Robert Bosch Car Multimedia AIVIL42N0 Navigation System with Bluetooth and WLAN User Manual

Robert Bosch Car Multimedia GmbH Navigation System with Bluetooth and WLAN Users Manual

Users Manual

(1,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
Table of Contents
1Introduction
How to use this manual ....... 1-2
Safety information ................... 1-3
Regulatory information ....... 1-4
Trademarks ................................... 1-4
Legal disclaimer ......................... 1-6
Licenses ............................................ 1-7
2Getting started
Control buttons and touch
screen display ............................. 2-2
Starting system ....................... 2-16
Basic operation ....................... 2-16
System settings ...................... 2-23
3Audio system
Audio operation
precautions ................................... 3-2
Names and functions of
audio control buttons ....... 3-10
Audio operations ................... 3-17
Audio settings .......................... 3-40
CD/USB memory device care
and cleaning .............................. 3-41
4Hands-Free Phone
Bluetooth® Hands-Free
Phone System ............................. 4-2
5Information
Information menu .................... 5-2
NissanConnect® Services (if
so equipped) ................................. 5-6
SiriusXM® Travel Link (if so
equipped) ..................................... 5-18
Apple CarPlay
TM
...................... 5-21
Android Auto
TM
....................... 5-23
Siri® Eyes Free .......................... 5-26
6Navigation (if so
equipped)
Safety information ................... 6-3
Navigation screen .................... 6-3
Map operation ............................ 6-5
Setting destination ............... 6-15
Route guidance ....................... 6-31
Viewing traffic
information ................................. 6-45
Storing a
location/route .......................... 6-49
Navigation settings .............. 6-57
General information for navi-
gation system .......................... 6-59
7Voice recognition
Voice recognition ..................... 7-2
8Troubleshooting guide
System unit ................................... 8-2
Audio system ............................... 8-3
Bluetooth® Hands-Free
Phone System .......................... 8-12
Condition:

(2,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

NissanConnect® Services (if

so equipped) .............................. 8-16

Apple CarPlay

...................... 8-17

Android Auto

....................... 8-18

Siri® Eyes Free .......................... 8-20

Navigation (if so

equipped) ..................................... 8-21

Voice recognition .................. 8-28

Condition:

(3,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Condition:

(4,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Foreword

Prologue

AIVINJN1-251BEBC1-23DC-4665-B405-18A0830C57B1

NISSAN CONSUMER AFFAIRS DE-

PARTMENT

AIVINJN1-0A572194-58C0-4CCD-A796-B7907E2D317D

For assistance or inquiries about the

NISSAN Navigation System (if so

equipped), NISSAN warranty, service or

general questions, contact the NISSAN

Consumer Affairs Department at:

For U.S. customers

Nissan North America, Inc.

Consumer Affairs Department

P.O. Box 685003

Franklin, TN 37068-5003

1-800-NISSAN-1

(1-800-647-7261)

For Canadian customers

Nissan Canada Inc.

5290 Orbitor Drive

Mississauga, Ontario L4W 4Z5

1-800-387-0122

FOREWORD

AIVINJN1-801B9B40-26BD-49A7-A3FA-A8D4A5112094

Thank you for purchasing a NISSAN vehi-

cle.

This user’s manual is for NissanConnect®

System and Services featuring Apple Car-

Play

and Android Auto

offered in your

NISSAN vehicle.

Operation instructions for the following

systems are included in this manual.

.Audio

.Hands-Free Phone

.Apple CarPlay

.Android Auto

.NissanConnect® Services

.Navigation

.Voice recognition

.Information and settings viewable on

NissanConnect®

Please read this manual carefully to en-

sure safe operation of NissanConnect®

System.

.Because of possible specification

changes and optional equipment,

some sections of this manual may

not apply to your vehicle.

.All information, specifications and il-

lustrations in this manual are those in

effect at the time of printing. NISSAN

reserves the right to change specifica-

tions or design at any time without

notice.

.Do not remove this manual from the

vehicle when selling this vehicle. The

next user of the system may need the

manual.

Condition:

(5,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
1 Introduction
How to use this manual ............................................................. 1-2
For safe operation .................................................................... 1-2
Reference symbols ................................................................... 1-2
Screen illustrations .................................................................. 1-2
Safety information .......................................................................... 1-3
Regulatory information ............................................................... 1-4
Laser product ............................................................................... 1-4
Bluetooth® devices .................................................................. 1-4
Trademarks .......................................................................................... 1-4
Legal disclaimer ................................................................................ 1-6
Licenses ................................................................................................... 1-7
Software Licenses .................................................................... 1-7
Telematic Control Unit Gen2K ........................................ 1-7
Condition:

(6,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

1. Introduction

HOW TO USE THIS MANUAL

AIVINJN1-D8FFB8FA-A072-42AA-8D6D-9FEA0AD9B6F9

This manual uses special words, symbols,

icons and illustrations organized by func-

tion.

Please refer to the following items and

familiarize yourself with them.

FOR SAFE OPERATION

AIVINJN1-AF356C63-BA5E-4B54-878D-6D8BA7D7E683

WARNING

AIVINJN1-F375076F-362A-4309-A800-D1D6C6376A66

This is used to indicate the presence

of a hazard that could cause death or

serious personal injury. To avoid or

reduce the risk, the procedures must

be followed precisely.

CAUTION

AIVINJN1-FFAF409C-10E2-45AA-BD7F-A8B0005F7083

This is used to indicate the presence

of a hazard that could cause minor or

moderate personal injury or damage

to your vehicle. To avoid or reduce the

risk, the procedures must be followed

carefully.

NOTE:

Indicates items that help you under-

stand and maximize the performance of

your vehicle. If ignored, they may lead to

a malfunction or poor performance.

REFERENCE SYMBOLS

AIVINJN1-A9CE57CF-4F6A-454A-9EF8-91C4E396725F

INFO:

This indicates information that is neces-

sary for efficient use of your vehicle or

accessories.

Reference page:

This indicates the title and page that you

should refer to.

< >:

Indicates a button on the control panel.

[ ]:

This indicates a key/item displayed on the

screen.

Voice Command:

This indicates an operation by voice

command.

SCREEN ILLUSTRATIONS

AIVINJN1-5F699818-FF71-447B-881E-832E1898366B

.The illustrations in this manual are

representatives of various models

and may not be identical with the

design and specifications of your ve-

hicle.

.Icons and menu items displayed on

the screen may be abbreviated or

omitted from the screen illustrations

when appropriate. The omitted icons

and menu items are described as

dotted lines as illustrated.

5GH0782X

Condition:

1-2

(7,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

SAFETY INFORMATION

AIVINJN1-E215E2CD-5877-46AC-B4EF-5D0B6683FCA9

This system is primarily designed to help

you support pleasant driving as outlined

in this manual. However, you, the driver,

must use the system safely and properly.

Information and the availability of services

may not always be up to date. The system

is not a substitute for safe, proper and

legal driving.

Before using the system, please read the

following safety information. Always use

the system as outlined in this manual.

WARNING

AIVINJN1-43837604-6D3B-4A88-95CC-9A1143515BA5

.To operate the system, first park

the vehicle in a safe location and

set the parking brake. Operating

the system while driving can dis-

tract the driver and may result in a

serious accident.

.Exercise extreme caution at all

times so full attention may be

given to vehicle operation. If the

system does not respond immedi-

ately, please be patient and keep

your eyes on the road. Inattentive

driving may lead to a crash result-

ing in serious injuries or death.

.Do not rely on route guidance (if so

equipped) alone. Always be sure

that all driving maneuvers are

legal and safe in order to avoid

accidents.

.Do not disassemble or modify this

system. If you do, it may result in

accidents, fire or electrical shock.

.If you notice any foreign objects in

the system hardware, spill liquid

on the system or notice smoke or a

smell coming from it, stop using

the system immediately and it is

recommended you contact a

NISSAN dealer. Ignoring such con-

ditions may lead to accidents, fire

or electrical shock.

CAUTION

AIVINJN1-CABB1B9E-B526-42ED-BC3A-AF6F2878701B

.Some jurisdictions may have laws

limiting the use of video screens

while driving. Use this system only

where it is legal to do so.

.Extreme temperature conditions

[below −4°F (−20°C) and above

158°F (70°C)] could affect the per-

formance of the system.

.The display screen may break if it

is hit with a hard or sharp object. If

the display screen breaks, do not

touch it. Doing so could result in an

injury.

NOTE:

Do not keep the system running with

the engine or the hybrid system

stopped. Doing so may discharge the

vehicle battery (12V battery). When you

use the system, always keep the engine

or the hybrid system running.

1. Introduction

Condition:

1-3

(8,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

1. Introduction

REGULATORY INFORMATION

AIVINJN1-E1B76219-B24A-4588-A087-0985C8AA0D4C

LASER PRODUCT

AIVINJN1-415B0FE3-387A-46ED-8CD5-D088A6D68506

Complies with 21 CFR 1040.10 and 1040.11

Complies with 21 CFR Chapter 1, Subchap-

ter J

WARNING

AIVINJN1-A0667E60-909D-4DC4-8EE9-D1197E1F8DB1

Use of controls or adjustments or

performance of procedures other

than those specified herein may result

in hazardous radiation exposure.

BLUETOOTH® DEVICES

AIVINJN1-8A5804E2-2DFA-4F0E-BDCA-F37F6A4AFE93

FCC Regulatory information

AIVINJN1-21B88979-0E69-41AF-A95F-076B80E68827

Changes or modifications not expressly

approved by the party responsible for

compliance could void the user’s authority

to operate the equipment.

This device complies with part 15 of the

FCC Rules and Industry Canada license-

exempt RSS standard(s). Operation is

subject to the following two conditions:

(1) This device may not cause harmful

interference, and

(2) this device must accept any interfer-

ence received,

including interference that may cause

undesired operation.

Le présent appareil est conforme aux CNR

d’Industrie Canada applicables aux appa-

reils radio exempts de licence. L’exploita-

tion est autorisée aux deux conditions

suivantes : (1) l’appareil ne doit pas pro-

duire de brouillage, et (2) l’utilisateur de

l’appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage

est susceptible d’en compromettre le

fonctionnement.

TRADEMARKS

AIVINJN1-9FC03AD0-EBF8-481D-A9E5-F229D1F2B583

5GA0258X

5GD0030X

Apple, iPhone®, iPod®, and iPod touch® are

trademarks of Apple Inc., registered in the

U.S. and other countries. Apple CarPlay

is a trademark of Apple Inc. Use of the

Apple CarPlay

logo means that a vehicle

user interface meets Apple performance

standards. Apple is not responsible for the

operation of this vehicle or its compliance

with safety and regulatory standards.

Please note that the use of this product

with iPhone® or iPod® may affect wireless

performance.

5GA0023X

Bluetooth® is a trademark owned by

Bluetooth SIG, Inc. and licensed to Robert

Bosch GmbH.

Condition:

1-4

(9,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

5GA0018X

HD Radio Technology manufactured un-

der license from iBiquity Digital Corpora-

tion. U.S. and Foreign Patents. For patents

see http://dts.com/patents. HD Radio,

Artist Experience, and the HD, HD Radio,

and "ARC" logos are registered trade-

marks or trademarks of iBiquity Digital

Corporation in the United States and/or

other countries.

5GA0017X

NISSAN is offering SiriusXM® services (Sir-

iusXM® Audio, SiriusXM Traffic

, Sir-

iusXM® Travel Link) for free during initial

trial period.

SiriusXM® services require a subscription

after trial period and are sold separately

or as a package. The satellite service is

available only in the 48 contiguous USA

and DC. SiriusXM® satellite service is also

available in Canada; see www.siriusxm.ca.

SiriusXM® Satellite Radio subscription

(Audio Services) is sold separately or as a

package, and is continuous until you call

SiriusXM® to cancel. See SiriusXM® Custo-

mer Agreement for complete terms at

siriusxm.com. For more information, call

Listener Care at 1-877-447-0011 or visit

siriusxm.com.

5GH0156X

SiriusXM® Satellite Radio and SiriusXM

Traffic

subscriptions are sold separately

or as a package, and are continuous until

you call SiriusXM® to cancel. See SiriusXM®

Customer Agreement for complete terms

at www.siriusxm.com. SiriusXM® Travel

Link is available in select markets. For

more information, call Listener Care at 1-

877-447-0011 or visit siriusxm.com/traffic.

5GH0157X

SiriusXM® Satellite Radio and SiriusXM®

Travel Link subscriptions are sold sepa-

rately or as a package, and are continuous

until you call SiriusXM® to cancel. See

SiriusXM® Customer Agreement for com-

plete terms at www.siriusxm.com.

SiriusXM® Travel Link is available in select

markets. For more information, call

Listener Care at 1-877-447-0011 or visit

siriusxm.com/travellink.

App Store

Apple and the Apple logo are trademarks

of Apple Inc., registered in the U.S. and

other countries. App Store is a service

mark of Apple Inc.

Siri®

Siri is a trademark of Apple Inc., registered

in the U.S. and other countries.

Google Play

Google, Google Play are trademarks of

Google Inc.

Google

Google is a trademark of Google Inc.

1. Introduction

Condition:

1-5

(10,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

1. Introduction

LEGAL DISCLAIMER

GUID-A7528BE8-3AB8-4F38-8F5B-B5014F81FD45

WARNING

GUID-23A5D62D-AB8B-4F97-856E-807A0B4B091F

Driving is serious business and re-

quires your full attention. Only use

features and connected devices when

safe and legal to do so. Some features,

including automatic crash notification

and SOS (if so equipped), are depen-

dent upon the telematics device being

in operative condition, its ability to

connect to a wireless network, com-

patible wireless network availability,

navigation map data and GPS satellite

signal receptions, the absence of

which can limit or prevent the ability

to reach the NissanConnect® Services

Data Center and NissanConnect® Ser-

vices Response Center or receive sup-

port. GPS mapping may not be

detailed in all areas or reflect current

road status. Never program GPS while

driving. Only use Remote Engine

Start/Stop (if so equipped) and Re-

mote Horn & Lights (if so equipped)

features in accordance with any laws,

rules or ordinances in effect in your

vehicle’s location.

Feature availability is dependent on vehi-

cle model, trim level, packaging and op-

tions. Compatible connected device may

be required and feature availability may

be dependent on device’s capability. Refer

to connected device’s owner’s manual for

details. Late availability for some features.

Some services and features are provided

by independent companies not within

NISSAN’s control. Should service provider

terminate or restrict service or features,

service or features may be suspended or

terminated without notice or with no

liability to NISSAN or its partners or agents.

Services and features may require com-

patible cellular network provided by in-

dependent companies not within NISSAN

or its partners’ or agents’ control. Cellular

network signal strength may vary and

may not be available in all areas or at all

times. Services and features may not

function if cellular network is unavailable,

restricted, or terminated. NISSAN and its

partners or agents are not responsible for

associated costs or other third party

changes that may be required for con-

tinued operation due to cellular network

unavailability, restriction, or termination

(including equipment replacements/up-

grades, if available, or roaming charges

on alternative networks). Technology is

evolving, and changes by independent

companies are not within NISSAN’s or its

partners’ or agents’ control.

Enrollment, owner consent, personal

identification number (PIN), and subscrip-

tion agreement may be required to re-

ceive full suite of features and services.

Trial periods (if applicable) begin on the

date of vehicle purchase or lease of a new

NISSAN. Trial periods may be subject to

change at any time and may be subject to

early termination without notice. Required

subscriptions may be sold separately for

each available feature or service after trial

period ends, and may continue until you

call service provider to cancel. Installation

costs, one-time activation fee, other fees

and taxes may apply. Fees and program-

ming subject to change. Feature may be

subject to age restrictions in some areas.

Subscriptions governed by service provi-

der’s subscription agreement, terms and

conditions and privacy statements avail-

able at service provider’s website. Text

rates or data usage may apply.

The NISSAN names, logos and slogans are

trademarks owned by or licensed to

Nissan Motor Co. Ltd. or its North Amer-

ican subsidiaries. Other trademarks and

trade names are those of their respective

owners.

For important safety information, system

limitations, and additional operating and

Condition:

1-6

(11,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

feature information, see dealer, owner’s

manual, or www.nissanusa.com/

connect/important-information.

LICENSES

GUID-5FE782B1-F1F2-4C43-B7B0-EE88A41A6D05

SOFTWARE LICENSES

GUID-1E5EA8CA-F06A-4CB9-A570-37F39CE42842

Open Source Software Licenses

http://oss.bosch-cm.com/nissan.html

TELEMATIC CONTROL UNIT

GEN2K GUID-BE97FD83-DF8C-4AD9-AB1F-08FA4DFE1534

A. INTRODUCTION

This product Telematic Control Unit

Gen2K incorporates the following soft-

ware:

(1) the software developed by, or devel-

oped for, Ficosa International, S.A. (“Fico-

sa”),

(2) the software owned by third party and

licensed to Ficosa,

(3) the software licensed under the GNU

GENERAL PUBLIC LICENSE, Version 2

(“GPL”),

(4) the software licensed under the GNU

LIBRARY GENERAL PUBLIC LICENSE, Ver-

sion 2.0 or the GNU LESSER GENERAL

PUBLIC LICENSE, Version 2.1 (collectively

“LGPL”), the Mozilla Public license v2

(“MPL”), the GPL-2.0 license with-

OpenSSL-exception (“GPLOpenSSL”) and

GNU GENERAL PUBLIC LICENSE, Version 3

with GCC exception (together with the

GPL software, jointly “Copyleft Software”),

and/or

(5) open sourced software licensed under

terms and conditions other than Copyleft

Software.

For the software classified as (3) or (4)

above, a copy of the license text is

included with the source code in the URL

indicated below, and please also refer to

the terms and conditions of Copyleft

Software licenses at the websites listed

below:

GPL: http://www.gnu.org/licenses/old-

licenses/gpl-2.0.html and https://www.

gnu.org/licenses/gpl-3.0.en.html

LGPL: http://www.gnu.org/licenses/old-

licenses/lgpl-2.1.html and http://www.

gnu.org/licenses/old-licenses/lgpl-2.0.

html

MPL: https://www.mozilla.org/en-US/

MPL/2.0/

GPL-2.0-with-OpenSSL-exception:

https://gitlab.com/cryptsetup/cryptset-

up/blob/master/COPYING

GPLv3 GCC Exception: https://www.gnu.

org/licenses/gcc-exception-3.1.en.html

The software classified as (3) and (4)

1. Introduction

Condition:

1-7

(12,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

1. Introduction

above are copyrighted by multiple people.

Please refer to the websites below regard-

ing the copyright notices of those people.

https://www.ficosa.com/software/

opensource/

The software licensed under the licenses

indicated in (3) and (4) above (“Copyleft

Software”) is distributed in the hope that it

will be useful, but WITHOUT ANY WAR-

RANTY, without even the implied warranty

of MERCHANTABILITY or FITNESS FOR A

PARTICULAR PURPOSE.

For at least three (3) years from delivery of

a device embedding the above product,

Ficosa will give to any third party who

contacts us at the Contact Information

provided below, for a charge no more

than our cost of physically performing

source code distribution, a complete ma-

chine-readable copy of the source code

corresponding to the Copyleft Software

indicated above. When requesting this

source code, please specify Product: Tele-

matic Control Unit Gen2K and version Cx9.

Furthermore, source code and licenses

corresponding to the Copyleft Software

listed above is freely available to you and

any member of the public at the website

listed below:

https://www.ficosa.com/software/

opensource/

[Contact Information]

For enquiries about open source software

at FICOSA, please contact Ficosa’s Com-

pliance Officer by email: FOSS@ficosa.com

Please note that we are unable to answer

any queries regarding source code details,

etc.

In addition, it is necessary for end users to

provide their own internet connection.

The end user is responsible for any con-

nection or line charges incurred through

browsing websites or downloading.

B. LICENSING AND COPYRIGHT NOTICE

INFORMATION

The software classified as (5) above con-

tains various open sourced software

(“OSS”) listed in the below website. Please

see the website indicted next for the

terms and conditions of the licenses

(OSS Licenses) and other information

regarding the OSS contained this Product:

https://www.ficosa.com/software/

opensource/

Condition:

1-8

(13,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
2 Getting started
Control buttons and touch screen display ................. 2-2
Control panel (Type A) (if so equipped) ................... 2-2
Control panel (Type B) (if so equipped) ................... 2-4
Control panel (Type C) (if so equipped) ................... 2-5
Control panel (Type D) (if so equipped) ................... 2-6
Control panel (Type E) (if so equipped) .................... 2-7
Liquid crystal display .............................................................. 2-8
Steering wheel switches (Type A) (if
so equipped) ................................................................................. 2-9
Steering wheel switches (Type B) (if
so equipped) .............................................................................. 2-10
Steering wheel switches (Type C) (if
so equipped) .............................................................................. 2-11
Steering wheel switches (Type D) (if
so equipped) .............................................................................. 2-12
Steering wheel switches (Type E) (if
so equipped) .............................................................................. 2-13
Steering wheel switches (Type F) (if
so equipped) .............................................................................. 2-14
USB (Universal Serial Bus) connection port and AUX
(auxiliary) input jack ............................................................. 2-14
Starting system .............................................................................. 2-16
Start-up screen (if so equipped) ................................ 2-16
Basic operation .............................................................................. 2-16
Selecting menu from Launch Bar ............................. 2-16
Touch panel operation ...................................................... 2-17
Main screen operations .................................................... 2-18
Adjusting settings .................................................................. 2-19
How to input letters and numbers ........................ 2-20
How to view and operate HOME
MENU screen ........................................................................... 2-21
Functions disabled while driving ............................. 2-22
System settings ............................................................................. 2-23
Settings menu ........................................................................ 2-24
Connections settings ....................................................... 2-26
Volume and Beeps settings ........................................ 2-28
Clock settings ......................................................................... 2-29
Display settings ..................................................................... 2-31
Language setting ................................................................ 2-31
Units settings .......................................................................... 2-31
Keyboard type settings .................................................. 2-31
Return all settings to default ..................................... 2-31
Condition:

(14,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

2. Getting started

CONTROL BUTTONS AND

TOUCH SCREEN DISPLAY

AIVINJN1-1D7E0D66-C372-4533-A154-A968B3FBAE87

CONTROL PANEL (Type A) (if so equipped)

AIVINJN1-0F79FBFA-8617-4697-9F42-8714291E5E6B

5GH0761X

Models with navigation system

5GH0762X

Models without navigation system

< >:

Push to eject a CD.

“Compact Disc (CD) player”

(page 3-25)

<MENU>:

Push to display the HOME MENU

screen.

“How to view and operate HOME

MENU screen” (page 2-21)

<MAP> (models with navigation sys-

tem):

Push to display the current location

map.

“Navigation screen” (page 6-3)

< >:

Push to switch between the day

screen (bright) and the night screen

(dark) and to adjust the level of screen

brightness. Push and hold the button

to turn off the display. Push the

button again to turn on the display.

<AUDIO>:

Push to display the audio screen.

When this button is pushed while the

audio screen is displayed, a screen to

select an audio source will be dis-

played.

“Selecting audio source”

(page 3-17)

Condition:

2-2

(15,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
<VOLUME/ >:
Push to turn the audio system on/off.
Turn to adjust the volume.
CD slot:
Insert a CD into the slot.
“Compact Disc (CD) player”
(page 3-25)
< >/< >:
Use the buttons for audio operations.
“Audio operations” (page 3-17)
<BACK>:
Pushing the button will display the
previous screen.
Push and hold to quit the voice
recognition session.
“7. Voice recognition”
<TUNE·SCROLL/OK>:
When a menu screen is displayed, turn
the dial to select items on the screen.
Push to confirm the selected item or
setting.
The button can also be used for audio
operations.
“Audio operations” (page 3-17)
Touch screen display:
Various information and operation
menus are displayed on the liquid
crystal display. Touch keys and icons
on the screen for operation.
“Touch panel operation”
(page 2-17)
< > (models without navigation
system):
Push to display the phone screen.
“4. Hands-Free Phone”
2. Getting started
Condition:
2-3

(16,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
2. Getting started
CONTROL PANEL (Type B) (if so equipped)
GUID-E55EA644-75E0-44B2-9FC1-B2AA33AA7EE8
5GH0842X<MENU>:
Push to display the HOME MENU
screen.
“How to view and operate HOME
MENU screen” (page 2-21)
< >:
Push to display the phone screen.
“4. Hands-Free Phone”
< >:
Push to switch between the day
screen (bright) and the night screen
(dark) and to adjust the level of screen
brightness. Push and hold the button
to turn off the display. Push the
button again to turn on the display.
<AUDIO>:
Push to display the audio screen.
When this button is pushed while the
audio screen is displayed, a screen to
select an audio source will be dis-
played.
“Selecting audio source”
(page 3-17)
<VOL/ >:
Push to turn the audio system on/off.
Turn to adjust the volume.
Touch screen display:
Various information and operation
menus are displayed on the liquid
crystal display. Touch keys and icons
on the screen for operation.
“Touch panel operation”
(page 2-17)
< >/< >:
Use the buttons for audio operations.
“Audio operations” (page 3-17)
<BACK>:
Pushing the button will display the
previous screen.
Push and hold to quit the voice
recognition session.
“7. Voice recognition”
<TUNE·SCROLL/SOUND>:
When a menu screen is displayed, turn
the dial to select items on the screen.
Push to confirm the selected item or
setting.
The button can also be used for audio
operations.
“Audio operations” (page 3-17)
Condition:
2-4

(17,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
CONTROL PANEL (Type C) (if so equipped)
GUID-A341EB97-4C4E-4AE7-8907-367930739FDB
5GH0874X<MENU>:
Push to display the HOME MENU
screen.
“How to view and operate HOME
MENU screen” (page 2-21)
<AUDIO>:
Push to display the audio screen.
When this button is pushed while the
audio screen is displayed, a screen to
select an audio source will be dis-
played.
“Selecting audio source”
(page 3-17)
< >/< >:
Use the buttons for audio operations.
“Audio operations” (page 3-17)
< >:
Pushing the button will display the
previous screen.
Push and hold to quit the voice
recognition session.
“7. Voice recognition”
< >:
Push to switch between the day
screen (bright) and the night screen
(dark) and to adjust the level of screen
brightness. Push and hold the button
to turn off the display. Push the
button again to turn on the display.
<VOL/ >:
Push to turn the audio system on/off.
Turn to adjust the volume.
Touch screen display:
Various information and operation
menus are displayed on the liquid
crystal display. Touch keys and icons
on the screen for operation.
“Touch panel operation”
(page 2-17)
2. Getting started
Condition:
2-5

(18,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

2. Getting started

CONTROL PANEL (Type D) (if so equipped)

GUID-0A3CE895-DFB9-4AA0-BEAB-F774B3EF7484

5GH0877X

Models with navigation system

5GH0878X

Models without navigation system

Touch screen display:

Various information and operation

menus are displayed on the liquid

crystal display. Touch keys and icons

on the screen for operation.

“Touch panel operation”

(page 2-17)

<VOL/ >:

Push to turn the audio system on/off.

Turn to adjust the volume.

< > :

Push to switch between the day

screen (bright) and the night screen

(dark) and to adjust the level of screen

brightness. Push and hold the button

to turn off the display. Push the

button again to turn on the display.

< >/< >:

Use the buttons for audio operations.

“Audio operations” (page 3-17)

<AUDIO>:

Push to display the audio screen.

When this button is pushed while the

audio screen is displayed, a screen to

select an audio source will be dis-

played.

“Selecting audio source”

(page 3-17)

Condition:

2-6

(19,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

<MENU>:

Push to display the HOME MENU

screen.

“How to view and operate HOME

MENU screen” (page 2-21)

<MAP> (models with navigation sys-

tem):

Push to display the current location

map.

“Navigation screen” (page 6-3)

< >:

Pushing the button will display the

previous screen.

Push and hold to quit the voice

recognition session.

“7. Voice recognition”

<TUNE·SCROLL/SOUND>:

When a menu screen is displayed, turn

the dial to select items on the screen.

Push to confirm the selected item or

setting.

The button can also be used for audio

operations.

“Audio operations” (page 3-17)

< > (models without navigation

system):

Push to display the phone screen.

“4. Hands-Free Phone”

CONTROL PANEL (Type E) (if so equipped)

GUID-306ED222-775F-4B2D-8886-EAC5A08E8744

5GH0875X

Models with navigation system

5GH0876X

Models without navigation system

2. Getting started

Condition:

2-7

(20,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
2. Getting started
< >:
Push to eject a CD.
“Compact Disc (CD) player”
(page 3-25)
<VOLUME/ >:
Push to turn the audio system on/off.
Turn to adjust the volume.
<AUDIO>:
Push to display the audio screen.
When this button is pushed while the
audio screen is displayed, a screen to
select an audio source will be dis-
played.
“Selecting audio source”
(page 3-17)
< >:
Push to switch between the day
screen (bright) and the night screen
(dark) and to adjust the level of screen
brightness. Push and hold the button
to turn off the display. Push the
button again to turn on the display.
<MAP> (models with navigation sys-
tem):
Push to display the current location
map.
“Navigation screen” (page 6-3)
<MENU>:
Push to display the HOME MENU
screen.
“How to view and operate HOME
MENU screen” (page 2-21)
CD slot:
Insert a CD into the slot.
“Compact Disc (CD) player”
(page 3-25)
<TUNE·SCROLL/OK>:
When a menu screen is displayed, turn
the dial to select items on the screen.
Push to confirm the selected item or
setting.
The button can also be used for audio
operations.
“Audio operations” (page 3-17)
<BACK>:
Pushing the button will display the
previous screen.
Push and hold to quit the voice
recognition session.
“7. Voice recognition”
< >/< >:
Use the buttons for audio operations.
“Audio operations” (page 3-17)
Touch screen display:
Various information and operation
menus are displayed on the liquid
crystal display. Touch keys and icons
on the screen for operation.
“Touch panel operation”
(page 2-17)
< > (models without navigation
system):
Push to display the phone screen.
“4. Hands-Free Phone”
LIQUID CRYSTAL DISPLAY
AIVINJN1-372A4E1B-44A4-402D-B2E2-BBC1C2EE95EA
The display is a liquid crystal display and
should be handled with care.
WARNING
AIVINJN1-BF8A0598-D125-4FF1-B357-47FEEE82AED5
Never disassemble the display. Some
parts utilize extremely high voltage.
Touching them may result in serious
personal injury.
Characteristics of liquid crystal
display AIVINJN1-606BA666-3A03-489B-86FB-CE0129A6D140
.If the temperature inside the vehicle is
especially low, the display will stay
relatively dim or the movement of the
images may be slow. These conditions
are normal. The display will function
Condition:
2-8

(21,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

normally when the interior of the

vehicle has warmed up.

.Some pixels in the display are darker or

brighter than others. This condition is

an inherent characteristic of liquid

crystal displays, and it is not a mal-

function.

.A remnant of the previous display

image may remain on the screen. This

screen burn is inherent in displays, and

it is not a malfunction.

.The screen may become distorted by

strong magnetic fields.

.Depending on the condition, bright-

ness may be adjusted automatically to

prevent the display from screen burn-

ing.

Maintenance of display

AIVINJN1-A416EADC-8AF0-4234-BF0D-ADD3A5F4AF96

To clean the display screen, use a dry, soft

cloth. If additional cleaning is necessary,

use a small amount of neutral detergent

with a soft cloth. Never spray the screen

with water or detergent. Dampen the

cloth first, then wipe the screen.

CAUTION

AIVINJN1-9B4AABC5-8311-4654-81B7-56927F60D9CA

.Clean the display with the ignition

switch in the OFF position. If the

display is cleaned while the igni-

tion switch is placed in the ON

position, unintentional operation

may occur.

.To clean the display, never use a

rough cloth, alcohol, benzine, thin-

ner or any kind of solvent or paper

towel with a chemical cleaning

agent. They will scratch or deterio-

rate the panel.

.Do not splash any liquid, such as

water or car fragrance, on the

display. Contact with liquid will

cause the system to malfunction.

STEERING WHEEL SWITCHES (Type

A) (if so equipped)

AIVINJN1-1B7CD1C1-5D48-4964-8816-2649513B59D0

5GH0763X

Type A

5GH0906X

Type B

< >:

Push the + or - side of the switch to

adjust the volume.

2. Getting started

Condition:

2-9

(22,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
2. Getting started
< >/< >:
Use the switches for audio operations.
“Audio operations” (page 3-17)
< > (Back):
Push to go back to the previous
screen while operating the Voice
Recognition System. Push and hold
to end a voice recognition session.
< >/< >/<OK>:
Push <>/< > to select the voice
command while operating the Voice
Recognition System.
Push <OK> to confirm the selected
item.
< > (TALK):
Push to use the Voice Recognition
System. Push and hold to end the
voice recognition session.
“Giving voice commands”
(page 7-2)
When Apple CarPlay
TM
or Android
Auto
TM
is active, pushing and holding
this switch will start a Siri® or Talk to
Google voice control session.
“Siri® operation” (page 5-22)
“Talk to Google operation”
(page 5-25)
If your iPhone® is connected to the in-
vehicle system via Bluetooth®, Siri®
Eyes Free can be activated by pushing
and holding this switch without hav-
ing to activate Apple CarPlay
TM
.
“Siri® Eyes Free” (page 5-26)
< > :
Push to answer a received call or to
end an active call.
“4. Hands-Free Phone”
When no phone is received or when
there is no active call, pushing this
switch will display the phone screen.
“Phone screen” (page 4-3)
INFO:
Steering wheel switches are mainly for the
vehicle information display control and
may not be able to operate the touch
screen display depending on the condi-
tions.
For details of the vehicle information dis-
play, refer to the vehicle Owner’s Manual.
STEERING WHEEL SWITCHES (Type
B) (if so equipped)
GUID-5210D2C2-C1F9-41A4-A9CA-B984718B5A1C
5GH0879X
<SOURCE>:
Push to change the audio source on
the vehicle information display.
</>:
Tilt </>to select the voice
command while operating the Voice
Recognition System.
Push </>to confirm the se-
lected item.
This switch can also be used for audio
operations.
“Audio operations” (page 3-17)
< >:
Push the + or - side of the switch to
adjust the volume.
Condition:
2-10

(23,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
< > (Back):
Push to go back to the previous
screen while operating the Voice
Recognition System. Push and hold
to end a voice recognition session.
< > (TALK):
Push to use the Voice Recognition
System. Push and hold to end the
voice recognition session.
“Giving voice commands”
(page 7-2)
When Apple CarPlay
TM
or Android
Auto
TM
is active, pushing and holding
this switch will start a Siri® or Talk to
Google voice control session.
“Siri® operation” (page 5-22)
“Talk to Google operation”
(page 5-25)
If your iPhone® is connected to the in-
vehicle system via Bluetooth®, Siri®
Eyes Free can be activated by pushing
and holding this switch without hav-
ing to activate Apple CarPlay
TM
.
“Siri® Eyes Free” (page 5-26)
< > :
Push to answer a received call or to
end an active call.
“4. Hands-Free Phone”
When no phone is received or when
there is no active call, pushing this
switch will display the phone screen.
“Phone screen” (page 4-3)
INFO:
Steering wheel switches are mainly for the
vehicle information display control and
may not be able to operate the touch
screen display depending on the condi-
tions.
For details of the vehicle information dis-
play, refer to the vehicle Owner’s Manual.
STEERING WHEEL SWITCHES (Type
C) (if so equipped)
GUID-75233314-D497-4871-8CB3-4B434125669F
5GH0895X
</>:
Tilt </>to select the voice
command while operating the Voice
Recognition System.
Push </>to confirm the se-
lected item.
This switch can also be used for audio
operations.
“Audio operations” (page 3-17)
<SOURCE>:
Push to change the audio source on
the vehicle information display.
< >:
Push the + or - side of the switch to
adjust the volume.
< > (TALK):
Push to use the Voice Recognition
System. Push and hold to end the
voice recognition session.
“Giving voice commands”
(page 7-2)
When Apple CarPlay
TM
or Android
Auto
TM
is active, pushing and holding
this switch will start a Siri® or Talk to
Google voice control session.
“Siri® operation” (page 5-22)
“Talk to Google operation”
(page 5-25)
If your iPhone® is connected to the in-
vehicle system via Bluetooth®, Siri®
Eyes Free can be activated by pushing
and holding this switch without hav-
ing to activate Apple CarPlay
TM
.
2. Getting started
Condition:
2-11

(24,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
2. Getting started
“Siri® Eyes Free” (page 5-26)
< >:
Push to answer a received call or to
end an active call.
“4. Hands-Free Phone”
When no phone is received or when
there is no active call, pushing this
switch will display the phone screen.
“Phone screen” (page 4-3)
INFO:
Steering wheel switches are mainly for the
vehicle information display control and
may not be able to operate the touch
screen display depending on the condi-
tions.
For details of the vehicle information dis-
play, refer to the vehicle Owner’s Manual.
STEERING WHEEL SWITCHES (Type
D) (if so equipped)
GUID-89985239-B362-49A0-86D2-2E6E4F27CF30
5GH0868X
<SOURCE>:
Push to change the audio source on
the vehicle information display.
</>:
Tilt </>to select the voice
command while operating the Voice
Recognition System.
Push </>to confirm the se-
lected item.
This switch can also be used for audio
operations.
“Audio operations” (page 3-17)
< >:
Push the + or - side of the switch to
adjust the volume.
< > (TALK):
Push to use the Voice Recognition
System. Push and hold to end the
voice recognition session.
“Giving voice commands”
(page 7-2)
When Apple CarPlay
TM
or Android
Auto
TM
is active, pushing and holding
this switch will start a Siri® or Talk to
Google voice control session.
“Siri® operation” (page 5-22)
“Talk to Google operation”
(page 5-25)
If your iPhone® is connected to the in-
vehicle system via Bluetooth®, Siri®
Eyes Free can be activated by pushing
and holding this switch without hav-
ing to activate Apple CarPlay
TM
.
“Siri® Eyes Free” (page 5-26)
< >:
Push to answer a received call or to
end an active call.
“4. Hands-Free Phone”
When no phone is received or when
there is no active call, pushing this
switch will display the phone screen.
“Phone screen” (page 4-3)
Condition:
2-12

(25,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
INFO:
Steering wheel switches are mainly for the
vehicle information display control and
may not be able to operate the touch
screen display depending on the condi-
tions.
For details of the vehicle information dis-
play, refer to the vehicle Owner’s Manual.
STEERING WHEEL SWITCHES (Type
E) (if so equipped)
GUID-2EE80455-A7EA-4C95-98DC-7BDB3F931FC5
5GH0880X
<SOURCE>:
Push to change the audio source on
the vehicle information display.
</>:
Tilt </>to select the voice
command while operating the Voice
Recognition System.
Push </>to confirm the se-
lected item.
This switch can also be used for audio
operations.
“Audio operations” (page 3-17)
< >:
Push the + or - side of the switch to
adjust the volume.
< > (TALK):
Push to use the Voice Recognition
System. Push and hold to end the
voice recognition session.
“Giving voice commands”
(page 7-2)
When Apple CarPlay
TM
or Android
Auto
TM
is active, pushing and holding
this switch will start a Siri® or Talk to
Google voice control session.
“Siri® operation” (page 5-22)
“Talk to Google operation”
(page 5-25)
If your iPhone® is connected to the in-
vehicle system via Bluetooth®, Siri®
Eyes Free can be activated by pushing
and holding this switch without hav-
ing to activate Apple CarPlay
TM
.
“Siri® Eyes Free” (page 5-26)
< >:
Push to answer a received call or to
end an active call.
“4. Hands-Free Phone”
When no phone is received or when
there is no active call, pushing this
switch will display the phone screen.
“Phone screen” (page 4-3)
INFO:
Steering wheel switches are mainly for the
vehicle information display control and
may not be able to operate the touch
screen display depending on the condi-
tions.
For details of the vehicle information dis-
play, refer to the vehicle Owner’s Manual.
2. Getting started
Condition:
2-13

(26,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
2. Getting started
STEERING WHEEL SWITCHES (Type
F) (if so equipped)
GUID-74A9372F-5E0E-472E-868E-D8D522A0CE23
5GA0290X
<SOURCE>:
Push to change the audio source on
the vehicle information display.
</>:
Tilt </>to select the voice
command while operating the Voice
Recognition System.
Push </>to confirm the se-
lected item.
This switch can also be used for audio
operations.
“Audio operations” (page 3-17)
< >:
Push the + or - side of the switch to
adjust the volume.
< > (TALK):
Push to use the Voice Recognition
System. Push and hold to end the
voice recognition session.
“Giving voice commands”
(page 7-2)
When Apple CarPlay
TM
or Android
Auto
TM
is active, pushing and holding
this switch will start a Siri® or Talk to
Google voice control session.
“Siri® operation” (page 5-22)
“Talk to Google operation”
(page 5-25)
If your iPhone® is connected to the in-
vehicle system via Bluetooth®, Siri®
Eyes Free can be activated by pushing
and holding this switch without hav-
ing to activate Apple CarPlay
TM
.
“Siri® Eyes Free” (page 5-26)
< > :
Push to answer a received call or to
end an active call.
“4. Hands-Free Phone”
When no phone is received or when
there is no active call, pushing this
switch will display the phone screen.
“Phone screen” (page 4-3)
INFO:
Steering wheel switches are mainly for the
vehicle information display control and
may not be able to operate the touch
screen display depending on the condi-
tions.
For details of the vehicle information dis-
play, refer to the vehicle Owner’s Manual.
USB (Universal Serial Bus) CON-
NECTION PORT AND AUX (auxili-
ary) INPUT JACK
AIVINJN1-E9AC7D61-BCC2-48F6-87C6-43CA8EAE0D5D
WARNING
AIVINJN1-657A56AD-13C7-4818-B036-02410624DCC8
Do not connect, disconnect or operate
the USB device while driving. Doing so
can be a distraction. If distracted you
could lose control of your vehicle and
cause an accident or serious injury.
CAUTION
AIVINJN1-36464817-8CB6-4B42-9865-591E40742C6D
.Do not force the USB device into
the USB connection port. Inserting
the USB device tilted or up-side-
down into the port may damage
the port. Make sure that the USB
device is connected correctly into
the USB connection port.
Condition:
2-14

(27,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

.Do not grab the USB connection

port cover (if so equipped) when

pulling the USB device out of the

port. This could damage the port

and the cover.

