Ringway Tech PA-88W DIGITAL PIANO User Manual

Ringway Tech(Jiangsu) Co.,Ltd. DIGITAL PIANO

User Manual

PA-88WVirgin Musical InstrumentsOwner s Manual
1) Read these instructions.2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Do not use this apparatus near water. 6) Clean only with dry cloth.7) Do not block any ventilation openings; install in accordance with the manufacturer's instructions.8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10) Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11) Only use attachments/accessories specified by the manufacturer.12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over (Figure 1).13) Unplug this apparatus during lightning storms or when unused for a long periods of time.14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.CAUTION: Apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the apparatus.Always make sure all batteries are .Always replace at the same time. Remove the batteries from the instrument if it is not to be used for a long time.WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.inserted the correct way around to match the +/- polarity markingsall of the batteries Do not combine old and new batteries, also do not mix batterytypes, as this can cause overheating, or fire, or battery fluid leakage. (Figure 1)Thank you for purchasing this digital instrument. For correct operation and safety, please read the manual carefully and keep it for future reference. PrecautionSafety PrecautionsImportant Safety InstructionsDO NOT OPENRISK OF ELECTRIC SHOCKCAUTIONThe lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage”within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.The exclamation point within an equilateral triangle is intended to alert the userto the presence of important operating and maintenance (servicing) instructions inthe literature accompanying the product.
Your portable 88 note piano not only contains leading and innovative technology but it also is developed by and for musicians of all playing levels. Featuring a natural balanced, weighted keyboard action and an advanced acousta ridge tone generation sound technology, that will provide you with a rich performing and playing experience. This PA-88W offers many features and connection possibilities.To get the most out of your instrument, please read this manual and try out the various functions that can compliment your playing style. Whether it is on stage, studio or home, your new portable piano is designed to give you a lifetime of musical enjoyment.Features Include:. 88 Key Natural Balanced, weighted Keybed. 12 Acousta Ridge Instrument Voices. DSP Functions for additional realism. USB to Host and USB Audio Connection. MIDI, Stereo and Mono Line Outs. Battery Operated (6 D Cell Batteries are not included). Includes AC Adaptor, Sustain Pedal, Music Rack and more Thank you for choosing Artesia!FCC Statement1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that may cause undesired operation.2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: . Reorient or relocate the receiving antenna. . Increase the separation between the equipment and receiver. . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. . Consult the dealer or an experienced radio/TV technician for help.
13478889111112141516161718202020212324293031ContentsPanel Control Getting Started Selecting a Voice Demo Songs Select the Demo Song the Demo Song Reverb and Chorus Buttons Layer Mode To Adjust the Volume of Main Voice in Layer To Adjust the Volume of the Layer Voice Metronome Tempo Edit Functions Master Tunning Touch EQ Adjustment MIDI Functions MIDI Channels Local On/Off Panic Key Factory Reset Appendix Advanced Function keyboard Chart Specifications ........................................................................... ........................................................................ .................................................................................................................................................. .......................................................... Stop ............................................................ ................................................... ............................................................................. ............................ ................................................................................................................. ................................................................................ .......................................................................... .................................................................... ................................................................................. .................................................................... ....................................................................... ..................................................................... ........................................................................ ............................................................................ ........................................................................... ................................................................................. .............................................. ..........................................................................Warranty .................................................................................
