Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3417360 |
| Application ID | eJ8xbq7dgTrlM0JkrAxAVw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 19.53kB (244148 bits) |
| Date Submitted | 2017-06-07 00:00:00 |
| Date Available | 2017-06-07 00:00:00 |
| Creation Date | 2017-04-18 13:16:23 |
| Producing Software | Acrobat Distiller 11.0 (Windows) |
| Document Lastmod | 2017-06-02 20:37:02 |
| Document Title | Microsoft Word - RMBU_3GTR_FCC documents Signed.doc 的文件 |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | PCUser |
Roambee Sensor Bee User Manual March 2017 Beginning to use the Roambee Sensor Bee The Roambee Sensor Bee includes a standard Micro USB connector, which is located on the side of the device under a rubber plug (fig.1). Figure 1 We recommend charging the Roambee battery before using the device for the first time. It takes about 4 hours to fully charge the battery. You can use any approved Micro USB charger. Access and Control The Roambee Sensor Bee works in conjunction with the Roambee Portal. The location and sensor information from the Bee will be transmitted to the Roambee Portal through the cellular modem. The Roambee portal has multiple features that enable the management of the sensor bee. Users in the portal have the ability to locate a bee and change the configuration of the bee. Configuration The Sensor Bee has two basic modes: Transmitting and Sleeping. Transmitting occurs during fixed reporting intervals which can be configured within the portal. The transmission time can vary from between 5 minutes and 24 hours. When the Sensor bee is not transmitting it is still monitoring the sensors and recording the sensor data. Safety The Roambee Sensor Bee is a radio transmitting device. Always adhere to local laws and regulations. Switch off the Roambee Sensor Bee in places where the use of cellular phones is not permitted or where it can create interference, for example near medical equipment that can be affected by radio interference and at blasting sites. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in an installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by Increasing the separation between the equipment and transmitter. FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example ‐ use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. When carrying the product or using it while close your body, either use an accessory such as a holster or otherwise maintain a distance of 20 cm from the body to ensure compliance with RF exposure requirements. All wireless devices are sensitive to interference, which can impair the functionality of the device. In principle the Roambee Sensor Bee is water resistant, as long as the rubber plug covering the USB port is tightly closed. If fastened e.g. to a shipment, exposure to limited moisture will not affect the electronics. Do not immerse the sensor in water The device is designed to be used at temperatures between ‐20°C – +40°C. Coldness may impair the battery capacity. Do not subject the device to great temperature variation to prevent condensation from forming inside the device. The device includes an integrated rechargeable battery, which cannot be removed. You should not dispose of the device with commercial waste. Instead, return it to the place of purchase or to a recycling point. You can check the location of the nearest recycling point from the local waste management authorities. Do not attempt to remove or modify the battery, as this may damage the device and create a hazard. Only use standard undamaged chargers equipped with a Micro USB connector. Avoid using excessive force when plugging the connector into the charging port.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : PCUser Create Date : 2017:04:18 13:16:23+08:00 Modify Date : 2017:06:02 20:37:02+08:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2017:06:02 20:37:02+08:00 Format : application/pdf Title : Microsoft Word - RMBU_3GTR_FCC documents Signed.doc 的文件 Creator : PCUser Producer : Acrobat Distiller 11.0 (Windows) Document ID : uuid:264019fe-787f-4fca-89c0-05172ac1ac51 Instance ID : uuid:47d767dd-776d-42aa-83c5-73365e691083 Page Count : 4EXIF Metadata provided by EXIF.tools