.Do not leave the USB cable in a

place where it can be pulled unin-

tentionally. Pulling the cable may

damage the port.

The vehicle is equipped with a USB con-

nection port and an AUX input jack. When

connected, the in-vehicle audio system

can play audio contents from the compa-

tible device.

The USB connection port and the AUX

input jack are located on the lower part of

the instrument panel.

5GH0905X

Media hub Type A

5GH0897X

Media hub Type B

5GH0910X

Media hub Type C

AUX (Auxiliary) input jack:

Connect an audio player that accepts

a 1/8 in (3.5 mm) TRS connector (such

as an MP3 player etc.) to play music.

USB connection port:

Connect a compatible device to play

media such as an iPod® or a USB

memory device.

Connect an iPhone® or an Android

phone to use Apple CarPlay

Android Auto

USB connection port (for USB Type-C

only):

Connect a compatible device to play

media such a USB memory device.

Connect an Android phone to use

Android Auto

2. Getting started

Condition:

2-15

(28,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

2. Getting started

INFO:

.Refer to your AUX and USB device

manufacturer’s owner information re-

garding the proper use and care of the

device.

.Cables made by Apple Inc. should be

used to connect electronic devices

marketed by Apple Inc.

.iPod® and iPhone® functions cannot

be operated if the device is connected

to the USB connection port (for USB

Type-C only) .

STARTING SYSTEM

AIVINJN1-F7A7E93C-1CA4-4F06-A2C8-03063B07BE78

The system starts when the ignition

switch is placed in the ACC or ON position.

START-UP SCREEN (if so

equipped)

AIVINJN1-1CCFB241-BAB4-4C9C-8412-EF467F738826

The start-up screen is displayed when the

ignition switch is placed in the ACC or ON

position.

After an animated start-up screen is

displayed, a message screen will be dis-

played. Touch [OK] after reading and

agreeing to the message displayed on

the screen. If you do not agree to the

message, some of the functions on the

system will be disabled.

NOTE:

Do not keep the system running with

the engine or the hybrid system

stopped. Doing so may discharge the

vehicle battery (12V battery). When you

use the system, always keep the engine

or the hybrid system running.

BASIC OPERATION

AIVINJN1-A9E6F207-4B16-4522-84EB-16B8F6F3D435

The system can be operated with the

touch panel as well as switches on the

control panel and the steering wheel.

This manual mainly describes the touch

panel operation.

SELECTING MENU FROM LAUNCH

BAR AIVINJN1-F5B8AC5D-C122-4534-9FC7-2A14ED1A68AA

5GH0765X

Models with navigation system

Condition:

2-16

(29,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
5GH0803X
Models without navigation system
Various system functions can be accessed
by touching the items on the Launch Bar
which is displayed on most of the main
menu screens. (The Launch Bar does not
appear on some screens such as scrolled
map screen, keyboard screen, etc.)
Touch the item on the Launch Bar to
display the corresponding screens.
The items on the Launch Bar differ
according to which button on the control
panel is pushed.
The following menus are available on the
Launch Bar.
When pushing <MENU>:
Shortcuts for various functions are dis-
played.
Displayed items may vary depending on
models and specifications.
.[Phone]*
“Phone” (page 4-4)
.[Info]
“Information menu” (page 5-2)
.[Audio]
“Audio operations” (page 3-17)
.[MENU]
Touching [MENU] on the Launch Bar
will display the center page of the
HOME MENU screen.
.[Map]
“Displaying navigation screen”
(page 6-3)
.[Connections]
“Connections settings”
(page 2-26)
.[Settings]
“System settings” (page 2-23)
*: [Phone] will be replaced by [CarPlay]
when Apple CarPlay
TM
is active, and it will
be replaced by [ ] when Android Auto
TM
is
active.
When pushing <AUDIO>:
Shortcuts mainly for the audio functions
are displayed.
“Selecting audio source” (page 3-17)
When pushing <MAP> (if so equipped):
Shortcuts mainly for the navigation func-
tions are displayed.
“Launch Bar” (page 6-3)
TOUCH PANEL OPERATION
AIVINJN1-A1BF9C2C-4643-4997-9E6E-93C94C9905EC
The system can be controlled mainly by
the touch panel operation.
The following operations are examples of
the touch panel operation.
The map operations are also available
with touch panel operation.
“Map operation” (page 6-5)
2. Getting started
Condition:
2-17

(30,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

2. Getting started

.Touch

5GH0766X

Touch the item on the screen to dis-

play the corresponding screen.

INFO:

Some keys function differently depending

on whether the key is touched briefly or

when it is being touched and held for a

few seconds.

.Swipe/Flick

5GH0767X

Menu screen pages will skip to the

next page when swiped/flicked hori-

zontally.

Some of the list screens can also be

scrolled by swiping/flicking on the

screen vertically.

MAIN SCREEN OPERATIONS

AIVINJN1-B2704A91-F2DB-44B4-827A-4CF2E650F379

The following operations are generally

available on the various screen.

.Displaying previous screen

5GH0768X

Touch [ ] to return to the screen

displayed previously.

.Horizontal scrolling

5GH0769X

Touch [<] to scroll to the previous

page.

Condition:

2-18

(31,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Touch [>] to scroll to the next page.

Indicates the position of the currently

displayed page.

.Vertical scrolling

5GH0770X

Example

Touch [ ] or [ ] to skip to the

previous or next page.

Touch [ ] or [ ] (if so equipped) to

scroll the message or list one item at a

time.

Indicates the total number of items in

the list and the entry number of the

selected item.

INFO:

Depending on the screens, swiping on the

touch screen can scroll pages vertically or

horizontally.

.Scrolling list by selecting alphabet

5GH0771X

Touch a preferred location within the

alphabetical list.

The detailed alphabetical list will be

shown. Touch to scroll the list items to

the section that begins with the letter

selected.

INFO:

When [A-Z] is displayed on the list screen,

touching [A-Z] and turning <TUNE·SC-

ROLL/OK>/<TUNE·SCROLL/SOUND> (if

so equipped) can also select an alphabet

to scroll.

ADJUSTING SETTINGS

AIVINJN1-7511E082-9116-41D3-90B0-85329BDCEE4D

5GH0773X

Example

Touch adjustment keys, such as [-]/[+],

etc., to adjust each item. Each time a key is

touched, the indicator moves along the

bar.

For items with [ON] indicator, touch the

menu item to turn on/off the setting. The

indicator light will turn on when the

setting is turned on.

2. Getting started

Condition:

2-19

(32,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

2. Getting started

HOW TO INPUT LETTERS AND

NUMBERS

AIVINJN1-95CCE032-178B-4697-8BFB-8BB9856AFD9C

Basic operations to enter letters and

numbers are explained here.

Character and number input screens vary

depending on the conditions.

Character input screen

AIVINJN1-9244CA6E-8CE8-4E92-9F93-3F3D3E32096E

5GH0830X

Type A

5GH0858X

Type B

Entered characters are displayed.

Touch to delete the last character

entered.

Touch and hold to delete all the

characters entered.

Touch to change the type of key-

board.

Touch to switch between the upper-

case and lowercase character input

screen.

Touch to enter a space.

Touch to enter a character.

Touch to confirm the entry.

Number input screen

AIVINJN1-BCECD62B-4D09-48C9-997D-360243F5586E

5GH0775X

Entered numbers are displayed.

Touch to delete the last number

entered.

Touch and hold to delete all the

numbers entered.

Touch to enter a number.

Touch to confirm the entry.

Condition:

2-20

(33,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

HOW TO VIEW AND OPERATE

HOME MENU SCREEN

AIVINJN1-CA23AE87-F50B-4970-A7BD-D9932C5241AB

Push <MENU> to display the HOME MENU

screen.

The HOME MENU consists of 3 pages

which can display preferred shortcuts

and widgets.

5GH0776X

Example

Shortcut icons:

Icons for frequently used menu items

can be placed on the HOME MENU

screens as shortcuts.

Widget:

Useful information from primary

menu functions can be displayed as

widgets. Depending on the contents

of the widget, keys may be available

for operation of the function.

Customizing HOME MENU screen

AIVINJN1-6891DABF-54F5-4264-BFFC-F75F8C5E4B9B

The HOME MENU screen can be persona-

lized by selecting which shortcuts and

widgets are to be displayed and where to

place them on the screen.

Selecting shortcut or widget:

5GH0891X

Example

1. Touch [Settings] on the Launch Bar.

2. Touch [Customize Home Menu].

3. Touch [Shortcuts] or [Widgets].

4. Drag the shortcut or widget icon to

each page layout .

If a different shortcut or a widget is

already located on the page layout ,

a message will be displayed. Touch

[Yes] to replace the shortcut/widget.

The page layout can be changed by

dragging the icons.

The categories of shortcuts can be

changed by touching [Category] .

Dragging an icon into the [ ] can

delete the current shortcut or widget

to create a blank spot.

INFO:

Touch [ ] , and then a message will

appear. While the message is dis-

played, touching any icon on the page

layout and [Delete] can delete the

selected icon. To delete all icons, touch

[Select All] and then [Delete].

Available shortcut/widget categories:

Available shortcut categories:

Available setting items may vary depend-

ing on models and specifications.

[Audio]

[Route]

[Phone]

[Settings]

[Info]

[Voice Recognition]

[Destination]

2. Getting started

Condition:

2-21

(34,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

2. Getting started

Available widgets:

Available setting items may vary depend-

ing on models and specifications.

[Phone]

[Audio]

[Map]

[Turn by Turn]

[Current Conditions]

[5-Day Weather Forecast]

[Hourly Weather Forecast]

[SXM Sports Scores]

[Clock]

INFO:

.The HOME MENU screen can display up

to 8 shortcuts on a page.

.Some widgets, such as [Audio], [Clock],

etc., can be selected from 2 shortcut

spot sizes and 4 shortcut spot sizes. All

other widgets require 4 shortcut spot

sizes to be displayed.

.Access to the SiriusXM® services (Sir-

iusXM® Audio, SiriusXM Traffic

(if so

equipped), and SiriusXM® Travel Link (if

so equipped)) requires a SiriusXM®

subscription.

“SiriusXM® Travel Link” (page 5-18)

“Radio” (page 3-19)

“SiriusXM Traffic

information”

(page 6-45)

FUNCTIONS DISABLED WHILE DRIVING

AIVINJN1-96075C82-A5BC-42F2-A4C5-DF0BB2863C3F

5GH0804X

Example

Condition:

2-22

(35,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

To ensure safe driving, some functions

cannot be operated or have limited op-

eration while the vehicle is in motion.

The on-screen text and keys for these

restricted functions will be “grayed-out” or

muted and cannot be selected while

driving. In some cases, a screen message

will appear indicating a restricted func-

tion.

Restricted functions while driving include:

.Character (letter and number) input

screen

.Scrolling and viewing of certain list

screens

.Displaying detailed information and

selecting items on some information

screens

.Adding/editing home location, ad-

dress book entries and current route

.Connecting Bluetooth® devices for the

first time

.Placing a call by dialing a number or

selecting a phonebook entry

.Adjusting settings for phone, Nissan-

Connect® Services (if so equipped),

Bluetooth® functions, and other var-

ious functions

These functions will become available

again when the vehicle is not in motion.

Some of the destination setting functions

that become unavailable while driving can

be operated by the Voice Recognition

System. Available voice commands may

differ depending on the language setting.

SYSTEM SETTINGS

AIVINJN1-811B4F8E-8E41-435D-BA44-76204FB0B276

The system settings can be changed for

personal convenience.

2. Getting started

Condition:

2-23

(36,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
2. Getting started
SETTINGS MENU
AIVINJN1-12A7E9D2-EBD5-4390-9640-2629B7A307F5
Touch [Settings] on the Launch Bar and touch a setting item you wish to adjust.
Available setting items may vary depending on models and specifications.
Available setting items
Setting item Result
[Connections] Displays the Bluetooth®, Wi-Fi and USB setting screen.
“Connections settings” (page 2-26)
[Phone] Displays the phone and text message settings screen.
“Phone and text message settings” (page 4-10)
[Navigation] Displays the navigation settings screen.
“Navigation settings” (page 6-57)
[Sound] Displays the audio settings screen.
“Audio settings” (page 3-40)
[Volume & Beeps] Displays the volume adjustment screen.
“Volume and Beeps settings” (page 2-28)
[System Update] [Version Information] Displays the information of the Software Version, Map Version, etc.
[Software Update] The system software can be updated.
“Updating system software” (page 5-5)
[Map Update] The map data can be updated.
“How to update map data” (page 6-65)
[Clock] Displays the clock adjustment screen.
“Clock settings” (page 2-29)
[Customize Home Menu] Displays the HOME MENU editing screen.
“Customizing HOME MENU screen” (page 2-21)
[Customize Audio Sources] Displays the editing screen for audio source menus on the Launch Bar.
“Selecting from Launch Bar” (page 3-18)
[NissanConnect Services] Displays the NissanConnect® Services settings screen.
“NissanConnect® Services settings” (page 5-17)
Condition:
2-24

(37,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
Setting item Result
[System Voice] Displays the system voice settings screen.
“System Voice settings” (page 7-13)
[Camera] Displays the camera settings screen.
See the vehicle Owner’s Manual for details of the monitor system.
[Parking Sonar] Displays the sonar settings screen.
See the vehicle Owner’s Manual for details of the sonar system.
[Others] [Display] Displays the display settings screen.
“Display settings” (page 2-31)
[Language] Displays the language settings screen.
“Language setting” (page 2-31)
[Units] Displays the units settings screen.
“Units settings” (page 2-31)
[Keyboard Type] Displays the keyboard type settings screen.
“Keyboard type settings” (page 2-31)
[Return All Settings to Default] This resets all settings to default.
“Return all settings to default” (page 2-31)
[Apps] [Apple CarPlay] Displays the Apple CarPlay
TM
settings screen.
“Apple CarPlay
TM
settings” (page 5-22)
[Android Auto] Displays the Android Auto
TM
settings screen.
“Android Auto
TM
settings” (page 5-25)
INFO:
The system software and map (if so equipped) update menus can be accessed from [System Information] on the information screen,
even if the menus are not available from the settings screen.
“Information menu” (page 5-2)
2. Getting started
Condition:
2-25

(38,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

2. Getting started

CONNECTIONS SETTINGS

GUID-B1D6479B-2DE5-4B50-AD8F-54A4EC13EA7D

Changing the settings and viewing infor-

mation of Bluetooth®, Wi-Fi and USB are

available on the Connections settings

screen.

Setting Bluetooth®

GUID-BEE172A8-E0E0-4F75-8762-230628E44312

Your vehicle is equipped with the Blue-

tooth® Hands-Free Phone System and

Bluetooth® audio device support. If you

are an owner of a compatible Bluetooth®

enabled cellular phone or Bluetooth®

audio device, you can set up the wireless

connection between your cellular phone

and the in-vehicle phone module or Blue-

tooth® audio device and in-vehicle audio

module. With Bluetooth® wireless technol-

ogy, you can make or receive a telephone

call with your cellular phone in your

pocket and listen to Bluetooth® audio.

“Bluetooth® audio” (page 3-35)

“Bluetooth® Hands-Free Phone Sys-

tem” (page 4-2)

Connecting cellular phone/audio de-

vice:

5GH0778X

To use the Bluetooth® device with the in-

vehicle system for the first time, the device

connection operation is required.

1. Touch [Settings] on the Launch Bar.

2. Touch [Connections].

3. Touch [Bluetooth] and touch [Add

New]. A message is displayed.

4. Touch [Yes] to connect a cellular

phone. Touch [No] to connect an audio

device and operate as guided by the

system. (Operations may differ de-

pending on the device.)

NOTE:

Some cellular phones or other devices

may cause interference or a buzzing

noise to come from the audio system

speakers. Storing the device in a differ-

ent location may reduce or eliminate the

noise.

INFO:

.The paired phone will be added to the

list on the Bluetooth® connection

screen.

.Touching name of the other device on

the list will switch the connected

device.

.Touching [ ] will allow the device to

be connected via Bluetooth® and be

used on the Hands-Free Phone Sys-

tem.

.Touching [ ] will allow the device to

be connected via Bluetooth® and be

used for Bluetooth® Audio.

.Touching [ ] will display the informa-

tion of the cellular phone.

.Up to 6 Bluetooth® devices can be

connected. If 6 devices are already

connected, one of the devices must

first be deleted before another device

can be connected.

Condition:

2-26

(39,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

.The pairing procedure of the cellular

phone varies according to each cellu-

lar phone. See the cellular phone Own-

er’s Manual for the details.

.Visit www.nissanusa.com/bluetooth/

for a recommended Bluetooth®

device.

Bluetooth® settings:

The Bluetooth® settings can be changed

according to your preference.

1. Touch [Settings] on the Launch Bar.

2. Touch [Connections].

3. Touch [Bluetooth].

4. Touch [ ].

Available setting items

Setting item Action

[Bluetooth] Turns the Bluetooth®

connection on/off.

[Device Name] The device name can be

changed.

[PIN] The PIN code can be

changed.

INFO:

With [Device Name], the device name that

appears on the screen can be changed

and be renamed from the name set as

default to the preferred name (such as

“Steve’s Car” for example).

Deleting cellular phone/audio device:

Paired phones can be deleted from the

list.

1. Touch [Settings] on the Launch Bar.

2. Touch [Connections].

3. Touch [Bluetooth].

4. Touch [ ] by the cellular phone name

you wish to delete.

5. Touch [Delete]. Touch [Yes] when a

message appears.

Wi-Fi Setting

GUID-58574DBB-6838-41C9-A054-FAC518DD656A

A Wi-Fi connection can be made by using

an available Wi-Fi network near the vehi-

cle or tethering function of smartphone,

etc. Wi-Fi connectivity is useful for updat-

ing map data (if so equipped) and system

software, or using online services, such as

Online Search (if so equipped) or Premium

Traffic (if so equipped).

“Updating system software”

(page 5-5)

“How to update map data”

(page 6-65)

“Online Search” (page 6-19)

“Premium Traffic information”

(page 6-46)

Connecting to a Wi-Fi network:

5GH0779X

To use the Wi-Fi connection for the first

time, the following connecting proce-

dures are required.

1. Touch [Settings] on the Launch Bar.

2. Touch [Connections].

3. Touch [Wi-Fi].

4. Touch the name of the device you

wish to connect.

: Indicates that a password is set.

: Indicates the strength of the signal

the Wi-Fi device is receiving.

5. Enter the network password and

touch [OK]. The device will be con-

nected.

2. Getting started

Condition:

2-27

(40,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

2. Getting started

If a listed device is in a status capable

of making Wi-Fi connection, touching

the device name on the list will start

the connection.

INFO:

.Enter the password correctly, includ-

ing capitalization.

.Touching the [ ] will display the net-

work information. Turning [Auto Con-

nect] on will automatically connect the

vehicle to the network if the network is

available.

.The Wi-Fi hotspot communication is

not available on this system.

.Enabling the Wi-Fi hotspot functional-

ity of your smartphone may incur

additional charges from your cellular

provider. Consult your cellular provider

contract regarding the communica-

tion fee.

.System can connect to only WPA2

security network (not connect WEP,

WPA1 network).

.Wi-Fi networks that require a web

browser cannot be accessed through

this units.

Wi-Fi settings:

The Wi-Fi settings can be changed ac-

cording to your preference.

1. Touch [Settings] on the Launch Bar.

2. Touch [Connections].

3. Touch [Wi-Fi].

4. Touch [ ].

5. Touch a preferred item.

Available setting items

Setting item Action

[Wi-Fi] Turns the Wi-Fi connec-

tion on/off.

[Security] The used cipher system

is displayed.

Deleting Wi-Fi network:

The stored Wi-Fi network can be deleted

from the list.

1. Touch [Settings] on the Launch Bar.

2. Touch [Connections].

3. Touch [Wi-Fi].

4. Touch [ ] by the name of the network

you wish to delete.

5. Touch [Delete]. Touch [Yes] when a

message appears.

Displaying USB device information

GUID-0410F8D5-4D74-4C02-A786-2D75AB254FEC

The information of the connected USB

device can be viewed.

“USB memory device player”

(page 3-28)

5GH0780X

1. Touch [Settings] on the Launch Bar.

2. Touch [Connections].

3. Touch [USB].

4. Touch the name of the device you

wish to check. The name and the type

of the device are displayed.

VOLUME AND BEEPS SETTINGS

AIVINJN1-210F184A-892E-4546-8D2A-0868DA7C4F52

The volume of various functions including

audio, phone, navigation voice guidance

(if so equipped), and system beeps can be

adjusted.

1. Touch [Settings] on the Launch Bar.

2. Touch [Volume & Beeps].

Available setting items may vary depend-

Condition:

2-28

(41,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

ing on models and specifications.

Available setting items

Setting item Action

[Audio Vo-

lume]

Adjusts the volume level

of the audio system.

[Guidance Vo-

lume]

Adjusts the volume level

of the guidance voice.

[Ringtone] Adjusts the volume level

of the ringtone of incom-

ing calls.

[Outgoing Call] Adjusts the volume level

of the outgoing calls.

[Button Beeps] Turns on/off the button

beep sound and alarm for

prohibited operations.

[Guidance

Voice]

Turns on/off the voice

guidance.

CLOCK SETTINGS

AIVINJN1-6FB05DB7-7A72-4B43-A7A5-4796C1370711

Clock settings of the system can be

changed.

1. Touch [Settings] on the Launch Bar.

2. Touch [Clock].

Available setting items may vary depend-

ing on models and specifications.

2. Getting started

Condition:

2-29

(42,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

2. Getting started

Available setting items

Setting item 1 Setting item 2 Action

[On-Screen Clock] Sets the clock display on/off. When this item is on, the clock display

appears.

[Clock Mode] [Auto] Adjusts clock time automatically using GPS.

[Time Zone] Adjusts clock time reflecting selected time zone.

[Manual] Reflects [Set Clock Manually] settings.

[Clock Format] [12H] The clock can be set to 12 hours or 24 hours.

[24H]

[Date Format] The display format of the day, month and year display can be

selected.

[Offset (hour)] Adjusts the offset value (hour/minutes). [Clock Mode] must be set to

[Auto] or [Time Zone] for this option to be available.

[Offset (min.)]

[Daylight Savings Time] Turns on/off the daylight saving time setting. This option only

appears to be available when [Clock Mode] is set to [Time Zone].

[Time Zone] Select an appropriate time zone from the list. [Clock Mode] must be

set to [Time Zone] for this option to be available.

[Set Clock Manually] Adjusts the clock manually. Touch [+] or [-] to adjust the hours,

minutes, day, month and year up or down. When [Clock Format] is

set to [12H], [AM]/[PM] can be selected.

Models with navigation system:

[Clock Mode] must be set to [Manual] for this option to be available.

INFO:

When the [On-Screen Clock] setting is turned on, the clock settings screen can also be displayed by touching the clock at the upper

right corner of the screen.

Condition:

2-30

(43,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

DISPLAY SETTINGS

AIVINJN1-6BF6BB79-7BC5-47FC-AE67-09BC1505C4C5

Display settings can be adjusted.

1. Touch [Settings] on the Launch Bar.

2. Touch [Others].

3. Touch [Display].

4. Touch a preferred item to adjust the

setting.

Available setting items

Setting item Action

[Display] Turns the screen off.

Pushing and holding <>

will also turn off the screen.

Push <>to turn the

screen back on.

[Brightness] Adjusts the brightness of

the display.

[Contrast] Adjusts the contrast of the

display.

[Black Level] Adjusts the black level of

the display.

LANGUAGE SETTING

AIVINJN1-D7E9171E-3B1C-414A-AD30-925AD34D89F6

This changes the language used in the

system.

1. Touch [Settings] on the Launch Bar.

2. Touch [Others].

3. Touch [Language].

Selects the preferred system lan-

guage.

The language setting is applied to the

touch screen display, voice announce-

ments, the Voice Recognition System.

INFO:

.Models with navigation system:

If the language is not set to the

standard language of the current

vehicle position, the route guidance,

the Voice Recognition System, etc. for

map operation are not available.

.Do not change the position of the

ignition switch while changing the

language.

UNITS SETTINGS

GUID-5357F055-6C98-47D0-8C9F-E8D92E236164

This changes the units used in the system.

1. Touch [Settings] on the Launch Bar.

2. Touch [Others].

3. Touch [Units].

Setting item Action

[Distance] Select the distance

unit.

[Temperature] Select the tempera-

ture unit.

INFO:

.Do not change the position of the

ignition switch while changing the

units for distance or temperature.

.Depending on the models, if the se-

lected unit is also supported by the

vehicle information display, the unit

setting of the vehicle information dis-

play will also change with the units

displayed on the touch screen display.

KEYBOARD TYPE SETTINGS

GUID-9DE94100-E084-401F-AEC3-2D71C2119A0B

The keyboard layout of the character

input screens can be selected.

1. Touch [Settings] on the Launch Bar.

2. Touch [Others].

3. Touch [Keyboard Type]. The type of

keyboard switches between ABC and

QWERTY.

RETURN ALL SETTINGS TO DE-

FAULT GUID-F8F3CD4E-6B1E-4129-A4B4-C7A452414D93

This resets all settings to default.

1. Touch [Settings] on the Launch Bar.

2. Touch [Others].

3. Touch [Return All Settings to Default].

4. A confirmation message is displayed.

Touch [Yes] to set the settings to

default.

2. Getting started

Condition:

2-31

(44,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

2. Getting started

MEMO

Condition:

2-32

(45,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
3 Audio system
Audio operation precautions ................................................. 3-2
Radio ................................................................................................... 3-2
Compact Disc (CD) player (if so equipped) ............ 3-4
USB (Universal Serial Bus) connection port .......... 3-5
Compressed Audio Files (MP3/WMA/AAC) ............ 3-5
Bluetooth® audio ....................................................................... 3-9
Names and functions of audio
control buttons .............................................................................. 3-10
Audio main buttons (Type A) (if
so equipped) .............................................................................. 3-10
Audio main buttons (Type B) (if
so equipped) .............................................................................. 3-11
Audio main buttons (Type C) (if
so equipped) .............................................................................. 3-12
Audio main buttons (Type D) (if
so equipped) .............................................................................. 3-13
Audio main buttons (Type E) (if
so equipped) .............................................................................. 3-14
Audio control steering wheel switches (Type A) (if
so equipped) .............................................................................. 3-14
Audio control steering wheel switches (Type B) (if
so equipped) .............................................................................. 3-15
Audio control steering wheel switches (Type C) (if
so equipped) .............................................................................. 3-15
Audio control steering wheel switches (Type D) (if
so equipped) .............................................................................. 3-15
Audio control steering wheel switches (Type E) (if
so equipped) .............................................................................. 3-16
Audio control steering wheel switches (Type F) (if
so equipped) ............................................................................ 3-16
Audio operations .......................................................................... 3-17
Audio main operation ...................................................... 3-17
Radio .............................................................................................. 3-19
Compact Disc (CD) player (if
so equipped) ............................................................................ 3-25
USB memory device player .......................................... 3-28
iPod® player ............................................................................. 3-32
Bluetooth® audio ................................................................. 3-35
Auxiliary (AUX) devices ..................................................... 3-38
Smartphone audio ............................................................. 3-39
Audio settings ................................................................................. 3-40
Audio adjustments with audio adjust bar (if
so equipped) ............................................................................ 3-41
CD/USB memory device care and cleaning ............ 3-41
CD (if so equipped) ............................................................. 3-41
USB memory device .......................................................... 3-42
Condition:

(46,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

3. Audio system

AUDIO OPERATION PRECAU-

TIONS

AIVINJN1-B0DBBB37-B849-425F-902A-DDABE30FE9B4

CAUTION

AIVINJN1-EA479F95-2967-4EEA-8547-ECB13A8F56C8

.Operate the audio system only

when the vehicle engine or the

hybrid system is running. Operat-

ing the audio system for extended

periods of time with the engine or

the hybrid system turned off can

discharge the vehicle battery.

.Do not allow the system to get wet.

Excessive moisture such as spilled

liquids may cause the system to

malfunction.

RADIO AIVINJN1-2E7BDA12-EFEE-40F2-BD7E-0C1AD5ECA109

Place the ignition switch in the ACC or ON

position before turning on the radio. If you

listen to the radio with the engine or the

hybrid system not running, the ignition

switch should be placed in the ACC

position.

Radio reception is affected by station

signal strength, distance from radio trans-

mitter, buildings, bridges, mountains and

other external influences. Intermittent

changes in reception quality normally

are caused by these external influences.

Using a cellular phone in or near the

vehicle may influence radio reception

quality.

Radio reception

AIVINJN1-89FE3704-0B57-4447-88CD-7BD9D337A7DC

Your radio system is equipped with state-

of-the-art electronic circuits to enhance

radio reception. These circuits are de-

signed to extend reception range, and to

enhance the quality of that reception.

However there are some general charac-

teristics of both FM and AM radio signals

that can affect radio reception quality in a

moving vehicle, even when the finest

equipment is used. These characteristics

are completely normal in a given recep-

tion area, and do not indicate any mal-

function in your radio system.

Reception conditions will constantly

change because of vehicle movement.

Buildings, terrain, signal distance and

interference from other vehicles can work

against ideal reception. Described below

are some of the factors that can affect

your radio reception.

Some cellular phones or other devices

may cause interference or a buzzing noise

to come from the audio system speakers.

Storing the device in a different location

may reduce or eliminate the noise.

FM radio reception

AIVINJN1-275BC1BF-3C52-437B-9A90-2B55439E4402

SAA0306

Range: the FM range is normally limited to

25 to 30 miles (40 to 48 km), with

monaural (single station) FM having

slightly more range than stereo FM. Ex-

ternal influences may sometimes interfere

with FM station reception even if the FM

station is within 25 miles (40 km). The

strength of the FM signal is directly related

to the distance between the transmitter

and receiver. FM signals follow a line-of-

sight path, exhibiting many of the same

characteristics as light. For example, they

will reflect off objects.

Fade and drift: As your vehicle moves

away from a station transmitter, the

Condition:

3-2

(47,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

signals will tend to fade and/or drift.

Static and flutter: During signal interfer-

ence from buildings, large hills or due to

antenna position, usually in conjunction

with increased distance from the station

transmitter, static or flutter can be heard.

This can be reduced by lowering the treble

setting to reduce the treble response.

Multipath reception: Because of the re-

flective characteristics of FM signals, di-

rect and reflected signals reach the

receiver at the same time. The signals

may cancel each other, resulting in mo-

mentary flutter or loss of sound.

AM radio reception

AIVINJN1-F3C8ECE4-EFC7-4ED4-9553-9C805FE5ED54

AM signals, because of their low fre-

quency, can bend around objects and skip

along the ground. In addition, the signals

can bounce off the ionosphere and be

bent back to earth. Because of these

characteristics, AM signals are also sub-

ject to interference as they travel from

transmitter to receiver.

Fading: Occurs while the vehicle is passing

through freeway underpasses or in areas

with many tall buildings. It can also occur

for several seconds during ionospheric

turbulence even in areas where no ob-

stacles exist.

Static: Caused by thunderstorms, electri-

cal power lines, electric signs and even

traffic lights.

HD Radio

Technology reception

(if so equipped)

AIVINJN1-633FD57A-547D-47B6-A341-C9B5BFCD27BD

HD Radio Technology reception needs to

be activated to receive HD Radio broad-

casts.

“Radio Menu” (page 3-23)

This enables you to receive radio broad-

casts digitally (where available), providing

a better quality sound with clear recep-

tion. When this feature is not activated or

HD Radio broadcasts are not available,

you will receive analog radio (AM/FM)

broadcasts.

Satellite radio reception

AIVINJN1-2273FD6D-FB06-452C-998D-A63512E7162F

When the satellite radio is used for the first

time or the battery has been replaced, the

satellite radio may not work properly. This

is not a malfunction. Wait more than 10

minutes with the satellite radio ON and

the vehicle outside of any metal or large

building for the satellite radio to receive all

of the necessary data.

SiriusXM® services require a subscription

after trial period and are sold separately

or as a package. The satellite service is

available only in the 48 contiguous USA

and DC. SiriusXM® satellite service is also

available in Canada; see www.siriusxm.ca.

The satellite radio performance may be

affected if cargo carried on the roof blocks

the satellite radio signal.

If possible, do not put cargo near the

satellite antenna.

A buildup of ice on the satellite radio

antenna can affect satellite radio perfor-

mance. Remove the ice to restore satellite

radio reception.

3. Audio system

Condition:

3-3

(48,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

3. Audio system

COMPACT DISC (CD) PLAYER (if so

equipped)

AIVINJN1-DC5E2611-026D-452C-A4AC-47F0F8806FC5

SAA0480

.Do not force a CD into the CD slot. This

could damage the CD and/or CD

player.

.Trying to load a CD with the CD door

closed could damage the CD and/or

CD player.

.During cold weather or rainy days, the

player may malfunction due to the

humidity. If this occurs, remove the CD

and dehumidify or ventilate the player

completely.

.The player may skip while driving on

rough roads.

.The CD player sometimes cannot

function when the passenger com-

partment temperature is extremely

high. Decrease the temperature before

use.

.Only use high quality 4.7 in (12 cm)

round discs that have the “COMPACT

disc DIGITAL AUDIO” logo on the disc or

packaging.

.Do not expose the CD to direct sun-

light.

.CDs that are of poor quality, dirty,

scratched, covered with fingerprints

or that have pin holes may not work

properly.

.The following CDs may not work

properly:

— Copy control compact discs (CCCD)

— Recordable compact discs (CD-R)

— Rewritable compact discs (CD-RW)

.Do not use the following CDs as they

may cause the CD player to malfunc-

tion.

— 3.1 in (8 cm) discs

— CDs that are not round

— CDs with a paper label

— CDs that are warped, scratched, or

have abnormal edges

.This audio system can only play pre-

recorded CDs. It has no capabilities to

record or burn CDs.

.If the CD cannot be played, one of the

following messages will be displayed.

Disc read error:

Indicates a CLV, Focus, TOC or Access

error. Check and reinsert the CD. Make

sure that it is inserted correctly.

Please eject disc:

Indicates a mechanism error. If the CD

can be ejected, eject and reinsert the

CD. If the CD cannot be ejected, it is

recommended you visit a NISSAN deal-

er for service.

Unplayable file:

Indicates that a readable file is not

Condition:

3-4

(49,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

found on the inserted CD. Check the

data in your CD.

USB (Universal Serial Bus) CON-

NECTION PORT

AIVINJN1-B14770CC-B357-4196-BAA4-5BEF948ED871

WARNING

AIVINJN1-D638FED5-E54C-411B-A0EC-FC59085277A5

Do not connect, disconnect or operate

the USB device while driving. Doing so

can be a distraction. If distracted you

could lose control of your vehicle and

cause an accident or serious injury.

CAUTION

AIVINJN1-29BDBF9A-FCE3-40F6-9211-F2C802EB06DC

.Do not force the USB device into

the USB connection port. Inserting

the USB device tilted or up-side-

down into the port may damage

the port. Make sure that the USB

device is connected correctly into

the USB connection port.

.Do not grab the USB connection

port cover (if so equipped) when

pulling the USB device out of the

port. This could damage the port

and the cover.

.Do not leave the USB cable in a

place where it can be pulled unin-

tentionally. Pulling the cable may

damage the port.

The vehicle is not equipped with a USB

device. USB devices should be purchased

separately as necessary.

This system cannot be used to format

USB devices. To format a USB device, use a

personal computer.

This system supports various USB mem-

ory devices, USB hard drives and iPod®

players. Some USB devices may not be

supported by this system.

.Partitioned USB devices may not be

played correctly.

.Some characters used in other lan-

guages (Chinese, Japanese, etc.) are

not displayed properly on the display.

Using English language characters

with a USB device is recommended.

General notes for USB use:

Refer to your device manufacturer’s own-

er information regarding the proper care

of the device.

Notes for iPod® use:

iPod® is a trademark of Apple Inc., regis-

tered in the U.S. and other countries.

.Improperly plugging in the iPod® may

cause a checkmark to be displayed on

and off (flickering). Always make sure

that the iPod® is connected properly.

.Audiobooks may not play in the same

order as they appear on an iPod®.

COMPRESSED AUDIO FILES (MP3/

WMA/AAC)

AIVINJN1-59506932-77E0-4626-8C21-4A60DD222070

Explanation of terms

AIVINJN1-EB91730C-D0C7-441C-9028-C9C6F27A417B

.MP3 — MP3 is short for Moving Pictures

Experts Group Audio Layer 3. MP3 is

the most well-known compressed di-

gital audio file format. This format

allows for near “CD quality” sound,

but at a fraction of the size of normal

audio files. MP3 conversion of an audio

track can reduce the file size by

approximately a 10:1 ratio (Sampling:

44.1 kHz, Bit rate: 128 kbps) with

virtually no perceptible loss in quality.

The compression reduces certain

parts of sound that seem inaudible to

most people.

.WMA — Windows Media Audio (WMA) is

a compressed audio format created by

Microsoft as an alternative to MP3. The

WMA codec offers greater file com-

pression than the MP3 codec, enabling

storage of more digital audio tracks in

the same amount of space when

compared to MP3s at the same level

of quality.

3. Audio system

Condition:

3-5

(50,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

3. Audio system

.Bit rate — Bit rate denotes the number

of bits per second used by a digital

music file. The size and quality of a

compressed digital audio file is deter-

mined by the bit rate used when

encoding the file.

.Sampling frequency — Sampling fre-

quency is the rate at which the sam-

ples of a signal are converted from

analog to digital (A/D conversion) per

second.

.Multisession — Multisession is one of

the methods for writing data to media.

Writing data once to the media is

called a single session, and writing

more than once is called a multises-

sion.

.ID3/WMA tag — The ID3/WMA tag is the

part of the encoded MP3 or WMA file

that contains information about the

digital music file such as song title,

artist, album title, encoding bit rate,

track time duration, etc. ID3 tag in-

formation is displayed on the Album/

Artist/Track title line on the display.

