Robert Bosch Car Multimedia 52R0 Car radio & infotainment system User Manual Part 4

Robert Bosch Car Multimedia GmbH Car radio & infotainment system Users Manual Part 4

Users Manual_Part 4

en | 357.2 Calling up the audio/video dis-playWhile you are playing media: fTap the Listen area in the Home menu.7.3 Audio playbackNote:The control options that are available depend on the current audio source: fBluetooth® devices may employ communication protocols that do not support all control options. fNo control options are available for AUX playback.7.3.1 The audio display31 32333435363738You will find the following information and con-trols in the audio display:Note:The information that is available depends on the current audio source: fInformation on MP3 tracks must be stored as ID3 tags on the audio source. fBluetooth® devices may employ communication protocols that do not provide all the track informa-tion. fNo track or playback information is available with AUX playback.O Current playback sourceP Title information areaQ button: Skip to next title/fast forwardR button: Pause playback When playback is paused: button: Resume playbackS Playback progress barT button: Skip to previous title/rewindU button: Shuffle functionV button: Repeat functionThe title information area P provides informa-tion on the current track, audiobook or podcast, for instance: fArtist fTitle fAlbumThe playback progress bar S displays the playback position in the current title and the elapsed and total playing time of the title.7.3.2 Pausing playback fTap R.Playback is paused. fTap R.Playback resumes.7.3.3 Skipping to the next/previous title fTap Q or T.The next or previous title is played.7.3.4 Selecting titles in the media browser fTap the title information area P.The media browser opens. For further details on this, please read the section entitled “Media browser” (page 37).7.3.5 Fast forward/rewind fTouch and hold Q or T until you reach the desired position.Or: fTouch the playback progress bar S and swipe left or right along the bar to alter the position in the title continuously.Playing media
36 | en7.3.6 Skipping forwards/back-wards in the current title fTap the desired position in the playback progress bar S.7.3.7 Repeat function fTap the toggle button V to switch between Repeat off, Repeat track and Repeat selec-tion. – Repeat track : Repeat the current title – Repeat selection : Repeat the current playback category (e.g. album, artist, folder) – Repeat off : Deactivate the repeat function7.3.8 Shuffle function fTap the toggle button U to switch between Shuffle off and Shuffle selection. – Shuffle selection : Shuffle the tracks in the current playback category (e.g. album, artist, folder) – Shuffle off : Deactivate the shuffle function7.4 Video playbackSafety noticeThe displaying of video images is only possible while the vehicle’s parking brake is applied. As soon as the park-ing brake is released, the video image of a running video file or external DVD is hidden and the following notification appears in the display: “For your safety, the video is off while the vehicle is in motion.” Playback of the video file or external DVD continues, and the audio output can still be heard.Note:No control options are available when playing an external DVD.7.4.1 The video display39 404142434445You will find the following information and con-trols in the video display:W Current playback sourceX Picture areaY button: Skip to next titleZ button: Pause playback When playback is paused: button: Resume playback[ button: Skip to previous title\ Playback progress bar] button: Open media browserThe picture area X provides information on the current title: fTitle (not for an external DVD) fNumber of the current title / of the current episode (not for an external DVD)The playback progress bar \ displays the playback position in the current title and the elapsed and total playing time of the title (not for an external DVD).Note:In full-screen mode, the symbol appears in the picture area when play-back is paused.7.4.2 Pausing playback fTap Z.Playing media
en | 37Playback is paused. fTap Z.Playback resumes.7.4.3 Skipping to the next/previous title fTap Y or [.The next or previous title is played.7.4.4 Selecting titles in the media browser fTap ].The media browser opens. For further details on this, please read the section entitled “Media browser” (page 37).7.4.5 Fast forward/rewind fTouch and hold Y or [ until you reach the desired position.Or: fTouch the playback progress bar \ and swipe left or right along the bar to alter the position in the title continuously.7.4.6 Skipping forwards/back-wards in the current title fTap the desired position in the playback progress bar \.7.4.7 Full-screen mode – on/offTo switch between the video display and full-screen mode, ftap the picture area X.7.5 Media browserUsing the media browser you can select audio and video titles for playback.7.5.1 The browser display47 4846515049You will find the following information and con-trols in the browser display:a button: Close media browserb Browse mode indicationc Main categories (here: Folder)d Subcategories (here: Folders)e up button: Return to parent categoryf Titles/filesIn the browser display you can select media according to various categories, such as artist, album or genre. The main categories are: fTitle: Select a title from all the available titles. All titles of the media source are subsequently played. fArtist: Select a title from all of the artist’s titles or from one of the artist’s albums. Only the titles of the artist or album are subsequently played. fAlbum: Select a title from an available album. Only the titles of the album are subsequently played. fGenre: Select a title from an album of the genre or from the album of a particular artist. Only the titles of the album are subsequently played. fFolder: Choose a title in the folder structure of the media source. Only the titles contained in the same folder are subsequently played. fPlaylist: Choose a title in a playlist. Only the titles contained in the same playlist are subse-quently played.Playing media