USB TO HOST SUSTAIN LINE OUTPHONESRDC12V 1APOWERL(MONO) LINE OUT DC12V 1AUSB TO HOST SUSTAIN PHONESRPOWERL(MONO)
3Panel ControlMASTER VOLUME2CHORUS Button43REVERB ButtonTEMPO Button65METRONOME Button7VOICES Select9SUATAIN Jack8USB TO HOST JackPOWER 110 LINE OUT(R) JackPOWER Jack1312 PHONES Jack11 LINE OUT(L)(MONO) Jack
4Getting StartedBefore playing turn the power on by pressing the POWER switch, the panel LED will light.POWERIf you don't play the Demo song, don't make any operation, the piano will turn off after 30 minutes. NOTETurn on the powerAuto Power On/OffPress the [METRONOME] and the [TEMPO] buttons together again to exit the Function Mode.FUNCTIONTEMPOMETRONOMEPress the [METRONOME] and the [TEMPO] buttons together to enter the Function Mode.Pressing the C#2 piano key allows the user to switch auto Power On or Off. While holding down the C#2 piano key, play the C3 Key once for Auto Power On and twice for Auto Power Off.TUNINGTOUCH=HIGHAUTO POWER ON/OFFTOUCH=NORMALTOUCH=LOWLOCAL ON/OFFPANICCHANNELTIME SIGMETRO VOLLAYER VOLVOICE VOLC#2
5Set the VolumeInitially set the [VOLUME] about half way between the"MIN" and "MAX" settings. You can adjust the volume to accommodate you play.Using HeadphonesOne standard stereo headphones can be plugged in here for private practice or late-night playing. The internal speaker system is automatically shut off when a pair of headphones is plugged into PHONES jacks.PHONES NOTEIf Default is on, it means the unit will Auto Power Off after 30 minutes if there is no operation, but expect no demo playing.VOLUMEMIN MAXRL(MONO)Using External Sound SystemThe Line Out jack(R) and can be used to deliver the output of the piano to a keyboard amplifier, stereo sound system, mixing console or tape recorder.Line Out jack(L)(MONO)LINE OUTUsing USB-MIDIThis piano allows the transfer of MIDI over USB. There is a specific way in which the MIDI signals are routed for maximum flexibility. In a standard Digital Piano, the built-in keyboard sends MIDI signals to the internal sound bank as well as the 5-pin MIDI output. In this digital piano, the keyboard not only sends MIDI signals to the internal sound bank (just like normal) but also sends MIDI signals simultaneously to theinternal MIDI connection which hooks up inside the device to the Audio Interface. It is the Audio Interface that is used to control the USB-MIDI.USB TO HOST
Using DC Power JackConnection for the included DC power adapter. Please use only the provided adapter.6Using Battery PowerAlways make sure all batteries are .Always replace at the same time. Remove the batteries from the instrument if it is not to be used for a long time.inserted the correct way around to match the +/- polarity markingsall of the batteries Do not combine old and new batteries, also do not mix battery types, as this can cause overheating, or fire, or battery fluid leakage.Sustain Pedal The foot pedal included with your digital piano will cause piano key sounds to decay slowly as if they were being held down. A piano-style pedal may optionally be used. The jack will auto-detect the polarity of the sustain pedal. SUATAINEnsure the piano is turned off before connecting the pedal. Otherwise, it will affect the piano sound. As standard, the pedal will affect the note playing after pressed. To change polarity, hold the foot pedal down during power up.NOTEUSB Audio The PA-88W have USB Audio.This means that you can plug in via a USB Cable to your Laptop, Tablet, iPad, and SmartPhone and be able to hear you device's audio through the pianos speaker system. This is very useful for example when you are recording your piano with your laptop and want to listen back through the pianos speakers. Or if you are using some of the instrument voices on the Garage Band app from your iPad, now you can hear it through the pianos' sound delivery system instead of just the iPad's speakers or headphones.
7Selecting a VoiceGRAND PIANO E.PIANO 1 CHURCH ORGANE.PIANO 2 ROCK ORGANBRIGHT PIANOSTRINGS VIBRAPHONE GUITAR BANKBASS HARPSICHORD CHOIRPress the [BANK] button and the indicator is light, then press voice buttons to select the voice in the second line. NOTEThe piano has 12 built-in voices, which include several pianos as well as other instruments. These digitally-sampled musical instrument sounds may be selected one at a time, layered to produce two voices at once.To select a voice (Main voice), press the appropriate Voice Select button on the right side of the front panel.