.AAC — Advanced Audio Coding (AAC) is

a compressed audio format. AAC of-

fers greater file compression than MP3

and enables music file creation and

storage at the same quality as MP3.

Playback order

AIVINJN1-2A8E94F5-2F22-4C97-ACEA-E869F1816CEF

SAA2494

.The folder names of folders not con-

taining compressed audio files are not

shown on the display.

.The playback order is the order in

which the files were written by the

writing software, so the files might not

play in the desired order.

.Music playback order of compressed

audio files is as illustrated.

Condition:

3-6

(51,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Specification chart for CD (if so equipped)

AIVINJN1-AAC8B434-0F38-48A8-87BC-ED7696C5F421

Supported media CD, CD-R*5, CD-RW*5

Supported file systems CD, CD-R*5, CD-RW*5

Supported ver-

sions*1

MP3

Version MPEG1 Audio Layer3, MPEG2 Audio Layer3

Sampling frequency MPEG1 Audio Layer3: 32kHz, 44.1kHz, 48kHz

MPEG2 Audio Layer3: 16kHz, 22.05kHz, 24kHz

Bit rate MPEG1 Audio Layer3: 32 kbps - 320 kbps

MPEG2 Audio Layer3: 8 kbps - 160 kbps

WMA*2

Version WMA7, WMA8, WMA9, WMA9.1, WMA9.2

Bit rate/Sampling fre-

quency

Bit rate: Ver7, Ver8: 32-192kbps Ver9,Ver9.1,Ver9.2:32-192kbps, VBR

Sampling frequency: Ver7, Ver8:8k/11.025k/16k/22k/32k/44.1k Ver9,Ver9.1,

Ver9.2:8k/11.025k/16k/22k/32k/44.1k/48 kHz

AAC*3 Bit rate/Sampling fre-

quency

Bit rate: 8-256 kbps, VBR

Sampling frequency: 11.025-48kHz

Tag information (Song title, Artist name and Album

name)

ID3 tag VER1.0, VER1.1, VER2.2, VER2.3, VER2.4 (MP3 only)

WMA tag (WMA only)

AAC tag (AAC only)

Folder levels CD, CD-R*5, CD-RW*5: Folder levels: 8, Folders: 255 (including root folder), Files: 510

(Max. 255 files for one folder)

Displayable character codes*4 01: SHIFT-JIS, ASCII, ISO-8859-1, UTF-8, UTF-16 BOM, UTF-16 Big Endian, UTF-16 Little

Endian, 02: UNICODE, 03: UTF-16

*1 Files created with a combination of 48 kHz sampling frequency and 64 kbps bit rate cannot be played.

*2 Protected WMA files (DRM) cannot be played.

*3 Made by iTunes.

3. Audio system

Condition:

3-7

(52,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

3. Audio system

*4 Available codes depend on what kind of media, versions and information are going to be displayed.

*5 May not be operated with the Voice Recognition System.

“7. Voice recognition”

Specification chart for USB

GUID-6D2C4A13-89EC-4642-A614-FF0B956F762C

Supported media USB2.0

Supported file systems FAT16, FAT32

Folder levels Folder levels: 8, Files via folder: 255, Folders: 512 (including root folder), Files: 8000

Tag information (Song title, Artist name and

Album name)

ID3 tag VER1.0, VER1.1, VER2.2, VER2.3, VER2.4 (MP3 only)

WMA tag (WMA only)

AAC tag (AAC only)

Format Sampling frequency Supported bitrate

MP3 *1 MPEG1 Layer-3 32, 44.1, 48 kHz 32-320 kbps

MPEG2 16, 22.05, 24 kHz 8-160 kbps

WMA *2 8, 11.025, 16 ,22.05, 32, 44.1, 48 kHz 12-192 kbps

AAC (MPEG4) *3 (Extension “m4a” only) 11.025, 16, 22.05, 32, 44.1, 48 kHz 8-320 kbps

FLAC 8-192 kHz 128 kbps - 12,288 Mbps

Wav 8-192 kHz 128 kbps - 12,288 Mbps

*1 MPEG2.5 is not supported.

*2 WMA7, WMA8, WMA9, WMA9.1, WMA9.2 are supported. (WMA9 Professional, Lossless, Voice are not supported.)

*3 Only AAC files encoded by iTunes are supported. HE-AAC (High-Efficiency) is not supported.

Condition:

3-8

(53,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

BLUETOOTH® AUDIO

AIVINJN1-24BDA0F9-283E-4615-995E-7F61FFF7F7B7

.Some Bluetooth® audio devices may

not be recognized by the in-vehicle

audio system.

.It is necessary to set up the wireless

connection between a compatible

Bluetooth® audio device and the in-

vehicle Bluetooth® module before

using the Bluetooth® audio.

.The Bluetooth® audio may stop play-

ing when

— receiving a hands-free call.

— checking the connection to the

hands-free phone.

— connecting the hands-free phone or

the audio device.

— downloading the phonebook mem-

ory from the connected cellular

phone.

.Do not place a Bluetooth® audio de-

vice in an area surrounded by metal or

far away from the in-vehicle Blue-

tooth® module to prevent tone quality

degradation and wireless connection

disruption.

.While an audio device is connected

through a Bluetooth® wireless con-

nection, the battery of the device

may discharge quicker than usual.

.This system supports the Bluetooth®

Advanced Audio Distribution Profile

(A2DP) and Audio/Video Remote Con-

trol Profile (AVRCP).

.Wireless LAN (Wi-Fi) and the Blue-

tooth® functions share the same fre-

quency band (2.4 GHz). Using the

Bluetooth® and the wireless LAN func-

tions at the same time may slow down

or disconnect the communication and

cause undesired noise. It is recom-

mended that you turn off the wireless

LAN (Wi-Fi) when using the Bluetooth®

functions.

3. Audio system

Condition:

3-9

(54,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

3. Audio system

NAMES AND FUNCTIONS OF

AUDIO CONTROL BUTTONS

AIVINJN1-AABAE45E-5D0B-46C4-B8C5-63D6B3725503

AUDIO MAIN BUTTONS (Type A) (if so equipped)

AIVINJN1-BF54B88E-4C49-415B-A092-1CE4DFB2AE85

5GA0199X< >:

Push to eject a CD.

CD slot:

Insert a CD with the label side facing

up.

< >/< >:

Use the buttons to select and rewind/

fast-forward tracks and to tune radio

stations/channels.

<AUDIO>:

Push to display the audio screen.

Push again to display the audio

source menu screen.

“Selecting audio source”

(page 3-17)

<VOLUME/ >:

Push to turn on/off the audio system.

The audio system can also be turned

on if the button is turned when the

system is turned off.

Turn to adjust the volume.

<TUNE·SCROLL/OK>:

Turn to manually tune AM/FM, to

select SiriusXM® channels or MP3/

WMA/AAC folders.

Push to select the highlighted item

when a menu screen is displayed.

When this button is pushed when no

item on the screen is highlighted, the

audio settings can be adjusted.

“Audio adjustments with audio

adjust bar” (page 3-41)

<BACK>:

Depending on the screen, pushing the

button will display the previous

screen.

Condition:

3-10

(55,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

AUDIO MAIN BUTTONS (Type B) (if so equipped)

GUID-3C6A75DC-18A9-48EC-8194-3CFABD9932FD

5GA0255X<AUDIO>:

Push to display the audio screen.

Push again to display the audio

source menu screen.

“Selecting audio source”

(page 3-17)

<VOL/ >:

Push to turn on/off the audio system.

The audio system can also be turned

on if the button is turned when the

system is turned off.

Turn to adjust the volume.

< >/< >:

Use the buttons to select and rewind/

fast-forward tracks and to tune radio

stations/channels.

<BACK>:

Depending on the screen, pushing the

button will display the previous

screen.

<TUNE·SCROLL/SOUND>:

Turn to manually tune AM/FM, to

select SiriusXM® channels or MP3/

WMA/AAC folders.

Push to select the highlighted item

when a menu screen is displayed.

When this button is pushed when no

item on the screen is highlighted, the

audio settings can be adjusted.

“Audio adjustments with audio

adjust bar” (page 3-41)

3. Audio system

Condition:

3-11

(56,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

3. Audio system

AUDIO MAIN BUTTONS (Type C) (if so equipped)

GUID-1149B7D9-5415-4959-B236-B814B7A0149B

5GH0881X<AUDIO>:

Push to display the audio screen.

Push again to display the audio

source menu screen.

“Selecting audio source”

(page 3-17)

< >/< >:

Use the buttons to select and rewind/

fast-forward tracks and to tune radio

stations/channels.

< >:

Depending on the screen, pushing the

button will display the previous

screen.

<VOL/ >:

Push to turn on/off the audio system.

The audio system can also be turned

on if the button is turned when the

system is turned off.

Turn to adjust the volume.

Condition:

3-12

(57,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

AUDIO MAIN BUTTONS (Type D) (if so equipped)

GUID-434D52F1-88A3-4734-B583-049CEA5B02F3

5GH0883X<VOL/ >:

Push to turn on/off the audio system.

The audio system can also be turned

on if the button is turned when the

system is turned off.

Turn to adjust the volume.

< >/< >:

Use the buttons to select and rewind/

fast-forward tracks and to tune radio

stations/channels.

<AUDIO>:

Push to display the audio screen.

Push again to display the audio

source menu screen.

“Selecting audio source”

(page 3-17)

< >:

Depending on the screen, pushing the

button will display the previous

screen.

<TUNE·SCROLL/SOUND>:

Turn to manually tune AM/FM, to

select SiriusXM® channels or MP3/

WMA/AAC folders.

Push to select the highlighted item

when a menu screen is displayed.

When this button is pushed when no

item on the screen is highlighted, the

audio settings can be adjusted.

“Audio adjustments with audio

adjust bar” (page 3-41)

3. Audio system

Condition:

3-13

(58,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

3. Audio system

AUDIO MAIN BUTTONS (Type E) (if so equipped)

GUID-E55E903B-7601-41C0-8220-187FF99DC22A

5GH0882X< >:

Push to eject a CD.

<VOLUME/ >:

Push to turn on/off the audio system.

The audio system can also be turned

on if the button is turned when the

system is turned off.

Turn to adjust the volume.

<AUDIO>:

Push to display the audio screen.

Push again to display the audio

source menu screen.

“Selecting audio source”

(page 3-17)

CD slot:

Insert a CD with the label side facing

up.

<TUNE·SCROLL/OK>:

Turn to manually tune AM/FM, to

select SiriusXM® channels or MP3/

WMA/AAC folders.

Push to select the highlighted item

when a menu screen is displayed.

When this button is pushed when no

item on the screen is highlighted, the

audio settings can be adjusted.

“Audio adjustments with audio

adjust bar” (page 3-41)

<BACK>:

Depending on the screen, pushing the

button will display the previous

screen.

< >/< >:

Use the buttons to select and rewind/

fast-forward tracks and to tune radio

stations/channels.

AUDIO CONTROL STEERING

WHEEL SWITCHES (Type A) (if so

equipped)

AIVINJN1-8D8B77B0-542F-4040-8910-08948E84EDF4

5GA0187X

< > (Volume control):

Push the + or - side of the switch to

adjust the volume.

< >/< >:

Use the switches for audio operations.

“Audio operations” (page 3-17)

Condition:

3-14

(59,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

INFO:

Steering wheel switches are mainly for the

vehicle information display control and

may not be able to operate the touch

screen display depending on the condi-

tions.

AUDIO CONTROL STEERING

WHEEL SWITCHES (Type B) (if so

equipped)GUID-1CAC6B0E-58EB-4904-9007-172BACA5AC29

5GH0884X

<SOURCE>:

Push to change the audio source on

the vehicle information display.

</>:

Use the switch for audio operations.

“Audio operations” (page 3-17)

< > (Volume control):

Push the + or - side of the switch to

adjust the volume.

INFO:

Steering wheel switches are mainly for the

vehicle information display control and

may not be able to operate the touch

screen display depending on the condi-

tions.

AUDIO CONTROL STEERING

WHEEL SWITCHES (Type C) (if so

equipped) GUID-FB863EA1-DF80-4145-B262-8433C97B4055

5GH0900X

</>:

Use the switch for audio operations.

“Audio operations” (page 3-17)

<SOURCE>:

Push to change the audio source on

the vehicle information display.

< > (Volume control):

Push the + or - side of the switch to

adjust the volume.

INFO:

Steering wheel switches are mainly for the

vehicle information display control and

may not be able to operate the touch

screen display depending on the condi-

tions.

AUDIO CONTROL STEERING

WHEEL SWITCHES (Type D) (if so

equipped) GUID-65B5F1AF-F195-4EEB-8182-F7329DA0C909

5GH0901X

3. Audio system

Condition:

3-15

(60,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

3. Audio system

<SOURCE>:

Push to change the audio source on

the vehicle information display.

</>:

Use the switch for audio operations.

“Audio operations” (page 3-17)

< > (Volume control):

Push the + or - side of the switch to

adjust the volume.

INFO:

Steering wheel switches are mainly for the

vehicle information display control and

may not be able to operate the touch

screen display depending on the condi-

tions.

AUDIO CONTROL STEERING

WHEEL SWITCHES (Type E) (if so

equipped) GUID-8D509D9E-6532-4FB1-ADEE-28AD9D1F1699

5GH0885X

<SOURCE>:

Push to change the audio source on

the vehicle information display.

</>:

Use the switch for audio operations.

“Audio operations” (page 3-17)

< > (Volume control):

Push the + or - side of the switch to

adjust the volume.

INFO:

Steering wheel switches are mainly for the

vehicle information display control and

may not be able to operate the touch

screen display depending on the condi-

tions.

AUDIO CONTROL STEERING

WHEEL SWITCHES (Type F) (if so

equipped) GUID-7692238F-1D1F-4DD8-991F-50D3DA57FEC5

5GA0291X

<SOURCE>:

Push to change the audio source on

the vehicle information display.

</>:

Use the switch for audio operations.

“Audio operations” (page 3-17)

Condition:

3-16

(61,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

< > (Volume control):

Push the + or - side of the switch to

adjust the volume.

INFO:

Steering wheel switches are mainly for the

vehicle information display control and

may not be able to operate the touch

screen display depending on the condi-

tions.

AUDIO OPERATIONS

AIVINJN1-8910DA01-FA52-4035-BC56-AEEA46A2B06E

AUDIO MAIN OPERATION

AIVINJN1-21A3D1F2-D88E-4CCE-B170-B9485A368E7F

Turning audio system on/off

AIVINJN1-DEC1D39C-0B79-4535-9FBF-86BD31187CDD

The ignition switch must be in the ACC or

ON position to turn on the audio system.

Push <VOLUME/ >/<VOL/ > or

<AUDIO> to turn on the last audio source

that was playing immediately before the

system was turned off. To turn off the

audio system, push <VOLUME/

>/<VOL/ > again.

INFO:

The audio system can also be turned on

by turning <VOLUME/ >/<VOL/ >

when the system is turned off.

Selecting audio source

AIVINJN1-2A84B441-03C2-4E17-9A89-AC3DD54D9273

Selecting from source menu screen:

5GA0188X

Example

1. Push <AUDIO> when the audio screen

is displayed.

2. Select an audio source you prefer to

play.

INFO:

.Touching [Source] on the upper left

corner of the audio screen will also

display the audio source menu screen.

.The audio source can also be changed

by operating the vehicle information

display. Refer to the vehicle Owner’s

Manual for the detail of the vehicle

information display.

3. Audio system

Condition:

3-17

(62,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

3. Audio system

Selecting from Launch Bar:

5GA0189X

Example

The source icons are displayed on the

Launch Bar. Touch the icon to select the

preferred audio source.

Customizing Launch Bar:

The source icons displayed in the Launch

Bar can be customized.

5GA0256X

Example

1. Push <AUDIO> or touch [Source], while

the Audio screen is displayed.

2. Touch [Customize Audio Sources].

3. Drag the preferred source icon to the

Launch Bar.

4. Push <BACK>/<>on the control

panel or touch [ ] to confirm the

setting.

INFO:

[Customize Audio Sources] can also be

accessed from [Settings] on the

Launch Bar.

“System settings” (page 2-23)

Condition:

3-18

(63,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

RADIO AIVINJN1-952EDDB7-2BDB-4ADF-BF9F-C1407C8FAA3E

How to view radio screen

AIVINJN1-C7E211CC-F05B-44A2-86A6-770B8278B318

AM/FM screen:

5GA0191X

[AM Menu]/[FM Menu]:

Touch to display the radio menu

screen.

“Radio Menu” (page 3-23)

[Source]:

Touch to switch to the source menu

screen.

“Selecting audio source”

(page 3-17)

Audio source indicator:

Indicates the currently selected audio

source.

Reception information display:

Reception information currently avail-

able such as frequency, station name,

etc. is displayed.

Album artwork (if so equipped)/turn

direction indicator (if so equipped):

When a navigation route is set, turn-

ing direction and the distance to the

next turn are displayed.

When in the HD Radio mode (if so

equipped), images or album artworks

are displayed by the currently playing

station.

Preset list:

To listen to a preset station, touch the

corresponding station from the pre-

3. Audio system

Condition:

3-19

(64,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

3. Audio system

set list. If displayed, touch [ < ] or [ > ] to

scroll the preset list.

Touch and hold one of the keys in the

preset list to store the currently play-

ing station to that key location.

“Presetting” (page 3-22)

HD Radio mode on/off key (if so

equipped):

The HD Radio mode turns on and the

indicator comes on by touching it

while the AM or FM radio screen is

displayed.

INFO:

HD Radio (if so equipped) reception needs

to be enabled to receive HD Radio broad-

casts. This enables you to receive radio

broadcasts digitally (where available), pro-

viding a better quality sound with clear

reception. When this feature is not en-

abled or HD Radio broadcasts are not

available, you will receive analog radio

(AM/FM) broadcasts.

SiriusXM® screen:

5GA0192X

Condition:

3-20

(65,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

[SXM Menu]:

Touch to display the SiriusXM® menu

screen.

“Radio Menu” (page 3-23)

[Source]:

Touch to switch to the source menu

screen.

“Selecting audio source”

(page 3-17)

Sports Flash indicator:

An indicator will be displayed when

sports information is available for pre-

registered sports teams. The indicator

color signifies the current status:

Gray No Sports Flash audio is

available yet, or Sports

Flash monitoring is deac-

tivated.

White Sports Flash monitoring is

activated, but favorite

teams are not playing

games.

Light green Favorite teams are playing

games.

Orange Replaying (listening to)

Sports Flash audio.

Sports Flash is not available for models

without navigation system and the indi-

cator is always grayed out.

Audio source indicator:

Indicates the currently selected audio

source.

Reception information display:

The channel logo will indicate the

currently tuned channel name. Also

the channel number, artist and title of

the currently played song is displayed.

Channel artwork:

Images or album artwork displayed

by the currently playing channel.

When a route is set, turn direction

indicator will be displayed (models

with navigation system).

[Replay]:

Up to 60 minutes of the broadcast of

the currently playing channel can be

replayed. Touching [Presets] will re-

turn to current SiriusXM® reception.

Traffic & Weather Now (TWN) indica-

tor:

An indicator will be displayed when

SiriusXM Traffic

and SiriusXM®

Weather information are available for

pre-registered cities. The indicator

color signifies the current status:

Gray TWN audio is loading, or no

city has been defined yet.

White Already listened to current

TWN audio information.

Light green New TWN audio informa-

tion is available.

Orange Playing TWN audio infor-

mation.

The information can be played by touch-

ing the indicator when the indicator is

light green.

TWN is not available for models without

navigation system and the indicator is

always grayed out.

Preset list:

To listen to a preset channel, touch

the corresponding channel from the

preset list. Touch [ < ] or [ > ] to scroll

the preset list. Touch and hold one of

the keys in the preset list to store the

currently playing station to that key

location.

“Presetting” (page 3-22)

Mode indicator:

Displays the current play mode. "Live

Mode" or "Replay Mode" will be dis-

played.

3. Audio system

Condition:

3-21

(66,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

3. Audio system

INFO:

The SiriusXM® Audio function will not

operate without a subscription to Sir-

iusXM® Satellite Radio.

Radio operation

AIVINJN1-70A6C418-6C6D-4604-A521-AA2E6BCD59DC

Radio activation and band selection:

To listen to the radio, turn on the audio

system and select a preferred radio band.

“Selecting audio source” (page 3-17)

INFO:

When the stereo broadcast signal is weak,

the radio will automatically change from

stereo to monaural reception.

Tuning (if so equipped):

AM/FM

To tune to stations manually, turn <TU-

NE·SCROLL/OK>/<TUNE·SCROLL/

SOUND> (if so equipped).

SiriusXM® Audio

To tune to channels, push <>/< > on

the control panel or turn <TUNE·SCROLL/

OK>/<TUNE·SCROLL/SOUND> (if so

equipped).

Fast tuning:

Push and hold <>/< > on the control

panel to fast tune to stations/channels.

Seek tuning:

When in AM or FM mode, push

<>/< > on the control panel, tilt and

hold </>(if so equipped) or push

and hold <>/< > (if so equipped) on

the steering wheel to seek up/down to

the next receivable broadcast station.

Presetting:

Up to 6 for AM, 12 for FM and 18 for

SiriusXM® stations/channels can be regis-

tered in the preset list.

1. Select a radio band (AM, FM or Sir-

iusXM®).

2. Tune to the station/channel you wish

to store.

3. Touch and hold one of the preset

numbers in the preset list.

The information such as frequency (AM/

FM), channel number (SiriusXM®), etc. will

be displayed on the preset list.

To select and listen to the preset stations/

channels, tilt </>(if so equipped) or

push <>/< > (if so equipped) on the

steering wheel briefly or touch a preferred

station/channel on the preset list on the

radio screen.

Condition:

3-22

(67,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Radio Menu

AIVINJN1-D950716C-9E53-45AA-A4AF-8EC5B4A2CD6E

Touch [FM Menu], [AM Menu], and [SXM Menu] on each radio screen to display the corresponding menu screen.

Available menu items may vary depending on models and specifications.

[FM Menu]/[AM Menu]:

[SCAN] To scan tune the stations, touch [FM Menu] or [AM Menu] on the radio screen and

then touch [SCAN]. The stations will be tuned from low to high frequencies and stop

at each broadcasting station for several seconds. Touching [SCAN] again during this

period of several seconds will stop scan tuning and the radio will remain tuned to

that station.

[Radio Text] Displays the radio text information.

[Refresh] Touch to update the station list displayed on the right side of the FM or AM menu

screen.

[Direct Tune] Touch to select station by entering station number directly. Touch [Return] to

return to the FM or AM screen without any changes.

Station List Displays the station list on the right side of the FM or AM menu screen.

[SXM Menu]:

[Now Playing] Touch to display the SiriusXM® screen.

[Channel List] Touch to display the channel list.

[Direct Tune] Touch to select a channel by entering channel number directly. Touch [Now Playing] to return to the

SiriusXM® screen without any changes.

[Tag Artist] Touch to save the current artist as a favorite.

[Tag Song] Touch to save the current song as a favorite.

[Categories] Touch to select a channel by selecting from the category list.

3. Audio system

Condition:

3-23

(68,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

3. Audio system

[Start Tune Scan] While the audio system is on, all songs playing on the preset channels (up to 12 from the first) are

recorded. Up to one hour of music is recorded for each preset channel.

Touch to scan play the recorded songs for a few seconds (oldest song is played first).

Touch [Play] to stop scanning and select currently played song to replay.

Touch [ ]/[ ] to skip to the next or previous song.

Touch [Abort] to cancel the scanning.

[Favorite Artists: History] Touch to display the favorite artist alert history.

[Favorite Songs: History] Touch to display the favorite song alert history.

[Sports Flash: History] Touch to display the sports flash alert history.

[Edit Favorite Artists] Turn on/off the notification for favorite artists. Touching [Turn All Alerts ON]/[Turn All Alerts OFF] can

turn on/off for all artist at once. Touching [ ] can delete a stored favorite artist and [Delete All Favorites]

deletes all stored artists.

[Edit Favorite Songs] Turn on/off the notification for favorite songs. Touching [Turn All Alerts ON]/[Turn All Alerts OFF] can

turn on/off for all song at once. Touching [ ] can delete a stored favorite song and [Delete All Favorites]

deletes all stored songs.

[Edit Sports Flash Teams] Turn on/off the notification for a favorite team. Touching [Turn All Alerts ON]/[Turn All Alerts OFF] can

turn on/off for all team at once. Touching [ ] can delete a stored favorite team. [Add Team] can add a

new favorite team to the list.

[Edit Favorite TWN City] Touch to select a city from the list. Traffic & Weather Now (TWN) provides the traffic and weather

information for the selected city and nearby area by touching the Traffic & Weather Now indicator on

the SiriusXM® screen.

[Notification Settings] Touch to turn on/off the notifications for Artists, Songs, and Sports Flash.

Turning on [Alerts on Non-Audio Screens] can also display the notification on menu screens other than

the audio screen.

[Customize Channel List] Touch to customize the channel list. Only the selected channels will be tuned in to when you seek or

scan the channels. You can select each item or select [Disable All Channels]/[Enable All Channels]. You

can also turn on/off [Mature Channels].

[Tune Start] Touch to turn on/off the Tune Start feature. This feature buffers the content playing on each of the

SiriusXM® preset channels, so that when a preset channel is selected, the currently playing song always

starts playing from the beginning.

Condition:

3-24

(69,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

INFO:

.SiriusXM® Audio requires a subscrip-

tion after trial period and are sold

separately or as a package. The satel-

lite service is available only in the 48

contiguous USA and DC. SiriusXM®

satellite service is also available in

Canada; see www.siriusxm.ca.

.It may take some time to receive the

activation signal after the initiation of

the SiriusXM® Satellite Radio subscrip-

tion. After receiving the activation

signal, an available channel list will

automatically be updated in the radio.

Change the position of the ignition

switch from LOCK to ACC to update

the SiriusXM® channel list.

COMPACT DISC (CD) PLAYER (if so equipped)

AIVINJN1-A28D720F-2D75-4FE8-83A3-198D5B21527C

How to view CD screen

AIVINJN1-E902B692-E481-4875-91FE-430C4B4967C6

5GA0193X

3. Audio system

Condition:

3-25

(70,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

3. Audio system

[CD Menu]:

Touch to display the CD Menu screen.

“CD Menu” (page 3-27)

[Source]:

Touch to switch to the source menu

screen.

“Selecting audio source”

(page 3-17)

Track information:

Track information such as the song

name, artist name and album name

are displayed.

Audio source indicator:

Indicates that CD is the currently

selected audio source.

Play time and progress bar:

The play time of the track is displayed.

The bar indicates the progress in

playing the current track.

Album artwork/turn direction indica-

tor (if so equipped):

When a route is not set, album art-

work will be displayed.

When a navigation route is set, turn-

ing direction and the distance to the

next turn are displayed.

CD operation keys:

Touch to control CD playback func-

tions.

[ ] Each time [ ] is touched, the

repeat mode changes.

“Changing play mode”

(page 3-27)

[] Touch once to return to the

beginning of the current track.

Touch again to select the pre-

vious track. Touch and hold to

rewind the current track.

[] Touch to play the track.

[] Touch to pause the track.

[] Touch to select the next track.

Touch and hold to fast-forward

the track.

[] Each time [ ] is touched, the

random mode changes.

“Changing play mode”

(page 3-27)

CD player operation

AIVINJN1-28CAF061-63D9-4EF3-8A20-5A9D2E94AB19

Loading:

Insert a CD into the slot with the label side

facing up. The CD will be guided auto-

matically into the slot and start playing.

Activation and playing:

The CD mode can also be selected from

the source list with a CD loaded.

“Selecting audio source” (page 3-17)

Skipping tracks:

To skip the tracks, push <>/< > on

the control panel, touch [ ]/[ ] on the

screen, tilt </>(if so equipped) or

push <>/< > (if so equipped) on the

steering wheel repeatedly until preferred

track is selected.

INFO:

Depending on the condition, skipping to

the previous track may require pushing

the button or touching the key twice.

Pushing the button or touching the key

once may only restart the current track

from the beginning.

Changing folders:

To change folders, touch [CD Menu].

“CD Menu” (page 3-27)

Turn <TUNE·SCROLL/OK> to skip to dif-

ferent folders. If no folders are found,

tracks will be skipped.

Condition:

3-26

(71,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Rewinding/fast-forwarding:

To rewind or fast-forward the track, push

and hold <>/< > on the control

panel, touch and hold [ ]/[ ] on the

screen, tilt and hold </>(if so

equipped) or push and hold <>/< >

(if so equipped) on the steering wheel.

Changing play mode:

Repeat mode

Touch [ ] on the CD screen to change

the repeat mode. The following modes are

available.

.CD

[All]: Repeat Album

[Track]: Repeat track

No text displayed: Repeat off

.CD with compressed audio files

[All]: Repeat all

[Folder]: Repeat folder/sub-folder

[Track]: Repeat track

No text displayed: Repeat off

Random mode

Touch [ ] on the CD screen to change

the random mode.

No text displayed: Random off

[Random]: Random play

Ejecting CD:

Push <>to eject a CD. If the CD is

ejected and left unremoved, it will be

reloaded into the slot for protection.

INFO:

The ignition switch must be placed in the

ACC or ON position in order for the CD to

eject.

CD Menu

AIVINJN1-BD38972D-E8A7-43E7-A28D-CE746107BE8D

Touch [CD Menu] on the CD screen to

display the CD menu screen.

The following items are available.

[Now Playing] Touch to display the CD

screen.

Folder* and

track list

The track list for the se-

lected folder is displayed.

The name of sub folder is

displayed on the top of the

list if the sub holder is

included in the selected

folder.

Touch an item on the list to

select the folder or track.

Touch [ ] and go back to

the previous screen.

*: Displayed only when available.

3. Audio system

Condition:

3-27

(72,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

3. Audio system

USB MEMORY DEVICE PLAYER

AIVINJN1-4ECBAE05-C74A-4D4B-B183-1F4933C3C92B

Connecting USB memory device

AIVINJN1-8B4A7CDA-0428-4D60-A67E-D4AD0C453CB2

WARNING

AIVINJN1-7C36272E-AE1E-43BA-94B2-1E6C0F2EAB4A

Do not connect, disconnect or operate

the USB device while driving. Doing so

can be a distraction. If distracted you

could lose control of your vehicle and

cause an accident or serious injury.

CAUTION

AIVINJN1-CB76B5B0-513A-4CC4-AA5C-3FE7C3714282

.Do not force the USB device into

the USB connection port. Inserting

the USB device tilted or up-side-

down into the port may damage

the port. Make sure that the USB

device is connected correctly into

the USB connection port.

.Do not grab the USB connection

port cover (if so equipped) when

pulling the USB device out of the

port. This could damage the port

and the cover.

.Do not leave the USB cable in a

place where it can be pulled unin-

tentionally. Pulling the cable may

damage the port.

Refer to your device manufacturer’s own-

er information regarding the proper use

and care of the device.

When compatible storage devices are

plugged into the port, compatible audio

files on the storage devices can be played

through the vehicle’s audio system.

For the location of the USB connection

port:

“USB (Universal Serial Bus) connec-

tion port and AUX (auxiliary) input

jack” (page 2-14)

Condition:

3-28

(73,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

How to view USB screen

AIVINJN1-E9144E87-0DC7-4702-9C76-7699BDDE627E

5GA0194X

[USB Menu]:

Touch to switch to the USB Menu

screen.

“USB Menu” (page 3-31)

[Source]:

Touch to switch to the source menu

screen.

“Selecting audio source”

(page 3-17)

Track information:

Track information such as the song

name, artist name and album name

are displayed.

Device name indicator:

Indicates the name of the USB device

currently playing.

“Selecting audio source”

(page 3-17)

Album artwork/turn direction indica-

tor (if so equipped):

Image of an album artwork is dis-

played when available if the setting is

turned on.

“USB Menu” (page 3-31)

When the album artwork display

setting is turned off, the turn direction

and the distance to the next turn are

displayed when a route is set (models

with navigation system).

3. Audio system

Condition:

3-29

(74,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

3. Audio system

Play time and progress bar:

The play time of the track is displayed.

The bar indicates the progress in

playing a track.

USB operation keys:

Touch to control USB playback func-

tions.

[ ] Each time [ ] is touched, the

repeat mode changes.

“Changing play mode”

(page 3-30)

[] Touch to return to the begin-

ning of the current track.

Touch again to select the pre-

vious track. Touch and hold to

rewind the current track.

[] Touch to play the track.

[] Touch to pause the track.

[] Touch to select the next track.

Touch and hold to fast-forward

the track.

[] Each time [ ] is touched, the

random mode changes.

“Changing play mode”

(page 3-30)

USB memory device player op-

eration AIVINJN1-D6F756B8-A874-4D4F-BD71-90C3D033F1C0

Activation and playing:

Connecting the USB memory device into

the port will start playing the USB mem-

ory.

USB memory device can also be played by

selecting the source on the audio source

menu screen.

“Selecting audio source” (page 3-17)

To pause playing the USB memory device,

touch [ ]. To resume playing, touch

[].

Selecting search method:

A list of search methods is displayed in the

USB menu.

“USB Menu” (page 3-31)

Skipping tracks:

To skip the tracks, push <>/< > on

the control panel, touch [ ]/[ ] on the

screen, tilt </>(if so equipped) or

push <>/< > (if so equipped) on the

steering wheel repeatedly until preferred

track is selected.

INFO:

Depending on the condition, skipping to

the previous track may require pushing

the button or touching the key twice.

Pushing the button or touching the key

once may only restart the current track

from the beginning.

Changing folders:

To change folders, touch [USB Menu].

“USB Menu” (page 3-31)

Turn <TUNE·SCROLL/OK>/<TUNE·SC-

ROLL/SOUND> (if so equipped) to skip to

different folders.

Rewinding/fast-forwarding:

To rewind or fast-forward the track, push

and hold <>/< > on the control

panel, touch and hold [ ]/[ ] on the

screen, tilt and hold </>(if so

equipped) or push and hold <>/< >

(if so equipped) on the steering wheel.

Changing play mode:

Repeat mode

Touch [ ] on the USB screen to change

the repeat mode. The following modes are

available.

No text displayed: Repeat off

[All]: Repeat all

Condition:

3-30

(75,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

[Folder]: Repeat folder/sub-folder

[Track]: Repeat track

Random mode

Touch [ ] on the screen to change the

random mode as follows.

No text displayed: Random off

[Random]: Random play

USB Menu

AIVINJN1-D7405901-8E6D-4B27-8B77-BD50EA7A85CF

Touch [USB Menu] on the USB screen to

display the USB Menu screen.

The following items are available.

[Now Play-

ing]

Touch to display the USB

screen.

[Folder List]

Touch to display the folder

list. Touch an item on the list

to select the folder.

The sub-folder or track list

will be displayed. Select a

sub-folder or track from the

list.

[Album Art-

work]

Touch to turn on/off the

album artwork display on the

USB screen.

[Playlists] Touch to display the list ac-

cording to the selected item.

[Artists]

[Albums]

[Songs]

[Genres]

[Compo-

sers]

*: Displayed only when available.

3. Audio system

Condition:

3-31

(76,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

3. Audio system

iPod® PLAYER

AIVINJN1-92F97DCC-8A7B-4962-B3EF-B537B5AA8CFE

Connecting iPod®

AIVINJN1-86159E90-EC5B-440C-8A60-183226DEE0E7

WARNING

AIVINJN1-C453A87C-64C0-4767-B2B9-1DFB0071D5E4

Do not connect, disconnect or operate

the USB device while driving. Doing so

can be a distraction. If distracted you

could lose control of your vehicle and

cause an accident or serious injury.

CAUTION

AIVINJN1-C6CBE390-ED4E-4097-B728-0BB7E93ABE0F

.Do not force the USB device into

the USB connection port. Inserting

the USB device tilted or up-side-

down into the port may damage

the port. Make sure that the USB

device is connected correctly into

the USB connection port.

.Do not grab the USB connection

port cover (if so equipped) when

pulling the USB device out of the

port. This could damage the port

and the cover.

.Do not leave the USB cable in a

place where it can be pulled unin-

tentionally. Pulling the cable may

damage the port.

Connect the iPod® to the USB connection

port.

“USB (Universal Serial Bus) connec-

tion port and AUX (auxiliary) input

jack” (page 2-14)

The battery of the iPod® will be charged

while the device is connected to the

vehicle if the iPod® supports charging via

a USB connection.

Depending on the device and firmware

version of the iPod®, the display on the

iPod® shows a NISSAN or Accessory At-

tached screen when the connection is

completed. When the iPod® is connected

to the vehicle, the iPod® music library can

only be operated by the vehicle audio

controls.

iPod® is a trademark of Apple Inc., regis-

tered in the U.S. and other countries.

Compatibility:

Made for

.iPod touch® (6th generation)

.iPod touch® (5th generation)

.iPod nano® (7th generation)

.iPod nano® (6th generation)

.iPod nano® (5th generation)

.iPhone® 6 Plus

.iPhone® 6

.iPhone® 5s

.iPhone® 5c

.iPhone® 5

.iPhone® 4S

INFO:

.Make sure that the iPod® firmware is

updated.

.The Lightning

connector works with

iPhone® (5 through 6 Plus), iPod touch®

(5th and 6th generation), and iPod

nano® (7th generation).

The 30-pin connector works with

iPhone® 4S and iPod nano® (5th and

6th generation).

USB works with iPhone® (4S through 6

Plus), iPod touch® (5th and 6th gen-

eration) and iPod nano® (5th through

7th generation).

.Refer to your device manufacturer’s

owner information regarding the

proper use and care of the device.

Condition:

3-32

(77,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

How to view iPod® screen

AIVINJN1-266AD5A0-1330-4370-8D3C-7E9AB4FC7E8E

5GA0195X

[iPod Menu]:

Touch to display the iPod® Menu

screen.

“iPod® Menu” (page 3-35)

[Source]:

Touch to switch to the source menu

screen.

“Selecting audio source”

(page 3-17)

Track information:

Track information such as the song

name, artist name and album name

are displayed.

Device name indicator:

Indicates the name of the iPod®

currently playing.

Album artwork/turn direction indica-

tor (if so equipped):

Image of an album artwork is dis-

played when available if the setting is

turned on.

“iPod® Menu” (page 3-35)

When the album artwork display

setting is turned off, the turn direction

and the distance to the next turn are

displayed when a route is set (models

with navigation system).

3. Audio system

Condition:

3-33

(78,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

3. Audio system

Play time and progress bar:

The play time of the track is displayed.

The progress bar indicates the pro-

gress in playing the current track.

iPod® operation keys:

Touch to control iPod® playback func-

tions.

[ ] Each time [ ] is touched, the

repeat mode changes.

“Changing play mode”

(page 3-34)

[] Touch to return to the begin-

ning of the current track. Touch

again to select the previous

track. Touch and hold to re-

wind the current track.

[] Touch to play the track.

[] Touch to pause the track.

[] Touch to select the next track.

Touch and hold to fast-forward

the track.

[] Each time [ ] is touched, the

random mode changes.

“Changing play mode”

(page 3-34)

iPod® player operation

AIVINJN1-28BF6832-2085-494B-A4E6-1813413B09C2

Depending on the connected device,

some functions cannot be used.

Activation and playing:

Connecting an iPod® to the vehicle via

USB cable will activate the iPod® mode.

The iPod® can also be played by selecting

the source on the audio source menu

screen.

“Selecting audio source” (page 3-17)

Selecting search method:

A list of search methods is displayed in the

iPod® menu.

“iPod® Menu” (page 3-35)

Skipping tracks:

To skip the tracks, push <>/< > on

the control panel, touch [ ]/[ ] on the

screen, tilt </>(if so equipped) or

push <>/< > (if so equipped) on the

steering wheel repeatedly until preferred

track is selected.

INFO:

Depending on the condition, skipping to

the previous track may require pushing

the button or touching the key twice.

Pushing the button or touching the key

once may only restart the current track

from the beginning.

Turning <TUNE·SCROLL/OK>/<TUNE·SC-

ROLL/SOUND> (if so equipped) while a

track is playing will also skip the tracks.

Rewinding/fast-forwarding:

To rewind or fast-forward the track, push

and hold <>/< > on the control

panel, touch and hold [ ]/[ ] on the

screen, tilt and hold </>(if so

equipped) or push and hold <>/< >

(if so equipped) on the steering wheel.

Changing play mode:

Repeat mode

Touch [ ] on the iPod® screen to change

the repeat mode. The following modes are

available.

No text displayed: Repeat off

[All]: Repeat all

[Track]: Repeat track

Condition:

3-34

(79,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Random mode

Touch [ ] on the screen to change the

random mode as follows.

No text displayed: Random off

[Random]: Random play

iPod® Menu

AIVINJN1-1EDCB51F-8470-481B-BD52-A860687C05EA

Touch [iPod Menu] on the iPod® screen to

display the iPod® menu screen.

The following items are available.

[Now Playing] Touch to display the

iPod® screen.

[Current List] A list of tracks in the

currently selected ca-

tegory is displayed.

To scroll up or down

the list, turn <TU-

NE·SCROLL/OK>/<TU-

NE·SCROLL/SOUND>

(if so equipped).

[Album Artwork] Touch to turn on/off

the album artwork

display on the iPod®

screen.

[Playlists] Touch to display the

list according to the

selected item.

[Artists]

[Albums]

[Songs]

[Genres]

[Composers]

[Audiobooks]

[Podcasts]

BLUETOOTH® AUDIO

AIVINJN1-6D822548-78A4-4D36-B8BE-13EE7D8B3971

Your vehicle is equipped with Bluetooth®

Audio.

If you have a compatible Bluetooth®

device with streaming audio capability

(A2DP profile), you can set up a wireless

connection between your Bluetooth® de-

vice and the in-vehicle audio system. This

connection allows you to listen to the

audio from the Bluetooth® device using

your vehicle speakers. It also may allow

basic control of the device for playing and

skipping audio files using the AVRCP Blue-

tooth® profile. Not all Bluetooth® devices

have the same level of controls for AVRCP.

Please consult the manual for your Blue-

tooth® device for more details.

Wireless LAN (Wi-Fi) and the Bluetooth®

functions share the same frequency band

(2.4 GHz). Using the Bluetooth® and the

wireless LAN functions at the same time

may slow down or disconnect the com-

munication and cause undesired noise. It

is recommended that you turn off the

wireless LAN (Wi-Fi) when using the Blue-

tooth® functions.

Connecting Bluetooth® audio de-

vice AIVINJN1-35FDD5DF-AF21-4074-8409-897CA408B2B2

A Bluetooth® audio device must be con-

nected to the vehicle before operation.

3. Audio system

Condition:

3-35

(80,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

3. Audio system

“Setting Bluetooth®” (page 2-26)

How to view Bluetooth® audio screen

AIVINJN1-7EB7CC01-4D10-4A62-9367-0139FAD07C36

5GA0196X

[BT Menu]/[Connections]:

Depending on the connected device,

either [BT Menu] or [Connections] is

displayed.

Touch [BT Menu] to display the Blue-

tooth® audio menu screen.

“BT Menu” (page 3-38)

Touch [Connections] to display the

connection screen.

“Setting Bluetooth®” (page 2-26)

[Source]:

Touch to switch to the source menu

screen.

“Selecting audio source”

(page 3-17)

Track information:

Track information such as the song

name, artist name and album name

are displayed.

Device name indicator:

Indicates the name of the Bluetooth®

audio device currently playing.

Album artwork (if so equipped)/turn

direction indicator (if so equipped):

Image of an album artwork is dis-

played when available if the setting is

turned on.

“BT Menu” (page 3-38)

Condition:

3-36

(81,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

When the album artwork display

setting is turned off, the turn direction

and the distance to the next turn are

displayed when a route is set (models

with navigation system).

Play time and Progress bar:

The play time of the track is displayed.

The Progress bar indicates the pro-

gress in playing the current track.

Bluetooth® audio operation keys:

Touch to control the Bluetooth®

audio playback function.

[ ] Each time [ ] is

touched, the repeat

mode changes.

“Changing play

mode” (page 3-38)

[] Touch to return to the

beginning of the current

track. Touch again to

select the previous

track. Touch and hold to

rewind the current track.

[] Touch to play the track.

[] Touch to pause the

track.

[] Touch to select the next

track. Touch and hold to

fast-forward the track.

[] Each time [ ] is

touched, the random

mode changes.

“Changing play

mode” (page 3-38)

INFO:

Depending on the audio device that is

connected to the vehicle, track informa-

tion may not be displayed.

Bluetooth® audio operation

AIVINJN1-1383FDB6-EEAE-412C-8E8F-2D0CFC7AD013

The ability to pause, change tracks, fast

forward, rewind, randomize and repeat

music may be different between devices.

Some or all of these functions may not be

supported on each device.

INFO:

Depending on the Bluetooth® audio de-

vice that is connected, it may not be

possible to perform audio operations or

a delay may occur before music is played

back.

Activation and playing:

A Bluetooth® audio device can be played

by selecting the source on the audio

source menu screen.

“Selecting audio source” (page 3-17)

To pause playing the Bluetooth® audio,

touch [ ]. Touch [ ] to resume

playing.

Skipping tracks:

To skip the tracks, push <>/< > on

the control panel, touch [ ]/[ ] on the

screen, tilt </>(if so equipped) or

push <>/< > (if so equipped) on the

steering wheel repeatedly until preferred

track is selected.

3. Audio system

Condition:

3-37

(82,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

3. Audio system

INFO:

Depending on the condition, skipping to

the previous track may require pushing

the button or touching the key twice.

Pushing the button or touching the key

once may only restart the current track

from the beginning.

Turning <TUNE·SCROLL/OK>/<TUNE·SC-

ROLL/SOUND> (if so equipped) while a

track is playing will also skip the tracks.

Changing folders:

To change folders, touch [BT Menu].

“BT Menu” (page 3-38)

Rewinding/fast-forwarding:

To rewind or fast-forward the track, push

and hold <>/< > on the control

panel, touch and hold [ ]/[ ] on the

screen, tilt and hold </>(if so

equipped) or push and hold <>/< >

(if so equipped) on the steering wheel.

Changing play mode:

Repeat mode

Touch [ ] on the screen to change the

repeat mode.

Random mode

Touch [ ] on the screen to change the

random mode.

INFO:

Available repeat/random modes change

depending on the connected device.

BT Menu AIVINJN1-AAD511F7-A469-4A45-8111-0410E225502E

Touch [BT Menu] on the Bluetooth® audio

screen to display the Bluetooth® audio

menu screen.

The following items are available.

[Now Play-

ing]

Touch to display the Blue-

tooth® audio screen.

[Album Art-

work] *

Touch to turn on/off the

album artwork display on the

Bluetooth® audio screen.

[Current

List]

A list of tracks in the currently

selected folder is displayed.

[Connec-

tions]

Touch to display the con-

nections screen.

“Connections settings”

(page 2-26)

Folder list * Touch to display the folder

list. Touch an item on the list

to select the folder.

*: Displayed only when available.

INFO:

Depending on the connected device, [BT

Menu] may not be displayed.

AUXILIARY (AUX) DEVICES

AIVINJN1-7E4C982E-CE83-4819-8396-9601FE8561DB

Connecting auxiliary devices

AIVINJN1-9776C08E-803B-4D3E-857D-1723F8FE9887

Connect an AUX device to the AUX input

jack.

AUX input jack location:

“USB (Universal Serial Bus) connec-

tion port and AUX (auxiliary) input

jack” (page 2-14)

The AUX input jack accepts any standard

analog audio input such as from a por-

table cassette player, CD player or MP3

player.

INFO:

Insert a 1/8 in (3.5 mm) stereo mini plug in

the audio input jack. If a cable with a mono

plug is used, the audio output may not

function normally.

AUX operation

AIVINJN1-8467D2B9-7D28-4DAB-8F80-11B9ACDD5164

Activation and playing:

Turn on an AUX device.

Connect an AUX cable to the AUX device

and the AUX input jack. Select AUX mode

Condition:

3-38

(83,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
from the audio source menu screen.
“Selecting audio source” (page 3-17)
How to view AUX screen
AIVINJN1-3A8A4717-B982-4AEC-B5FA-083909A32A94
5GA0197X
[Source]:
Touch to switch to the source menu
screen.
“Selecting audio source”
(page 3-17)
Audio source indicator:
Indicates that the AUX source is
currently playing.
Turn direction indicator (if so
equipped):
When a navigation route is set, the
turn direction and the distance to the
next turn are displayed.
Volume Setting keys:
Touch one of the keys to select the
sound output gain from [Low], [Med-
ium] and [High].
SMARTPHONE AUDIO
GUID-09570053-D159-44C3-92FA-82928FDB59BA
You can also listen to music from your
compatible smartphone using Apple Car-
Play
TM
or Android Auto
TM
.
“Apple CarPlay
TM
” (page 5-21)
“Android Auto
TM
” (page 5-23)
Connecting smartphone
GUID-85D99C1D-6F8E-4540-A0B8-CE584A4F7ED2
Connect the iPhone® or Android phone to
the USB connection port.
“USB (Universal Serial Bus) connec-
tion port and AUX (auxiliary) input
jack” (page 2-14)
Smartphone audio operation
GUID-869103BD-04F6-4DB6-95CA-436C13C02B75
1. Connect the iPhone® or Android
phone to the USB connection port
and activate Apple CarPlay
TM
or An-
droid Auto
TM
.
2. Push <AUDIO>.
3. Touch [Source].
4. Touch [Apple CarPlay] or [Android
Auto] in the audio source menu
screen, and the smartphone audio
starts activating.
“Selecting audio source”
(page 3-17)
3. Audio system
Condition:
3-39

(84,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

3. Audio system

AUDIO SETTINGS

AIVINJN1-ECFE1718-B192-4A27-91B2-70E3D8B84B09

Audio settings can be adjusted or audio related functions can be turned on/off with the following procedure.

1. Touch [Settings] on the Launch Bar.

2. Touch [Sound].

Available setting items may vary depending on models and specifications.

Setting items Action

[Bass]

Adjust the speaker tone quality and sound balance by touching [-]/[+], [L]/[R] or [R]/[F].

[Middle]

[Treble]

[Balance]

[Fade]

[Bass Enhancer] When this item is turned on, the system enhances bass sound.

[PersonalSpace] Adjust the audio settings to best optimize the sound for the driver’s listening position.

[Speed Sensitive Volume] Automatically adjusts the volume depending on the vehicle speed. Touch [-]/[+] to change

the sensitivity level.

Condition:

3-40

(85,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

AUDIO ADJUSTMENTS WITH

AUDIO ADJUST BAR (if so

equipped)

AIVINJN1-4037132B-707C-4A3D-B14B-B0CCB3B69C4B

5GA0198X

Sound quality can be adjusted with <TU-

NE·SCROLL/OK>/<TUNE·SCROLL/

SOUND>. Push <TUNE·SCROLL/OK>/<TU-

NE·SCROLL/SOUND>, when a list screen is

not displayed, and the audio adjust bar is

displayed. Each time <TUNE·SCROLL/

OK>/<TUNE·SCROLL/SOUND> is pushed,

the selected setting item will change as

follows.

.Type A (if so equipped):

[Bass] ?[Middle] ?[Treble] ?[Bal-

ance] ?[Fade] (if so equipped)

.Type B (if so equipped):

[Bass] ?[Treble] ?[Space] (Personal-

Space)

Turn <TUNE·SCROLL/OK>/<TUNE·SC-

ROLL/SOUND> to adjust the level of the

selected setting item.

INFO:

This function may not be available when a

menu is highlighted on the screen.

CD/USB MEMORY DEVICE CARE

AND CLEANING

AIVINJN1-382E2C0C-F95D-4F32-83DB-7AC976003DF3

CD (if so equipped)

AIVINJN1-2435A350-AAE3-4957-A686-FFDF46B8AF14

SAA0451

.Handle a CD by its edges. Never touch

the surface of the disc. Do not bend

the disc.

.Always place the discs in the storage

case when they are not being used.

.To clean a disc, wipe the surface from

the center to the outer edge using a

clean, soft cloth. Do not wipe the disc

using a circular motion.

Do not use a conventional record

3. Audio system

Condition:

3-41

(86,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

3. Audio system

cleaner or alcohol intended for indus-

trial use.

.A new disc may be rough on the inner

and outer edges. Remove the rough

edges by rubbing the inner and outer

edges with the side of a pen or pencil

as illustrated.

USB MEMORY DEVICE

AIVINJN1-F355BB54-6B69-4B59-B94F-C82FA1BFE34F

.Never touch the terminal portion of

the USB memory device.

.Do not place heavy objects on the USB

memory device.

.Do not store the USB memory device

in highly humid locations.

.Do not expose the USB memory device

to direct sunlight.

.Do not spill any liquids on the USB

memory device.

Refer to the USB memory device Owner’s

Manual for the details.

Condition:

3-42

(87,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

4 Hands-Free Phone

Bluetooth® Hands-Free Phone System .......................... 4-2

Phone screen ............................................................................... 4-3

Indicators ......................................................................................... 4-4

Phone ................................................................................................. 4-4

Hands-free text messaging assistant ....................... 4-7

Phone and text message settings ............................ 4-10

Condition:

(88,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

4. Hands-Free Phone

BLUETOOTH® HANDS-FREE

PHONE SYSTEM

AIVINJN1-99952F72-0167-4B11-9D0E-D9F1C385EEA8

WARNING

AIVINJN1-7F406CDD-BABB-46F8-BC69-A755B0FADFB7

.Use a phone after stopping your

vehicle in a safe location. If you

have to use a phone while driving,

exercise extreme caution at all

times so full attention may be

given to vehicle operation.

.If you find yourself unable to de-

vote full attention to vehicle op-

eration while talking on the phone,

pull off the road to a safe location

and stop your vehicle before doing

so.

CAUTION

AIVINJN1-8975B6E7-2E20-43DC-92EC-4B59345EC04D

To avoid draining the vehicle battery,

use a phone only after starting the

engine or the hybrid system.

Your vehicle is equipped with Bluetooth®

Hands-Free Phone System. If you are an

owner of a compatible Bluetooth® en-

abled cellular phone, you can set up the

wireless connection between your cellular

phone and the in-vehicle phone module.

With Bluetooth® wireless technology, you

can make or receive a telephone call with

your cellular phone in your pocket.

Once a cellular phone is connected to the

in-vehicle phone module, the procedures

for connecting the phone does not need

to be performed again. Your phone will

automatically re-connect to the in-vehicle

phone module when the ignition switch is

placed in the ACC or ON position with the

selected cellular phone turned on and

carried in the vehicle.

You can register up to 6 different Blue-

tooth® devices in the in-vehicle phone

module. However, you can talk on only

one cellular phone at a time.

The Voice Recognition System supports

phone and text message commands, so

dialing a phone number using your voice

is possible.

“7. Voice recognition”

Before using the Bluetooth® Hands-Free

Phone System, refer to the following

notes.

.Wireless LAN (Wi-Fi) and the Blue-

tooth® functions share the same fre-

quency band (2.4 GHz). Using the

Bluetooth® and the wireless LAN func-

tions at the same time may slow down

or disconnect the communication and

cause undesired noise. It is recom-

mended that you turn off the wireless

LAN (Wi-Fi) when using the Bluetooth®

functions.

.Set up the wireless connection be-

tween a compatible cellular phone and

the in-vehicle phone module before

using the Bluetooth® Hands-Free

Phone System.

.Some Bluetooth® enabled cellular

phones may not be recognized by

the in-vehicle phone module. Visit the

website below for a recommended

phone list.

www.nissanusa.com/bluetooth/

.You will not be able to use a hands-

free phone under the following condi-

tions:

— Your vehicle is outside of the tele-

phone service area.

— Your vehicle is in an area where it is

difficult to receive radio waves; such

as in a tunnel, in an underground

parking garage, behind a tall build-

ing or in a mountainous area.

— Your cellular phone is locked in

order to prevent dialing.

.When the radio wave condition is not

ideal or ambient sound is too loud, it

Condition:

4-2

(89,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

may be difficult to hear the other

person’s voice during a call.

.Immediately after the ignition switch is

placed in the ACC or ON position, it

may not be possible to receive a call

for a short period of time.

.Do not place the cellular phone in an

area surrounded by metal or far away

from the in-vehicle phone module to

prevent tone quality degradation and

wireless connection disruption.

.While a cellular phone is connected

through the Bluetooth® wireless con-

nection, the battery power of the

cellular phone may discharge quicker

than usual.

.Visit the website below for trouble-

shooting help if the Bluetooth® Hands-

Free Phone System seems to be mal-

functioning.

www.nissanusa.com/bluetooth/

.Some cellular phones or other devices

may cause interference or a buzzing

noise to come from the audio system

speakers. Storing the device in a dif-

ferent location may reduce or elim-

inate the noise.

.Refer to the cellular phone Owner’s

Manual regarding the telephone pair-

ing procedure specific to your phone,

battery charging, cellular phone an-

tenna, etc.

.The antenna or battery display on the

monitor may not coincide with the

antenna or battery display of some

cellular phones.

.If reception between callers is unclear,

adjusting the incoming or outgoing

call volume may improve the clarity.

“Volume and Beeps settings”

(page 2-28)

.The microphone is located near the

map light.

.To improve call quality, the micro-

phone is optimized to recognize the

driver’s voice. Speech from vehicle

passengers may not be captured by

the Bluetooth® Hands-Free Phone Sys-

tem.

.Keep the interior of the vehicle as quiet

as possible to hear the caller’s voice

clearly as well as to minimize echo.

Reduce background noise as much as

possible by closing windows and

pointing HVAC vents away from the

ceiling.

PHONE SCREEN

GUID-04D2161A-4161-420C-8378-B3B9F8F35391

The phone screen can be displayed by

touching [Phone] on the Launch Bar,

pushing <>on the steering wheel or

pushing <>(if so equipped) on the

control panel.

4. Hands-Free Phone

Condition:

4-3

(90,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
4. Hands-Free Phone
Available items
Menu item Action
[Quick Dial] Displays the Quick Dial
screen.
“Making a call”
(page 4-5)
[Phonebook] Displays the phonebook
screen.
“Making a call”
(page 4-5)
[Call History] Displays the call history
screen.
“Making a call”
(page 4-5)
[Dial Number] Displays the phone
number entry screen.
“Making a call”
(page 4-5)
[Text Message] Displays the received
message list screen.
“Displaying received
message list”
(page 4-8)
[Connections] Displays the connection
screen.
“Setting Bluetooth®”
(page 2-26)
[Volume] Displays the volume ad-
justment screen.
“Volume settings”
(page 4-12)
INFO:
Depending on the connected device,
some functions cannot be used.
INDICATORS
AIVINJN1-DF17CCD9-47EB-42F9-B647-1A1218B25DA1
5GF0096X
When a cellular phone is connected
through the Bluetooth® wireless connec-
tion, indicators for phone and text
messaging are displayed on the top of
the screen.
Indicates the number of unread
received messages.
Indicates the Bluetooth® device
that is currently connected.
Indicates the strength of the
signal the Bluetooth® device is
receiving.
Indicates the amount of re-
maining Bluetooth® device bat-
tery.
PHONE AIVINJN1-023A5F01-7310-424C-B3E9-547E1F8FC21F
Connecting Bluetooth® Hands-
Free Phone
AIVINJN1-46BD8347-EF56-4BDE-AE6B-DB97C7EC282D
A cellular phone device must be con-
nected to the Bluetooth® Hands-Free
Phone System before operation. Up to 6
Bluetooth® devices can be connected to
the system.
“Setting Bluetooth®” (page 2-26)
Phone selection
AIVINJN1-205885D8-3C6A-48D8-97F0-5631F1B29D25
Follow the instructions below to select a
connected device for use with the Blue-
tooth® Hands-Free Phone System:
1. Touch [Phone] on the Launch Bar.
2. Touch [Connections] and touch [Blue-
tooth]. A list of the connected cellular
phones is displayed.
Condition:
4-4

(91,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

3. Touch one of the connected cellular

phones from the list.

When the connection is successful,

"Connected" is displayed under the

device name.

If [ ] displayed in gray, touch [ ].

INFO:

To select a phone, the Bluetooth® of the

cellular phone needs to be turned on.

Making a call

AIVINJN1-A10664E4-4636-4046-949D-803558D90AF1

1. Touch [Phone] on the Launch Bar.

2. Select one of the following methods to

make a call.

5GF0097X

[Quick Dial] :

Select a telephone number registered

as a Quick Dial number.

“Quick Dial” (page 4-13)

[Phonebook] :

Select a person and the phone num-

ber you wish to call from the phone-

book.

Depending on the device, the phone-

book will be downloaded from the

cellular phone automatically when it

is connected. If the automatic down-

load does not take place, the tele-

phone number must be transferred to

the hands-free phone system from the

cellular phone prior to using this

method.

“Phone settings” (page 4-10)

[Call History] :

Select a telephone number from re-

cent incoming, outgoing or missed

calls.

[Dial Number] :

Enter the phone number manually

using the keypad displayed on the

screen.

“How to input letters and num-

bers” (page 2-20)

3. Dialing will start and the screen will

change to the call in progress screen.

Receiving a call

AIVINJN1-309AF505-32BC-4C5C-80D1-0E512251C11B

5GF0098X

When you receive a phone call, the display

switches to the Incoming Call screen and

the ringtone is played through the vehi-

cle’s audio system.

Taking a call:

To answer the call, take one of the

following actions.

.Push <>on the steering wheel.

.Touch [Answer].

Rejecting a call:

To reject the call, take one of the following

actions.

.Push and hold <>on the steering

wheel.

.Touch [Decline].

4. Hands-Free Phone

Condition:

4-5

(92,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

4. Hands-Free Phone

Holding a call:

To hold the call, touch [Hold Call].

During a call

AIVINJN1-C160F19D-493E-4687-BE13-1F6A2E523B4E

5GF0099X

The Call in Progress screen will appear

during a call.

To hang up the phone, touch [Hang up].

Operations during a call:

There are some options available other

than hanging up a call or answering/

rejecting incoming calls.

Touch one of the following displayed keys

on the screen to take action.

Available

item

Action

[Use Handset] Transfer the call to the

cellular phone.

[Mute] When muted, your voice

will not be heard by the

person on the other end of

the line.

[Dial Number] Using the touch tone, send

digits to the connected

party for using services

such as voicemail.

[Switch Call]* Answer another incoming

call. The person you are

talking to will be placed on

hold. Push once more to

speak to the person on

hold again.

*: Available when a call is received while on

the line with another person. The avail-

ability of this function depends on the

cellular phone.

INFO:

To adjust the person’s voice to be louder

or quieter, push <>on the steering

wheel or turn <VOLUME/ >/<VOL/ >

while talking on the phone.

Call from a second person:

5GF0100X

When another phone call is received

during a call, the Call Waiting screen will

appear.

Answering call from a second person:

To answer the call from the second

person and place the first caller on hold,

take one of the following actions.

.Push <>on the steering wheel.

.Touch [Answer].

Rejecting call from a second person:

To reject a call from the second person

and continue the conversation with the

first caller, touch [Decline].

Condition:

4-6

(93,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

During a call with a second person:

5GF0101X

To hang up the phone and return to the

conversation with the first caller, touch

[Hang up].

To switch between two calls on line, touch

[Switch Call].

HANDS-FREE TEXT MESSAGING

ASSISTANT

AIVINJN1-9092E6E3-0312-4427-83C9-7BCEA4744D55

WARNING

AIVINJN1-16484565-69F4-46E9-97B3-C1982598651E

.Use the text messaging feature

after parking your vehicle in a safe

location. If you have to use the

feature while driving, exercise ex-

treme caution at all times so full

attention may be given to vehicle

operation.

.Laws in some jurisdictions may

restrict the use of “Text-to-

Speech.” Check local regulations

before using this feature.

.Laws in some jurisdictions may

restrict the use of some of the

applications and features, such as

social networking and texting.

Check local regulations for any

requirements.

.If you are unable to devote full

attention to vehicle operation

while using the text messaging

feature, pull off the road to a safe

location and stop your vehicle.

CAUTION

AIVINJN1-6D008478-9197-44FF-B37B-98DEC75BD2FC

This feature is disabled if the con-

nected device does not support it. See

the phone’s Owner’s Manual for de-

tails and instructions.

The system allows for the sending and

receiving of text messages through the

vehicle interface.

The availability of the text message func-

tion may vary depending on the cellular

phone.

Receiving a message

AIVINJN1-21DB93A3-3BB9-4A41-BD63-D9FB66E9ED45

5GF0102X

When the cellular phone connected to the

vehicle receives a text message, a notifi-

cation will appear on the touch screen

display and on the vehicle information

display with a tone.

To check the message, touch [Read].

Touch [Ignore] to save the message to

be checked later.

If you want to respond using a predefined

message, touch the message for auto

reply .

The text message for auto reply can be

edited.

“Phone settings” (page 4-10)

4. Hands-Free Phone

Condition:

4-7

(94,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

4. Hands-Free Phone

INFO:

.Replying to text messages may not be

supported by all phones. Please check

your phone’s owner’s manual for de-

tails.

.Depending on the cellular phone, the

notification display setting may need

to be activated on the cellular phone.

.Whether to read or ignore the mes-

sage can be selected operating the

switch on the steering wheel. Push

<>to read the message. Push and

hold <>to ignore the message.

Displaying received message list

AIVINJN1-95452804-687D-42E4-A40B-91BFF2EC5D60

5GF0103X

1. Touch [Phone] on the Launch Bar.

2. Touch [Text Message].

3. Touch an item on the list to read or

reply to the message.

INFO:

Up to 100 messages can be stored in the

message list.

Received message screen

AIVINJN1-C9EDB768-A890-45FB-A50B-C65A60FEEDEE

5GF0104X

Touching [Read] on the new message

notification screen or selecting a message

from the message list will show the details

of the received message on the display.

Available actions:

.[Prev.]:

Touch to read the previous message.

.[Next]:

Touch to read the next message.

.[Play]/[Stop]:

Touch [Play] to have the hands-free

phone system read out the received

message. Touch [Stop] to stop read-

ing.

.[Call]:

If the sender of the message is regis-

tered in the Phonebook, touch this

icon to make a call to the sender.

.[Reply]:

A reply message can be selected from

the template.

“Sending a text message”

(page 4-9)

INFO:

.Available keys may vary depending on

the situations and models.

.If the sender’s name and phone num-

ber are registered in the Phonebook,

the name of the sender is displayed

when a message is received.

.To adjust the message reading voice

volume, push <>on the steering

wheel or turn <VOLUME/ >/<VOL/

Condition:

4-8

(95,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Sending a text message

AIVINJN1-2F6880B3-BAEC-4B6F-91B4-5465323E6184

This function may not be supported

depending on the cellular phone.

5GF0109X

1. Touch [Phone] on the Launch Bar.

2. Touch [Text Message].

3. Touch [Create Message].

The following items are available.

Available item Action

[To] [Enter Number by Keypad] Enter the phone number of the recipient using the keypad. Touch [OK] to

confirm.

[Quick Dial] Select a recipient from the Quick Dial list.

[Phonebook] Select a recipient from the Phonebook.

[Call History] Select a recipient/phone number from call history.

[Select Text] [Fixed] Touch to display a list of fixed text messages.

[Customized] Touch to display a list of custom text message templates.

Custom text can be created or edited from the setting menu.

“Phone and text message settings” (page 4-10)

[Send] Touch to send the message.

4. Hands-Free Phone

Condition:

4-9

(96,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

4. Hands-Free Phone

PHONE AND TEXT MESSAGE SETTINGS

AIVINJN1-1513E8E2-AF29-4D62-968F-3689E6A05889

Phone settings

AIVINJN1-113ACEB2-74B1-46EA-92C5-7C0462E956E7

Bluetooth® Hands-Free Phone System settings can be changed according to the user’s preference.

1. Touch [Settings] on the Launch Bar.

2. Touch [Phone].

Available setting items may vary depending on models and specifications.

Available setting items

Setting item Action

[Connections] Displays the Connections screen. Phone connection, selection,

deletion and other features are available.

“Connections settings” (page 2-26)

[Quick Dial] [Edit] Entries in the Quick Dial can be edited. Touch [Add New] to register

a new entry.

“Quick Dial” (page 4-13)

[Delete All] Deletes all of the phone numbers in the Quick Dial.

[Phonebook] [Download Entire Phonebook] All of the phone numbers that are stored in a phonebook of a

cellular phone that is connected to the vehicle are downloaded at

once.

[Auto Downloaded] Turns on/off automatic downloading of the phonebook from the

connected cellular phone.

[Sort Phonebook by] Changes the sorted order of contacts in the phonebook.

Condition:

4-10

(97,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

[Text Message] [Text Message] Turns the text messaging function on/off.

[Text Message Ringtone] Turns the incoming message sound on/off.

[Signature] Turns the signature setting for the outgoing text message on/off.

[Auto Reply] Turns on/off the automatic text message reply function.

[Auto Reply Text Message] Selects the text message to be used for the automatic reply

function.

[Edit Custom Text] Creates or edits a customized text message reply.

[Notifications] [Driver Only] When this item is turned on, incoming call notification is displayed

only in the vehicle information display.

[Vehicle Ringtone] Turns the vehicle ringtone on/off.

[Automatic Hold] When this item turns on, an incoming phone call will be put on hold

automatically.

4. Hands-Free Phone

Condition:

4-11

(98,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

4. Hands-Free Phone

Volume settings

GUID-1440FF88-223C-48E5-961F-4C0707FFD6FA

Volume settings can be adjusted.

1. Touch [Phone] on the Launch Bar.

2. Touch [Volume].

The following volume setting items are available.

Setting items Action

[Ringtone] Adjusts the volume level of the ringtone of incoming calls.

[Outgoing Call] Adjusts the volume level of the outgoing calls.

INFO:

The phone volume setting menus can also be accessed from the Settings screen.

“System settings” (page 2-23)

Condition:

4-12

(99,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Quick Dial

AIVINJN1-0FB27751-B822-433A-977A-435B2430D290

5GF0107X

Up to 20 Quick Dial entries can be

registered.

Quick Dial entries can be used to quickly

make a call or send text messages.

Registration:

1. Touch [Phone] on the Launch Bar.

2. Touch [Quick Dial].

3. Touch [Edit].

4. Touch [Add New] to register a phone

number to the Quick Dial list.

5. Select a method for registration.

Available methods:

.[Copy from Call History]:

A phone number can be selected

from [All], [Incoming], [Outgoing], or

[Missed] call history lists.

.[Copy from Phonebook]:

A phone number can be selected

from the Phonebook.

.[Enter Number by Keypad]:

A phone number can be entered

manually using keypad.

INFO:

Available methods may vary depend-

ing on cellular phone support.

6. When a phone number has been

selected, the registration screen is

displayed. Enter the phone number

and edit the entry information as

necessary.

7. Touch [OK] to save the entry.

INFO:

.Pushing < > (if so equipped) on

the control panel can also display

the phone screen.

.Quick Dial entries can also be regis-

tered by touching [Settings] on the

Launch Bar and then selecting

[Phone].

“Phone settings” (page 4-10)

Voice Tag:

A voice tag can be recorded for each of

the registered Quick Dial numbers and

can be used to dial the number by speak-

ing it.

5GF0115X

On the Quick Dial registration screen,

select [Relationship / Voice...].

.Select a preferred relationship from

the list.

.Touch [Customize] and touch [Record]

to register your original voice tag.

INFO:

.Touch [Play] to play the recorded voice

tag.

.Touch [Delete] to delete the voice tag.

4. Hands-Free Phone

Condition:

4-13

(100,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

4. Hands-Free Phone

MEMO

Condition:

4-14

(101,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
5 Information
Information menu ........................................................................... 5-2
Updating system software ................................................ 5-5
NissanConnect® Services (if so equipped) ................... 5-6
Subscription to NissanConnect® Services ............. 5-6
Legal disclaimer ......................................................................... 5-6
NissanConnect® Services features .............................. 5-7
NissanConnect® Services Menus ............................... 5-11
Emergency support .............................................................. 5-14
NissanConnect® Services settings ............................ 5-17
SiriusXM® Travel Link (if so equipped) .......................... 5-18
Viewing SiriusXM® Travel Link ...................................... 5-18
Using SiriusXM® Travel Link ........................................... 5-19
Apple CarPlay
TM
............................................................................. 5-21
Compatibility .............................................................................. 5-21
Apple CarPlay
TM
operation ............................................. 5-21
Apple CarPlay
TM
settings ................................................. 5-22
Apple CarPlay
TM
system limitations ........................ 5-23
Android Auto
TM
............................................................................... 5-23
Compatibility .............................................................................. 5-23
Initial Android Auto
TM
settings .................................... 5-24
Android Auto
TM
operation .............................................. 5-24
Android Auto
TM
settings ................................................... 5-25
Android Auto
TM
system limitations .......................... 5-25
Siri® Eyes Free .................................................................................. 5-26
General information ............................................................. 5-26
Requirements ............................................................................ 5-26
Siri® Eyes Free activation ................................................. 5-26
Operating Siri® Eyes Free .............................................. 5-27
Condition:

(102,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

5. Information

INFORMATION MENU

AIVINJN1-5E9B2C85-D229-414A-96FE-2A3389057A2B

The information screen sets or displays various information that is helpful for using the vehicle.

5GH0750X

Push <MENU> and then touch [Info] on the Launch Bar to display the Information menu.

Available items may vary depending on models and specifications.

Items displayed on the screen may not function depending on various conditions.

Menu item Action

[NissanConnect Services] Displays the NissanConnect® Services menu screen.

“NissanConnect® Services” (page 5-6)

[SXM Weather] Displays the SiriusXM® Weather screen.

“Using SiriusXM® Travel Link” (page 5-19)

[SXM Traffic]/[Premium Traffic] Displays the Traffic Information screen.

“Viewing traffic information” (page 6-45)

[SXM Sports Scores] Displays the SiriusXM® Sports screen.

“Using SiriusXM® Travel Link” (page 5-19)

[SXM Stocks] Displays the SiriusXM® Stocks screen.

“Using SiriusXM® Travel Link” (page 5-19)

[SXM Fuel Prices] Displays the SiriusXM® Fuel Prices screen.

“Using SiriusXM® Travel Link” (page 5-19)

Condition:

5-2

(103,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Menu item Action

[SXM Parking] Displays the SiriusXM® Parking screen.

“Using SiriusXM® Travel Link” (page 5-19)

[SXM Movie Listings] Displays the SiriusXM® Movie Listings screen.

“Using SiriusXM® Travel Link” (page 5-19)

[Vehicle] [Eco Drive Report] Displays the Eco Drive Report.

Your driving score will be displayed in real time, with 100 points

designated as the score for ideal eco-driving.

Touch [History] to view the Drive Report history. Touch [Reset] to clear the

past records.

To improve your score:

.When starting off, depress the accelerator gently.

.When cruising, accelerate and decelerate as little as possible.

.When decelerating, release the accelerator early.

[Energy Flow] Displays energy information. Touch [History] to display the Fuel Economy

History screen.

For details of the Energy Flow, refer to the vehicle Owner’s Manual.

[Where Am I?] The name and distance of the next/previous street, and other informa-

tion that indicates the current vehicle location are displayed. GPS latitude

and longitude are shown on the bottom right.

[System Information] [Software Version] Displays the information of the Software Version, etc.

[Software Update] The system software can be updated.

“Updating system software” (page 5-5)

[Map Update] The map data can be updated.

“How to update map data” (page 6-65)

[SXM Information] Displays the SiriusXM® information.

The signal quality, subscription status and SiriusXM® radio ID, etc. are

displayed.

[Licence Information (OSS)] Displays the Open Source Software (OSS) licenses information.

5. Information

Condition:

5-3

(104,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

5. Information

Menu item Action

[GPS Position] Displays GPS information, such as number of satellites, latitude/long-

itude, and approximate altitude, etc.

[Vehicle Data Transmission] When [OK] is touched, data transmission to NISSAN is enabled. Touching

[Decline] disables the NissanConnect® Services, Premium Traffic, Online

Search, etc.

[Apps] [Apple CarPlay] Displays the Apple CarPlay

screen.

“Apple CarPlay

” (page 5-21)

[Android Auto] Displays the Android Auto

screen.

“Android Auto

” (page 5-23)

INFO:

A SiriusXM® Travel Link (if so equipped) or SiriusXM Traffic

(if so equipped) subscription is necessary to receive SiriusXM® information

services.

Condition:

5-4

(105,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

UPDATING SYSTEM SOFTWARE

GUID-C5812199-D226-4CAE-88BC-9850F5D75D4A

WARNING

GUID-18C36E36-3390-45AC-9880-F286832A190A

During the update process, your vehi-

cle should be kept in a well ventilated

area to avoid the exposure to carbon

monoxide. Do not breathe exhaust

gases; they contain colorless and

odorless carbon monoxide. Carbon

monoxide is dangerous. It can cause

unconsciousness or death.

How to update from the pop-up

screen GUID-B2CF4264-E238-40C0-9F1A-98CBB64B112E

When both of the following conditions are

met, the system informs the driver with a

pop-up on the screen when system soft-

ware update is available.

.[Auto] is selected under [Update Meth-

od].

“How to update from the system

menu” (page 5-5)

.The system is connected to Wi-Fi net-

work.

“Wi-Fi Setting” (page 2-27)

1. When the pop-up appears and

prompts the driver to perform the

system software update, operate the

system according to the guides shown

on the screen to download the up-

dates. Another pop-up will appear

when downloading is complete.

2. After the system software update is

complete, place the ignition switch in

the OFF position and leave the system

for 20 minutes without operating the

switches on the control panel and the

steering wheel. Place the ignition

switch in the ON position and the

updated software will be available.

INFO:

The update may not be reflected if the

ignition switch is placed back in the ON

position before the 20-minute period has

passed.

How to update from the system

menu GUID-46D25341-10D0-421F-822F-8F3B5ED9A035

WARNING

GUID-A208984B-FB51-4344-8E0E-253489D724C5

To operate the system for software

update, first park the vehicle in a safe

location.

System software updates can be down-

loaded manually via Wi-Fi from the system

menu.

1. Connect the vehicle to a Wi-Fi network.

“Wi-Fi Setting” (page 2-27)

2. Push <MENU>.

3. Touch [Info] on the Launch Bar and

then touch [System Information].

4. Touch [Software Update].

5GH0781X

5. Touch [Start Software Update]. The

current software version and date of

last check are displayed.

INFO:

When [Update Method] is set to [Auto],

a notification is made in case that

software can be updated.

6. To check manually for available up-

dates, touch [Check for an Update]. A

message is displayed when update

availability is confirmed.

7. Touch [Download] to start download-

ing and updating the system software.

5. Information

Condition:

5-5

(106,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

5. Information

8. After the system software update is

complete, place the ignition switch in

the OFF position and leave the system

for 20 minutes without operating the

switches on the control panel and the

steering wheel. Place the ignition

switch in the ON position and the

updated software will be available.

INFO:

.The update may not be reflected if

the ignition switch is placed back in

the ON position before the 20-

minute period has passed.

.The following indicators are dis-

played on the top of the screen

while the software is being down-

loaded or updated.

: Downloading

: Updating

.If updating software is unnecessary,

touch [OK] to return to the previous

screen.

.You will be charged separately

when the internet communication

is made via smartphones. Consult

your communication companies re-

garding the communication fee.

.The download data size of software

updates can vary between 80 MB

and 300 MB. If you use your smart-

phone as a Wi-Fi connection, you

may incur data charges from your

phone carrier. Please connect to a

secure WPA2 Wi-Fi network to avoid

potential phone carrier data

charges.

.[Save Version Information to USB

Device] is not available on this

system.

.Depending on the models, the same

operation can be performed by

touching [Settings] on the Launch

Bar and then touching [System

Update].

NISSANCONNECT® SERVICES (if

so equipped)

AIVINJN1-17324563-EABE-48D2-BF54-CA6C6411D90B

SUBSCRIPTION TO NISSANCON-

NECT® SERVICES

AIVINJN1-79859816-B70D-4DAD-AB81-2CEDA8C9C449

It is necessary to subscribe to NissanCon-

nect® Services in order to use NissanCon-

nect® Services. To activate

NissanConnect® Services, you can enroll

via the NissanConnect® Services app,

NissanConnect® portal website, or by

contacting a NISSAN dealer.

NissanConnect® Services are offered by

SiriusXM® or other third party vendors in

accordance with the terms and condi-

tions and the privacy policies outlined in a

Subscription Agreement.

LEGAL DISCLAIMER

AIVINJN1-738A7C04-99EB-48FC-9CCD-BDCCDF536ECB

WARNING

GUID-6F3C1DBD-622F-495C-ADDD-CAC52F2F2E9E

Driving is serious business and re-

quires your full attention. Only use

features and connected devices when

safe and legal to do so. Some features,

including automatic crash notification

and SOS, are dependent upon the

telematics device being in operative

condition, its ability to connect to a

wireless network, compatible wireless

Condition:

5-6

(107,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

network availability, navigation map

data and GPS satellite signal recep-

tions, the absence of which can limit

or prevent the ability to reach the

NissanConnect® Services Data Center

and NissanConnect® Services Re-

sponse Center or receive support.

GPS mapping may not be detailed in

all areas or reflect current road status.

Never program GPS while driving.

Only use Remote Engine Start/Stop

(if so equipped) and Remote Horn &

Lights features in accordance with

any laws, rules or ordinances in effect

in your vehicle’s location.

Avoid operating NissanConnect® Ser-

vices in such a way that you are

distracted while driving. Except for

services provided under Demonstra-

tion Mode, a NissanConnect® Services

Subscription Agreement is required to

use this service.

Beginning on the date of purchase of your

vehicle, a trial period for the services is

included for a limited period of time.

Services are dependent upon subscription

enrollment and the telematics device

being in operative condition, cellular con-

nection availability, navigation map data,

and GPS satellite signal reception, which

can limit the ability to reach NissanCon-

nect® Services or to receive support. The

service requires a compatible 4G LTE/3G

cellular network. Should the cellular pro-

vider terminate or restrict network ser-

vice, services will not be available. Under

this circumstance, your service may be

suspended or terminated without notice

and without liability to NISSAN, NISSAN’s

third party service providers, the under-

lying wireless carrier or any third party

beneficiary. In the event that a change of

telecommunications systems or services

becomes necessary, you are solely re-

sponsible for replacing, as well as the cost

of replacing, any equipment in the vehicle

that is necessitated. Terms and conditions

of NissanConnect® Services Subscription

Agreement apply.

NISSANCONNECT® SERVICES FEA-

TURES AIVINJN1-6C449EE6-7E5C-4FD6-9F16-E808A8403302

NissanConnect® Services provides various

types of information and services by

connecting your vehicle to the Nissan-

Connect® Services Data Center and Nis-

sanConnect® Services Response Center

using the TCU (Telematics Control Unit)

installed in your vehicle.

WARNING

AIVINJN1-3351361F-A754-4DC9-B209-4D2EF539E24B

.Radio waves could adversely af-

fect electric medical equipment.

Individuals who use a pacemaker

should contact the device manu-

facturer regarding any possible

effects before using the system.

.The TCU antenna is installed inside

the upper central part of the in-

strument panel. An occupant

should not get any closer to the

antenna than specified by the

pacemaker manufacturer. The

radio waves from the TCU antenna

may adversely affect the opera-

tion of the pacemaker while using

the NissanConnect® Services.

.Please note that the Automatic

Collision Notification (ACN) service

and Emergency Calling (E-Call)

function cannot be used in the

following conditions:

— The vehicle moves outside the

NissanConnect® Services area

and connection with the TCU

(Telematics Control Unit) is af-

fected.

— The vehicle is in a location with

poor signal reception such as a

5. Information

Condition:

5-7

(108,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

5. Information

tunnel, underground parking,

behind a building or in a moun-

tainous area.

.It may not be possible to make an

emergency call depending on the

severity of a collision and/or emer-

gency.

.Emergency functions and services

will not be available without a paid

subscription to NissanConnect®

Services.

.The Automatic Collision Notifica-

tion (ACN) service may not function

properly depending on the sever-

ity of a collision and/or emer-

gency.

INFO:

.NissanConnect® Services features are

dependent upon subscription enroll-

ment and the telematics device being

in operative condition, cellular con-

nectivity, navigation map data and

GPS satellite signal reception. Terms

and conditions of the NissanConnect®

Services Subscription Agreement ap-

ply.

.Enrollment is required in order to

receive NissanConnect® Services. The

services that can be received vary

depending on the plan in which you

are enrolled.

.Trial period includes beginning on the

date of purchase, however you must

still be enrolled and activated to use

services.

.After the trial period, you must enroll in

a paid subscription for NissanCon-

nect® Services to continue using the

features. The services that can be

received vary depending on the plan

to which you subscribe.

.Laws in some jurisdictions may restrict

the use of “Text-to-Speech.” Check

local regulations before using this

feature.

NissanConnect® Services may be up-

dated. The latest detailed information is

available on the following websites or

from the support line.

NissanConnect® Services website:

For U.S.

www.nissanusa.com/connect

For Canada

http://www.nissan.ca/en/connect

(English)

www.nissan.ca/nissanconnect/fr

(French)

NissanConnect® Services support

line:

1-855-426-6628

.Roadside Assistance Service:

Roadside Assistance allows you to

receive assistance from the Roadside

Response Specialist for a non-emer-

gency incident that requires a towing

or third-party response service. The

service is accessed by touching [ ] on

the map screen. Roadside Assistance

may also be used in conjunction with

the Emergency Assistance service, if

warranted.

“Emergency support” (page 5-14)

.Emergency Calling (E-Call):

The Emergency Calling (E-Call) feature

provides emergency assistance by

connecting to a Response Specialist.

In the event of an emergency, by push

the in-vehicle <SOS> button to use this

feature. The Response Specialist pro-

vides various assistance depending on

the situation.

“Emergency support” (page 5-14)

Condition:

5-8

(109,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

.Automatic Collision Notification

(ACN):

The TCU (Telematics Control Unit)

generates a signal automatically to

the NissanConnect® Services Re-

sponse Center in the case of an

accident severe enough to trigger

one of the vehicle’s air bags. Upon

the signal, a Response Specialist re-

ceives the vehicle location along with

customer information and notifies the

proper authorities in accordance with

established policies and procedures.

.Remote Engine Start/Stop (if so

equipped):

If the vehicle is equipped with both

TCU (Telematics Control Unit) and

Remote Engine Start, customers can

remotely start the engine via the

NissanConnect® Services website or

app.

.Remote Door Lock/Unlock:

The Remote Door Lock/Unlock feature

allows the customer to access the

vehicle remotely from the NissanCon-

nect® Services website or app to send

lock or unlock commands to the

vehicle.

“Connecting to Interactive Voice

Menu” (page 5-12)

.Remote Horn & Lights:

Customers can activate the vehicle’s

headlights and horn via the Nissan-

Connect® Services website or app.

.Curfew Alert:

Customers can set the time interval for

acceptable and unacceptable opera-

tion of the vehicle via NissanConnect®

Portal website and NissanConnect®

Services app. If the time restrictions

are violated, the customer will be

automatically notified (e-mail, text

message, or phone call).

.Alarm Notification:

Customers will be notified if the vehicle

alarm system is activated based on

their notification preferences (e-mail,

text, phone call).

.Boundary Alert:

Customers can set an area for the

vehicle to stay in or out of via the

NissanConnect® Services website or

app. Customers will be notified when

vehicle is out-of-bounds based on

their notification preferences (e-mail,

text, phone call).

.Maintenance Alert/Reminder:

The center sends maintenance and

other relevant info. to registered e-

mail address (PC/Mobile) based on the

vehicle information (e.g. driving mile-

age, etc.) sent at the center access

timing. Details of vehicle information

are separately examined.

.Journey Planner:

Customers can create a multiple way-

point route via Journey Planner on the

NissanConnect® Services website and

send the details directly to their vehi-

cle.

.Destination Download:

Customers can search for different

locations via the NissanConnect® Ser-

vices website and send them directly

to their vehicle.

.Connected Search:

Customers can access Internet search

engines directly from the vehicle to

find exact destinations to navigate to.

.Stolen Vehicle Locator:

In the event that the customer’s vehi-

cle is stolen, after filing a police report

the customer can contact NissanCon-

nect® Services via phone and report

the vehicle stolen. At that point, Nis-

sanConnect® Services emergency

support staff will work with authorities

to attempt to recover the vehicle.

5. Information

Condition:

5-9

(110,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

5. Information

.Valet Alert:

Customers will be notified if their

vehicle is driven outside the radius

that can be set via the NissanConnect®

Services website or app.

Notice to Bluetooth® Hands-Free

Phone users

AIVINJN1-A3748C05-1F87-4558-96C7-C217C525367A

The Bluetooth® Hands-Free Phone Sys-

tem will be disabled and not be able to

take phone calls while the vehicle is

connected to the NissanConnect® Ser-

vices Response Specialists or the emer-

gency support staff at the

NissanConnect® Service Response Center.

This is to avoid various services by Nis-

sanConnect® Services Response Specia-

lists (such as Assisted Search) and

NissanConnect® Services emergency sup-

port staff being interrupted by incoming

calls. Incoming phone calls received while

the vehicle is connected to the Service

Center will not be listed in the call history

of the Bluetooth® Hands-Free Phone Sys-

tem. However those incoming calls may

be listed in the call history of your mobile

phone, depending on its capabilities. After

disconnecting communication with the

NissanConnect® Services Response Spe-

cialist or NissanConnect® Services emer-

gency support staff, check the incoming

call history on your mobile phone when it

is safe to do so.

Service application

AIVINJN1-6DCCAA7A-ED81-4962-9108-ED1D69CB8EDF

A separately purchased NissanConnect®

Services subscription is required. For more

details, refer to the NissanConnect® Ser-

vices website or contact the NissanCon-

nect® Services support line.

NissanConnect® Services website:

For U.S.

www.nissanusa.com/connect

For Canada

http://www.nissan.ca/en/connect

(English)

www.nissan.ca/nissanconnect/fr

(French)

NissanConnect® Services support

line:

1-855-426-6628

INFO:

If the vehicle is owned by another person

and is resold, the subscription for this

service must be canceled and all data

stored on the device must be deleted.

Operating tips

AIVINJN1-1B98368B-E567-43F0-A4F2-C01EC0EA40F0

WARNING

AIVINJN1-D56B9698-6357-41FF-A5C7-FC6C7993EDEA

.Use NissanConnect® Services after

stopping your vehicle in a safe

location. If you have to use Nissan-

Connect® Services while driving,

exercise extreme caution at all

times so full attention may be

given to vehicle operation.

.If you are unable to devote full

attention to vehicle operation

while talking with the NissanCon-

nect® Services, pull off the road to

a safe location and stop your

vehicle.

.Do not use NissanConnect® Services

with the engine or the hybrid system

stopped. Doing so may discharge the

vehicle battery.

.NissanConnect® Services cannot be

used under the following conditions:

— NissanConnect® Services subscrip-

tion has expired.

— The vehicle is outside the area

where the cellular network service

is receivable.

Condition:

5-10

(111,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

— The vehicle is in a location with poor

signal reception such as tunnels,

underground parking garages, be-

hind buildings or in mountainous

areas.

— The line is busy.

— The TCU (Telematics Control Unit) or

other systems of your vehicle are

not working properly.

— The NissanConnect® Services net-

work system is disabled.

.Information Feeds download cannot

be used when the vehicle is connected

to the NissanConnect® Services Data

Center and NissanConnect® Services

Response Center.

.Communication with the NissanCon-

nect® Services Data Center is related

to the data communication mode and

may cause occasional difficulty in

receiving signals, and the signal recei-

vable area may be limited compared

to regular mobile phones.

.You may hear clicks or experience

interruptions while speaking with the

NissanConnect® Services Response

Specialists. This is due to a shift in the

connection zone and is not a malfunc-

tion.

.Depending on the line used, the sound

volume may decrease. Adjust the vo-

lume as necessary.

.Received sounds may be distorted or

ambient noise may sound like voices

of a crowd. This is due to the use of the

digital line and is not a malfunction.

.You may hear your own voice from the

speaker when talking with the Nissan-

Connect® Services Response Specia-

lists due to a network disturbance.

When this occurs, reconnect the line

after a few minutes or at a different

location.

.This vehicle incorporates a communi-

cation device that is called a TCU

(Telematics Control Unit). The commu-

nication connection between this unit

and the NissanConnect® Services Data

Center allows for various services.

When the system connects to the

NissanConnect® Services Data Center,

an antenna icon will appear in the

upper right corner of the screen. Use

the service in a location where the

symbol representing good signal re-

ception appears on the screen.

: When the signal reception is good.

: When the signal reception is bad.

.NissanConnect® Services uses the TCU

(Telematics Control Unit). Even if the

signal strength bar of the in-vehicle

data communication module indicates

good reception, connection to the

NissanConnect® Services Data Center

may be disabled. This does not indi-

cate a malfunction. Operate the sys-

tem again after a few minutes.

NISSANCONNECT® SERVICES ME-

NUS AIVINJN1-F0273C25-12FE-4DB7-B66D-1C90E9FC4E99

With NissanConnect® Services, various

information can be received and dis-

played on the screen. The information

can also be announced by the system.

1. Push <MENU> and then touch [Info] on

the Launch Bar.

2. Touch [NissanConnect Services].

3. Select an item from the NissanCon-

nect® Services menu screens.

5. Information

Condition:

5-11

(112,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
5. Information
Available items Content
[Call Nissan Assis-
tance]
The system con-
nects to the Nissan-
Connect® Services
center. Various ser-
vices to support
your driving are
available by an-
swering the Interac-
tive Voice Menu.
“Connecting to
Interactive
Voice Menu”
(page 5-12)
[Connected Search] Searches for a des-
tination via the In-
ternet and sets a
route using the ve-
hicle navigation sys-
tem.
“Searching by
connecting to
the internet”
(page 6-23)
[Destination Send to
Car]
Access a list of des-
tinations sent to the
vehicle from the
NissanConnect®
Services center.
“Using Destina-
tion Send to
Car”
(page 6-24)
[Journey Planner] Sets a route plan
downloaded from
the NissanConnect®
Services website.
“Using Journey
Planner”
(page 6-24)
[Message Box] Access the mes-
sages sent to the
vehicle from the
NissanConnect®
Services Data Cen-
ter.
“Message Box”
(page 5-13)
[NissanConnect Ser-
vices Settings]
NissanConnect®
Services settings
can be changed.
“NissanConne-
ct® Services
settings”
(page 5-17)
Connecting to Interactive Voice
Menu AIVINJN1-421A0B6E-1AA0-41D5-9584-32C3CFD22611
Various services to support your driving
are available by using the Interactive
Voice Menu. For more details, refer to the
NissanConnect® Services website or con-
tact the NissanConnect® Services support
line.
NissanConnect® Services website:
For U.S.
www.nissanusa.com/connect
For Canada
http://www.nissan.ca/en/connect
(English)
www.nissan.ca/nissanconnect/fr
(French)
NissanConnect® Services support
line:
1-855-426-6628
1. Push <MENU> and touch [Info] on the
Launch Bar.
2. Touch [NissanConnect Services].
3. Touch [Call Nissan Assistance].
4. The system connects to the Nissan-
Connect® Services center and menu
options will be announced. Speak your
preferred option.
.Destination Assistance
Set a destination using an Interac-
tive operator system.
.Roadside Assistance
Connect to the Roadside Response
Specialist.
.Valet Alert
Turns on the Valet Alert function
and monitors the vehicle move-
Condition:
5-12

(113,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

ment within a certain range.

5GB0697X

INFO:

.You can also connect to the Nissan-

Connect® Services Interactive Voice

Menu by touching [ ] on the map.

.After selecting [Call Nissan Assistance],

it may take some time until the system

initiates connection, depending on the

technical environment and whether

the TCU (Telematics Control Unit) is

being used by other services.

.To avoid disconnecting the line, do not

turn off the engine or the hybrid

system.

Message Box

AIVINJN1-D3B19AAA-3DC2-4413-A9B6-ABCF17B88AC1

Messages received from the NissanCon-

nect® Services Data Center are displayed

in the Message Box.

1. Push <MENU> and then touch [Info] on

the Launch Bar.

2. Touch [NissanConnect Services].

3. Touch [Message Box].

4. A message list is displayed. Touch

preferred message from the list.

INFO:

.Touch [Stop] during communication

with the NissanConnect® Services

Data Center to cancel the connection.

.A message is displayed when the

communication is disconnected while

downloading information due to a

poor communication status. Select

[Yes] to restart the download.

.Laws in some jurisdictions may restrict

the use of “Text-to-Speech.” Check

local regulations before using this

feature.

.Some terminology such as personal

names, place names, special terms,

symbols, etc. may not be announced

correctly. This is not a malfunction.

.The system will pause announce-

ments when interrupted by the voice

guidance given by the navigation sys-

tem. When the voice guidance finishes,

the system will restart the announce-

ment.

.The volume can be adjusted when the

system announces the information.

“Volume and Beeps settings”

(page 2-28)

.The selected content is read out while

the vehicle is being driven, or if parked,

you can read the content on the

display.

.Content settings can be made using

the NissanConnect® Services website.

For more details, refer to the Nissan-

Connect® Services website or contact

the NissanConnect® Services support

line.

NissanConnect® Services website:

For U.S.

www.nissanusa.com/connect

For Canada

http://www.nissan.ca/en/connect

(English)

www.nissan.ca/nissanconnect/fr

(French)

5. Information

Condition:

5-13

(114,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

5. Information

NissanConnect® Services support

line:

1-855-426-6628

Screen information:

When information is downloaded from the

NissanConnect® Services Data Center, the

contents of the information are displayed

while the vehicle is stopped.

5GH0805X

Contents:

The contents of the NissanConnect®

Services feed are displayed.

If the feed contains map information,

this icon is displayed. This location

can be set as the destination.

[ ]/[ ]:

Moves to the next or previous page if

the information has a number of

content pages.

If the feed contains phone number

information, this icon is displayed. It is

possible to make a phone call to this

number.

[Menu]:

Stops the Text-to-Speech voice an-

nouncements and displays the opera-

tion menu items on the right side of

the screen.

5GH0806X

After parking the vehicle in a safe location

and touching [Menu], the operation menu

is displayed on the right side of the screen.

INFO:

The availability of the operation menu

items differs depending on the contents

of the selected information.

EMERGENCY SUPPORT

AIVINJN1-4CB95563-4BC2-4C4A-86CF-91272A2AE414

NissanConnect® Services provides various

services to support dealing with emer-

gencies of the subscribed vehicle and the

driver.

For example, in case of an illness or

serious injury, you can seek support by

pushing the in-vehicle <SOS> button and

connecting to NissanConnect® Services.

NissanConnect® Services can specify the

location of the vehicle via GPS, and the

information will be sent to the police or

other agencies as needed.

For information about other NissanCon-

nect® Services emergency support related

services, refer to the NissanConnect®

Services website or contact the Nissan-

Connect® Services support line.

NissanConnect® Services website:

For U.S.

www.nissanusa.com/connect

For Canada

http://www.nissan.ca/en/connect

(English)

Condition:

5-14

(115,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

www.nissan.ca/nissanconnect/fr

(French)

NissanConnect® Services support

line:

1-855-426-6628

WARNING

AIVINJN1-BA450A5A-1C21-4C29-B306-4BD13E19D061

.Please note that the Automatic

Collision Notification service and

Emergency Call function cannot be

used in the following conditions:

— Emergency functions and ser-

vices will not be available with-

out a paid subscription to

NissanConnect® Services.

— The NissanConnect® Services

network system is disabled.

— The vehicle moves outside the

service area where the TCU

(Telematics Control Unit) is con-

nected to the system.

— The vehicle is outside the area

where the cellular network ser-

vice is receivable.

— The vehicle is in a location with

poor signal reception such as

tunnels, underground parking

garages, behind buildings or in

mountainous areas.

— The line is busy.

— The TCU (Telematics Control

Unit) or other systems of your

vehicle are not working properly.

— It may not be possible to make

an emergency call depending on

the severity of a collision and/or

emergency.

.Park the vehicle in a safe location

and set the parking brake before

operating <SOS>.

.Only use this service in case of an

emergency. There may be a pen-

alty for inappropriate use of the

service.

.Radio waves could adversely af-

fect electric medical equipment.

Individuals who use pacemakers

should contact the device manu-

facturer regarding any possible

effects before using the system.

.The TCU (Telematics Control Unit)

antenna is installed inside the

upper central part of the instru-

ment panel. An occupant should

not get any closer to the antenna

than specified by the pacemaker

manufacturer. The radio waves

from the TCU antenna may ad-

versely affect the operation of the

pacemaker while using the Nis-

sanConnect® Services.

Making an emergency call

AIVINJN1-A7409108-5244-4D39-8759-9D27EED8CD91

5GH0353X

Example A

5GH0911X

Example B

5. Information

Condition:

5-15

(116,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

5. Information

1. Push <SOS>.

2. When the line is connected, speak to

the Response Specialist.

If you want to cancel the emergency call,

push and hold <SOS> for a few seconds.

The <SOS> is located near the map light.

INFO:

.After <SOS> is pushed, it may take

some time until the system initiates

connection, depending on the techni-

cal environment and whether the TCU

(Telematics Control Unit) is being used

by other services.

.An indicator light on <SOS> shows the

readiness of the emergency support

system. If the indicator light is not

illuminated, pushing <SOS> does not

connect your vehicle to the Response

Specialist.

The indicator light blinks while con-

nected to the NissanConnect® Ser-

vices Response Center.

.Even when the indicator light is illumi-

nated, connection to the NissanCon-

nect® Services Response Center may

not be possible. If this occurs in an

emergency situation, contact the

authorities by other means.

.To avoid disconnecting the line, do not

turn off the engine or the hybrid

system.

Condition:

5-16

(117,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

NISSANCONNECT® SERVICES SETTINGS

AIVINJN1-BBEF517A-55F1-402B-8D8A-30E8BDC9B301

The NissanConnect® Services setting can be changed.

1. Push <MENU>.

2. Touch [Info] on the Launch Bar.

3. Touch [NissanConnect Services].

4. Touch [NissanConnect Services Settings].

INFO:

[NissanConnect Services] can also be accessed from [Settings] on the Launch Bar.

Menu Action

[Information Feed Setting] [Edit Feed List] [Sync All Feeds] The latest information feed list is received from the NissanCon-

nect® Services center.

[Initialize Feed List] Returns the feed list to default.

[Delete Message Box] Deletes contents of message box.

[Vehicle Data Sharing] [Share Vehicle Information] Turns the vehicle information sharing function on/off.

[Delete Shared Vehicle Information] Deletes the shared vehicle information.

[Unit ID Information] Displays the Unit ID, TCU (Telematics Control Unit) ID, SIM ID and

VIN Information necessary for user registration.

[Reset all NissanConnect Svcs. Settings to Default] All NissanConnect® Services settings are returned to default.

[Vehicle Data Transmission Setting] When [OK] is touched, data transmission to the NISSAN is enabled.

Touch [Decline] to disable the NissanConnect® Services, Premium

Traffic, Online Search, etc.

5. Information

Condition:

5-17

(118,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

5. Information

SiriusXM® TRAVEL LINK (if so

equipped)

AIVINJN1-20002703-B1B8-4022-8CC0-3025C4D3EEF9

This service provides real-time informa-

tion regarding current weather, fuel

prices, parking information, sports scores,

movie times and stock tickers.

It is necessary to subscribe to use the

SiriusXM® Travel Link information.

The SiriusXM® Travel Link is broadcast to

the vehicle by SiriusXM® Satellite Radio.

WARNING

AIVINJN1-BD315167-249E-4B86-8E38-351CD04B1F27

SiriusXM® Travel Link information is

not a substitute for attentive driving.

Weather conditions change con-

stantly and emergency situations

can arise without warning. Relying

only on SiriusXM® Travel Link informa-

tion could result in serious personal

injury.

VIEWING SiriusXM® TRAVEL LINK

AIVINJN1-507BB217-A929-4212-B9B5-004348ACB884

SiriusXM® Satellite Radio and SiriusXM®

Travel Link subscriptions are sold sepa-

rately or as a package, and are continuous

until you call SiriusXM® to cancel. See

SiriusXM® Customer Agreement for com-

plete terms at www.siriusxm.com (for U.S.)

or www.siriusxm.ca (for Canada).

SiriusXM® Travel Link is available in select

markets.

For more information, refer to the Sir-

iusXM® website or call Listener Care.

SiriusXM® website:

For U.S.

www.siriusxm.com/travellink

For Canada

www.siriusxm.ca/siriusxm-traffic-

services/siriusxm-travel-link/

(English)

www.siriusxm.ca/fr/services-

siriusxm-traffic/siriusxm-travel-link/

(French)

Listener Care:

For U.S.

1-877-447-0011

For Canada

1-877-438-9677

INFO:

.If a subscription is not active for

SiriusXM® Travel Link, a message ap-

pears on the display and information

will not be available.

.SiriusXM® Travel Link information

(such as Weather, Fuel, Parking, etc.)

is available only for areas that the

SiriusXM® provides this information.

.Not all vehicles or devices are capable

of receiving all services offered by

SiriusXM®. Data displays and individual

product availability vary by vehicle

hardware. Current information and

features may not be available in all

locations, or on all receivers. SiriusXM®

is not responsible for any errors or

inaccuracies in the data services or

their use in the vehicle.

Condition:

5-18

(119,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

USING SiriusXM® TRAVEL LINK

GUID-80D05B55-B3F4-42DD-B7AE-A3EF7A404962

1. Push <MENU>.

2. Touch [Info] on the Launch Bar.

Menu item Result

[SXM Weather] [Current Conditions] Current, hourly or 5-day weather information is displayed. Weather

information for nearby location, near the destination and your preferred

city set as a Favorite City can be confirmed. Favorite city can be changed

by touching [Change City].

[Hourly Weather Forecast]

[5-Day Forecast]

[Graphical Map] The weather forecast can be checked on the map. The detailed

information is displayed by touching weather icons. Touch [Legend] to

confirm the meaning of the color displayed, and touch [Filter] to select a

type of the weather information.

[Weather Alerts] Displays the list of weather alerts. The detailed information is displayed by

touching the weather alert. Touch [Voice Alert Settings] to select the

information you wish to get alerts for and to set voice announcement on

or off.

[Alert Map] The weather alerts can be confirmed on the map. The detailed

information is displayed by touching the weather icon. Touch [Legend] to

confirm the weather alerts displayed.

[SXM Sports Scores] Various sports and individual teams can be followed. Touch [Sports] and

select from the list to display information such as news, scores or

upcoming games.

[SXM Stocks] Stock information can be checked.

Touching [Add Stock] will also allow adding a favorite stock. Once a stock

is added, it’s price and trend can be viewed. Red indicates the stock is

down and green indicates the stock is up. Touch [Delete Stock] to delete

the saved stocks. Up to 20 stocks can be saved. Only supported stocks

can be added.

5. Information

Condition:

5-19

(120,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

5. Information

Menu item Result

[SXM Fuel Prices] Displays a list of the nearby gas stations for the current location or

destination. Touch a listed gas station for the detailed information. Touch

[Save] to register in a favorite, and the list is displayed by touching

[Favorite]. Touch [Go Here] to set as a destination. Touch [Delete] to delete

the favorite.

[SXM Parking] Displays a list of the nearby parking areas for the current location or

destination. Touch a listed parking area for the detailed information.

Touch [Save] to register in a favorite, and the list is displayed by touching

[Favorite]. Touch [Go Here] to set as a destination. Touch [Delete] to delete

the favorite.

[SXM Movie Listings] [Favorite Theaters] Displays a list of favorite theaters. Select the theater for detailed

information. Touch [Go Here] to set as a destination. Touch [Movies] on

the list to display a list of movies that are playing at the theater. When

touching a movie on the list, detailed information of the movie can be

checked.

[Nearby Theaters] Displays a list of nearby theaters. Select the theater for detailed

information. Touch [Go Here] to set as a destination. Touch [Save] to set

the theater as a favorite theater which can be listed in the Favorite

Theaters. Touch [Movies] on the list to display a list of movies that are

playing at the theater. When touching a movie on the list, detailed

information of the movie can be checked.

[Current Movies] Displays a list of movies that are currently playing. Touch a movie from

the list to display detailed information. Touch [Theaters] to display the

nearby theaters that are playing the selected movie. Select the theater

from the list and touch [Go Here] to set as a destination. Touch save as a

favorite. Touch [Movies] on the theater list to check the movies that is

playing at the theater.

[Search for a Theater] Search for a theater or movie by inputting the name of the theater or

movie.

[Search for a Movie]

Condition:

5-20

(121,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Apple CarPlay

AIVINJN1-2F4A0198-4EA3-402B-905C-8A97B30EE3C1

WARNING

AIVINJN1-08AE9822-4941-4C3B-8473-E36201B89F4C

.Stop your vehicle in a safe location

and apply the parking brake be-

fore connecting your iPhone® to

the vehicle or operating your con-

nected iPhone® for setup.

.If you are unable to devote full

attention to vehicle operation

while using Apple CarPlay

, pull

off the road to a safe location and

stop your vehicle.

You can use Apple CarPlay

by connect-

ing a compatible iPhone® to your vehicle

via a USB cable.

To connect your iPhone® with the in-

vehicle system, it is recommended to use

the Apple Lightning

cable (Mfi certified)

that was provided with your iPhone®.

With Apple CarPlay

, your in-vehicle sys-

tem can be used as a display and a

controller for some of the iPhone® func-

tions. Apple CarPlay

features Siri® which

enables operations via voice controls. Visit

Apple.com for information about the

functions that are available and details

about Apple’s privacy policy.

Certain vehicle information (e.g. location

and speed) may be shared with your

device while Apple CarPlay

is in use.

Carrier charges may apply to use Apple

CarPlay

COMPATIBILITY

AIVINJN1-57200BDF-E943-45F8-9ED1-7BFD321F3774

The following iPhone® models support

Apple CarPlay

Model Firmware version

iPhone® 5 or la-

ter

iOS 8.4 or later

Refer to the Apple website for more

information.

INFO:

.For best results, always update your

device to the latest software version.

.Apple CarPlay

will take the place of

your Bluetooth® audio and Bluetooth®

Hands-Free Phone functionality.

.Phone menu and access to the con-

nected phone through Voice Recogni-

tion System will be disabled while

Apple CarPlay

is connected. To ac-

cess your phone, use the Siri® function

or select the phone icon in the Apple

CarPlay

top menu screen.

Apple CarPlay

OPERATION

AIVINJN1-A682AF5E-1560-4F44-8560-D04EE0074E05

1. Connect the iPhone® to the USB con-

nection port.

“USB (Universal Serial Bus) con-

nection port and AUX (auxiliary)

input jack” (page 2-14)

2. Depending on the setting, a Startup

Information screen will appear. Touch

[Yes] to use Apple CarPlay

INFO:

If you do not wish to display the

Startup Information screen each time

you activate Apple CarPlay

, turn on

[Don’t Ask Anymore] on the Startup

Information screen. The Startup Infor-

mation screen will not be displayed

from the next Apple CarPlay

activa-

tion. The Startup Information screen

can be set to appear again in the Apple

CarPlay

setting menu.

“Apple CarPlay

settings”

(page 5-22)

3. The Apple CarPlay

screen will ap-

pear. The iPhone® functions displayed

on the screen should now be operable

using the in-vehicle system.

4. To return to the Apple CarPlay

top

menu screen after detailed operation,

touch [ ] on the lower corner of the

5. Information

Condition:

5-21

(122,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

5. Information

Apple CarPlay

screen.

5. To exit the Apple CarPlay

screen,

touch [Nissan] on the Apple CarPlay

screen.

INFO:

When pushing the buttons such as

<MENU> on the control panel, the

corresponding display to the button

is displayed.

6. To return to the Apple CarPlay

screen, take one of the following

actions.

.Touch [CarPlay] on the Launch Bar.

.Touch [Apps] on the information

screen, and then touch [Apple Car-

Play].

INFO:

When your iPhone® is locked, Apple Car-

Play

can still be activated by operating

the iPhone® and allowing Apple CarPlay

activation when asked.

Siri® operation

AIVINJN1-016CA560-9A82-4480-ACFF-C212BEB65587

With Siri®, some of the functions in your

iPhone® can be voice controlled.

Make sure that Siri® on your iPhone® is

turned on.

Activation:

There are two ways to start a Siri® session.

.Push and hold <>on the steering

wheel.

.Touch and hold [ ] at the lower corner

of the Apple CarPlay

screen.

INFO:

.Push <>or touch [ ] to end Siri®

operation.

.Keep the interior of the vehicle as quiet

as possible. Close the windows to

eliminate the surrounding noises (traf-

fic noises, vibration sounds, etc.),

which may prevent the system from

recognizing the voice commands cor-

rectly.

.For functions that can be used with

Siri®, please refer to the Apple website.

Phone operation

AIVINJN1-CA86E5DA-1E0E-4802-B5B9-38BE555174E6

If you wish to use make a call with Apple

CarPlay

, follow the procedure below:

1. Touch [Phone] on the Apple CarPlay

top menu.

2. Operate the screen displayed to make

a call, etc.

Apple CarPlay

SETTINGS

AIVINJN1-65850203-2BC2-4381-947B-B8A88B6EF111

1. Touch [Settings] on the Launch Bar.

2. Touch [Apps].

3. Touch [Apple CarPlay].

Available items:

.[Enable after USB Connection]:

The operation of Apple CarPlay

can

be set when an iPhone® is connected

to the in-vehicle system.

[Always]: Activates Apple CarPlay

automatically when an iPhone® is

connected to the in-vehicle system.

[Ask]: Displays the Startup Information

screen when an iPhone® is connected

to the in-vehicle system.

[Never]: Apple CarPlay

will not acti-

vate even if an iPhone® is connected to

the in-vehicle system.

.[Nissan’s Help for Apple CarPlay]:

Displays helpful tips for Apple Car-

Play

operation.

Condition:

5-22

(123,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

INFO:

Normal voice recognition access to songs

on your iPod® music will not be available

when connected to Apple CarPlay

. To

access to your iPod® music, use the Siri®

function or select the music icon in the

Apple CarPlay

top menu screen.

Apple CarPlay

SYSTEM LIMITA-

TIONS AIVINJN1-DE810B65-32DE-4575-96BD-BF2007415096

For all features of Apple CarPlay

operate correctly, it is necessary to have

a compatible iPhone®, a cellular connec-

tion and a data plan.

When Apple CarPlay

is operating, sys-

tem performance is affected by the

strength of the cellular connection or

performance of the phone itself. If perfor-

mance of the system decreases:

.Disconnect and reconnect your phone

.Cycle phone power off/on to restart

Functionality of Apple CarPlay

may

decrease or be lost if there are changes

to operating systems, hardware, software

or other technologies central to support-

ing the system that are outside of NIS-

SAN’s control. Changing government

regulations may also affect operation of

Apple CarPlay

Android Auto

GUID-412822B5-2ED1-4B16-AFE8-C7987322F2B9

WARNING

GUID-F8F12F7F-E570-4749-8258-40D832DAC37A

.Stop your vehicle in a safe location

and apply the parking brake be-

fore connecting your Android

phone to the vehicle or operating

your connected Android phone for

setup.

.If you are unable to devote full

attention to vehicle operation

while using Android Auto

, pull

off the road to a safe location and

stop your vehicle.

You can use Android Auto

by connect-

ing a compatible Android phone to your

vehicle via a USB cable. It is also recom-

mended to use the Android phone OEM

cable that is compatible with your phone.

With Android Auto

, your in-vehicle sys-

tem can be used as a display and a

controller for some of the Android phone

functions. Voice control of some of the

Android phone functions is also possible

with Android Auto

. Visit www.android.

com for information about the functions

that are available and details about

Google’s privacy policy.

Certain vehicle information (e.g. location

and speed) may be shared with your

device while Android Auto

is in use.

Carrier charges may apply to use Android

Auto

COMPATIBILITY

GUID-182297CC-D302-4CCC-ABC9-9C0A51082A34

Only Android 5.0 (Lollipop) or later ver-

sions are compatible with Android Auto

Refer to the Android Auto

website for

more information.

INFO:

.Download the Android Auto

App

from Google Play

to Android phone

in advance.

.For best results, always update your

device to the latest Android software

and Android Auto

App version. When

you connect the Android phone to the

in-vehicle system, it will automatically

update the Android software and An-

droid Auto

App version.

.Android Auto

will take the place of

your Bluetooth® audio and Bluetooth®

Hands-Free Phone functionality.

.When setting a route with the naviga-

tion system (if so equipped), if you set a

destination with Android Auto

, the

route setting of the navigation system

5. Information

Condition:

5-23

(124,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

5. Information

will be cancelled.

.The Phone menu and access to the

connected phone through the Voice

Recognition System will be disabled

while Android Auto

is connected. To

access your phone, use the Talk to

Google function or select the phone

icon in the Android Auto

top menu

screen.

INITIAL Android Auto

SETTINGS

GUID-52E7591D-B45F-4A36-9262-329DFD5AAF96

Before using Android Auto

, the Android

Auto

App must be downloaded on your

Android phone.

For downloading the Android Auto

App,

refer to the Google Play

website.

It may be necessary to operate the

Android phone when connected first.

Depending on the selection, such as

approval, some of the features of Android

Auto

are not available.

Android Auto

OPERATION

GUID-D0FCADBE-7B14-4C0C-9561-B2096C501B47

Unlock your phone’s screen before con-

necting your Android phone.

1. Connect your Android phone to USB

connection port.

“USB (Universal Serial Bus) con-

nection port and AUX (auxiliary)

input jack” (page 2-14)

2. Depending on the setting, a Startup

Information screen will appear. Touch

[Yes] to use Android Auto

INFO:

.If you do not wish to display the

Startup Information screen each

time you activate Android Auto

turn on [Don’t Ask Anymore] on the

Startup Information screen. The

Startup Information screen will not

be displayed from the next Android

Auto

activation. The Startup In-

formation screen can be set to

appear again in the Android Auto

setting menu.

“Android Auto

settings”

(page 5-25)

.If your Android phone is connected

to the in-vehicle system via Blue-

tooth®, your phone’s Bluetooth® will

be turned on automatically when

Android Auto

is activated. Keep

the Bluetooth® turned on to use the

phone functions.

.Some functions of Android Auto

are not available if the Bluetooth® is

not connected.

3. The Android Auto

top menu screen

will appear. The Android phone func-

tions displayed on the screen should

now be operable using the in-vehicle

system.

4. To exit the Android Auto

screen,

touch [ ] on the Android Auto

screen.

INFO:

When pushing the buttons such as

<MENU> on the control panel, the

corresponding display to the button

is displayed.

5. To return to the Android Auto

screen, take one of the following

actions.

.Touch [ ] on the Launch Bar.

.Touch [Apps] on the information

screen, and then touch [Android

Auto].

Condition:

5-24

(125,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

INFO:

.While Android Auto

is activated on

the Android phone, the phone opera-

tions, such as making or receiving

calls, can only be done with Android

Auto

.Depending on the device, an Android

phone requires MTP mode to be se-

lected in the USB transfer setting.

Talk to Google operation

GUID-AD68865B-24C2-483F-BD02-E7D3E5384D38

Some of the functions on your Android

phone can be voice controlled when

Android Auto

is active.

Activation:

There are two ways to start a Talk to

Google session.

.Push and hold <>on the steering

wheel.

.Touch [ ] on the Android Auto

screen.

INFO:

.Push <>to end voice operation.

.Keep the interior of the vehicle as quiet

as possible. Close the windows to

eliminate the surrounding noises (traf-

fic noises, vibration sounds, etc.),

which may prevent the system from

recognizing the voice commands cor-

rectly.

.For functions that can be used with

the voice operation, refer to the An-

droid Auto

website.

Phone operation

GUID-EFF4E878-069B-4A3E-96E6-19701CFCD403

If you wish to use your phone while

Android Auto

is activated, follow the

procedure below:

1. Touch [ ] on the Android Auto

screen.

2. Operate the screen displayed to make

a call, etc.

Android Auto

SETTINGS

GUID-EC243861-E1D2-4256-996B-13627A0E5F53

1. Touch [Settings] on the Launch Bar.

2. Touch [Apps].

3. Touch [Android Auto].

Available items:

.[Enable after USB Connection]:

The operation of Android Auto

can

be set when the Android phone is

connected to the in-vehicle system.

[Always]: Activates Android Auto

automatically when an Android phone

is connected to the in-vehicle system.

[Ask]: Displays the Android Auto

Startup Information screen when an

Android phone is connected to the in-

vehicle system.

[Never]: Android Auto

will not acti-

vate even if an Android phone is

connected to the in-vehicle system.

.[Nissan’s Help for Android Auto]:

Displays helpful tips for Android

Auto

operation.

Android Auto

SYSTEM LIMITA-

TIONS GUID-8FE5B302-BFD6-4E24-8F49-0F52508F7E4A

For all features of Android Auto

operate correctly, it is necessary to have

a compatible Android phone, a cellular

connection and a data plan.

When Android Auto

is operating, system

performance is affected by the strength of

the cellular connection or performance of

the phone itself. If performance of the

system decreases:

5. Information

Condition:

5-25

(126,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

5. Information

.Disconnect and reconnect your phone

.Close all apps and restart them

.Cycle phone power off/on to restart

It should also be confirmed that the latest

version of both Android OS and the

Android Auto

App are installed on the

cellular phone.

Functionality of Android Auto

may de-

crease or be lost if there are changes to

operating systems, hardware, software or

other technologies central to supporting

the system that are outside of NISSAN’s

control. Changing government regula-

tions may also affect the operation of

Android Auto

SIRI® EYES FREE

GUID-A61C11E5-4853-4AC9-A9BF-F65E9CE25B80

GENERAL INFORMATION

GUID-3B15B02E-D6E1-4E00-8F79-65860CBB3A7F

Apple Siri® Eyes Free personal assistant

can be accessed from the vehicle. Siri®

Eyes Free can be accessed in Siri® Eyes

Free mode to reduce user distraction. In

this mode, Siri® Eyes Free is available for

interaction by voice control. After con-

necting a compatible Apple device by

using Bluetooth®, Siri® Eyes Free can be

activated by pushing and holding <>

on the steering wheel.

Siri® is a trademark of Apple Inc., regis-

tered in the U.S. and other countries.

INFO:

.Some Siri® Eyes Free functions, such as

opening apps, may not be available

during driving.

.For best results, always update your

device to the latest software version.

.Keep the interior of the vehicle as quiet

as possible. Close the windows to

eliminate the surrounding noises (traf-

fic noises, vibration sounds, etc.),

which may prevent the system from

recognizing the voice commands cor-

rectly.

.For functions that can be used in Siri®

Eyes Free, please refer to the Apple

website.

REQUIREMENTS

GUID-BA846C8D-86D5-4A8B-B490-70A061CFB10A

Siri® is available on the iPhone® 4S or later.

Devices released before iPhone® 4S are

not supported by the Siri® Eyes Free

system.

Visit www.apple.com/ios/siri for details

about device compatibility.

Siri® must be enabled on the phone.

Please check phone settings.

If the device has a lock screen, Siri® must

be accessible from the lock screen. Please

check phone settings.

SIRI® EYES FREE ACTIVATION

GUID-ECB52A61-C423-4ECF-A4DB-B9C5F8D67C32

Siri® Eyes Free function can be activated

using <>on the steering wheel.

“Control buttons and touch screen

display” (page 2-2)

1. Connect a Siri® Eyes Free enabled

iPhone® to the vehicle.

“Setting Bluetooth®” (page 2-26)

2. After the Bluetooth® connection is

established, push and hold <>on

the steering wheel to activate the Siri®

Eyes Free function.

Condition:

5-26

(127,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

OPERATING SIRI® EYES FREE

GUID-6C5993E4-3BF5-459F-9940-E6741860B7A7

1. Push and hold < > on the steering

wheel.

2. Speak your command and then listen

to the Siri® Eyes Free reply.

After starting Siri® Eyes Free, push <>

on the steering wheel again within 5

seconds of the end of the Siri® Eyes Free

announcement to extend the session.

Example 1 - Playing music

1. Push and hold <>on the steering

wheel.

2. Say “Play (artist name, song name,

etc.)”.

3. Your vehicle will automatically change

to Bluetooth® audio or iPod® mode*

when the music starts playing. Mode

selection is determined by the phone.

*: If the iPhone® is also connected with

the USB cable.

If the audio track does not start playing

automatically after Siri® Eyes Free ends,

try changing the track or audio source to

resume playback.

NOTE:

For best results, use the native music

app. Performance of music control func-

tion while using Podcasts, Audiobook or

other third party music apps may vary

and is controlled by the iPhone®.

Example 2 - Replying to text messages

1. If a compatible iPhone® is connected

and “Show Notifications” of the

iPhone® settings is enabled, the vehi-

cle will display a notification for new

incoming text messages.

2. After reading the message, push and

hold <>on the steering wheel.

3. After a beep sounds, say “Text mes-

sage” or a similar command to reply to

the received message using Siri® Eyes

Free.

5. Information

Condition:

5-27

(128,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

5. Information

MEMO

Condition:

5-28

(129,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
6 Navigation (if so equipped)
Safety information .......................................................................... 6-3
Navigation screen ........................................................................... 6-3
Displaying navigation screen ........................................... 6-3
Launch Bar ..................................................................................... 6-3
Map operation .................................................................................... 6-5
Map types ........................................................................................ 6-5
Road color ...................................................................................... 6-7
Moving map ................................................................................... 6-7
Changing scale of map ........................................................ 6-8
Changing map ............................................................................. 6-9
Map settings .............................................................................. 6-10
Setting information on map .......................................... 6-13
Traffic information on map ............................................ 6-14
Map Menu screen .................................................................. 6-14
Setting destination ...................................................................... 6-15
Basic operations ..................................................................... 6-15
Free Text Search ..................................................................... 6-18
Setting home or work location
as destination ........................................................................... 6-19
Finding address ....................................................................... 6-19
Finding points of interest ................................................ 6-20
Searching from previous destinations .................. 6-22
Searching from address book ..................................... 6-22
Setting city center ................................................................. 6-23
Setting with NissanConnect® Services (if
so equipped) .............................................................................. 6-23
Setting intersection .............................................................. 6-25
Setting by phone number ............................................ 6-26
Setting from saved routes ........................................... 6-26
Setting with SiriusXM® Travel Link ......................... 6-27
Setting point on map ....................................................... 6-28
Setting with latitude/longitude ................................ 6-28
Using Door to Door Navigation ................................ 6-28
Options before starting the
route guidance ...................................................................... 6-29
Route guidance ............................................................................. 6-31
About route guidance ...................................................... 6-31
Route menu ............................................................................. 6-34
Canceling Route ................................................................... 6-37
Displaying Turn List .......................................................... 6-37
Setting detour route ......................................................... 6-37
Route Preference ................................................................. 6-38
Recalculating route ............................................................ 6-41
Editing route ............................................................................ 6-41
Guidance settings ............................................................... 6-44
Viewing traffic information .................................................. 6-45
SiriusXM Traffic
TM
information .................................. 6-45
Premium Traffic information ...................................... 6-46
Viewing available traffic information ................... 6-47
Traffic information setting ........................................... 6-49
Storing a location/route ........................................................ 6-49
Storing location .................................................................... 6-49
Storing route ........................................................................... 6-50
Storing avoid area .............................................................. 6-51
Condition:

(130,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Editing stored information ............................................. 6-52

Deleting stored item ............................................................ 6-55

Navigation settings ..................................................................... 6-57

General information for navigation system ............ 6-59

Current vehicle location ................................................... 6-59

Route guidance ....................................................................... 6-62

Route calculation ................................................................... 6-64

How to update map data ................................................ 6-65

Condition:

(131,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

SAFETY INFORMATION

AIVINJN1-86E86BA3-BF7E-40C4-BA2C-BCE97C60A7D2

The navigation system is primarily de-

signed to help you reach your destination.

However, you, the driver, must use the

system safely and properly. Information

concerning road conditions, traffic signs

and the availability of services may not

always be up to date. The system is not a

substitute for safe, proper, and legal driv-

ing.

WARNING

AIVINJN1-43837604-6D3B-4A88-95CC-9A1143515BA5

Do not rely on route guidance alone.

Always be sure that all driving man-

euvers are legal and safe in order to

avoid accidents.

NAVIGATION SCREEN

AIVINJN1-C5FCA318-4BBA-4D15-A857-9B542ACCC9A3

DISPLAYING NAVIGATION SCREEN

AIVINJN1-D8AC00A2-1C2D-4A70-9906-9AEEE4DB75F8

5GB0701X

To display the current location map which

can be operated, push <MENU> and then

touch [Map] on the Launch Bar or push

<MAP>.

Destination settings or other navigation

operations are also available from the

Launch Bar.

LAUNCH BAR

GUID-D5D4DD54-609E-45E6-8000-80EE515CBEAF

The Launch Bar related to operating the

navigation system is displayed on the

current location map screen. Displayed

items vary depending on the route set-

tings.

5GB0699X

After setting the destination

5GB0700X

Before setting the destination

6. Navigation (if so equipped)

Condition:

6-3

(132,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
6. Navigation (if so equipped)
Menu item Action
[Add
Home]/[Go
Home]
[Add Home]:
When the home location is
not stored, a home location
can be stored in the system.
“Storing home or work
location” (page 6-49)
[Go Home]:
When the home location is
stored, sets the home loca-
tion as a destination.
“Setting home or work
location as destination”
(page 6-19)
[POI] Searches for a Points of
Interest to set as a destina-
tion.
“Finding points of in-
terest” (page 6-20)
[Destina-
tion]
Displays the destination
menu.
“Setting destination”
(page 6-15)
[Zoom Out] Zoom out the map.
“Changing scale of
map” (page 6-8)
[Zoom In] Zoom in the map.
“Changing scale of
map” (page 6-8)
[Cancel] Cancels the route guidance.
“Canceling Route”
(page 6-37)
[Route] Displays the route menu
screen.
“Route menu”
(page 6-34)
Condition:
6-4

(133,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

MAP OPERATION

GUID-D4FC98C8-FC44-47CD-AB7C-DFB95B4C855A

MAP TYPES

AIVINJN1-8F144229-3732-40A7-B87E-81F06E4649A2

Two types of map views are available: 2D and 3D.

2D map AIVINJN1-EE372FB2-4CFF-45FF-B632-64E8205D13D0

The 2D map displays the map in a two-dimensional environment similar to a road map.

5GB0703X

Screen information:

Arrow and distance:

Indicates the distance to the next

guide point and the turning direction

at that guide point.

Next street name:

Displays the next street name during

the route guidance.

Waypoint:

Displays the location of the waypoint

that the vehicle will stop by before

heading to the final destination. A

maximum of 20 waypoints can be set.

Destination:

Indicates the location of the final

destination.

Stored location:

Displays the locations that are stored

in the Address Book.

“Storing location” (page 6-49)

The icons can be changed according

to your preferences.

Speed limit icon:

Displays the speed limit of the road

which the vehicle is on.

(if so equipped):

Touch the icon to connect to the

NissanConnect® Services Voice Menu.

“Connecting to Interactive Voice

Menu” (page 5-12)

[ ]

Touch to display the Map Menu.

“Map Menu screen” (page 6-14)

Recommended lane indicator:

When a route is set, the arrow and the

recommended driving lane may be

displayed depending on the road.

6. Navigation (if so equipped)

Condition:

6-5

(134,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
6. Navigation (if so equipped)
Blue: First recommendation
White: Secondary recommendation
Gray: Not recommended
Remaining distance to the destina-
tion:
Indicates the approximate remaining
distance to the destination or the
waypoint. This indicator will appear
when a destination or a waypoint is
set and route guidance is started.
Estimated arrival time:
Indicates the estimated arrival time to
the destination or the waypoint. This
indicator will appear when a destina-
tion or a waypoint is set and the route
guidance is started.
“Guidance settings” (page 6-44)
The Estimated arrival time can be
changed to the trip time.
“Route Preference” (page 6-38)
Suggested route:
Appears in bold blue during route
guidance.
Street name:
Displays the name of the street that
the vehicle is currently driving on.
Vehicle icon:
Indicates the current vehicle location
and the direction that the vehicle is
heading.
Scale indicator:
Indicates the scale of the map.
Traffic reception status indicator:
Indicates the reception condition of
the traffic information.
Touch to display the traffic informa-
tion screen.
“Viewing traffic events from list”
(page 6-47)
[PREMIUM TRAFFIC]:
Displayed when [Use Premium Traffic]
is turned on and the traffic informa-
tion is available.
“Traffic information setting”
(page 6-49)
[SiriusXM TRAFFIC]:
Displayed when [Use Premium Traffic]
is turned off and the traffic informa-
tion is available.
“Traffic information setting”
(page 6-49)
A SiriusXM Traffic
TM
subscription is
necessary to receive SiriusXM® infor-
mation services.
[ ]
Indicates the directional setting of the
map.
Touch to change the map view and
the map orientation.
“Changing map view and map
orientation” (page 6-9)
3D map GUID-C63CE7A8-5F3A-43AB-9739-240E40D6FC71
The 3D map displays the map from an
elevated perspective. In 3D map, it is easy
to recognize an image of the route
because it provides a panoramic view
over a long distance.
5GB0704X
Condition:
6-6

(135,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

INFO:

The 3D map always appears with the

current forward direction facing up.

Building graphics

AIVINJN1-D52D68EF-B8E2-45F4-A665-3D4F393E1605

Building graphics are stored in the map

data for certain areas, and can be dis-

played when the map is zoomed in.

5GB0705X

2D building graphics

5GB0706X

3D building graphics

INFO:

In an area where the building graphics are

not stored in the map data, the normal

map is displayed even when the map is

zoomed in.

ROAD COLOR

AIVINJN1-16035A1E-B7A3-449E-857D-82CE718C0B3B

The road types are differentiated by color.

Color Road type

Dark red Freeway

Light brown Major road

Light green Secondary road

White Local road

MOVING MAP

AIVINJN1-7786F4B5-D56C-4754-9A7C-B9979A7906F1

The map can be scrolled by the touch

panel operations. Map scrolling opera-

tions may be limited while driving.

Touch:

5GB0707X

When a point on the map is touched, the

cross pointer is displayed and the position

touched is moved to the center of the

screen.

After moving the map, touch [ ] on the

map screen or push <MAP> to display the

current location map screen.

Long touch:

Touch the direction to move to. The map

continues to scroll while the screen is

touched.

Drag:

Drag the screen to scroll the map.

Swipe/flick:

Swipe or flick the screen to scroll the map

screen quickly.

6. Navigation (if so equipped)

Condition:

6-7

(136,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

CHANGING SCALE OF MAP

AIVINJN1-9DD1AE71-61BA-4F81-A0EB-6A8BF290FBF9

5GB0708X

To change the map scale, touch [Zoom

Out] or [Zoom In] on the Launch Bar.

Other operation:

While the cross pointer is displayed, the

scale bar can be displayed by touching

the scale indicator on the map.

Touching [ ] or [ ] on the scale bar can

change the map scale while the scale bar

is displayed.

Changing map scale while mov-

ing map GUID-69E6D5AB-95AC-4FEB-BF8F-EAC51A8D9351

The map scale can also be changed by

directly touching the map. Touch the map

to display the cross pointer before per-

forming the scale change.

Pinch-in

5GB0246X

To view a wider area, pinch-in the map

screen.

Pinch-out

5GB0243X

To view the map in detail, pinch-out the

map screen.

INFO:

While driving, pinch-in and pinch-out op-

erations may be disabled.

Map scale

AIVINJN1-254B822A-980F-405F-9359-0273C1E3FD89

Map scale can be selected.

US Units Metric Units

300 mi 500 km

125 mi 200 km

60 mi 100 km

30 mi 50 km

15 mi 25 km

7.5 mi 12.5 km

4 mi 6 km

2 mi 3 km

1 mi 1500 m

1/2 mi 750 m

1/4 mi 400 m

1/8 mi 200 m

1/16 mi 100 m

1/32 mi 50 m

1/64 mi 25 m

Condition:

6-8

(137,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

INFO:

Depending on the map scale, traffic in-

formation icons cannot be displayed on

the map screen.

“Traffic information on map”

(page 6-48)

CHANGING MAP

AIVINJN1-EE435B0C-944B-44A6-A02B-44DFEE72CD3F

Changing map view and map

orientation

AIVINJN1-35401E88-4D28-4449-AE8A-C5939593E4EA

The map view and the map orientation

can be changed by touching [ ] on the

map screen.

The screen will change to North Up,

Heading Up and 3D each time [ ] is

touched.

5GB0751X

North Up

5GB0752X

Heading Up

5GB0704X

INFO:

.You can also change the map view

from the map view settings screen.

“Map settings” (page 6-10)

.A long range map is available that

displays a wider area in the direction

the vehicle is moving in the Heading

Up view.

“Map settings” (page 6-10)

Setting split screen

AIVINJN1-59764D97-54A7-4CDA-A1FE-D6101B420713

Two different maps can be displayed at

once on a screen with the split screen

setting.

5GB0710X

1. Touch [ ] on the map screen.

2. Touch [Map Settings].

3. Touch [Dual Map View].

4. Select [Split: 2D Map] or [Split: 3D Map].

INFO:

The settings on the left split map can be

changed from the navigation settings

menu.

“Map settings” (page 6-10)

6. Navigation (if so equipped)

Condition:

6-9

(138,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

MAP SETTINGS

AIVINJN1-1F6AA0DC-5FB8-4E2E-9C33-C843D820D840

The setup for the map view is performed

from the Settings menu on the touch

screen display.

1. Touch [ ] on the map screen.

2. Touch [Map Settings].

INFO:

[Map Settings] can also be accessed from

[Settings] on the Launch Bar.

“Navigation settings” (page 6-57)

Available setting items may vary depending on models and specifications.

Menu item Action

[Dual Map View] [2D Map] Displays 2D map.

[3D Map] Displays 3D map.

[Split: 2D Map] Displays 2D map on both left and right side of the split screen. You

can see the different scale and settings of 2D maps at the same

time.

[Split: 3D Map] Displays 2D map on the left side and 3D map on the right side of

the split screen.

[Left Side Info] [Intersection] Displays the enlarged view of the next intersection on the left side

of the screen during route guidance.

“Route guidance screens” (page 6-32)

[Turn List] Displays the turn list on the left side of the screen when a route is

set.

“Route guidance screens” (page 6-32)

Condition:

6-10

(139,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Menu item Action

[Drive Report] Displays your Eco drive report on the left side of the screen.

Touch [History] to view the Drive Report history. Touch [Reset] to

clear the past records.

Touch [000] to switch to the full Eco drive report screen.

Push <MAP> to switch to the full map screen.

[Full Map] Displays full map screen.

[Map Icons] Select the categories of POI icons to display on the map screen.

“Displaying map icons” (page 6-13)

[Others] [Map Orientation] The map orientation can be selected from [North Up] or [Heading

Up]. [Map Orientation] is available only when 2D map is displayed.

[Long Range] The position of the vehicle icon is located slightly lower than the

center of the screen to view a wider area in the traveling direction.

Long Range is available only when the map view is in [Heading Up]

mode.

[Left Split Map Set-

tings]

[Map Orientation] The map orientation for the left side of split screen can be selected

from [North Up] or [Heading Up].

[Long Range] With this item turned on, the vehicle position icon on the left

screen will be located slightly lower than the center of the screen

so that a wider area in the traveling direction can be viewed.

Long Range Map View is available only when the left side of split

screen is in [Heading Up] mode.

[Map Scale] Sets the map scale of the left screen.

[Audio Display on Map] Turns on/off the audio information displayed at the top of the

map screen.

[Map Color] Sets map color from Standard, Emphasize Roads, Emphasize Text

and Emphasize Traffic.

[Map Text Size] [Large] Sets the font size of the text displayed on the map screen.

[Medium]

6. Navigation (if so equipped)

Condition:

6-11

(140,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

Menu item Action

[Small]

[Select Text to Display

on Map]

[Place Names] Allows place, facility and road names to be displayed on the map

screen.

[Facility Names]

[Road Names]

[Map Scrolling Information] Information about the location, on which the center of the cross

pointer is placed by scrolling on the map, can be set to be

displayed.

“Displaying map scrolling information” (page 6-13)

[Tracking Dots Dis-

played on Map]

[Show Tracking Dots on

Map]

Turns the route tracking dots display on/off.

[Tracking Dot Distance] Select the interval between tracking dots.

[Delete Track to Current

Location]

Deletes the route tracking dots up to the current location.

[Show All Freeway Exits on Route] Turns on/off the freeway exit information display.

[Auto. Show Turn List on Freeway] The turn list can be displayed automatically while driving on a

freeway.

“Turn list” (page 6-33)

[North Up when Zoomed Out] When this setting is ON, the orientation of the map is automatically

changed to North Up when the widest map scale is selected.

[Auto Zoom] Map scale returns automatically after a certain period of time.

[Back to Map] Back to the current location map.

Condition:

6-12

(141,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

SETTING INFORMATION ON MAP

AIVINJN1-571EE76C-6CCB-4E21-8682-A57D3A386B15

Some information on the map can be

displayed or hidden.

Displaying map icons

AIVINJN1-AA72987D-2743-4761-9338-7DED04C38996

Displays map icons of certain points of

interest (such as restaurants, gas stations,

etc.) on the map.

1. Touch [Settings] on the Launch Bar.

2. Touch [Navigation].

3. Touch [Map Settings].

4. Touch [Map Icons].

5. Touch the preferred icon. The indica-

tor of the selected icon illuminates.

INFO:

.[Map Icons] can also be accessed from

[] on the Map screen.

.If brand icons are registered in the

map data, the brand icons will be

displayed on the map instead of the

general map icons.

Displaying map scrolling informa-

tion AIVINJN1-7E953B13-E5EF-41C1-88FC-C5E9ABF8FE53

5GB0711X

Information about the location on which

the center of the cross pointer is placed

can be set to be displayed.

1. Touch [Settings] on the Launch Bar.

2. Touch [Navigation] and touch [Map

Settings].

3. Touch [Others].

4. Touch [Map Scrolling Information].

5. Touch the preferred information item.

The following information items are

available.

.[Address Book Icons]

.[Traffic Icons]

.[Destination/Waypoint Icons]

.[Show Pop-Up for POIs]

.[Latitude/Longitude Info]

INFO:

.When the settings are turned on,

placing the cross pointer on the icons

will display the information in a Pop-

Up window. The latitude/longitude of

any point on the map where the cross

pointer is located will be displayed on

the bottom left corner of the map

screen.

.When the [ ] is displayed on the Pop-

Up window, the destination can be set

by touching it.

Touching [ ] will display the place

information screen.

On the place information screen,

touch [Call] to call the selected place

if the key is available.

Touch [Go Here] to set the selected

location as the destination.

.Touch [<] or [>] to scroll to the next or

previous page.

6. Navigation (if so equipped)

Condition:

6-13

(142,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
6. Navigation (if so equipped)
TRAFFIC INFORMATION ON MAP
AIVINJN1-76DF2039-9D48-4277-86E8-FF7C624B9B6D
Traffic information can be displayed on
the map.
“Traffic information on map”
(page 6-48)
MAP MENU SCREEN
AIVINJN1-0929BEAC-F11F-4396-A760-B4D3410181E5
Touch [ ] while the current location map
screen or a scrolled map screen is dis-
played to display the menu corresponding
to that screen.
This menu can be used to quickly access
helpful functions, such as setting a desti-
nation or searching for points of interest
nearby.
Current location map screen
AIVINJN1-EA83CF78-70AB-4C26-AB1F-C95D1370CA59
5GB0712X
If [ ] is touched while the current location
map screen is displayed, the following
options are available.
.[Save Location]:
Saves the current vehicle location in
the Address Book.
“Storing location by moving map”
(page 6-50)
.[Points of Interest]:
Searches for the Points of Interest and
set as destinations.
“Finding points of interest”
(page 6-20)
.[Map Settings]:
Map view settings can be changed.
“Map settings” (page 6-10)
.[Map Icons]:
The map icons can be displayed or
hidden by type.
“Displaying map icons” (page 6-13)
.[Traffic Info Settings]:
Set the various functions of the traffic
information.
“Traffic information setting”
(page 6-49)
.[Cancel Route]:
Delete current destination and way-
points.
“Canceling Route” (page 6-37)
Scrolled location map screen
AIVINJN1-A63AF447-9FDA-4980-AA8F-A277E7E58E1F
5GB0806X
If [ ] is touched while the map is scrolled,
the following options are available.
.[New Dest.]:
Sets the map location pointed at by
the cross pointer as a new destination.
“Setting point on map”
(page 6-28)
.[Add to Route]:
Adds the map location pointed at by
the cross pointer as a destination or a
waypoint to the route already set.
“Setting destination or waypoint”
(page 6-41)
.[Nearby POIs]:
Searches for points of interest near
the current vehicle location.
“Finding points of interest”
(page 6-20)
Condition:
6-14

(143,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

.[Save Location]:

Saves the map location pointed at by

the cross pointer in the Address Book.

“Storing location by moving map”

(page 6-50)

.[Delete]:

Deletes a saved location or destination

(waypoint) when the cross pointer is

placed over an icon.

“Deleting individual item on map”

(page 6-56)

SETTING DESTINATION

AIVINJN1-501A39C4-2FAD-451F-B110-26D6B2F785A4

The system can provide route guidance

once a destination is set.

BASIC OPERATIONS

AIVINJN1-F50ACAED-A068-494D-AA64-CD603677AFC9

Displaying destination setting

menu AIVINJN1-B2EBC8BC-3B61-48B8-A7CB-A84B9994A079

There are several methods that can be

used to set a destination. Select a pre-

ferred method for finding and setting a

destination.

5GB0714X

Push <MAP> and then touch [Destination]

on the Launch Bar.

6. Navigation (if so equipped)

Condition:

6-15

(144,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
6. Navigation (if so equipped)
Availability of the destination setting methods varies depending on the models and specifications.
Available destination setting methods:
Setting item Action
[Enter POI/Address] Searches for a destination by inputting the address or POI names.
“Free Text Search” (page 6-18)
[Go Home] Searches for a route from the current location to the previously stored home location.
“Setting home or work location as destination” (page 6-19)
[Street Address] Searches for a destination by address.
“Finding address” (page 6-19)
[Points of Interest] Searches for a destination from various categories.
“Finding points of interest” (page 6-20)
[Previous Destinations] Searches for the destination from the previous destinations and a previous start point.
“Searching from previous destinations” (page 6-22)
[Go to Work] Searches for a route from the current location to the previously stored work location.
“Setting home or work location as destination” (page 6-19)
[Address Book] Searches for a destination from the vehicle Address Book.
“Searching from address book” (page 6-22)
[City Center] Sets the center of a city as the destination.
“Setting city center” (page 6-23)
[NissanConnect Services] Searches for a point of interest via the NissanConnect® Services Data Center.
“Searching by connecting to the internet” (page 6-23)
[Intersection] Sets an intersection as a destination.
“Setting intersection” (page 6-25)
[Phone Number] Searches for a point of interest by a telephone number.
“Setting by phone number” (page 6-26)
[Saved Routes] Sets a route from the saved route data.
“Setting from saved routes” (page 6-26)
[SXM Travel Link] Sets a destination by using the SiriusXM® Travel Link features.
“Setting with SiriusXM® Travel Link” (page 6-27)
Condition:
6-16

(145,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

[By Map] Searches for a destination by map.

“Setting point on map” (page 6-28)

[Latitude/Longitude] Sets a destination from latitude and longitude.

“Setting with latitude/longitude” (page 6-28)

[Door to Door Navigation] Turns on/off Door to Door Navigation.

“Using Door to Door Navigation” (page 6-28)

INFO:

.After setting a destination, the location of the destination can be adjusted and the location can be stored in the Address Book, etc.

“Options before starting the route guidance” (page 6-29)

.The destination can be deleted.

“Canceling Route” (page 6-37)

6. Navigation (if so equipped)

Condition:

6-17

(146,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

Specifying region

AIVINJN1-3E25FCC3-C8B2-44CB-BCC5-732F43DB2522

With some destination setting methods,

state/province and city can be specified

prior to searching for destination loca-

tions.

5GB0715X

1. Push <MAP>.

2. Touch [Destination] on the Launch

Bar.

3. Touch the desired search method.

4. Touch [State/Province] or [City] if dis-

played.

5. Enter the name of the state, province

or city and then touch [List]. A list

screen is displayed.

6. Touch the preferred state, province or

city from the list.

INFO:

.When the system is restarted, the state

and province in which the vehicle is

recognized by the GPS to be located

will be set automatically as a state and

province for location search.

.While entering the data, the expected

words are displayed on the input

screen. The list can be scrolled by

touching [<] or [>].

.Touch [Change Area] to change the

area for conducting the location

search.

.Touch [Current State] to search for the

destination within the state or pro-

vince where the vehicle is currently

located.

.After touching [City], touch [Last 5

Cities] to display the last 5 cities set

as destinations.

.In some cases, when a city name has

been entered, the number of matching

destinations in the “Matches” column

may be different from the number

displayed on the list screen. If this

occurs, enter more characters to

further reduce the number of

matches.

.It is not possible to search for a route

from the continental United States or

Canada to Hawaii, Virgin Islands, Puer-

to Rico, etc.

FREE TEXT SEARCH

GUID-E261FFFD-3EE1-4472-A545-8EB5D1BB81FF

A location or facility can be searched by

inputting POI name or Address.

1. Push <MAP>.

2. Touch [Destination] on the Launch

Bar.

3. Touch [Enter POI/Address].

4. Enter the POI name or address. After

finishing the entry, touch [List]. The

search results are displayed in list.

INFO:

.The result list can switch between

name list and address list by touch-

ing the tab on the upper of the

screen.

.While entering the facility name, the

expected selections are displayed

on the input screen. The list can be

scrolled by touching [<] or [>].

.The entire route is displayed. Touch

[Option] to sort or narrow down the

results.

Condition:

6-18

(147,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

5. Touch the preferred destination from

the list.

6. The entire route is displayed. Touch

[Start] to start route guidance.

Online Search

GUID-D2AAA169-87A7-4617-8B83-C6A9C126CE91

When your vehicle is connecting to a Wi-Fi

network, Online Search can search the

location considering the latest informa-

tion via the on-line network.

1. Touch [Online Search] on the search

result list.

2. The system connects to the on-line

network.

3. The updated search result is displayed.

INFO:

You can also use the Online Search when

a Door to Door Navigation enabled smart-

phone is connected to the vehicle. It may

be charged separately when Door to Door

Navigation is used.

SETTING HOME OR WORK LOCA-

TION AS DESTINATION

AIVINJN1-EFD628DF-FD10-4DDD-BDF4-340E595F2B4E

The home or work location can be quickly

set as the destination if the location is

stored in advance.

1. Push <MAP>.

2. Touch [Destination] on the Launch

Bar.

3. Touch [Go Home] or [Go to Work].

INFO:

If the home or work location is not

stored yet, the system will display a

message asking if you wish to store a

home or work location. Touch [Yes] to

store the home or working place

location.

“Storing home or work location”

(page 6-49)

4. The entire route is displayed. Touch

[Start] to start route guidance.

INFO:

[Go Home] can also be accessed from the

Launch Bar.

Voice command

1. Push <>located on the steering

wheel.

2. After the tone sounds, speak a com-

mand.

Use the following voice command to set

home or work as the destination:

“Go Home”

“Work”

FINDING ADDRESS

AIVINJN1-E974693C-B055-4844-9B8F-849E0623EC34

The system supports searching for a

destination by address.

1. Push <MAP>.

2. Touch [Destination] on the Launch

Bar.

3. Touch [Street Address].

5GB0717X

4. Input the street address.

.Touch [State/Province] to enter the

state or province name.

.Touch [House No. & Street] to enter

the house number and the street

name. If the house number is not

available, touch [No House #].

After finishing the entry, touch [List].

A list of streets is displayed.

6. Navigation (if so equipped)

Condition:

6-19

(148,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

.Touch [City] to enter the city name.

INFO:

.While entering the data, the ex-

pected words are displayed on the

input screen. The list can be scrolled

by touching [<] or [>].

.Touch [Last 5 Cities] to display the

last 5 cities set as destinations.

5. The entire route is displayed. Touch

[Start] to start route guidance.

Voice command

1. Push <>located on the steering

wheel.

2. After the tone sounds, speak a com-

mand.

Use the following voice command to

search for a destination by address:

“Street Address” (if so equipped)

FINDING POINTS OF INTEREST

AIVINJN1-E537C75F-F389-4D0C-BDC4-80E087FFBD4F

This allows you to find a facility by name

or by category. Specify the region and city

of the destination to find it more quickly.

NOTE:

Locations and business hours of facil-

ities are subject to change, which may

not be reflected in the map data. Dou-

ble-check this information before you

go to an emergency facility to ensure

that you can receive the proper support.

Otherwise, you may not receive emer-

gency help when you arrive at the

destination.

A confirmation message also appears

on the navigation screen. Follow the

displayed instructions and check the

items required.

Searching for a Points of Interest

by nameAIVINJN1-42622348-4B68-4A78-9240-986407C6723B

1. Push <MAP>.

2. Touch [POI] on the Launch Bar.

3. Touch [Spell Name]. A character input

screen is displayed.

INFO:

When a route is set, touch [Destination]

on the Launch Bar and select [Points of

Interest] to select [Spell Name].

4. Enter the name of the destination

facility. After finishing the entry, touch

[List]. A list screen is displayed.

INFO:

.While entering the facility name, the

expected selections are displayed

on the input screen. The list can be

scrolled by touching [<] or [>].

.To search for a POI with two or more

words, touch [Space] to enter a

space between each word.

The latest information can be ob-

tained by touching [Online Search],

using an available Wi-Fi network.

“Online Search” (page 6-19)

The following optional functions are

available by touching [Option] on the

list.

.[Along Route]:

If a route is already set, the system

displays only the facilities located

along the route.

Condition:

6-20

(149,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

.[Near Destination]:

If a route is already set, the system

displays only the facilities located

near the destination.

.[Select a City]:

Narrow down the list by specifying

the city.

.[Near Current Location]:

The system displays only the facil-

ities located near the current loca-

tion.

.[Sort]:

The list can be sorted by [By Dis-

tance] or [By Name].

5. Touch the preferred destination facil-

ity from the list.

6. The entire route is displayed. Touch

[Start] to start route guidance.

INFO:

After setting a destination, the location of

the destination can be adjusted and the

location can be saved in the Saved Loca-

tion, etc.

“Options before starting the route

guidance” (page 6-29)

Voice command

1. Push <>located on the steering

wheel.

2. After the tone sounds, speak a com-

mand.

Use the following voice command to

search for Points of Interest from a facility

name:

“Navigate to” (if so equipped)

Searching Points of Interest by

category

AIVINJN1-351BE659-0AB9-473A-AC1A-38ABCADA93D6

1. Push <MAP>.

2. Touch [POI] on the Launch Bar.

3. Touch [All Categories].

4. Touch the preferred category. The

facility list is displayed.

5GB0719X

INFO:

If the selected category has subcate-

gories, a list will be displayed. Select

the preferred subcategory.

The POI categories to be used fre-

quently can be registered in the Points

of Interest menu.

“Customizing POIs ” (page 6-22)

5. Touch [Option] to narrow down, sort

or refresh the list.

“Searching for a Points of Interest

by name” (page 6-20)

6. Touch the preferred destination facil-

ity from the list.

7. The entire route is displayed. Touch

[Start] to start route guidance.

Voice command

1. Push <>located on the steering

wheel.

2. After the tone sounds, speak a com-

mand.

Use the following voice command to

search for Points of Interest from cate-

gory:

“POI by Category”

6. Navigation (if so equipped)

Condition:

6-21

(150,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

Customizing POIs

GUID-E1E635F3-5CB1-44EF-9341-C498E461FE2C

The POI categories displayed in the Points

of Interest menu can be customized.

1. Push <MAP>.

2. Touch [POI] on the Launch Bar.

3. Touch [Customize POIs].

4. Touch the item number to be mod-

ified.

5. Touch the preferred POI category. The

selected POI category is displayed in

the Points of Interest menu.

SEARCHING FROM PREVIOUS

DESTINATIONS

AIVINJN1-CCA4B30F-6D42-498B-97B8-C74AE29C5414

A previous destination or a previous start

point can be set as the destination.

Up to 100 previous destinations will be

automatically stored. If the number of

previous destinations exceeds 100, the

oldest one is automatically deleted and

the new destination is added.

1. Push <MAP>.

2. Touch [Destination] on the Launch

Bar.

3. Touch [Previous Destinations]. A list

screen is displayed.

4. Touch the previous destination or a

previous start point from the list.

5. The entire route is displayed. Touch

[Start] to start route guidance.

Voice command

1. Push <>located on the steering

wheel.

2. After the tone sounds, speak a com-

mand.

Use the following voice commands to

display the previous destinations/start

point list:

“Previous Destinations”

SEARCHING FROM ADDRESS

BOOK AIVINJN1-4C7DF925-9404-4CBE-A2DD-E3DD6D9BAF0B

Locations frequently visited can be stored

in the Address Book and reused to set

destinations.

“Storing location” (page 6-49)

1. Push <MAP>.

2. Touch [Destination] on the Launch

Bar.

3. Touch [Address Book].

5GB0720X

4. Touch the preferred location from the

list.

INFO:

.Touch [Add New] to add a new

location.

.Touch [ ] to edit the saved route.

“Editing stored location”

(page 6-52)

.Selecting [Sort] displays a list of

various sort functions.

— [Sort by Number]:

The Address Book entries are dis-

played in ascending numerical or-

der.

— [Sort by Name]:

The Address Book entries are dis-

played in alphabetic order.

Condition:

6-22

(151,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

— [Sort by Icon]:

By selecting a particular icon, a list

that contains only the Address

Book entries associated with that

icon is displayed.

— [Sort by Group]:

By selecting a particular group (fa-

mily, friends, leisure, etc.), the se-

lected group is displayed at the top

of the list.

5. The entire route is displayed. Touch

[Start] to start route guidance.

Voice command

1. Push <>located on the steering

wheel.

2. After the tone sounds, speak a com-

mand.

Use the following voice command to set a

destination from the Address Book:

“Address Book”

SETTING CITY CENTER

AIVINJN1-1CBCD129-BFBE-47D9-9EF0-BE9DCF8E2B24

It is possible to set the center of a

specified city as a destination.

1. Push <MAP>.

2. Touch [Destination] on the Launch

Bar.

3. Touch [City Center]. A character input

screen is displayed.

4. Enter the name of the city and touch

[List]. A list screen is displayed.

INFO:

.While entering the data, the ex-

pected words are displayed on the

input screen. The list can be scrolled

by touching [<] or [>].

.Touch [Last 5 Cities] to display the

last 5 cities recently set as destina-

tions.

5. Touch the preferred destination from

the list.

6. The entire route is displayed. Touch

[Start] to start route guidance.

Voice command

1. Push <>located on the steering

wheel.

2. After the tone sounds, speak a com-

mand.

Use the following voice command to set

city center as a destination:

“City Center”

SETTING WITH NISSANCONNECT®

SERVICES (if so equipped)

AIVINJN1-9C340FD6-BECA-47BF-B787-9D191405656D

It is possible to set the destination using

the NissanConnect® Services features.

“NissanConnect® Services” (page 5-6)

INFO:

Use of NissanConnect® Services features

is dependent upon a valid subscription

and the telematics device being in opera-

tive condition, as well as cellular connec-

tivity, navigation map data and GPS

satellite signal reception being available.

Searching by connecting to the

internet AIVINJN1-726DA97D-A533-42CE-BF37-EBEE35F369E0

It is possible to find a point of interest by

inputting a keyword and connecting to

the Internet. The searched location can be

set as a destination.

1. Push <MAP>.

2. Touch [Destination] on the Launch

Bar.

3. Touch [NissanConnect Services].

4. Touch [Connected Search].

5. Enter the keyword and touch [List].

The system will connect to the Nissan-

Connect® Services Data Center and

the search results will be displayed.

6. Navigation (if so equipped)

Condition:

6-23

(152,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

6. Touch the preferred destination from

the list.

7. The entire route is displayed. Touch

[Start] to start route guidance.

INFO:

.Connected Search is a NissanCon-

nect® Services feature. It is necessary

to subscribe to NissanConnect® Ser-

vices in order to use the feature.

.The Connected Search can also be set

by pushing <MENU> and touching

[Info] on the Launch Bar, and then

touching [NissanConnect Services].

Using Destination Send to Car

GUID-60E1571B-CE42-4215-AB73-CC0A553CA3C0

Destination Send to Car enables you to

search for destinations from a point of

interest (POI) database accessed within

the NISSAN Owner’s Portal Website.

1. Push <MAP>.

2. Touch [Destination] on the Launch

Bar.

3. Touch [NissanConnect Services].

4. Touch [Destination Send to Car].

5. Select the preferred folder.

6. Select the preferred channel. The list of

destinations set using the NISSAN

Owner’s Portal Website is displayed.

5GB0726X

7. Select the preferred destination from

the list.

INFO:

.Select [Update List] to update the

list of destinations.

.The Destination Send to Car can

also be accessed by pushing

<MENU> and touching [Info] on the

Launch Bar, and then touching

[NissanConnect Services].

8. The entire route is displayed. Touch

[Start] to start route guidance.

Using Journey Planner

GUID-29B1256C-E3A9-41EA-B986-49C11C62B7F2

It is possible to set the route according to

a route plan created in advance using the

NISSAN Owner’s Portal Website.

INFO:

Use of NissanConnect® Services features

is dependent upon a valid subscription

and the telematics device being in opera-

tive condition, as well as cellular connec-

tivity, navigation map data and GPS

satellite signal reception being available.

1. Push <MAP>.

2. Touch [Destination] on the Launch

Bar.

3. Touch [NissanConnect Services].

4. Touch [Journey Planner]. The system

will connect to the NissanConnect®

Services Data Center and display the

Journey Planner list screen.

5GB0727X

5. Select the preferred route plan from

the list.

Condition:

6-24

(153,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

INFO:

.Touch [Update List] to update the

list information.

6. The entire route is displayed. Touch

[Start] to start route guidance.

INFO:

.The Journey Planner can also be set

pushing <MENU> and by touching

[Info] on the Launch Bar, and then

touching [NissanConnect Services].

.Journey Planner is a NissanConnect®

Services feature. Subscription is re-

quired to use the NissanConnect®

Services.

.Refer to the NISSAN Owner’s Portal

Website for how to set the destination

using Journey Planner.

Setting from information feeds

AIVINJN1-97A6CF18-92BA-438F-9AF5-2F0FD2404930

If the downloaded NissanConnect® Ser-

vices information feed has location data,

you can set it as a destination.

“Message Box” (page 5-13)

1. Touch [Info] on the Launch Bar.

2. Touch [NissanConnect Services].

3. Touch [Message Box]. A list screen is

displayed.

4. Touch a preferred information feed.

Searching by using the Interactive

Voice Menu

AIVINJN1-1F38A02D-BB30-4DCA-907E-78AAC84B2952

5GB0697X

It is possible to set a destination by

touching [ ] on the map. You can

choose from the options provided by the

voice guidance and speak your choice, or

ask the NissanConnect® Services Re-

sponse Specialists directly to search for

your destination.

“Connecting to Interactive Voice

Menu” (page 5-12)

SETTING INTERSECTION

AIVINJN1-4599645B-7FEB-4FFC-9904-951F14B57AFC

It is possible to set an intersection of any

two streets as the destination and have

the system calculate a route.

1. Push <MAP>.

2. Touch [Destination] on the Launch

Bar.

3. Touch [Intersection]. The Intersection

screen is displayed.

5GB0721X

4. Input the Intersection.

.Touch [State/Province] to enter the

state or province name if necessary.

.Touch [City] to enter the city name.

.Touch [1st Street] to enter the first

street name. After finishing the

entry, touch [List]. A list screen is

displayed. Select the desired street

name.

.After the first street information is

entered, touch [2nd Street] to enter

the second street name. After fin-

ishing the entry, touch [List]. A list

screen is displayed. Select the de-

sired street name.

5. Touch [OK].

6. The entire route is displayed. Touch

[Start] to start route guidance.

6. Navigation (if so equipped)

Condition:

6-25

(154,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

Voice command

1. Push <>located on the steering

wheel.

2. After the tone sounds, speak a com-

mand.

Use the following voice command to set

an intersection as a destination:

“Intersection” (if so equipped)

SETTING BY PHONE NUMBER

AIVINJN1-87C28043-E7CD-4FB6-9E27-0811FF88248E

If the phone number of a facility is

registered in the map data, it is possible

to search for a facility by entering the

phone number.

INFO:

.If the area code of the specified tele-

phone number does not exist in the

map data, the system cannot search

for the location.

.Only the locations included in the

database in the map data can be

searched for by phone number. Resi-

dential phone numbers cannot be

used to search for a location.

1. Push <MAP>.

2. Touch [Destination] on the Launch

Bar.

3. Touch [Phone Number]. The telephone

number input screen is displayed.

4. Enter the telephone number including

the area code. After finishing entry,

touch [OK].

5. The entire route is displayed. Touch

[Start] to start route guidance.

INFO:

If there are more than one location

registered for the phone number, a list

screen is displayed. Touch an item on the

list to select a preferred location.

SETTING FROM SAVED ROUTES

AIVINJN1-174315DE-CFE8-4311-94E7-67FE9F3D0C92

It is possible to select a preferred route

from the saved routes.

1. Push <MAP>.

2. Touch [Destination] on the Launch

Bar.

3. Touch [Saved Routes]. A list screen is

displayed.

4. Touch the preferred route from the

list.

5GB0722X

5. The entire route is displayed. Touch

[Start] to start route guidance.

INFO:

.Touch [ ] to edit the saved route.

“Editing stored route” (page 6-55)

.The saved route only includes loca-

tions (destination and waypoints) and

route calculation conditions, not the

route itself. Therefore, when the desti-

nation is set using a saved route, a

different route may be suggested if

the current vehicle location is different

from the one when the route was

saved.

.To save the current route, touch [Save

Current Route]. A route can be saved

only when it includes one or more

waypoints.

“Storing route” (page 6-50)

Condition:

6-26

(155,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

SETTING WITH SiriusXM® TRAVEL

LINK GUID-F5FEB20D-E940-4FA5-ABE9-3E9EC86568E3

It is possible to set the destination using

the features of SiriusXM® Travel Link.

“SiriusXM® Travel Link” (page 5-18)

INFO:

A SiriusXM® Travel Link subscription is

necessary to receive SiriusXM® informa-

tion services.

Using SiriusXM® Fuel Prices

GUID-73465726-2D1E-4C80-94A8-CABC3EA5D56B

Set the preferred gas station as the

destination using SiriusXM® Fuel Prices.

1. Push <MAP>.

2. Touch [Destination] on the Launch

Bar.

3. Touch [SXM Travel Link].

4. Touch [SXM Fuel Prices].

5. Touch the preferred gas station from

the list.

Available lists:

[Favorite]:

Displays the gas station saved as the

favorite.

[Nearby]:

Displays the gas station near the

current location.

[Near Dest.]:

Displays the gas station near the

destination.

6. Touch [Go Here].

7. The entire route is displayed. Touch

[Start] to start route guidance.

Using SiriusXM® Parking

GUID-DE37C6C1-F25A-4114-9F1F-D4B1BE3BA75E

Set the preferred parking location as the

destination using SiriusXM® Parking.

1. Push <MAP>.

2. Touch [Destination] on the Launch

Bar.

3. Touch [SXM Travel Link].

4. Touch [SXM Parking Information].

5. Touch the preferred parking location

from the list.

Available lists:

[Favorite]:

Displays the parking location saved as

a favorite.

[Nearby]:

Displays the parking location near the

current location.

[Near Dest.]:

Displays the parking location near the

destination.

6. Touch [Go Here].

7. The entire route is displayed. Touch

[Start] to start route guidance.

Using SiriusXM® Movie Listings

GUID-A19CDCCB-9911-466C-BDF4-D68526655EA9

Set the preferred theater as the destina-

tion using SiriusXM® Movie Listings.

1. Push <MAP>.

2. Touch [Destination] on the Launch

Bar.

3. Touch [SXM Travel Link].

4. Touch [SXM Movie Listings].

5. Search for the theater by the following

methods.

[Favorite Theaters]:

Select from the list of theaters which

have been saved as favorites.

[Nearby Theaters]:

Select from the list of theaters near the

current location.

[Current Movies]:

Select from the list of current movies

and [Theaters]. Select the preferred

theater from the list to set as a

destination.

[Search for a Theater]:

Search for the theater by inputting the

name directly.

6. Navigation (if so equipped)

Condition:

6-27

(156,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

[Search for a Movie]:

Search for the movie by inputting the

title directly.

6. Touch the preferred theater from the

list.

7. Touch [Go Here].

8. The entire route is displayed. Touch

[Start] to start route guidance.

SETTING POINT ON MAP

AIVINJN1-1CECA297-8DF7-4E58-9746-C408EB3A9FBD

It is possible to set a location scrolled to

on the map as the destination and have

the system calculate a route.

1. Push <MAP>.

2. Touch [Destination] on the Launch

Bar.

3. Touch [By Map].

4. Scroll the map, place the cross pointer

over the preferred location, and touch

[OK].

INFO:

The point on the highlighted road

where the center of the cross pointer

is located can be set as a destination.

5. The entire route is displayed. Touch

[Start] to start route guidance.

Other settings

1. Scroll the map, place the cross pointer

over the preferred location, and touch

[].

2. Touch [New Dest.].

3. The entire route is shown on the touch

screen display. Touch [Start] to start

route guidance.

SETTING WITH LATITUDE/LONG-

ITUDE GUID-7434D3F5-2BF7-4F5E-8F39-AD8A6A3A84C1

A destination can be set by specifying the

latitude and longitude of the location.

5GB0728X

1. Push <MAP>.

2. Touch [Destination] on the Launch

Bar.

3. Touch [Latitude/Longitude]. A number

input screen is displayed.

4. Enter latitude and longitude of the

location to be set as a destination

and touch [OK].

5. The location is displayed at the center

of the map. Touch [OK].

6. The entire route is displayed. Touch

[Start] to start route guidance.

INFO:

.To switch between entering latitude

and longitude, move the cursor by

touching [<] and [>].

.Touch [Change] to switch the format

of the latitude and longitude.

.Touch [West] or [East] to set the

appropriate longitude.

.Touch [North] or [South] to set the

appropriate latitude.

.A message will appear if the selected

location is not included in the map

area.

USING DOOR TO DOOR NAVIGA-

TION GUID-1AEB5848-89CB-47EA-BF79-1BF04BA880B4

The destination can be set using a com-

panion smartphone application and

transferred to the vehicle. For detailed

information, see the manual in the Door to

Door Navigation app.

Condition:

6-28

(157,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

INFO:

.The Door to Door Navigation app can

be downloaded from the iTunes App

Store or Google Play

.A user account is required before

logging-in at the first use of the

application.

1. Push <MAP>.

2. Touch [Destination] on the Launch

Bar.

3. Touch [Door-To-Door Navigation] and

check that [Sync with Door-To-Door

Navigation] is turned on.

INFO:

[Sync with Door-To-Door Navigation]

can also be turned on from the navi-

gation settings screen.

“Navigation settings” (page 6-57)

4. Activate the Door to Door Navigation

app on your smartphone.

5. Connect the smartphone to the vehi-

cle via Bluetooth®.

“Setting Bluetooth®” (page 2-26)

INFO:

When using Door to Door Navigation,

turn on the Bluetooth® connection for

both audio and hands-free phone on

the Connections settings screen.

“Connecting cellular phone/audio

device” (page 2-26)

6. Select a destination using the Door to

Door Navigation app on your smart-

phone.

Transfer the destination from the

smartphone to the vehicle.

INFO:

If the destination cannot be trans-

ferred to the vehicle, turn off and then

on the Bluetooth® connection.

“Bluetooth® settings” (page 2-27)

7. A confirmation screen will be dis-

played. Touch [Go Here] and the posi-

tion of the transferred location is

displayed in the preview on the touch

screen display.

INFO:

.Touch [Save] to register the desti-

nation in the address book.

.Touch [Ignore] to cancel the trans-

fer of the destination.

8. The entire route is displayed. Touch

[Start] to start route guidance.

OPTIONS BEFORE STARTING THE

ROUTE GUIDANCE

AIVINJN1-E83C964B-BC32-48FB-AF85-60942AFE2170

Before starting the route guidance, select

menus for route details to modify the

route, preview the turn list, or store the

route.

5GB0736X

.[Start]:

Starts route guidance to the selected

destination.

.[Add to Route]:

Adds a location to the route previously

set.

6. Navigation (if so equipped)

Condition:

6-29

(158,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

.[More Routes]:

Suggests alternative routes.

— [Fastest]

Selects a route that is fastest in

time.

— [ECO]

Selects a route for the energy sav-

ing.

— [Shortest]

Selects a route that is the shortest

in distance.

INFO:

Touch [1type] to display alternative routes

calculated with a route search condition

selected on the [Basic Route Type] setting

screen.

“Route Preference” (page 6-38)

Touch [3types] to display alternative

routes calculated in all three route search

conditions ([Fastest], [ECO] and [Short-

est]).

.[Turn List]:

Displays a detailed turn list. The map

can be displayed and the turn can be

avoided by touching a turning point.

“Displaying Turn List ” (page 6-37)

.[Move Location]:

Displays a map screen and allows the

location of the destination to be ad-

justed.

.[More Options...]:

— [Place Info]

Displays detailed information of the

destination. Touch [Go Here] to set

the destination. Touch [Call] (when

available) to make a phone call to

the facility set as a destination.

— [Save Location]:

Saves the location to the Address

Book.

— [Save Route]:

Store the route for later use.

Condition:

6-30

(159,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

ROUTE GUIDANCE

AIVINJN1-FD38A9D2-BD38-4915-90E1-EFF73D4DAEA9

ABOUT ROUTE GUIDANCE

AIVINJN1-FD5538DC-DAD3-4D25-9388-EEEB98B01107

After setting the route, select [Start] to

start the route guidance.

During route guidance, the system navi-

gates you through the guide points using

visual and voice guidance.

WARNING

AIVINJN1-E0F88CF2-5C7A-4E1E-B116-50BE3E1D0C9B

.The navigation system’s visual and

voice guidance is for reference

purposes only. The contents of

the guidance may be inappropri-

ate depending on the situation.

.Follow all traffic regulations when

driving along the suggested route

(e.g., one-way traffic).

“Route guidance” (page 6-62)

Voice guidance during route gui-

dance AIVINJN1-B9542D5E-9818-4B43-8BA0-4E1F33E37BDB

Basics of voice guidance:

Voice guidance announces which direc-

tion to turn when approaching an inter-

section for which a turn is necessary.

INFO:

.There may be some cases in which

voice guidance and actual road con-

ditions do not correspond. This may

occur because of discrepancies be-

tween the actual road and the infor-

mation on the map data, or may also

be due to the vehicle speed.

.In case voice guidance does not cor-

respond to the actual road conditions,

follow the information obtained from

traffic signs or notices on the road.

.Route guidance provided by the navi-

gation system does not take carpool

lane driving into consideration, espe-

cially when carpool lanes are sepa-

rated from other road lanes.

.The system will announce street

names when the system language is

set to English. Street names are not

announced when the system is set to

French or Spanish.

INFO:

When approaching a guide point (inter-

section or corner) or destination/way-

point during route guidance, voice

guidance announces the remaining dis-

tance and/or turning direction. Push and

hold <MAP> to repeat voice guidance.

6. Navigation (if so equipped)

Condition:

6-31

(160,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

Example of voice guidance:

INI0119“In about one quarter mile (400 me-

ters), right (left) turn.”

“Right (left) turn ahead.”

“In about one quarter mile (400 me-

ters) freeway entrance on your right

onto (road number and direction).”

“Freeway entrance on your right onto

(road number and direction).”

“In about 1 mile (1.6 kilometers), exit on

your right.”

“Take the second exit on your right.”

“You have reached your destination.

Ending route guidance.”

Directions will differ, depending on the

road type.

INFO:

Distances may vary, depending on the

vehicle speed.

Route guidance screens

AIVINJN1-1EC15C97-38ED-4C88-9336-8B6A6573F8DE

Various guidance screens are displayed

on the touch screen display during route

guidance.

The settings of the guidance screens can

be changed.

“Map settings” (page 6-10)

Route guidance on map screen:

5GB0729X

When route guidance starts, the small

turn arrow and the distance to the next

guide point are displayed in the upper left

corner of the map screen. This arrow

indicates the turning direction at the next

guide point (corner or intersection). When

approaching a guide an point, enlarged

intersection view is displayed. Also, there

may be cases where next street names

Condition:

6-32

(161,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

are announced.

Enlarged intersection view:

5GB0730X

When approaching a guide point, the

system automatically changes to the split

screen view and shows an enlarged view

of the intersection on the left side of the

screen. To switch to the full map screen

while the enlarged intersection view is

displayed, push <MAP>. The distance to

the guide point and the name of the next

street to drive on are displayed at the top

of the screen.

Junction guidance:

5GB0731X

While driving on a freeway, when the

vehicle approaches a junction, the system

automatically switches to the split screen

view and displays an enlarged view of the

junction on the left side of the screen.

After the vehicle passes the junction, the

system automatically returns to the full

screen mode. To switch to the full map

screen while the enlarged junction view is

displayed, push <MAP>.

Turn list:

5GB0733X

When [Turn List] in the map settings menu

is turned on, a turn list can be displayed on

the left side of the screen.

“Map settings” (page 6-10)

To switch to the full map screen, push

<MAP>.

The left screen automatically switches to

an enlarged view of the intersection when

approaching a guide point.

With [Auto. Show Turn List on Freeway]

turned on, the turn list will appear auto-

matically when driving on freeways.

“Map settings” (page 6-10)

Selecting a waypoint from the exit

information list:

When exit information is displayed on the

turn list, a waypoint to a facility located

near the freeway exit can be set as a

waypoint. The facility categories that are

not shown with an icon on the turn list

6. Navigation (if so equipped)

Condition:

6-33

(162,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

cannot be selected.

5GB0734X

1. Touch the exit where the exit informa-

tion icon is displayed. The category list

screen is displayed.

2. Touch the POI category. A list of

facilities located near the freeway exit

is displayed.

3. Touch the preferred facility for the

waypoint.

4. The waypoint is set, and the route

search is performed.

“Options before starting the route

guidance” (page 6-29)

5. Touch [Start] to start the route gui-

dance.

ROUTE MENU

AIVINJN1-A1C01E8A-570A-408B-B0D8-CEBD91E269C3

WARNING

AIVINJN1-90C2BA35-9CAB-465C-864F-2531EEB741B5

Always stop the vehicle in a safe

location before modifying the route

conditions. Modifying the route con-

ditions while driving may cause an

accident.

During route guidance, the route condi-

tions can be modified and the route

information can be confirmed. Set route

conditions according to your personal

preference.

5GB0735X

Push <MAP> when a destination is set,

and then touch [Route] on the Launch Bar.

The route menu screen is displayed.

Condition:

6-34

(163,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
Available settings
Menu item Result
[Cancel Route] Cancels the current route guidance.
“Canceling Route” (page 6-37)
[Turn List] Displays the details of the suggested route.
“Displaying Turn List ” (page 6-37)
[Detour] A detour of a specified distance can be calculated.
“Setting detour route” (page 6-37)
[Route Preference] Set the route search conditions.
“Route Preference” (page 6-38)
[Recalculate] Manually search for the route again after changing the search
conditions, etc. and have the system calculate a route.
“Recalculating route” (page 6-41)
[Show Destination] [Move Location] Displays a map screen and allows the location of the destination to be
adjusted.
[Nearby POIs] Search for points of interest near the destination, such as restaurants
and gas stations, etc. The location can be set as a waypoint.
[Save Location] Save the destination in the Address Book.
[Edit/Add to Route] A destination or waypoint can be edited/added to a route that has
already been set.
“Editing route” (page 6-41)
[Guidance Settings] Various guidance settings can be customized.
“Guidance settings” (page 6-44)
[Save Route] The current route (a destination and waypoints) can be saved. A
maximum of 10 routes can be saved. The saved routes can easily be
recalled for future use. Saved route includes only the location
information, not the route itself. Route may vary depending on the
traffic information or other conditions.
6. Navigation (if so equipped)
Condition:
6-35

(164,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

[Map Scroll] Displays the current map screen which can be scrolled to confirm the

location of the destination, waypoints, route, etc.

[Simulation] Simulates the route guidance. This function provides a detailed image

of the route with voice guidance.

The following operations are available:

[]: Pauses the simulation.

[]: Resumes the simulation.

[]: Ends the simulation.

[]: Increases the play speed. 4 levels of speed adjustment are

available.

[]: Decrease the play speed. 4 levels of speed adjustment are

available.

Condition:

6-36

(165,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

CANCELING ROUTE

AIVINJN1-8DC58B15-9628-42A9-83C4-AE2C6B35D56B

It is possible to delete a destination and all

waypoints that have already been set.

1. Push <MAP> and then touch [Route]

on the Launch Bar.

2. Touch [Cancel Route].

3. A confirmation message is displayed.

Touch [Yes] to delete the currently set

destinations and waypoints.

INFO:

.Touching [Cancel] on the Launch Bar

can also delete the destination and

waypoints.

.The deleted destination and way-

points cannot be reactivated.

DISPLAYING TURN LIST

GUID-30EC4F85-30D3-4792-8E7F-3027E110DC66

Displays the details of the suggested

route.

5GB0737X

1. Push <MAP> and then touch [Route]

on the Launch Bar.

2. Touch [Turn List].

Setting avoid road

GUID-0206ED89-2F7C-41C6-8531-0E0C2FD3B109

The detour to avoid a road is available by

touching the road name on the Turn List

display.

1. Touch the road on the list you prefer to

avoid. The position of the selected

intersection is displayed.

2. Touch [Avoid This Road].

INFO:

Touching [Show Map] can confirm the

entire route.

3. Display returns to the turn list. Touch

[Recalculate]. The route is recalcu-

lated.

Touch [Cancel] to cancel the avoid

setting.

SETTING DETOUR ROUTE

AIVINJN1-69587962-3FE9-4EAB-B845-77B0F01E889C

To detour from the suggested route, a

detour distance can be specified.

1. Push <MAP> and then touch [Route]

on the Launch Bar.

2. Touch [Detour].

3. Touch a detour distance.

Available setting items:

.1/4 mile (200 m)

.1/2 mile (500 m)

.1.0 mile (1.0 km)

.3.0 miles (5.0 km)

.5.0 miles (10.0 km)

After calculating the detour, the sys-

tem displays the detour route on the

map.

INFO:

.The detour setting can be canceled by

touching [Cancel Detour].

.When the vehicle has deviated from

the suggested route, [Detour] cannot

be selected.

.If the system cannot calculate a de-

tour with the specified conditions, the

previous suggested route is displayed.

.If the vehicle is traveling very fast, the

detour route may start from a location

that the vehicle has already passed.

6. Navigation (if so equipped)

Condition:

6-37

(166,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

ROUTE PREFERENCE

AIVINJN1-126160A4-D2D4-4B8A-8C2C-7E583DEBCA04

It is possible to set the conditions of the route search.

1. Touch [Settings] on the Launch Bar.

2. Touch [Navigation] and touch [Route Preference].

3. Touch the item you would like to set.

Setting Item Action

[Basic Route Type] [Fastest Route] Prioritizes the use of fastest route.

[Energy-Saving] Prioritizes a route which uses less energy.

[Shortest Distance] Prioritizes the shortest route.

The route may not be the shortest because the system

prioritizes roads that are easy to drive on for safety

reasons.

[Other Routing

Choices]

[Minimize Freeway] Minimizes the use of freeways.

[Minimize Toll Roads] Minimizes the use of toll roads.

[Time Restricted

Roads]

[Use Restriction Info] Calculates route taking time restriction information into

consideration.

[Do Not Use Restriction Info] Calculates route without taking time restriction informa-

tion into consideration.

[Avoid] Calculates route avoiding the use of time restricted roads.

[Seasonal Restricted

Roads]

[Use Restriction Info] Calculates route taking seasonal restriction information

into consideration.

[Do Not Use Restriction Info] Calculates route without taking seasonal restriction

information into consideration.

[Avoid] Calculates route avoiding the use of seasonal restricted

roads.

Condition:

6-38

(167,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

[Use Traffic Informa-

tion]

[Auto] Calculates the route automatically taking traffic informa-

tion into consideration.

[Accept] If a traffic jam or incident occurs, a confirmation screen will

appear before calculation.

[OFF] Calculates the route without taking traffic information

into consideration.

[Use Avoid Area Settings] When enabled, the system avoids the previously defined

avoid areas.

[Use Ferries] Includes the use of ferries.

[Use Car-Carrying Trains] Includes the use of car-carrying trains.

[Use Unpaved Roads] Includes the use of unpaved roads.

[Use HOV Lanes] Includes the use of HOV lanes.

[Customize More

Routes]

[3types] Calculates 3 types of route when confirming other routes.

[1type] Calculates an alternative route when confirming other

routes.

[Estimated Time] [Destination] Displays the estimated time of arrival or remaining time to

the destination during route guidance.

[Waypoint] Displays the estimated time of arrival or remaining time to

the waypoint during the route guidance.

[Time Shown on

Map]

[ETA] Displays the estimated time of arrival.

[Remaining] Displays the remaining time to arrival.

6. Navigation (if so equipped)

Condition:

6-39

(168,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

INFO:

.If the vehicle greatly deviates from the suggested route, the system calculates a new route.

.Traffic jam information displayed on the map screen is not statistical traffic information.

.If [Do Not Use Restriction Info] is selected for [Time Restricted Roads] setting, the system calculates a route without any

consideration of the regulations concerning the time or day of the week. Therefore, the suggested route may include a road

subject to traffic regulations concerning the time or day of the week. When driving along the route, always follow all traffic

regulations regardless of whether [Time Restricted Roads] is set to be considered or not.

.Even when [Use Traffic Information] is turned on, if traffic information has not been provided for the area, a detour may not always

be indicated in a location where a traffic jam occurs.

.The system calculates to reduce the time required for the entire route from the start to the destination. If there are no appropriate

routes, the system may lead to a route where a traffic jam occurs instead of leading to a detour.

.The system may not lead to a detour if the traffic closure or a traffic jam occurs far from the present location.

Condition:

6-40

(169,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
RECALCULATING ROUTE
AIVINJN1-338AF520-F4FD-419B-8060-6AF4890C9F43
A route can be manually searched again
after changing the search conditions, etc.
1. Push <MAP> and then touch [Route]
on the Launch Bar.
2. Touch [Recalculate]. A message is
displayed and the route is recalcu-
lated.
3. Touch [Start] or conduct other opera-
tions as necessary.
“Options before starting the route
guidance” (page 6-29)
INFO:
.When a waypoint has been set on the
route, the system will search for only
one route, even if route recalculation is
performed.
.When the vehicle deviates from the
suggested route, the route from the
current location to the destination is
automatically searched again by the
Auto Reroute function.
EDITING ROUTE
AIVINJN1-0CFA5674-26DB-4DBD-94B4-07D1D137A60E
5GB0738X
1. Push <MAP> and then touch [Route]
on the Launch Bar.
2. Touch [Edit/Add to Route].
3. Edit the following settings and touch
[Calculate].
Available settings
[Add Destination]:
Touch to add a new destination.
Current destination:
Touch to edit or delete the destina-
tion.
“Editing/deleting destination or
waypoint” (page 6-42)
Criteria for calculating a route to the
destination/waypoint:
Touch to change the conditions for
route calculation.
“Changing route calculation con-
ditions” (page 6-42)
[Add Waypoint]:
Touch to add a waypoint.
“Setting destination or waypoint”
(page 6-41)
Current waypoint:
Touch to edit or delete the waypoint.
“Editing/deleting destination or
waypoint” (page 6-42)
[Calculate]:
After editing the route, touch to
recalculate a route with new condi-
tions.
Setting destination or waypoint
AIVINJN1-0BB2FCA4-907D-47E4-BFE0-38F304C36A5C
A destination or waypoint can be added to
a route that has already been set. Up to 20
waypoints besides one destination can be
set.
1. Push <MAP> and then touch [Route]
on the Launch Bar.
2. Touch [Edit/Add to Route].
6. Navigation (if so equipped)
Condition:
6-41

(170,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

5GB0739X

3. Touch [Add Destination] or [Add Way-

point].

INFO:

If [Add Destination] is selected, the

current destination changes to a way-

point.

4. Set a destination or waypoint. The

method of searching for a destination

or waypoint is the same as the one for

a destination.

“Setting destination” (page 6-15)

5. Touch [Add to Route] to add the

location to the route.

6. The route information with the se-

lected location added to the route is

displayed. Adjust the route calculation

conditions as necessary.

“Changing route calculation con-

ditions” (page 6-42)

7. Touch [Calculate] to confirm the route

change. The route will be recalculated.

INFO:

.The prior route will be deleted auto-

matically.

.Destinations or waypoints can also be

added from the Map Menu.

“Scrolled location map screen”

(page 6-14)

Editing/deleting destination or

waypoint

AIVINJN1-CD749FF6-3A0C-4C28-9B11-71083532CB3D

A destination or waypoint that has al-

ready been set can be modified or deleted.

1. Push <MAP> and then touch [Route]

on the Launch Bar.

2. Touch [Edit/Add to Route].

3. Touch a destination or waypoint that

is already set.

5GB0740X

4. Touch to edit the following settings:

Available settings

.[Delete]:

A selected destination or waypoint

that has already been set can be

deleted.

.[Change Order]:

The order of a destination and

waypoints that are already set can

be changed.

.[Move Destination]:

The location of the destination or

waypoint can be adjusted by mov-

ing the cross pointer across the

map on the touch screen display.

5. Touch [Calculate] to apply the change.

INFO:

If the destination is deleted, the route

guidance will be canceled.

Changing route calculation con-

ditions AIVINJN1-2CFF4089-B7EE-40B4-A210-DBBEF76EF02B

Each section of the route between way-

points can have different route calcula-

tion conditions.

Condition:

6-42

(171,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

5GB0742X

1. Push <MAP> and then touch [Route]

on the Launch Bar.

2. Touch [Edit/Add to Route].

3. Touch the route condition shown on

the preferred section of the route to

the destination or waypoint.

4. Touch the preferred condition.

“Route Preference” (page 6-38)

5. The conditions are changed and the

display returns to the edit route

screen.

6. Touch [Calculate] to apply the change.

INFO:

The recalculated route may not be the

shortest route because the system prior-

itizes roads that are easy to drive on for

safety reasons.

Changing order of destination

and waypoints

AIVINJN1-A503E69F-4403-4F87-813B-70DF8CB10CE1

The order of a destination and waypoints

that are already set can be changed.

5GB0741X

1. Push <MAP> and then touch [Route]

on the Launch Bar.

2. Touch [Edit/Add to Route].

3. Touch a destination or waypoint that

is already set.

4. Touch [Change Order].

5. Touch a preferred destination or way-

point to replace the previously se-

lected destination or waypoint.

6. Touch [Calculate] to apply the change.

6. Navigation (if so equipped)

Condition:

6-43

(172,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

GUIDANCE SETTINGS

AIVINJN1-7A6444E0-AFEC-465E-93B2-F84FA292326B

Various settings are available to customize the guidance information provided by the system.

1. Touch [Settings] on the Launch Bar.

2. Touch [Navigation] and touch [Guidance Settings].

3. Touch an item you would like to set.

Setting item Action

[Guidance Volume] Adjusts the volume level of voice guidance.

[Guidance Voice] Activates or deactivates voice guidance.

[Traffic Announcement] Activates or deactivates the traffic announcement.

When this item is activated, the system provides an announcement of traffic

information or events on the route. The indicator illuminates if traffic announcement

is activated.

[Toll Booth Guide] Activates or deactivates the function to notify that the vehicle is approaching a toll

booth.

INFO:

.[Guidance Settings] can also be accessed from the route menu screen.

“Route menu” (page 6-34)

.The guidance volume can also be adjusted by turning <VOLUME/ >/<VOL/ > or pushing < > on the steering wheel while

voice guidance is being announced.

Condition:

6-44

(173,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

VIEWING TRAFFIC INFORMA-

TION

AIVINJN1-BB5C14C6-68BD-4F62-9328-48182A5DAB5C

Two types of traffic information are avail-

able on this system, SiriusXM Traffic

Information and Premium Traffic Informa-

tion.

To Activate SiriusXM Traffic

Information,

set [Use Premium Traffic] off.

To Activate Premium Traffic Information,

set [Use Premium Traffic] on.

“Traffic information setting”

(page 6-49)

SiriusXM Traffic

INFORMATION

GUID-2EA7DE01-DAE9-4141-81D2-5B22E18AFC54

SiriusXM Traffic

information is a sub-

scription service offered by SiriusXM®

Satellite Radio.

This service provides real-time informa-

tion regarding traffic flow, accidents, road

construction and other incidents, where

available.

SiriusXM Traffic

combines information

from commercial and public traffic data

providers including government depart-

ments of transportation, police, emer-

gency services, road sensors, cameras

and aircraft reports. The traffic informa-

tion is broadcast to the vehicle by the

SiriusXM® satellites. Available traffic infor-

mation on the route the driver selected is

shown on the navigation screen so traffic

conditions between you and the destina-

tion are known. Three types of real-time

traffic information for major roadways are

shown on the navigation system:

* Unscheduled traffic data, for example,

accidents and disabled vehicles.

* Scheduled traffic data, for example, road

construction and road closures.

* Traffic flow information (rate of speed

data).

WARNING

GUID-31935F5C-6104-4689-A71A-6926217ADFE0

SiriusXM Traffic

information is not a

substitute for attentive driving. Traffic

conditions change constantly and

emergency situations can arise with-

out warning. Relying only on SiriusXM

Traffic

information may lead to a

collision and could result in serious

personal injury.

NOTE:

.Turn [Use Premium Traffic] off when

receiving SiriusXM Traffic

informa-

tion.

“Traffic information setting”

(page 6-49)

.Flow information is provided only for

roads equipped with traffic sensors

and is not available in all markets

covered by the service. Flow data

may not be available on portions of a

road that is under construction.

.A SiriusXM Traffic

subscription is

necessary to view Traffic Info.

Notes on SiriusXM Traffic

infor-

mation AIVINJN1-3C768737-3150-4B3D-BA4F-F358165C07E4

.The SiriusXM Traffic

information

service is not provided for some cities.

In addition, the cities for which the

traffic information service is provided

may be changed.

.In some cases, infrastructure pro-

blems may prevent the complete dis-

play of the traffic information. This is

not a malfunction.

.Depending on the traffic information, a

detour route may be slower than the

original route.

6. Navigation (if so equipped)

Condition:

6-45

(174,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

.SiriusXM® Satellite Radio and SiriusXM

Traffic

subscriptions are sold sepa-

rately or as a package, and are con-

tinuous until you call SiriusXM® to

cancel. See SiriusXM® Customer

Agreement for complete terms at the

SiriusXM® website.

SiriusXM® website:

For U.S.

www. siriusxm.com

For Canada

www.siriusxm.ca (English)

www.siriusxm.ca/fr (French)

.SiriusXM® Travel Link is available in

select markets. For more information,

refer to the SiriusXM® website or call

Listener Care.

SiriusXM® website:

For U.S.

www.siriusxm.com/traffic

For Canada

www.siriusxm.ca/siriusxm-traffic-

services/siriusxm-travel-link/

(English)

www.siriusxm.ca/fr/services-

siriusxm-traffic/siriusxm-travel-link/

(French)

Listener Care:

For U.S.

1-877-447-0011

For Canada

1-877-438-9677

.SiriusXM Traffic

is available in over

130 metropolitan markets. For the

most current list of markets covered,

please refer to the SiriusXM® website

or call Listener Care.

SiriusXM® website:

For U.S.

www.siriusxm.com/siriusxmtraffic

For Canada

www.siriusxm.ca/siriusxm-traffic-

services/siriusxm-traffic (English)

www.siriusxm.ca/fr/services-

siriusxm-traffic/siriusxm-traffic

(French)

Listener Care:

For U.S.

1-877-447-0011

For Canada

1-877-438-9677

.Due to road maintenance, infrastruc-

ture problems (e.g. malfunction of

road sensors, outage of central com-

puter of infrastructure) or natural dis-

asters, there are times when some or

all traffic information may not be

available.

.Incident information is based on hu-

man collection. Not all incidents that

have happened are collected and

provided.

.Due to the coverage and quality of

traffic information and road condi-

tions, it is not always possible for the

system to provide the shortest time

route even when traffic information is

considered.

.Traffic information that is displayed

may differ from information from

other media (e.g., radio), as other

media may use different information

sources.

PREMIUM TRAFFIC INFORMATION

GUID-A94853C1-B1CF-48E0-A95F-2CA0EA659488

Real-time traffic information can also be

obtained from Premium Traffic informa-

tion with more street coverage.

The types of event displayed on the

screen are the same as SiriusXM Traffic

Information.

Condition:

6-46

(175,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Premium Traffic information is available

by turning [Use Premium Traffic] on and

connecting a Wi-Fi device or connecting a

smartphone through Wi-Fi.

“Traffic information setting”

(page 6-49)

INFO:

You can also use the Premium Traffic

Information when a Door to Door Naviga-

tion enabled smartphone is connecting to

the vehicle.

“Using Door to Door Navigation”

(page 6-28)

VIEWING AVAILABLE TRAFFIC IN-

FORMATION

AIVINJN1-7D5D383F-5F4C-4E8B-A72D-F7A55E47CC9E

Viewing traffic events from list

AIVINJN1-98BC0A20-0A3E-4182-9DC8-E6BE6A36F52D

1. Push <MENU> and then touch [Info] on

the Launch Bar.

2. Touch [SXM Traffic] or [Premium Traf-

fic]. A list of available types of informa-

tion is displayed.

Available

items

Function

[Show the

Traffic on

the Route]

Displays a list of traffic infor-

mation found on the route

from the current vehicle loca-

tion to the destination. Avail-

able only when a route is set.

[Nearby

Traffic

Info]

Displays a list of available

traffic information around the

current vehicle location.

INFO:

[SXM Traffic] or [Premium Traffic] is

available only when the traffic infor-

mation is received.

3. Touch the preferred item. A list of

available events are displayed.

5GB0743X

4. Touch an event from the list to check

the detailed information and the map.

Touch [Avoid] to search for an alter-

nate route.

Displaying urgent traffic informa-

tion AIVINJN1-640E1972-00BA-4AAB-817F-9DD492D3BEE6

When an urgent event is found around the

current vehicle location, a message pops

up automatically on the touch screen

display with a voice announcement.

The message includes the icon, event

type, event information and the direct

distance from the current location to the

event.

6. Navigation (if so equipped)

Condition:

6-47

(176,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

INFO:

.When there are multiple urgent events,

the event with the shortest direct

distance from the current location is

displayed.

.If the urgent event is on the recom-

mended route, and if a detour is found,

the detour route notification screen is

displayed when the vehicle ap-

proaches the detour point.

Traffic information on map

AIVINJN1-349B2DD4-5AE0-4619-9823-43EBC8BCDC55

Traffic information is displayed on both 2D

and 3D map screens.

Screen information

5GB0753X

Example

Road conditions

Free Flow: Green

Slow traffic: Yellow

Heavy traffic: Red

Road closed and section affected by

serious traffic event: Orange and

white stripes

Queuing traffic: Orange (Premium

Traffic information only)

Traffic information icon:

If a route is not already set, all of the

traffic information icons on the map

screen are displayed in gray. When a

route is already set, the icons on the

route are displayed in color, and the

icons outside the route are displayed

in gray.

