Ricoh WLRW54G2 Option for Radiocommunications User Manual 1

Ricoh Company Ltd Option(s) for Radiocommunications 1

User Manual 1

• Confirm that the Gigabit Ethernet board was correctly installed by printing the configuration page. Ifit is correctly installed, "Gigabit Ethernet & USB 2.0" will appear for "Device Connection" on theconfiguration page.• If the board was not installed properly, repeat the procedure from step 2. If it cannot be installedcorrectly even after reattempting installation, contact your sales or service representative.• For details about printing the configuration page, see "Test Printing", Quick Installation Guide.• Before using the Gigabit Ethernet board, you must configure settings from the printer control panel.For details, see "Ethernet Configuration".• p.59 "Ethernet Configuration"Installing the Wireless LAN Interface Board• Do not touch inside the controller board compartment. Doing so may cause a machine malfunctionor a burn.• Before beginning work, ground yourself by touching something metal to discharge any staticelectricity. Static electricity can damage the unit.• Do not subject the unit to physical shocks.1. Check the contents of the package.BFL301S2. Turn off the power, and then unplug the power cable.2. Installing Options422R-WL54C1N/ R-WL54C1GNSetting Manual for end product
3. Loosen the two screws and remove the cover of the Wireless LAN interface board installationunit.BFL055SThe removed cover is not used when installing the interface board.4. Fully insert the Wireless LAN interface board.BFL058S5. Tighten the two screws to secure the interface board.Check the Wireless LAN interface board is connected firmly to the controller board.• Confirm that the interface board was correctly installed by printing the configuration page. If it iscorrectly installed, "Wireless LAN" will appear for "Device Connection" on the configuration page.• If the board was not installed properly, repeat the procedure from step 2. If it cannot be installedcorrectly even after reattempting installation, contact your sales or service representative.• For details about printing the configuration page, see "Test Printing", Quick Installation Guide.• Before using the Wireless LAN interface board, you must configure settings from the printer controlpanel. For details, see "Wireless LAN Configuration".• p.70 "Wireless LAN Configuration"Installing the Interface Units432

Navigation menu