8Demo SongsThere are 12 demo songs in the piano. Each demo song will demonstrate a different voice. Here's how you can select and play the demo songs.GRAND PIANO E.PIANO 1 CHURCH ORGANE.PIANO 2 ROCK ORGANBRIGHT PIANOSTRINGS VIBRAPHONE GUITAR BANKBASS HARPSICHORD CHOIRREVERB CHORUSDEMODuring playback, another song may be chosen by pressing a different voice select button. Press the [BANK] button and the LED button then press voice buttons to select the demo song in the second line. light, REVERB CHORUSDEMOTo stop the demo song. Press the again. To replay the current song from the beginning, press the flashing voice select button.[REVERB] button and the [CHORUS] button together Stop the Demo SongThe demo songs may be selected by pressing the [REVERB] and [CHORUS] buttons together simultaneously. The demo starts with the Piano. The [REVERB] button, the [CHORUS] button and voice buttons will flash . Select the Demo Song
9Reverb and Chorus ButtonsTo apply either effect, press either button. The button will light and the effect will be heard when the piano is played.To turn off the effect, press the button of the desired effect again and the LED light will not light. REVERB3. Set the reverb depth by pressing a key on the keyboard to select the value. See the Appendix for the value ranges.C4 C5 C6 C7C3The Reverb and Chorus effects may be applied to each voice individually and will be retained even when the power is turned off.CHORUSSelect the depth of the effects1. Press and hold the effect button.REVERB CHORUS2. While this function is active the LED should blink. You can then release the button and press a key on the keyboard corresponding to the setting you want for the reverb depth. It's possible to change the setting by pressing multiple keys after each other until the right setting is found.
104. Play the keyboard to hear the new setting with the sound selected.[CHORUS]) [CHORUS])5. To exit the [REVERB]( function, press the [REVERB] ( button again.
11Layer ModeIn Layer mode two voices may be played simultaneously, each at selected volumes.To enter Layer mode, press and hold the button to select the MAIN sound, then press the button for LAYER sound, and release. Both the button LEDwill light while layered. GRAND PIANO E.PIANO 1 CHURCH ORGANE.PIANO 2 ROCK ORGANBRIGHT PIANOSTRINGS VIBRAPHONE GUITAR BANKBASS HARPSICHORD CHOIR To layer two sounds in different banks, press and hold simultaniously the voice button required in the first bank and the bank button. The bank button LED will flash and the first voice button will be lit. Once the bank button is flashing can remove your hands from the buttons. Next, select the layered button from the second bank by pressing the corresponding button. Once selected this button will blink to indicate its from the second bank while the instrument from the first bank stays lit. If two voices in the first and second bank, but on the same button are selected, the buttons should merely blink. These can also be layered by double-pressing the button in which case again the button will blink. GRAND PIANO E.PIANO 1 CHURCH ORGANE.PIANO 2 ROCK ORGANBRIGHT PIANOSTRINGS VIBRAPHONE GUITAR BANKBASS HARPSICHORD CHOIRFUNCTIONTEMPOMETRONOMETo Adjust the of Volume Main Voice in Layer Press the [METRONOME] and the [TEMPO] buttons together to enter Edit ModeThe LEDs for both buttons will become lit.，To turn Layer Mode off, select a single voice button and the other Voice will be turned off.
12#Press the (D 0) key activates the voice volume menu. The volume can be changed in 88 note steps from 0-127 where C7=127 and A-1=0. To exit the Voice Volume function, press the [METRONOME] and [TEMPO] buttons at the same time again.The volume can be changed in 88 note steps from 0-127 where C7=127 and A-1=0. Pressing a key will play C3 of the currently selected voice sound at the volume corresponding to the key value.C4 C5 C6 C7FUNCTIONTEMPOMETRONOMETo Adjust the Volume of the Layer Voice Press the [METRONOME] button and the [TEMPO] button to enter Edit Mode.Pressing C#0 activates the voice volume menu. TUNINGTOUCH=HIGHTOUCH=NORMALTOUCH=LOWLOCAL ON/OFFPANICCHANNELTIME SIGMETRO VOLLAYER VOLVOICE VOL#C0AUTO POWER ON/OFF