38 | en fAudiobook: Select a chapter from an available audio-book. Only the chapters of the selected audiobook are subsequently played. fPodcast: Select an episode from an available podcast. Only the episodes of the selected podcast are subsequently played. fVideo: Select an episode from an available video. Only the episodes of the selected video are subsequently played.7.5.2 Selecting titles fTap the desired main category c.The corresponding list items are displayed.Note:To scroll through the main categories, touch the tab row. fTap the desired subcategory, if applicable d.Notes: fTo scroll through list items, touch the list area and swipe up or down. fA subcategory can contain further subcategories.To return to a parent category, tap up e. fTap the desired title f.Playback begins.Note:To display the respective media dis-play, tap a.7.5.3 Closing the browser without selecting a title fTap a.The current media display is displayed.8 NavigationNote:This function is only available if the device is equipped with a navigation system.If your device is not equipped with a navigation system you may be able to retrofit the navigation function (see the section entitled “Retrofitting the navi-gation function” (page 55)). Please contact your Suzuki dealer regarding this.Road safety fThe usage of the navigation system does not absolve the driver of the responsibility of a correct and vigi-lant attitude. The relevant traffic regulations must always be fol-lowed. If a navigation instruction contradicts traffic regulations, the traffic regulations always apply. fThe route guidance provided by the device may not be completely accu-rate. Ensure that all driving manoeu-vres are legal and safe in order to avoid accidents. fSome areas – one-way streets, entrances and other pedestrian zones, where vehicle entry is pro-hibited – may not be marked on the Playing media | Navigation
en | 39map. If a navigation instruction contradicts traffic regulations, the traffic regulations always apply.Note:This navigation system calculates the current vehicle position using satellite signals, various vehicle signals, map data, etc. However, an accurate posi-tion may not be shown depending on satellite condition, Road configuration, vehicle condition or other circum-stances.8.1 Starting navigationNote:Ensure that the SD card containing the navigation system’s map data is inserted in the SD card slot 3.The navigation function is only avail-able when the SD card containing the map data is inserted.To open the map view, ftap the Drive area in the Home menu.To open the Destinations menu, ftap the direct-select button in the Home menu.8.2 Entering a destination8.2.1 Opening the Destinations menu fTap the direct-select button in the Home menu.or: fTap in the map view.The Destinations menu is displayed:Note:If a route guidance session is active, the Route menu of the Destinations menu will be displayed. For more details please refer to the section entitled “Route guidance settings in the Route menu” (page 46).Under the New tab, you can specify a new desti-nation. Please refer to the sections “Entering an address” (page 39) and “Selecting a point of interest” (page 41).If you switch to the Previous tab or Favourites tab, you can select a previous destination or a stored favourite as your new destination. Please refer to the section entitled “Selecting one of the previous destinations or a destination stored as a favourite” (page 42).8.2.2 Entering an address fIn the Destinations menu, tap the New tab, if necessary. fTap New address.The Address input menu is displayed.Enter the following address components in this order:1. Country2. City / Postcode3. Street4. Intersection or House numberTo enter an address component, ftap the relevant item.Navigation
40 | enThe keypad is displayed:Note:If the “Lock keypad while driving” setting is enabled, you will only be able to access the keypad while the vehicle is stationary. For further details on this, please read the section entitled “Enabling the keypad lock while driv-ing” (page 54). fEnter the relevant name or number.Note:If necessary, tap ÆØÜ to show the special characters on the keypad.The first suitable match found for what you have entered is displayed above the keypad. fTap OK to select the displayed match.Or: fEnter the first characters of the address component.The number of matches corresponding to the entered characters is displayed beside the symbol. fTap to display the list of matches. fTap the desired match.The Address input menu is displayed. fProceed with the next address component.Note:As soon as you have entered the coun-try and city of your destination, you can start route guidance. You will then automatically be guided