Riso Kagaku RFOM5A2 RF Module (RFID Tag-Reader/Writer) User Manual SS 9 User s Manual2 2

Download:
Mirror Download [FCC.gov]
Document ID	2089889
Application ID	njlxe5YoKXatEgoU3dwWcg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.2kB (152503 bits)
Date Submitted	2013-10-17 00:00:00
Date Available	2014-04-14 00:00:00
Creation Date	2013-10-08 18:03:24
Producing Software	Acrobat Distiller 10.1.8 (Windows)
Document Lastmod	2013-10-08 18:03:24
Document Title	Microsoft Word - SS 9 User’s Manual2-2.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	020042

RF-MODULE-V5
(Model: 444-59008)
User’s Manual
Ver. 2.2
Riso Kagaku Corporation
This manual describes the use, the functions and the performance of the Radio
Frequency Identification System RF-MODULE-V5. The system is so
manufactured that it can not be repaired or replaced by the user; and therefore,
if there are such needs, please contact Riso Kagaku Corporation or its agent. No
service work should be started before the service person has read this manual.
Features
This product uses radio frequency of 13.56 MHz to communicate with the tags;
thus, it should conform to any relative laws and regulations of the country or
the region. Authorization of the module or the printer into which the module is
installed may be required in some countries or regions.
Cautions
1. Use or store this product on the temperature and humidity conditions
mentioned below, so as to maintain its operational reliability.
2. Use or store this product in an environment free of explosive gases,
inflammable gases, corrosive gases, oils, organic solvents, dust, salt and
metal powders.
3. Keep this product free of direct shock, strong vibration or sunshine.
4. To communicate with the tags, this product uses 13.56 MHz radio frequency,
which may be interfered by radio waves (noises) emitted from a transceiver,
a motor, a monitor, a power supply (including a power supply IC), etc.
Please make sure that such interferences will not occur before using the
product in a place near to these devices.
5. Take proper measures to avoid any possible electrostatic discharge to the
product, which may damage the product.
6. After doing the wiring, make sure the connectors are fastened properly.
Warning
Do not alter any part of the product.
Alteration of the printed wiring board, the antennas or the connecting cables of
the module may damage the control board of the printer, and is an illegal act if
it causes the modular transmitter emissions out of the limits provided by laws
or regulations.
Specifications
Dimensions
Transmitting Frequency
Transmission field strength
Less than φ32mm×18mm
13.56 MHz
Less than 500 μV/m at 3m
Operating Temperature
Storage Temperature
Operating Humidity
Supply voltage
0 to +40 oC
-20 to +60 oC
25 to 85% RH (Without condensation)
5 V dc +/- 10%
Discarding the Product
The product should be discarded as normal printed wiring boards. If you do
not know how such boards should be discarded, ask Riso Kagaku Corporation,
its agent or the government.
Notice about the law and the standard
FCC ID: RPARFOM5A2
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
The user is cautioned that unauthorized changes or modifications not approved
could void the user's authority to operate the equipment.
Canada IC: 4819A-RFOM5A2
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit
accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en
compromettre le fonctionnement.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : 020042
Create Date                     : 2013:10:08 18:03:24+09:00
Modify Date                     : 2013:10:08 18:03:24+09:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 10.1.8 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - SS 9 User’s Manual2-2.doc
Creator                         : 020042
Document ID                     : uuid:b4a4cbb5-a28e-41b9-aba7-a6a4a90b2c19
Instance ID                     : uuid:48516bb0-22f0-48ec-8f2f-eb267031b714
Page Count                      : 3

EXIF Metadata provided by EXIF.tools