C4 C5 C6 C7 Press the [METRONOME] and the [TEMPO] again to exit Edit mode.13Press a key will play C3 of the currently selected layered sound at the volume corresponding to the key value.TUNINGTOUCH=HIGHTOUCH=NORMALTOUCH=LOWLOCAL ON/OFFPANICCHANNELTIME SIGMETRO VOLLAYER VOLVOICE VOL#D0AUTO POWER ON/OFF
MetronomePress the metronome button to turn the metronome on.FUNCTIONTEMPOMETRONOMEMetronome VolumePress the [METRONOME] and [TEMPO] buttons together to enter edit mode.Pressing F#0 activates the metronome volume menu. the volume can be changed in 88 note steps from 0-127 where C7=127 and A-1=0. Pressing a key will play the metronome sound at the volume corresponding to the key value.14Press the [METRONOME ] again to exit Edit Mode. and the [TEMPO] buttonsPressing the [METRONOME] and the [TEMPO] buttons allows the user to change the time signature for the metronome. When this menu is selected the metronome starts playing at the current tempo setting. Pressing G#0 toggles through the time signature options starting with the current setting. Default is 4/4 and the following options are available to toggle through: 2/4, 3/4, 4/4, 5/4, 6/8, 9/8, 12/8.Changing the Time SignatureWhen the Metronome button is activated its LED will light and you will hear the click in the headphones or through the speakers.TUNINGTOUCH=HIGHTOUCH=NORMALTOUCH=LOWLOCAL ON/OFFPANICCHANNELTIME SIGMETRO VOLLAYER VOLVOICE VOL#F0AUTO POWER ON/OFFTOUCH=HIGHTUNINGTOUCH=HIGHTOUCH=NORMALTOUCH=LOWLOCAL ON/OFFPANICCHANNELTIME SIGMETRO VOLLAYER VOLVOICE VOL#G0AUTO POWER ON/OFF
TempoFUNCTIONTEMPOMETRONOMEThe tempo of the metronome may range from 20 to 280 beats per minute (BPM). 15To change the tempo, press and hold the button for 3 seconds to changethe setting. The LED will blink to the current tempo speed. If the Metronomeis off, no sound will be heard.Press a key on the keyboard to select a tempo. The LED will blink to thenew value. It is possible to make multiple changes and see the LED tempochange as the keys are pressed.To exit, press the tempo button. The LED will stop blinking and not light.See Appendix for the value ranges .Tempo defaults to 120 but settings are retained when the power is turned off. For example 120BPM is the C3 piano key.
Edit FunctionsPlease refer to pages 14 and 11 for information about editing the Metronome and Layer functions.The piano is tuned to A440 when the power is turned on and does not require tuning. However, if desired, the tuning may be adjusted in small increments from -50 to +50 cents (one semitone).Master TuningFunction Key AssignmentsTo change the Master Tuning:Press the [METRONOME] and [TEMPO] button together to enter Edit Mode.In Edit Mode the keys on the keyboard are used for selecting the Function to be edited. To enter Edit Mode, press the Metronome and Tempo buttons at the same time.16FUNCTIONTEMPOMETRONOME#Press the Tunning key A -1 to select the Master Tuning Function. The keyboard will now play middle C piano 1 voice (C3) on every note across the keyboard. #Playing C3=C3. Pressing any key downwards to A -1 will play C3 but change the tuning setting proportionately to tune down by a whole semi tone. TUNINGTOUCH=HIGHTOUCH=NORMALTOUCH=LOWLOCAL ON/OFFPANICCHANNELTIME SIGMETRO VOLLAYER VOLVOICE VOLAUTO POWER ON/OFFTUNINGTOUCH=HIGHTOUCH=NORMALTOUCH=LOWLOCAL ON/OFFPANICCHANNELTIME SIGMETRO VOLLAYER VOLVOICE VOL#-1AAUTO POWER ON/OFF