to the city centre. fTap to start route guidance.Note:If the entered address is ambiguous, a list of possible destinations is dis-played. fTap the desired item to start route guidance to the respective destina-tion. fTap for an item to view the details for the respective destination before starting route guidance (see the section entitled “Location details view” (page 42)).Or: fTap to view the details for the respective destination and a map of the surrounding area (see the section entitled “Location details view” (page 42)).Note:If the entered address is ambiguous, a list of possible destinations is dis-played. Tap the desired item to view the details for the respective destina-tion. fTap to start route guidance.The system calculates the route to the selected destination.Note:If a route guidance session is already active, you can choose fwhether the current destination or, if applicable, the current waypoint should be replaced by the new destination (see the section entitled “Changing the destination while route guidance is active” (page 44)) or fwhether the new destination should be added to the current route as a waypoint (see the section entitled Navigation
en | 41“Entering a waypoint” (page 44)).8.2.3 Selecting a point of interestMethods for searching for a point of interestThere are 2 methods for searching for a point of interest: fMethod 1: You can search for a point of inter-est that is located in a particular city or post-code area. fMethod 2: You can search for a point of inter-est that is located near your current position.Notes: fYou can use both methods to search for a point of interest stored in the map data or in your own points of interest. fYou will find further information on your own points of interest in the section entitled “Your own points of interest” (page 52).Follow the steps of the desired method as described below and continue reading the sec-tion “Selecting a point of interest and starting route guidance” (page 41). fMethod 1: Point of interest in a city or post-code area: fIn the Destinations menu, tap the New tab. fTap POI search or MyPOI search.The Address input menu is displayed. fEnter a country and a city or postcode for the point of interest, as described in the section entitled “Entering an address” (page 39). fTap POI search.The available point of interest categories are displayed. fMethod 2: Point of interest nearby: fIn the Destinations menu, tap the New tab. fTap POIs nearby or MyPOIs nearby.The available point of interest categories are displayed.Note:Up to 30 available points of interest inside a 150 km radius around your current position are listed.Selecting a point of interest and starting route guidanceThe available points of interest are divided into categories such as Emergency and Automotive. fTap the desired category.Or: fTap All categories to display all of the avail-able points of interest.Notes: fA category may contain further subcategories. For example, the Automotive category is divided into subcategories such as Petrol station and Garage. Keep selecting the desired subcategories until the points of interest are displayed. fYou can also use a search term to find one or more particular points of interest. To do so, tap Search, enter the desired search term and confirm by tapping OK. fTap the desired point of interest.Details about the point of interest and a map of the surrounding area are displayed (see the section entitled “Location details view” (page 42)). fTap to start route guidance.The system calculates the route to the selected destination.Note:If a route guidance session is already active, you can choose fwhether the current destination or, if applicable, the current waypoint should be replaced by the new destination (see the section entitled “Changing the destination while Navigation
42 | enroute guidance is active” (page 44))or fwhether the new destination should be added to the current route as a waypoint (see the section entitled “Entering a waypoint” (page 44)).8.2.4 Entering coordinates fIn the Destinations menu, tap the New tab, if necessary. fTap Geo coordinates.The Enter Geo coordinates menu is displayed. fEnter the coordinates.Notes: fYou can select in which format coordinates are specified (see the section entitled “Selecting the geo coordinate format” (page 55)). fIn order to enter the values of a cordinate, first tap the respective input field. Then enter the value by tapping the respective digit on the numeric keypad. fIf you want to enter coordinates for the southern or eastern hemi-sphere, tap N or W. fIf you enter a wrong digit, you can delete it by tapping . fTap .Details about the location and a map of the surrounding area are displayed (see the section entitled “Location details view” (page 42)). fTap to start route guidance.8.2.5 Selecting one of the previous destinations or a destination stored as a favourite fIn the Destinations menu, tap the Previous tab or Favourites tab.The available destinations are displayed.Note:Under the Favourites tab, you will find your Home address at the top of the list. To specify and store the home address, please read the section enti-tled “Storing the home address” (page 44). fTap the desired destination to start route guidance.Note:Tap for an item to view the details for the respective destination before starting route guidance (see the sec-tion entitled “Location details view” (page 42)).The system calculates the route to the selected destination.Note:If a route guidance session is already active, you can choose fwhether the current destination or, if applicable, the current waypoint should be replaced by the new destination (see the section entitled “Changing the destination while route guidance is active” (page 44)) or fwhether the new destination should be added to the current route as a waypoint (see the section entitled “Entering a waypoint” (page 44)).8.3 Location details viewFor the following locations or destinations you can display a details view: fPoints of interest fPrevious destinations fFavourites fNew destinationsNavigation
