RIDER BEST QS-10603 BLUETOOTH SPEAKER User Manual 1

Rider best,Inc BLUETOOTH SPEAKER 1

User manual

1.Stylish fashionable and elegant appearance2.Strong bass,clear ang rich vocal3.Music playing through BT,USB,SD and line in connection2Panel FunctionDIGITAL AUDIO PLAYERMODELED0+2+4+6+8+100+2+4+6+8+10-2-4-6-8-10-2-4-6-8-10MASTER EQUALIZATIONPOWER M IXE R 5-WAY PROFESSIO NAL SPEA KER100H z 50 0Hz 1KHz 4KHz 1 0K HzAUX INP UTLRONOFFONOFFPOWER LIGHTSAC INPUTAC12 0V 60HzANTRe mo teMODEL:QS-J1502MADE IN CHINA    JS1. Source Volume Control2. Treble Control 3. BASS Control 4. Echo Control 5. Mic Volume Control6. Mic Input Jacks7. Power ON/OFF Switch8. USB Function Display10. EQ adjustment11. USB/SD/FM/BT Playback Controls      a.MODE      b.Previous/CH- Button      c.Next/CH+ Button      d.Play/Pause/FM SCAN Button   9. USB/SD Input port12.Receiving Head1234567891011USBSDMP3AUXFMMHZ121314. Aux input13. Lights ON/OFF Switch15. Fan cooling air outlet14151616. FM antenna1717. AC Voltage Input:   120V-60HzLight Flashing Alternatively After Power On3Function DescriptionGeneral Function Description1.Master Volume :Turnning to adjust master volume.2.Treble Volume :Turnning to adjust volume.3.Bass Volume :Turnning to adjust volume.4.Echo Effect Volume :Turnning to adjust volume.5.Mic Volume :Turnning to adjust volume.6.mode:change to other mode when operating,sequence:AUX-BLUE-FM-USB/SD.priority to play in usb or micro sd mode when insert usb or micro sdMp3 Function Description1.USB:Playing when insert the USB when save with Mp3 music.2.Micro SD:Playing when insert the Micro SD when save with Mp3 music.3.AUX:Playing when Plug in the AUX cable and connected with music device.4.Play/Pause Button: In USB or Micro SD mode,press to play or pause.5.Skip -&+ Button: With playing music in USB or Micro SD mode,short press   to go back or forwatd music,long press to adjust volumeBT Function Description1.pairing:press Mode Button To Blue Mode ,speaker Will Be Under Automatic Pairing Mode,led Display Shows "blue",pair The Bt Compatible Device By Selecting "QS-J1502" From The Listed Devices, Speaker Wlii Call Out "connected" After Paired Successful, Blue Pairing System Will Be Off There Is No Device Connecting Afrer 5 Minutes.2.Music Playing: press play/pause,Skip +/- Button to play music.5Technical SpecificationsPackingQS-J1502 Speaker                 *1Adpater                                    *1User Manual                            *1PORTABLE ACTIVE SPEAKERSYSTEM WITH TROLLEYQS-J1502BT AUDIO STREAMINGFeatureDisplay Descripation1.                  : USB flashes when playing2.                  : USB pause display3.                  : Read U disk display4.                  : Read SD card displayUSB MP3SD5.                  : FM display when playingFM  MHZ1USBSDMP3AUXFMMHZLighting Function Decription4AC 120V/60Hz15", 4 OHMS3", 4 OHMS100W(Max.)Remote Control FunctionsPORTABLE ACTIVE SPEAKER     SYSTEM WITH TROLLEYQS-J1502
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu