Ritetemp 8029B Owner S Manual 1

2014-07-06

: Ritetemp Ritetemp-8029B-Owner-S-Manual ritetemp-8029b-owner-s-manual ritetemp pdf

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadRitetemp Ritetemp-8029B-Owner-S-Manual 1
Open PDF In BrowserView PDF
Operation 8029B
Farenheit/Celcius
indicator

Temperature
Display

TEMP
UP button

ROOM TEMP

T
HEA

Current Temperature
Display

MP
M TE
ROO
FAN
OFF

T
HEA

PG

1

TEMP
DOWN button

RESET
button

L
COO

AUTO

ON

TARGET

TEMP

SET Temperature
Display

Fan
Switch

HEAT/COOL
Mode Switch

Statement of use: The 8029B can be used with most 24
volt gas, oil or electric heating and air conditioning systems,
single-stage heat pumps or gas millivolt heating systems. It
cannot be used with 120 volt heating systems or
multistage heat pumps.

1 Configure
Set HEAT/COOL mode switch to HEAT or COOL. The unit will display the ambient
temperature. Set the Fan switch to automatic.

2 Set Temp
Press the TEMP UP and TEMP DOWN buttons to select the desired temperature.
The SET icon will be displayed with your desired temperature. ( The display will return to
the current temperature in 5 sec if no button is pressed).

3 Operate

PG

2

Your thermostat is now in operation.
In the winter, set the system switch to HEAT to control your heating system.
In the summer, set the system switch to COOL to control your air conditioner.
In spring and fall or when windows are open, you can set the system switch OFF.
Setting the FAN switch to AUTO automatically runs your system's fan during heating and
cooling.
Setting the FAN switch to ON runs your system's fan continuously even without heating
or cooling.

4 Special Features
0

0

F / C Select

Centigrade / Fahrenheit selection. The C/F jumper is on the back of the
thermostat control unit it determines which temperature system is
displayed on the LCD display.
To change the F / C jumper. Separate the control unit from the wall
mounted terminals. Locate the F / C jumper .
Select the desired display mode.
Replace the control unit on the wall and press RESET.
0

0

0

PG

3

0

Low Battery
When the batteries are low, the battery icon will come on and flash.
The two AA Batteries in the unit need to be replaced. In some
installations your heater system will stop functioning when the thermostat
loses power. Replace batteries as soon as you see this warning. The
thermostat setting will remain for 30 seconds while the batteries are
removed and replaced.

Rear View of Unit

AA
OPEN F
SHORT C

AA
ADJ RM TEMP

OFF ON

GAS
ELECT

Calibration
switch

PG

4

Gas/Electric jumper
Customer Support: 888-515-2585
Visit our webiste www.ritetemp-thermostats.com

Fahrenheit
/Celsius jumper
307-008
Source Exif Data: 
File Type                       : AI
File Type Extension             : ai
MIME Type                       : application/vnd.adobe.illustrator
PDF Version                     : 1.4
Linearized                      : Yes
Create Date                     : 2004:08:27 08:10:30-07:00
Creator                         : Adobe Illustrator 9.0.1
Modify Date                     : 2004:08:27 08:51:31-07:00
For                             : Bill Sexton, William M. Sexton
Bounding Box                    : 96 136 516 651
Creator Version                 : 9
Container Version               : 9
Page Count                      : 2
Creation Date                   : 2004:08:27 08:10:30-07:00
Producer                        : Adobe PDF library 4.800
Mod Date                        : 2004:08:27 08:51:31-07:00
Metadata Date                   : 2004:08:27 08:51:31-07:00
Title                           : 1.PDF
Image Height                    : 515
Image Width                     : 420
Image Size                      : 420x515
Megapixels                      : 0.216
EXIF Metadata provided by EXIF.tools

Navigation menu