countries.
Microsoft, Windows, Windows Server, Windows Vista, and Internet Explorer are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
PCL is a registered trademark of Hewlett-Packard Company.
PostScript is a registered trademark or trademark of Adobe Systems Incorporated in the United States
and/or other countries.
Red Hat is a registered trademark of Red Hat, Inc.
Other product names used herein are for identification purposes only and might be trademarks of their
respective companies. We disclaim any and all rights to those marks.
PictBridge is a trademark.
The proper name of Internet Explorer 6 is Microsoft® Internet Explorer® 6.
The proper names of the Windows operating systems are as follows:
• The product names of Windows XP are as follows:
Microsoft® Windows® XP Professional
Microsoft® Windows® XP Home Edition
Microsoft® Windows® XP Professional x64 Edition
• The product names of Windows Vista are as follows:
Microsoft® Windows Vista® Ultimate
Microsoft® Windows Vista® Business
Microsoft® Windows Vista® Home Premium
Microsoft® Windows Vista® Home Basic
Microsoft® Windows Vista® Enterprise
• The product names of Windows 7 are as follows:
Microsoft® Windows® 7 Starter
Microsoft® Windows® 7 Home Premium
Microsoft® Windows® 7 Professional
Microsoft® Windows® 7 Ultimate
Microsoft® Windows® 7 Enterprise
• The product names of Windows 8 are as follows:
Trademarks
197
![](/img.php?id=2134301&img=bgc8.png)
Microsoft® Windows® 8
Microsoft® Windows® 8 Pro
Microsoft® Windows® 8 Enterprise
• The product names of Windows Server 2003 are as follows:
Microsoft® Windows Server® 2003 Standard Edition
Microsoft® Windows Server® 2003 Enterprise Edition
Microsoft® Windows Server® 2003 Web Edition
Microsoft® Windows Server® 2003 Datacenter Edition
• The product names of Windows Server 2003 R2 are as follows:
Microsoft® Windows Server® 2003 R2 Standard Edition
Microsoft® Windows Server® 2003 R2 Enterprise Edition
Microsoft® Windows Server® 2003 R2 Datacenter Edition
• The product names of Windows Server 2008 are as follows:
Microsoft® Windows Server® 2008 Foundation
Microsoft® Windows Server® 2008 Standard
Microsoft® Windows Server® 2008 Enterprise
Microsoft® Windows Server® 2008 Datacenter
Microsoft® Windows Server® 2008 for Itanium-based Systems
Microsoft® Windows® Web Server 2008
Microsoft® Windows® HPC Server 2008
• The product names of Windows Server 2008 R2 are as follows:
Microsoft® Windows Server® 2008 R2 Foundation
Microsoft® Windows Server® 2008 R2 Standard
Microsoft® Windows Server® 2008 R2 Enterprise
Microsoft® Windows Server® 2008 R2 Datacenter
Microsoft® Windows Server® 2008 R2 for Itanium-based Systems
Microsoft® Windows® Web Server R2 2008
Microsoft® Windows® HPC Server R2 2008
• The product names of Windows Server 2012 are as follows:
Microsoft® Windows Server® 2012 Foundation
Microsoft® Windows Server® 2012 Essentials
Microsoft® Windows Server® 2012 Standard
Microsoft® Windows Server® 2012 Datacenter
8. Appendix
198
![](/img.php?id=2134301&img=bgc9.png)
INDEX
A
Administrator password..................................8, 126
Administrator settings..........................................126
Attaching Paper Feed Unit TK1010.................... 25
Authentication......................................................178
Auto e-mail notification settings......................... 116
B
B&W print priority............................................... 111
Backup settings....................................................126
Basic operation......................................................65
Bond paper............................................................44
Bypass tray....................................................58, 108
Bypass tray setting priority................................. 108
C
Cardstock...............................................................44
Cleaning.................................... 141, 142, 144, 147
Color paper........................................................... 44
Community...........................................................117
Confidential document..........................................69
Configuration page.............................................125
Consumables.......................................................187
Control panel.........................................................21
Copyright information.........................................194
Counter information............................................ 105
D
Default settings.................................................... 126
DHCP............................................................... 29, 31
Differences in functions between different models8
Digital camera....................................................... 73
Direct printing........................................................ 73
Disclaimer.................................................................7
DNS setting..........................................................115
Duplex..................................................................107
E
E-mail notification 1............................................ 116
E-mail notification 2............................................ 116
Economy Color Prints..........................................106
Encryption............................................................178
Encryption key exchange................................... 180
Energy saver mode.......................................14, 128
Envelope..........................................................44, 59
Error messages.................................................... 172
expat.................................................................... 194
Extending tray 1.................................................... 56
Exterior................................................................... 17
F
Fusing Unit........................................................... 140
G
General status..................................................... 113
H
Host Interface.........................................................92
I
I/O timeout..........................................................111
IKE settings...........................................................121
Important safety instructions...........................11, 13
Installing the machine............................................22
Interior.................................................................... 20
Intermediate transfer unit.................................... 140
Introduction.............................................................. 7
Iperf...................................................................... 194
IPsec global settings............................................121
IPsec policy settings.............................................121
IPsec settings........................................................121
IPsec transmission................................................178
IPv6 configuration............................................... 114
IPv6 environment.................................................177