en | 438.3.1 Areas of the location details view53 545259 58 5657 55You will find the following information and con-trols in the details view:g Map of the area around the locationh Slideri Address informationj button: Call the stored number (only if a number is stored)k button: Start route guidancel button: Save as favourite If the location is already a favourite: button: Edit the name of the favouritem button: Delete the location (only for previous destinations, favourites or way-points)n button: Delete all locations of the list (either previous destinations, favourites or waypoints)You can adjust the size of the map g and the information area i: fTouch the slider h and swipe left or right.8.3.2 Options in the location details viewIn addition, you have these options available to you (depending on the type of location): fYou can store a location in your favourites. To do so, tap l. Then you have the follow-ing options: – Tap Edit name to edit the name of the new favourite before saving it. – Tap Save with displayed name to save the new favourite without editing the name. – Tap Save as home to store the favourite as the home address (see also the section entitled “Storing the home address” (page 44)).Notes: fIf you want to rename the destina-tion, enter a name for it using the keypad. If necessary, tap ÆØÜ to show the special characters on the keypad. Tap OK to store the destina-tion under the entered name. fIf you want to store the favourite as the home address and a home address is already stored, you are prompted to confirm the replace-ment of the existing home address. fIf all the storage spaces for your favourites are already occupied, a corresponding notification appears and allows you to replace an existing favourite. fIf the location is already a favourite, you can rename the favourite. To do so, tap l and confirm by tapping OK. fA telephone number is stored for some loca-tions. Tap j to call this number.Note:A mobile phone must be connected to the device for this function. fTo delete the displayed location from the list of previous destinations, from your favourites or from the list of waypoints, tap m and confirm by tapping . fTo delete all previous destinations, favourites or waypoints and the final destination of an active route guidance session, tap n and confirm by tapping .Navigation
44 | enNotes: fIf you delete a waypoint, the route is recalculated and displayed in the map view. fIf you delete all waypoints and the final destination, the route guidance session is cancelled. fTo start route guidance from within the details view, tap k.8.4 Storing the home addressYou can store a home address. This address appears at the top of the list of your favourites (see the section entitled “Selecting one of the previous destinations or a destination stored as a favourite” (page 42)).Note:If a home address has already been stored, it will be replaced/overwritten by the new address after confirmation. fIn the Destinations menu, tap the Favourites tab. fTap Home. fTap Current position to store the current position as the home address.Or: fTap Enter address to specify an address. fEnter the address as described in the section entitled “Entering an address” (page 39). fAfter specifying the address, tap Set as home to store the entered address as the home address.8.5 Entering a waypointAs soon as you have started route guidance to a destination, you can enter up to 5 further desti-nations as waypoints.Note:The order in which you enter additional waypoints cannot be changed after-wards. Each waypoint that you add will be placed on the route before the desti-nation. So the last waypoint that you add will be the last waypoint on your route. fEnter the new destination as described in the section entitled “Entering a destination” (page 39).As soon as you tap , the Route guidance is active notification appears. fTap Add as waypoint.The new destination is inserted in the route as a waypoint. The system calculates the route to the waypoint.8.6 Changing the destination while route guidance is activeYou can change the destination or waypoint while route guidance is active. fEnter the new destination as described in the section entitled “Entering a destination” (page 39).As soon as you tap , the Route guidance is active notification appears. fTap Replace destination or Add as way-point.The system calculates the route to the new destination.8.7 Map view and map options8.7.1 Opening the map view fTap the Drive area in the Home menu.or: fTap in the Destinations menu.8.7.2 The map view during an active route guidance sessionAn active route guidance session is displayed in the map view. Driving recommendations are provided in visual form (see below) and as announcements.Navigation

Navigation menu