Touch C4 C5 C6 C717Press the [METRONOME ] and the [TEMPO] buttons again to exit Edit Mode. Pressing any key from C3 and up will play the c3 note but at tuning settings proportionately so that its possible tune up by a whole semi tone. The user will use his ears to determine the correct tuning setting.FUNCTIONTEMPOMETRONOMEThe Touch Select function allows the choice of 3 keyboard sensitivity settings for different playing styles: Low Sensitivity, Normal Sensitivity and High Sensitivity. This affects the volume of the piano as you play the keys. To Set the Keyboard SensitivityPress the uttons together to enter the Edit mode.[METRONOME ] and the [TEMPO] bPress the desired Touch Select key ( , G , A ) to select between Low, Normal and High velocity curves. When selecting F#1 low, Piano 1 C3 will play at velocity value 30. When G#1 Normal is selected, Piano 1 C3 will play at velocity value 70. When A#1 High is selected, Piano 1 C3 will play at velocity value 127 and the piano will exit Function Mode automatically.###F1 1 1TUNINGTOUCH=HIGHTOUCH=NORMALTOUCH=LOWLOCAL ON/OFFPANICCHANNELTIME SIGMETRO VOLLAYER VOLVOICE VOLLowSensitivityNormalSensitivityHighSensitivityAUTO POWER ON/OFF
18EQ AdjustmentTo change the sound of your piano's amplifier you can adjust the EQ to add more Bass or to remove some of the Treble.To Change the Bass Response1. Press the [METRONOME] and [TEMPO] Buttons together to enter the Function Edit mode.#2. Press the A5 piano key activates the Bass EQ Function The Bass EQ can be changed by pressing white piano keys only from the A-1 piano key to D3 piano key. Pressing the F1 Piano Key sets the Bass EQ to its center point EQ Setting. Pressing the A-1 Piano Key will reduce the Bass response by 12dB. Pressing the D3 Piano Key therefore increases the Bass response by 12 dB. For Example to set the Bass EQ setting to 10 dB you would press the B2 white piano key. To set the BASS EQ to -8 dB you would press the E0 piano key. For the Keyboard Chart of the piano key numbers and listings please page 29 of the Advanced Keyboard Functions.4. Press the [METRONOME] and [TEMPO] Buttons together again to exit the Function Mode. Then play the lower half of the piano to hear the bass response increase for the changes that you have made in the Bass EQ settings. To change the Treble Response1. Press the [METRONOME] and [TEMPO] Buttons together to enter the Function Edit Mode.#2. Press the C 6 piano key activates the Treble EQ Function. C4 C5 C7C6BASS EQ#A5
3. The Treble EQ can be changed by pressing white piano keys only from the A-1 piano key to D3 piano key. Pressing the F1 Piano Key sets the Treble EQ to its center point EQ Setting. Pressing the A-1 Piano Key will reduce the Treble response by 12dB. Pressing the D3 Piano Key therefore increases the Treble response by 12 dB. For Example to set the Treble EQ setting to 10 dB you would press the B2 white piano key. To set the Treble EQ to -8 dB you would press the E0 piano key. For the Keyboard Chart of the piano key numbers and listings please page 29 of the Advanced Keyboard Functions. 4. Press the [METRONOME] and [TEMPO] Buttons together again to exit the Function mode.Then play the keyboard in the upper half of the piano keys to test the changes that you made in the TREBLE EQ Setting.To set the piano to its Default Settings press and hold the [REVERB] and [CHORUS] buttons while turning the piano's power switch on. Bass and Treble EQ settings will be stored in the pianos memory and the latest setting will be used when the piano is powered up again. NOTE19C4 C5 C7C6TREBLE EQ#C6
MIDI FunctionsMIDI Channels20Local On/OffTurning the Local On/Off function to Off will disconnect the keyboard from the internal sound engine of this piano. This means you can use the piano as a MIDI controller to control other MIDI devices (or virtual instrument software running on MIDI Out channel values range from 1 to 16.To change the MIDI Out Channel Value: While in the Edit Mode press the key the amount of times that correspond to the MIDI Out Channel that you desire.The MIDI Out Channel Value is identified by the amount of times that the C3 Piano Note is sounded.The default MIDI Out channel is 1. For example: When you press piano key one time in edit mode, you will hear one note C3 sound to indicate that current MIDI Out channel is 1.If you press The piano key 9 times in a row while still in the Edit Mode you will hear the C3 Note being played back 10 times to denote that the new MIDI Out channel is 10.#A0#A0#A0TUNINGTOUCH=HIGHTOUCH=NORMALTOUCH=LOWLOCAL ON/OFFPANICCHANNELTIME SIGMETRO VOLLAYER VOLVOICE VOL#A0AUTO POWER ON/OFF