J
Job cancel..............................................................65
L
Label paper............................................................44
Language...................................................... 99, 103
Legal prohibition......................................................7
Letterhead.............................................................. 44
List of option............................................................. 9
List/Test Print..........................................................86
Lists....................................................................... 125
Loading paper....................................................... 54
Locked Print............................................................69
199
![](/img.php?id=2134301&img=bgca.png)
M
Machine information...........................................107
Maintenance Menu...............................................88
Maintenance page............................................. 125
Manual IP address..........................................30, 32
mDNS setting.......................................................114
Menu chart.............................................................82
Messages.............................................................172
Middle Thick paper...............................................44
Models................................................................... 10
Moving.................................................................185
N
Network application...........................................114
Network print setting...........................................114
Network settings..................................................113
Network status.....................................................113
Non-recommended paper................................... 51
Notes....................................................................184
O
Operation tools..................................................... 28
Options................................................................ 193
P
Page counter........................................................105
Paper Feed Unit TK1010.............................25, 193
Paper Input Menu..................................................83
Paper jam.................................. 151, 152, 154, 156
Paper mismatch..................................................... 67
Paper size...............................................................61
Paper tray............................................................ 104
Paper type....................................................... 44, 61
PCL Menu...............................................................96
PCL6..................................................................... 128
PictBridge.................................................. 73, 74, 75
Plain paper.............................................................44
POP3 settings.......................................................118
Preprinted paper................................................... 44
Prepunched paper.................................................44
Print area................................................................52
Print cartridge..............................................129, 187
Print counter.........................................................105
Print functions......................................................... 77
Print output functions..............................................78
Print quality functions.............................................77
Printer function.....................................................192
Priority tray...........................................................109
PS Menu.................................................................98
R
Recycled paper..................................................... 44
Replacing the Fusing Unit and Transfer Rollor..140
Replacing the intermediate transfer unit............ 140
Reports................................................................. 125
Reset settings........................................................126
Restore settings.................................................... 127
Restrict user function...............................37, 40, 112
S
SA (Security Association)................................... 179
SMTP settings.......................................................118
SNMP settings..................................................... 117
Specifications..............................................190, 192
Status information................................................104
Status messages.................................................. 172
Supported paper...................................................41
System.................................................................. 117
System information..............................................104
System Menu......................................................... 89
System settings.....................................................108
T
TCP/IP status....................................................... 113
Thick paper 1.........................................................44
Thick paper 2.........................................................44
Thin paper..............................................................44
Toner...................................................104, 129, 184
Top page............................................................. 102
Trademarks.......................................................... 197
Transfer Rollor..................................................... 140
Trap...................................................................... 117
Tray 1..................................................................... 54
Tray 1 priority......................................................109
Tray 2............................................................ 54, 108
Tray paper settings..............................................108
Troubleshooting......... 75, 157, 158, 161, 164, 172
Type name................................................................8
200
![](/img.php?id=2134301&img=bgcb.png)
U
User code...............................................................40
User restriction......................................................... 8
W
Waste toner bottle...............................................134
Web Image Monitor...........................................101
Where to put the machine.................................... 22
Wireless LAN settings......................................... 119
Wireless LAN setup...............................................34
Wireless settings..................................................119
WPA Supplicant..................................................195
201
![](/img.php?id=2134301&img=bgcc.png)
MEMO
202
![](/img.php?id=2134301&img=bgcd.png)
MEMO
203
![](/img.php?id=2134301&img=bgce.png)
MEMO
204 EN
GB
EN
US
M200-8611
![](/img.php?id=2134301&img=bgd0.png)
EN
GB
EN
US
M200-8611 © 2013