21FUNCTIONTEMPOMETRONOMEPress the [METRONOME] and the [TEMPO] Buttons together to enter the edit mode.Press the [METRONOME] and the [TEMPO] Buttons again to exit the edit mode.your computer) without playing the internal sounds of this piano. You may also find other occasions (such as when you are using MIDI sequencing software on your computer) where it is useful to turn Local off.MIDI Panic Key“”“”“”Pressing the Panic key will send out a Reset All Controllers and All Notes Off MIDI Message on ALL MIDI Channels 1 - 16. This can be especially useful for clearing stuck notes when controlling external MIDI devices or software. “”“”To use the Panic key to send out a Reset All Controllers and All Notes Off MIDI Message on ALL MIDI Channels 1 - 16:Press the to enter Edit Mode. [METRONOME] and [TEMPO] button together Press the Local On/Off key (D 1) to switch local on or off. When the D 1 key is first pressed the current setting is confirmed by playing the C3 piano key once for on and twice for off. If you press the D 1 key again you will need to re-enter your desired settings.# ## TUNINGTOUCH=HIGHTOUCH=NORMALTOUCH=LOWLOCAL ON/OFFPANICCHANNELTIME SIGMETRO VOLLAYER VOLVOICE VOL#D1AUTO POWER ON/OFF
Press the Panic Key ( ) allows the user to activate Panic, which send out general MIDI reset messages such as all note off, etc. Once Panic reset has been completed, Piano will automatically exit Edit mode.#C122TUNINGTOUCH=HIGHTOUCH=NORMALTOUCH=LOWLOCAL ON/OFFPANICCHANNELTIME SIGMETRO VOLLAYER VOLVOICE VOL#C1AUTO POWER ON/OFF
1. Turn the Power Off.2. Hold down the [REVERB] and the [CHORUS] buttons while powering on the piano.All LEDs on the device will light while these buttons are held down. Once this has happened, you can release the [REVERB] and [CHORUS] buttons.When the [REVERB] and the [CHORUS] buttons are released, this piano will return to Performance Mode (ready-to-play). All button LEDs will returnto their defaultstates. This piano will then function normally and as if powered on for the first time.Performing a Factory Reset will clear all battery backed memory and restore all functions to their factory defaults, just like they were when you used this piano for the first time.REVERB CHORUSDEMOFactory Reset23
MIDI Implementation Chart1-161-16Mode 3 NoNo0~127 Yes Yes No NoNo 0,1,5,6,7,10,11,32,64,65,66,67,80,81,91,93,100,101,121 0-11Yes* No No NoNoNo F u n c t i o n T r a n s m i t t e d R e c o g n i z e d R e m a r k s Basic Channel Mode Note Number Velocity Note After Touch Pitch Bend Program Change System Real Time Notes 1-16 1-16 Mode 3 Yes ******** 0~127 ******** Yes Yes No No No 0-127 0-127******** Yes* No No No No No 12*The controller will recognizeand respond to GM Device inquiries.Master Tune supported.Master Volume supported.DefaultChangedDefaultMessages Altered True voice Note ONNote OFFKey'sChannels True # Song Position Pointer Song SelectTune RequestClockCommands All Sounds Off* Reset All Controllers Local ON/OFF* ALL Notes OFF Active Sensing System ResetControl Change System ExclusiveSystem CommonAux Messages *Up to 3 channelssimultaneously* The controllerwill respondto GM, but notpiano voices.MIDI Channel ModesOMNI ONOMNI OFFMode1Mode2Mode3Mode4MONO ONPOLY OFFAppendix Yes Yes Yes Yes No NoYes Yes YesYesYesYes 24
Parameter adjusting instructions25Voice Vol Temp oChorus Vol Reverb Vol Metro. Vol Layer Vol A-1A#-1B-1C0C#0D0D#0E0F0F#0G0G#0A0A#0B0C1C#1D1D#1E1F1F#1G1G#10246810121416182022242628303234363840424446According to choose corresponding key chart shown below, to set the desired values.0246810121416182022242628303234363840424446024681012141618202224262830323436384042444602468101214161820222426283032343638404244460246810121416182022242628303234363840424446202428323640444852566062646668707274768082848688
Voice Vol Temp oChorus Vol Reverb Vol Metro. Vol Layer Vol A1A#1B1C2C#2D2D#2E2F2F#2G2G#2A2A#2B2C3C#3D3D#3E3F3F#3G3G#3A3A#3B3C44850525456586062646668707274767880818283848586878889909190929496981001021041061081101121141161181201221241261281301321341361381401421444850525456586062646668707274767880818283848586878889909148505254565860626466687072747678808182838485868788899091485052545658606264666870727476788081828384858687888990914850525456586062646668707274767880818283848586878889909126
Voice Vol Temp oChorus Vol Reverb Vol Metro. Vol Layer Vol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
Voice Vol TempoChorus Vol Reverb Vol Metro. Vol Layer Vol F6F#6G6G#6A6A#6B6C7120121122123124125126127120121122123124125126127120121122123124125126127120121122123124125126127120121122123124125126127235240245250255260270280Note:X: No value available for this particular Edit Function on this key.Resetting Value:Tune VoiceVol TempoChannelLocalMetro.Vol LayerVol Factory Default 0127 100 100 1120ONVoice Select1(GrandPiano)28AutoPowerOffOFF
Advanced Functions Keyboard Chart29C4 C5 C7C6BASS EQTREBLE EQC0 C1 C2 C3TOUCH=HIGHAUTO POWER ON/OFFTOUCH=NORMALTOUCH=LOWLOCAL ON/OFFPANICCHANNELTIME SIGMETRO VOLLAYER VOLVOICE VOLTUNINGC0 C1 C2 C3 C4 C5 C6 C7 BASS EQTREBLE EQTOUCH=HIGHTOUCH=NORMALTOUCH=LOWLOCAL ON/OFFPANICCHANNELTIME SIGMETRO VOLLAYER VOLVOICE VOLTUNINGAUTO POWER ON/OFF
Specifications3088 weighted velocity-sensitive keys12Layer, Layer level, Keyboard sensitivity, Tuning On/off, Level, Time signatureSustainReverb, Chorus, Bass EQ, Treble EQ12Channels 1-16, Local On/Off; USB Audio USB To Host, , Line Out L/R, Phones, DC PowerPedalYDT713 10W/8ohm x 2 YD66 10W/8ohm x 250 x 10.6X7.1 inches,1270mm x 270mm x 180 mm9KgOwner's Manual, Music Rest Speakers: Dimensions(W x D x H) Weight: Supplied Accessories: MIDI & Audio:Connectors: Voice: Polyphony: Voice Control: Metronome: Pedal Response: Demo Songs: Effect: Keyboard:3210505795V1.0
WarrantyThis product, except the exterior cosmetic parts, is warranted to the originalpurchaser to be free from defects in material and workmanship under normaluse as follows:1. For a period of one year from the date of purchase, Virgin MusicalInstrument Company will pay the labor charges to repair the defectiveproduct. After this one year period, you must pay all labor charges.2. In addition, Virgin Musical Instrument Company will supply, at nocharge, new or rebuilt replacements for defective parts for a period ofone year from the date of purchase.In the event repairs are needed, the original purchaser should contactVirgin Musical Instrument Company, the parent company of Artesia Pianos,at 888-998-9848. Virgin Musical Instrument Company will then repairthe product or return it to the VMI distribution center for repairs. Uponcompletion of the repair, the unit will be returned to the music store, freightprepaid.This warranty will not apply to this product if it has been misused, abused,or altered. Without limiting the foregoing, bending, dropping of unit, or visiblecracks and/or scratches are presumed to be defects resulting from misuse orabuse.This warranty is void if the product has been opened.Neither this warranty nor any other warranty expressed or implied, includingimplied warranties of merchantable, shall extend beyond the warrantyperiod.No responsibility is assumed for any incidental or consequential damages.Outside the US contact the original retailer where the product waspurchased for additional warranty details.31
FCC STATEMENT1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that may cause undesired operation.2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Virgin Musical Instrument Company IncP O Box 2908La Mesa, CA 91943PH: 619 244-0006E-mail: info@virginmusicalinstruments.comwww.virginmusicalinstruments.com

Navigation menu