: Traffic jam

: Slow traffic

: Traffic flowing freely

: Road closed

: Accident

: Road work

: Narrow lanes

: All other events

Remaining distance and estimated

remaining time to the destination/

time of arrival calculated with con-

sideration of traffic information on

route.

Whether to display the remaining

time to the destination or estimated

arrival time at the destination can be

selected.

“Route Preference” (page 6-38)

Traffic indicator:

SiriusXM Traffic

Displayed when there is available

SiriusXM Traffic

Information re-

ceived.

Premium Traffic

Displayed when there is available

Premium Traffic Information re-

ceived.

A SiriusXM Traffic

subscription is

necessary to view traffic information.

INFO:

Traffic icons are displayed in the scale

level of 1/64 miles (15 m) - 7.5 miles (12.5

km) range. Some traffic icons are dis-

played only on the map at higher detail

levels.

Condition:

6-48

(177,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

TRAFFIC INFORMATION SETTING

AIVINJN1-9E862250-858D-4540-8106-66DE14C1E881

Settings for traffic information related

functions can be changed.

5GB0750X

1. Touch [Settings] on the Launch Bar.

2. Touch [Navigation].

3. Touch [Traffic Info Settings].

4. Touch the preferred setting. The in-

dicator for the selected setting illumi-

nates.

Available setting items

.[Use Premium Traffic]:

Turns the Premium Traffic information

on/off.

.[Filter Traffic Icons]:

Selects which types of traffic incidents

(e.g., accident) will be displayed on the

map screen.

.[Premium Traffic Update Settings]:

Sets the update timing of Premium

Traffic information.

INFO:

Even when [Traffic Announcement] is set

to off, the route guidance will not be

affected. Also, the announcement of

emergency information and weather in-

formation will not be turned off.

STORING A LOCATION/ROUTE

AIVINJN1-D56E2757-E480-448D-84DE-0D0260214C62

STORING LOCATION

AIVINJN1-544965B9-F333-49EA-BE90-4D6BE51EE5F0

Often visited locations can be stored in

the Address Book. The stored addresses

can be easily retrieved to set them as a

destination or waypoint. The Address

Book can store up to 200 locations.

Storing home or work location

AIVINJN1-18F9446E-22F6-4B69-B465-63E96AFC7E1D

A home or work location can be stored in

the system.

5GB0744X

1. Touch [Settings] on the Launch Bar.

2. Touch [Navigation] and touch [Ad-

dress Book].

3. Touch [Add Home Location] or [Add

Work Location].

4. Touch an appropriate method to set

the location. Refer to the search meth-

ods used for destination setting.

“Setting destination” (page 6-15)

6. Navigation (if so equipped)

Condition:

6-49

(178,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

When stored, the location is displayed

at the center of the map on the touch

screen display.

5. Edit the contents of the stored item as

necessary and touch [OK].

“Editing stored location”

(page 6-52)

INFO:

If you touch [Go Home (Save Location)] or

[Go to Work (Save Location)] on the

destination screen while the home or

work location is not stored yet, the system

will display a message asking if you wish

to store a home or work location. Touch

[Yes] to store the home or work location.

Storing location by searching

AIVINJN1-6B0517E8-1830-49EB-812C-0BAA64EC0CEA

It is possible to store a location by

searching in various ways.

5GB0720X

1. Touch [Settings] on the Launch Bar.

2. Touch [Navigation].

3. Touch [Address Book].

4. Touch [Saved Locations].

5. Touch [Add New].

6. Touch an appropriate method to set a

location. Refer to the search methods

used for destination setting.

“Setting destination” (page 6-15)

7. Touch [OK].

8. A message is displayed, and the ad-

dress of the location is stored in the

Address Book.

9. Adjust and edit the contents of the

stored item as necessary. Touch [OK]

to confirm.

“Editing stored location”

(page 6-52)

INFO:

.When the location is stored in the

Saved Locations, [Address Book] can

be used to search for the location.

“Searching from address book”

(page 6-22)

.When 200 locations are already stored,

a new location cannot be stored until a

currently stored location is deleted.

Storing location by moving map

AIVINJN1-F725F4DF-5CDD-4070-ADB6-D4BF2474895F

1. Move to the preferred location on the

map and touch [ ] on the touch

screen display.

5GB0745X

2. Touch [Save Location]. A message is

displayed.

3. The icon representing the stored loca-

tion is displayed on the map. Push

<MAP> to return to the current loca-

tion map screen.

STORING ROUTE

AIVINJN1-B3907DCE-924F-48C0-BAC8-A06712252587

A maximum of 10 calculated routes can be

stored. Stored routes can be easily re-

trieved and set as the suggested route.

A route requires at least one waypoint in

order to be stored.

1. Push <MAP> and then touch [Route]

on the Launch Bar.

Condition:

6-50

(179,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

2. Touch [Save Route]. A confirmation

message is displayed. Select [Yes] to

store the current route.

Other settings

A route can also be stored using the

following procedure.

1. Touch [Settings] on the Launch Bar.

2. Touch [Navigation].

3. Touch [Address Book].

4. Touch [Saved Routes].

5. Touch [Save Current Route]. A confir-

mation message is displayed.

6. Confirm the contents of the message

and touch [Yes]. The current route is

stored.

INFO:

.At least 1 waypoint must be set for the

route to be stored.

.A stored route includes only locations

(destination and waypoints) and route

calculation conditions, not the route

itself.

.The route is stored in the first available

position number in the stored routes

list.

.When 10 routes are already stored in

the address book, a new route cannot

be stored until a route is deleted.

“Deleting stored item” (page 6-55)

STORING AVOID AREA

AIVINJN1-495A7589-BA25-41EF-82F6-33DEBDE7742E

An Avoid Area can be stored. The Avoid

Area is an area that can be excluded from

a route, such as a road that is always

congested. Once Avoid Areas are stored,

the system avoids those areas when

calculating a route. Up to 10 Avoid Areas

can be stored.

1. Touch [Settings] on the Launch Bar.

2. Touch [Navigation].

3. Touch [Address Book].

4. Touch [Avoid Area].

5GB0746X

5. Touch [Add New].

Touch an appropriate method to

search for a location.

“Setting destination” (page 6-15)

6. Touch [OK].

7. Adjust the information of the Avoid

Area as necessary.

“Editing avoid area” (page 6-55)

8. Touch [OK] to store the avoid area

information.

INFO:

A maximum of 10 Avoid Areas can be

stored. When 10 Avoid Areas are already

stored, a new Avoid Area cannot be stored

until a currently stored Avoid Area is

deleted.

“Deleting stored item” (page 6-55)

6. Navigation (if so equipped)

Condition:

6-51

(180,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

EDITING STORED INFORMATION

AIVINJN1-39CF1CB1-4830-4B51-BE7E-70154B58A89C

Items stored in the system can be edited.

Editing stored location

AIVINJN1-D9E4FAC6-0EAD-4C1E-9D3C-A1EBC19926E1

1. Touch [Settings] on the Launch Bar.

2. Touch [Navigation] and touch [Address Book].

Setting item Action

[Home Location]* [Edit] [Show Icon on Map] Displays the home icon on the map.

[Icon] Selects a home icon of a preferred design.

[Sound] Sets the type of the alarm that sounds when the

vehicle approaches home.

[Direction] Sets the alarm to sound when approaching from a

specific direction.

[Distance] Sets the alarm to sound when reaching a specific

distance to home.

[Phone No.] Stores the home telephone number.

[Move Location] Adjusts the stored home location.

[Delete] Deletes the stored home location.

[OK] Confirms and saves the edited home information.

[Work Location]* [Edit] [Show Icon on Map] Displays the work icon on the map.

[Icon] Selects a work icon of a preferred design.

[Sound] Sets the type of alarm that sounds when the vehicle

approaches work.

[Direction] Sets the alarm to sound when approaching from a

specific direction.

Condition:

6-52

(181,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

[Distance] Sets the alarm to sound when reaching a specific

distance to work.

[Phone No.] Stores the work telephone number.

[Move Location] Adjusts the stored work location.

[Delete] Deletes the stored work location.

[OK] Confirms and saves the edited work information.

[Saved Locations] [Sort] [Sort by Number] Sorts the saved locations.

“Searching from address book” (page 6-22)

[Sort by Name]

[Sort by Icon]

[Sort by Group]

[Add New] Adds a new location.

“Storing location by searching” (page 6-50)

Saved Location

List

[Edit] [Show Icon on Map] Displays the icon of a stored location on the map.

[Name] Registers a name of the entry.

[Voice Tag] Registers a voice tag for the entry which allows the

entry to be used with the Voice Recognition System.

[Icon] Selects an icon for the entry.

[Sound] Sets the type of the alarm that sounds when the

vehicle approaches the location.

[Direction] Sets the alarm to sound when approaching from a

specific direction.

[Distance] Sets the alarm to sound when reaching a specific

distance to the location.

[Phone No.] Registers a phone number for the location.

6. Navigation (if so equipped)

Condition:

6-53

(182,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

[Group] Registers a group of the entry.

[Entry Numbers] Registers an entry number for the location.

[Move Location] Adjusts the stored location information.

[Delete] Deletes the stored location information.

[OK] Confirms and saves the edited stored location

information.

*: When home or work location has not been stored, [Add Home Location] or [Add Work Location] is displayed and a home or work

location can be stored from the menu.

Condition:

6-54

(183,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Editing stored route

AIVINJN1-FA819EB7-2462-4CCA-9FCA-6945BF4DA07F

1. Touch [Settings] on the Launch Bar.

2. Touch [Navigation] and touch [Ad-

dress Book].

3. Touch [Saved Routes].

4. Touch the preferred saved route from

the list. Saved Routes settings screen

will be displayed.

Setting item Action

[Rename] Changes the saved route

name.

[Replace] Overwrites the saved route

with the current route.

[Delete] Deletes the saved route.

[OK] Applies the edited settings.

Editing avoid area

AIVINJN1-7741D32C-748E-4BE2-9BE8-E72FF75E70C6

1. Touch [Settings] on the Launch Bar

and touch [Navigation].

2. Touch [Address Book] and then touch

[Avoid Area].

3. Touch a preferred Avoid Area from the

list. Avoid Area settings screen will be

displayed.

Setting item Action

[Rename] Changes the name of an

Avoid Area.

[Move Loca-

tion]

Adjusts the Avoid Area lo-

cation.

[Resize Area] Adjusts the size of the

Avoid Area.

[Freeway] Sets the Avoid Area to in-

clude or not include free-

ways.

The color of the Avoid Area

changes depending on the

setting.

Freeway ON: Green

Freeway OFF: Blue

[Delete] Deletes an Avoid Area.

[OK] Applies the edited setting.

DELETING STORED ITEM

AIVINJN1-A49F7444-AEBA-437D-B1BF-DA7457A3F577

The locations and routes in the Address

Book can be deleted. Deleting an indivi-

dual item and deleting all stored items are

available.

INFO:

Deleted items cannot be restored. Before

deleting an item, always make sure that

the item is no longer needed.

6. Navigation (if so equipped)

Condition:

6-55

(184,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

Deleting stored item individually

AIVINJN1-B68C2A81-E5C0-4DB2-A740-FC904C09AB2A

1. Touch [Settings] on the Launch Bar.

2. Touch [Navigation] and touch [Address Book].

3. Touch [Delete Saved Items].

Select the preferred item and touch [Yes] to confirm deletion.

Step 1 Step 2 Action

[Delete Home Location] Deletes home location.

[Delete Work Location] Deletes work location.

[Delete Ad-

dress Book]

[Delete All] Deletes all stored locations.

[Delete One] Deletes a selected stored location.

[Delete Saved

Routes]

[Delete All] Deletes all stored routes.

[Delete One] Deletes a selected stored route.

[Delete Avoid

Areas]

[Delete All] Deletes all Avoid Areas.

[Delete One] Deletes a selected Avoid Area.

[Delete Pre-

vious Desti-

nations]

[Delete All Previous Destina-

tions]

Deletes all of the previous destinations.

[Delete One Previous Destina-

tion]

Deletes a selected previous destination.

[Delete Previous Start Point] Deletes the previous start point.

Deleting individual item on map

AIVINJN1-62D39B7F-7242-4DA7-8F88-21A769ADE3F7

1. Align the cross pointer over the stored

location to be deleted by moving on

the map, and then touch [ ].

5GB0747X

2. Touch [Delete].

3. A confirmation message is displayed.

Confirm the contents of the message

and touch [Yes].

The stored item is deleted from the

Address Book.

Condition:

6-56

(185,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

NAVIGATION SETTINGS

AIVINJN1-9D8690FE-57C7-4383-A650-C4EAEDB9B2D7

The navigation system can be customized according to the user’s preference.

1. Touch [Settings] on the Launch Bar.

2. Touch [Navigation].

3. Touch the item you would like to set.

Available items:

[Map Settings]

Sets the display method and direction of the map.

“Map settings” (page 6-10)

[Guidance Settings]

Sets the various functions for route guidance.

“Guidance settings” (page 6-44)

[Route Preference]

Changes the routing preferences.

“Route Preference” (page 6-38)

[Traffic Info Settings]

Sets the various functions of the Traffic information feature.

“Traffic information setting” (page 6-49)

[Speed Limit Indication on Map]

Turns on/off the speed limit display function. When this item is turned on, a speed limit indicator will appear on the map screen when

available.

[Speed Limit Warning]

Turns on/off the speed limit warning.

6. Navigation (if so equipped)

Condition:

6-57

(186,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

[Speed Limit Sensitivity]

Adjusts the speed limit sensitivity. This function is available when [Speed Limit Warning] is turned on.

[Address Book]

Stores locations and routes. Stored items can be edited or deleted.

“Storing a location/route” (page 6-49)

[Customize POIs]

Sets the POI categories to be displayed on the Points of Interest screen.

“Customizing POIs ” (page 6-22)

[Adjust Current Location]

If the vehicle icon indicating the current vehicle location is not in the correct position, the location of the vehicle icon on the map

screen can be adjusted.

[Delete Saved Items]

Deletes a saved location or route.

“Deleting stored item individually” (page 6-56)

[Delete Previous Destinations]

Deletes all or one of the previous destinations or the previous start point.

“Deleting stored item individually” (page 6-56)

[Sync with Door-To-Door Navigation]

Turns on/off Door to Door Navigation.

“Using Door to Door Navigation” (page 6-28)

[Reset All Navigation Settings to Default]

This resets various settings (display, volume level, etc.) to the default settings.

Condition:

6-58

(187,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

GENERAL INFORMATION FOR

NAVIGATION SYSTEM

AIVINJN1-53E79F5D-9AE6-4984-955E-CB2A39EB4D66

CURRENT VEHICLE LOCATION

AIVINJN1-3DB2B298-7959-42E7-A529-EBC2E6E1A510

Display of current vehicle location

AIVINJN1-AC334D4E-00C5-4F0B-889E-D50DC5D61202

This navigation system combines the data

obtained from the vehicle (by gyro sensor)

and from GPS (Global Positioning System)

satellites to calculate the current location

of the vehicle. This position is then dis-

played throughout route guidance to a

destination.

What is GPS (Global Positioning

System)?

AIVINJN1-A33AD639-F86B-4DA8-B59E-2726CD899634

GPS is a position detecting system that

uses satellites deployed by the U.S. gov-

ernment. This navigation system receives

radio signals from three or more different

satellites that orbit 13,049 miles (21,000

km) above the earth in space, and detect

the position of the vehicle by utilizing the

principle of triangulation.

Positioning adjustment:

When the system judges that the vehicle

position is not accurate based on vehicle

speed and gyro sensor data calculations,

the system will automatically adjust the

position of the vehicle icon using GPS

signals.

Receiving signals from GPS satellites:

The reception of GPS signals can be weak,

depending on the environment. Vehicles

in the following areas/environments may

not receive GPS signals.

NAI0422

*Inside tunnels or parking garages

NAI0423

*In areas with numerous tall buildings

NAI0424

*Under multi-layered highways

6. Navigation (if so equipped)

Condition:

6-59

(188,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

NAI0425

*Areas with numerous tall trees

NAI0713

*In canyons

INFO:

The GPS antenna is located on the instru-

ment panel inside the vehicle. Do not

place any objects, especially cellular

phones or transceivers, on the instrument

panel. Because the strength of the GPS

signal is approximately one billionth of

that of TV waves, phones and transceivers

will affect or may totally disrupt the signal.

Incorrect display of vehicle posi-

tion AIVINJN1-B4EC1A08-66C4-4494-8E5E-6CB5C47F02B9

The following cases may affect the display

accuracy of the vehicle’s position or tra-

veling direction. The accuracy will return

to normal if the driving conditions return

to normal.

NAI0426

*When there is a similar road nearby.

NAI0427

*When the vehicle is traveling in an

area with a grid pattern road system.

NAI0428

*When the vehicle is passing through a

large Y-shaped intersection/junction.

Condition:

6-60

(189,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

NAI0429

*When the vehicle is traveling on a

continuous, slowly curving road.

NAI0430

*When the vehicle is traveling on a road

with repeating S-shaped curves.

NAI0431

*When the vehicle is on a loop bridge.

NAI0432

*When the vehicle is on a snow-cov-

ered or unpaved road.

NAI0433

*When repeatedly turning left or right,

or driving in zigzags.

NAI0434

*When the vehicle is rotated on a

parking lot turntable while the igni-

tion switch placed in the OFF position.

6. Navigation (if so equipped)

Condition:

6-61

(190,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

NAI0435

*When driving on a road not displayed

on the map screen or a road that has

been changed due to additional con-

struction or other reasons.

NAI0436

*When the GPS positioning accuracy is

low.

INFO:

.The vehicle icon may be misaligned

when starting the vehicle just after

starting the engine or the hybrid

system.

.The vehicle icon may also be misa-

ligned if different sized tires or tire

chains are installed.

.The system has a function that auto-

matically corrects the vehicle icon

position when it is misaligned from

the actual position.

.Vehicle position correction by GPS

may not function when the vehicle is

stopped.

.If the vehicle icon position does not

return to normal even after driving for

a while, correct the vehicle icon posi-

tion manually.

Detailed Map Coverage Areas

(MCA) for navigation system

AIVINJN1-A7515219-FB6B-4303-A8B1-B6FF7C9DABCD

This system is designed to help guiding to

the destination, and it also performs other

functions as outlined in this manual.

However, the system must be used safely

and properly. Information concerning

road conditions, traffic signs and the

availability of services may not always be

up-to-date. The system is not a substitute

for safe, proper and legal driving.

Map data covers select metropolitan

areas.

Map data includes two types of areas:

“Detailed coverage areas” providing all

detailed road data and other areas show-

ing “Main roads only”.

INFO:

Detailed map data is not available in many

areas and is generally limited to select

major metropolitan areas.

ROUTE GUIDANCE

AIVINJN1-D4460D59-8C4D-4A28-8361-F3C3C250F896

INFO:

.The system will announce street

names when the system language is

set to English. Street names are not

announced when the system is set to

French or Spanish.

Repeating voice guidance

AIVINJN1-43C350DF-CAB4-4E5D-8440-651D34A03D54

This function is available throughout

route guidance, from the time after the

route calculation is completed until the

vehicle arrives at the destination. Push

and hold <MAP>. Voice guidance will be

repeated.

Condition:

6-62

(191,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Notes on voice guidance

AIVINJN1-D97CC207-69BB-4213-9710-6F7BC47DE9D0

.Voice guidance in this system should

be regarded as a supplementary func-

tion. When driving the vehicle, check

the route on the map and follow the

actual roads and traffic regulations.

.Voice guidance is activated only for

intersections with certain conditions.

There may be cases where the vehicle

has to turn, but voice guidance is not

provided.

.Voice guidance contents may vary,

depending on the direction of the turn

and the type of intersection.

.The voice guidance timing will vary

depending on the situation.

.When the vehicle has deviated from

the suggested route, voice guidance is

not available. The system will not

announce this. Refer to the map and

recalculate the route.

“Recalculating route” (page 6-41)

.Voice guidance may not accurately

correspond with road numbers and

directions at freeway junctions.

.Voice guidance may not accurately

correspond to street names at free-

way exits.

.The displayed street names may

sometimes differ from the actual

names.

.Voice guidance is not available when

the [Guidance Voice] is turned off.

“Volume and Beeps settings”

(page 2-28)

.Voice guidance will start when the

vehicle enters the suggested route.

Refer to the map for directions to the

starting point of the route.

.When approaching a waypoint, voice

guidance will announce, “You have

arrived at waypoint 1 (2, 3, 4,...).” Voice

guidance will switch to the next sec-

tion of the route. When voice guidance

is not available, refer to the map for

directions.

.In some cases, voice guidance ends

before arrival at the destination. Refer

to the destination icon on the map to

reach the destination.

.If the system recognizes on which side

the destination (waypoint) is located,

voice guidance will announce “on the

right/left” after announcing the arrival

at the destination.

.Voice guidance may be partially op-

erational or inoperative due to the

angle of roads at an intersection.

.Because freeway lane information is

available only for approximately 7,000

major freeways in North America, it is

not possible to display information for

all junctions and exits.

.Freeway exit information may differ

from the information on the actual exit

signs.

.Because it is not possible to consider

data concerning roads that are sea-

sonally available or unavailable, a

route may be displayed that does not

match the actual traffic restrictions. Be

sure to follow the actual traffic restric-

tions while driving.

.Canada and Alaska contain many

roads with incomplete map data. As a

result, when searching for a route, the

route may include roads with incom-

plete data. In regions where road data

is not complete, voice guidance may

stop for long periods of time. Be sure

to follow the actual traffic restrictions

while driving.

6. Navigation (if so equipped)

Condition:

6-63

(192,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

ROUTE CALCULATION

AIVINJN1-EE073CB3-3FAF-4421-BD08-BF04F3C95D6B

.There may be cases where carpool

lanes are included on a suggested

route when the automatic rerouting

function is activated, even if the [Time

Restricted Roads] is set to [Use Re-

striction Info] or [Avoid].

“Route Preference” (page 6-38)

.The suggested route may not be the

shortest, nor are other circumstances

such as traffic jams considered.

.Because of the inevitable difference in

road conditions and circumstances

between the time you use this system

and the time the information was

produced for the map data, there

may be discrepancies in roads and

regulations. In such cases, actual road

conditions and regulations take pre-

cedence over map data information.

.During route calculation, the map will

not scroll, however the vehicle icon will

move according to the actual vehicle’s

movement.

.In some cases, after the calculation is

complete, the calculated route may

not be immediately displayed.

.Waypoints that have been passed will

be disregarded by rerouting calcula-

tion.

.If you scroll the map while the sug-

gested route is being drawn, it may

take more time to finish drawing.

.Route calculation may not be com-

pleted in the following cases.

— If there is no main road within a

range of 1.5 miles (2.5 km) from the

vehicle, a message saying so will

appear on the screen. Try recalcu-

lating when the vehicle is closer to a

main road.

— If there is no main road within a

range of 1.5 miles (2.5 km) from the

destination or waypoint, a message

saying so will appear on the screen.

Try setting the location closer to a

main road.

— If the vehicle is too close to the

destination or if there are no roads

to the destination, a message say-

ing so will appear on the screen.

— If it is impossible to reach the

destination or waypoints because

of traffic regulations, etc.

— If the only route to reach the desti-

nation or waypoints is extremely

complicated.

.The following may occur when the

route is displayed.

— If you calculate a route on a main

road, the starting point of the route

may not exactly match the current

vehicle location.

— The endpoint of the route may not

exactly match the destination.

— If you calculate a route on a main

road, the system may display a

route from another main road. This

may be because the position of the

vehicle icon is not accurate. In this

case, park the vehicle in a safe

location and reset the vehicle icon,

or continue driving to see if the

position of the vehicle icon is auto-

matically adjusted before recalcu-

lating the route.

— There are cases in which the system

shows an indirect route to reach

the destination or waypoints, if you

set them from stored or facility

information. In order to correct this,

you must be careful about the

traffic direction, especially when

lanes with different travel directions

are shown separately, such as inter-

changes and service areas.

— This system makes no distinction

between limited traffic control and

total control (blockage). It may

show an indirect route even if the

Condition:

6-64

(193,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

road is usable.

— Even if the ferry preference is set to

OFF, a route that uses a ferry line

may be suggested.

HOW TO UPDATE MAP DATA

GUID-12B14EED-F217-4681-BB6D-9C3DAFF9250C

WARNING

GUID-CD79393A-EF6D-4FAA-9397-0FE0BD57DA67

.Stop your vehicle in a safe location

during the map update operation.

.During the update process, your

vehicle should be kept in a well

ventilated area to avoid the expo-

sure to carbon monoxide. Do not

breathe exhaust gases; they con-

tain colorless and odorless carbon

monoxide. Carbon monoxide is

dangerous. It can cause uncon-

sciousness or death.

Map data can be updated via USB or Wi-Fi.

Updating with USB memory

GUID-038C70A5-969B-4B9E-9A5C-CBEDCE8A4B9B

The navigation map data can be updated

with the latest information by download-

ing a new map database to a USB memory

device and installing it in the vehicle.

For map update, use the USB memory

with the following specifications:

Supported media: USB2.0

Supported file system: FAT32

1. Push <MENU> .

2. Touch [Info] on the Launch Bar and

then touch [System Information].

3. Touch [Map Update].

5GB0748X

4. Touch [Update by USB device].

5. Touch [Save Map Information to USB].

6. Insert blank USB memory device into

the USB connection port.

“USB (Universal Serial Bus) con-

nection port and AUX (auxiliary)

input jack” (page 2-14)

INFO:

If data is in the USB memory, it may be

deleted.

7. Touch [Start].

8. Touch [OK] after saving the map

information to USB.

9. Access to the website (https://apps.

nissan.navshop.com/) with your per-

sonal computer. Download and install

the map update tool in your personal

computer.

INFO:

.From the second time onward, this

operation is not necessary.

.Initially the URL will jump to http://

apps.nissan.navshop.com/en_gb. In

case you change the language/

country on the portal from the flag

icon on top right of the portal page,

this will be remembered at the next

time you access the portal.

10. Download the updated data and store

it in the USB memory with the map

update tool.

11. Push <MENU>.

12. Touch [Info] on the Launch Bar and

then touch [System Information].

13. Touch [Map Update].

14. Touch [Update by USB device].

15. Touch [Install Map Update from USB].

16. Insert the USB memory into the USB

connection port.

A confirmation message is displayed.

6. Navigation (if so equipped)

Condition:

6-65

(194,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

Confirm the contents of the message

and touch [Yes].

17. Touch [OK] after completing the up-

date.

INFO:

.The update can be canceled while

updating by touching [Cancel].

.The navigation system cannot be

operated while the map updates.

.Map data should be updated while

the engine or the hybrid system is

running to prevent discharge of the

vehicle battery.

.Depending on the models, the same

operation can be performed by

touching [Settings] on the Launch

Bar and then touching [System

Update].

Updating using wireless LAN (Wi-

Fi) GUID-EB00AB89-06ED-4BB7-8B78-FF5B1995B4F2

The map data can be updated using the

vehicle Wi-Fi connection. Wi-Fi communi-

cations can be made by using a Wi-Fi

network, smartphone, etc.

“Wi-Fi Setting” (page 2-27)

1. Connect the vehicle to an available Wi-

Fi network.

2. Push <MENU>.

3. Touch [Info] on the Launch Bar and

then touch [System Information].

4. Touch [Map Update].

5. Touch [Update by Smartphone or Wi-Fi

hotspot].

A confirmation message is displayed.

6. Touch [Select Area] , select the area to

be updated, and Touch [OK].

7. Touch [Yes] to update the selected

area.

8. Touch [OK] after completing the up-

date.

INFO:

.The update can be canceled while

updating by touching [Cancel].

.The navigation system cannot be

operated while the map updates.

.Do not turn off the power source of

the smartphone while updating.

.Map data should be updated while

the engine or the hybrid system is

running to prevent discharge of the

vehicle battery.

.The Wi-Fi hotspot communication is

not available on this system.

.The download data size of Map

update for one state (such as Cali-

fornia or New York for example) or

one regional zone (such as Indiana/

Michigan or Hawaii/Alaska/Guam

for example) can vary between 100

MB to 1 GB. Data size in case of

updating multiple states or regional

zones can be over 1 GB. Use of Wi-Fi

hotspot functionality of your smart-

phone for Map updates may incur

additional data charges from your

cellular provider. Please connect to

your home Wi-Fi network to avoid

additional phone data charges.

.Depending on the models, the same

operation can be performed by

touching [Settings] on the Launch

Bar and then touching [System

Update].

Automotive products End User

License Provisions

GUID-3C4B9E94-98F5-4838-9BCF-83365CD53FFB

The following terms and conditions apply

to any use by you of any services provided

by TomTom (the “TomTom Services”). The

services are deemed to be provided by

TomTom Global Content BV. You should

not use the TomTom Services if you

Condition:

6-66

(195,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

cannot agree to the below.

1. GRANT OF LICENSE: The TomTom

Services are provided to you on a

non-exclusive basis and you may only

use the TomTom Services for your

personal use and solely in combina-

tion with the hardware device which is

incorporated into your vehicle. The

license granted is nontransferable. If

any software is provided as part of the

TomTom services the you are only

entitled to use the binary form of such

software and have no right to receive

the source code. If upgrades, updates

or supplements to the TomTom Ser-

vices are obtained or made available

to you, the use of such upgrades,

updates or supplements are subject

to the foregoing unless other terms

accompany such upgrades, updates

or supplements in which case those

terms apply. All other rights not speci-

fically granted under this paragraph

are reserved by TomTom.

2. SAFETY: The TomTom Services are

intended to be used for providing

information and navigation services

related to your journey only and are

not intended to be used as a safety

related tool and cannot warn you

about all dangers and hazards with

respect to the road you are driving.

Therefore, it remains your duty to drive

in a careful and safe manner (paying all

due care and attention to the road) as

well as observing all applicable traffic

regulations and rules. It is your respon-

sibility not to use the TomTom Ser-

vices in a manner that would distract

you from driving safely.

3. UPDATES AND CHANGES TO THE SER-

VICES AND THESE TERMS: TomTom

reserves the right, with or without

notice, to discontinue, update, modify,

upgrade and supplement the Tom-

Tom Services and to modify these

terms.

4. RESTRICTIONS: You are prohibited

from renting, lending, public presenta-

tion, performance or broadcasting or

any other kind of distribution of the

TomTom Services. Other than as per-

mitted by applicable legislation, you

will not, and you will not allow any

person to, copy or modify the Tom-

Tom Services or any part thereof or to

reverse engineer, decompile or disas-

semble the TomTom Services. You

may not use the Services in connec-

tion with any illegal, fraudulent, dis-

honest or unethical activity or

behaviour.

5. OWNERSHIP: All intellectual property

rights related to the TomTom Services

are owned by TomTom and/or its

suppliers.

6. LIMITED WARRANTY:

.YOU ACKNOWLEDGE THAT THE

TOMTOM SERVICES HAVE NOT

BEEN DEVELOPED TO MEET YOUR

INDIVIDUAL REQUIREMENTS AND

THAT IT IS THEREFORE YOUR RE-

SPONSIBILITY TO ENSURE THAT THE

FACILITIES AND FUNCTIONS OF THE

TOMTOM SERVICES MEET YOUR

REQUIREMENTS. TOMTOM DOES

NOT AND CANNOT WARRANT THAT

THE TOMTOM SERVICES OPERATE

UNINTERRUPTED OR ERROR-FREE.

YOU SHOULD BE PARTICULARLY

AWARE OF THE FACT THAT CALCU-

LATION ERRORS MAY OCCUR WHEN

USING SOFTWARE IN A NAVIGATION

SYSTEM WHICH MAY, FOR EXAMPLE,

BE CAUSED BY LOCAL ENVIRON-

MENTAL CONDITIONS AND/OR IN-

COMPLETE DATA. TOMTOM DOES

NOT WARRANT THAT THE TOMTOM

SERVICES ARE CAPABLE OF INTER-

OPERATING WITH ANY OTHER SYS-

TEM, DEVICE OR PRODUCT (E.G.

SOFTWARE OR HARDWARE).

6. Navigation (if so equipped)

Condition:

6-67

(196,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

.WITHOUT LIMITING CLAUSE 6.1

ABOVE, THE TOMTOM SERVICES,

AND ANY RESULTS GENERATED BY

THE SERVICES ARE PROVIDED ON

AN “AS IS” AND WITH ALL FAULTS

BASIS” AND TOMTOM EXPRESSLY

DISCLAIMS ALL OTHER WARRAN-

TIES, EXPRESS OR IMPLIED, INCLUD-

ING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF NON-IN-

FRINGEMENT, MERCHANTABILITY,

SATISFACTORY QUALITY, ACCU-

RACY, TITLE AND FITNESS FOR A

PARTICULAR PURPOSE.

.THE PROVISIONS OF THIS CLAUSE

DO NOT AFFECT ANY OF YOUR

LEGAL RIGHTS UNDER APPLICABLE

MANDATORY NATIONAL LEGISLA-

TION, INCLUDING BUT NOT LIMITED

TO ANY MANDATORY STATUTORY

WARRANTIES. IF ANY PART OF THIS

LIMITED WARRANTY IS HELD TO BE

INVALID OR UNENFORCEABLE, THE

REMAINDER OF THE LIMITED WAR-

RANTY SHALL NONETHELESS RE-

MAIN IN FULL FORCE AND EFFECT.

7. LIMITATION OF LIABILITY:

.TO THE MAXIMUM EXTENT PER-

MITTED BY APPLICABLE LAW,

NEITHER TOMTOM NOR ITS SUPPLI-

ERS, OFFICERS, DIRECTORS OR EM-

PLOYEES SHALL BE LIABLE TO YOU

OR TO ANY THIRD PARTY FOR ANY

DAMAGES, WHETHER DIRECT, SPE-

CIAL, INCIDENTAL, INDIRECT OR

CONSEQUENTIAL (INCLUDING BUT

NOT LIMITED TO, DAMAGES FOR

THE INABILITY TO USE OR ACCESS

THE SERVICES, LOSS OF DATA, LOSS

OF BUSINESS, LOSS OF PROFITS,

BUSINESS INTERRUPTION OR THE

LIKE) ARISING OUT OF OR RELATED

TO THE USE OF, THE INABILITY TO

USE OR ACCESS, OR OTHERWISE

THE PERFORMANCE OF THE SER-

VICES, EVEN IF TOMTOM HAS BEEN

ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES.

.TO THE EXTENT TOMTOM IS NOT

PERMITTED UNDER APPLICABLE

LAW TO EXCLUDE ITS LIABILITY

PURSUANT TO CLAUSE 7.1 ABOVE,

TOMTOM’S TOTAL AGGREGATE LIA-

BILITY TO YOU SHALL BE LIMITED TO

THE AMOUNT OF US $100.00.

.THE ABOVE LIMITATIONS OF LIABI-

LITY UNDER THIS CLAUSE 7 DO NOT:

(I) AFFECT YOUR RIGHTS UNDER ANY

APPLICABLE MANDATORY NA-

TIONAL LEGISLATION; (II) EXCLUDE

OR LIMIT ANY LIABILITY THAT CAN-

NOT BE EXCLUDED OR LIMITED

UNDER APPLICABLE LAW.

8. LINKS TO THIRD PARTY SITES: Tom-

Tom is not responsible for the con-

tents of any third-party sites or

services, any links contained in third-

party sites or services, or any changes

or updates to third-party sites or

services which are delivered by the

TomTom Services or otherwise. Tom-

Tom is providing these links and ac-

cess to third-party sites and services

to you only as a convenience, and the

inclusion of any link or access does not

imply an endorsement by TomTom or

any Third Parties of the third-party site

or service. Any use by you of such links

or third party sites and the manner in

which you use such third party sites

and links shall be your responsibility

and at your risk and you shall not use

them in any illegal or fraudulent man-

ner.

9. TERMINATION AND DIRECT ENFORCE-

MENT: Without prejudice to any other

rights, TomTom may immediately ter-

minate this EULA if you fail to comply

with any of its terms and conditions.

The provisions of this Agreement,

which by their nature are intended to

survive termination, will remain in

effect after termination of this EULA.

Furthermore, you agree that TomTom

Condition:

6-68

(197,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

may directly enforce these terms

against you.

6. Navigation (if so equipped)

Condition:

6-69

(198,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

6. Navigation (if so equipped)

MEMO

Condition:

6-70

(199,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

7 Voice recognition

Voice recognition ............................................................................. 7-2

Using Voice Recognition System .................................. 7-2

Before starting ............................................................................ 7-2

Giving voice commands ...................................................... 7-2

System Voice settings ........................................................ 7-13

Condition:

(200,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

7. Voice recognition

VOICE RECOGNITION

AIVINJN1-FAF38580-C669-4F26-B8D0-7EC58692FC6D

USING VOICE RECOGNITION SYS-

TEM AIVINJN1-1C8F749E-4AF3-47FE-9FE0-7B0B8B8AF458

Initialization

AIVINJN1-60C8EC21-9C96-4FBC-A946-5937BAB414EC

When the ignition switch is in the ON or

ACC position, voice recognition is initia-

lized. When the initialization is complete,

the system is ready to accept voice

commands. If <>on the steering wheel

is pushed before the initialization com-

pletes, the display will show a message to

wait until the system is ready.

BEFORE STARTING

AIVINJN1-17B90F0D-2C92-4147-8CBB-60019E6215D6

To get the best recognition performance

from voice recognition, observe the fol-

lowing items.

.The interior of the vehicle should be as

quiet as possible. Close the windows

to eliminate the surrounding noises

(traffic noise, vibration sounds, etc.),

which may prevent the system from

correctly recognizing the voice com-

mands.

.Wait until the tone sounds before

speaking a command.

.Speak in a natural conversational

voice without pausing between words.

.The system cannot recognize voice

commands spoken from passenger

seats.

GIVING VOICE COMMANDS

AIVINJN1-B79272C7-32FE-481D-B7B3-A50FF427C81A

1. Push < > on the steering wheel.

5GE0058X

Example

2. A list of commands appears on the

screen, and the system provides the

voice menu prompt.

Available category commands are dis-

played on the left side of the screen.

Speak or touch a category command

from the category command list.

INFO:

.Some of the commands for each

category are shown on the right

side of the screen and they can also

be spoken without selecting a ca-

tegory.

.After executing the category com-

mand, only the commands related

to the selected category can be

recognized.

“Command list” (page 7-6)

3. After the tone sounds and the icon on

the screen changes from to ,

speak a command. You can also select

a command by directly touching the

screen, using <>/< >/</>

on the steering wheel, or using <TU-

NE·SCROLL/OK>/<TUNE·SCROLL/

SOUND> (if so equipped) on the con-

trol panel.

INFO:

The Voice Recognition System will

pause its operation when no com-

mand is given after a few prompts.

To resume the operation, push <>

on the steering wheel.

4. Continue to follow the voice menu

prompts and speak the voice com-

mands after the tone sounds until the

preferred operation is executed.

Condition:

7-2

(201,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

INFO:

To exit the Voice Recognition System,

push and hold <>or < > (if so

equipped) on the steering wheel or

<BACK>/<>on the control panel.

Operating tips

AIVINJN1-5EBE1C81-7EAE-4A5C-8323-F92B58DC3259

.Speak a command after the tone.

.If the command is not recognized, the

system will prompt you to speak the

command again. Repeat the com-

mand in a clear voice.

.Touch [ ] on the touch screen or

push <>(if so equipped) on the

steering wheel to return to the pre-

vious screen.

.To adjust the volume of the system

feedback, push <>on the steering

wheel or turn <VOLUME/ >/<VOL/

>while the system is making an

announcement.

.When setting a destination for route

guidance with some search methods,

such as POI, Intersection or City Center

search, the search area is automati-

cally set to the state/province where

your vehicle is located. Change state/

province to change the search area to

another state/province if necessary.

Voice Prompt Interrupt:

In most cases, you can interrupt the voice

feedback to speak the next command by

pushing <>on the steering wheel. After

interrupting the system, wait for a tone

before speaking your command.

One Shot Call:

To use the system faster when making a

call, you may speak the second level

command skipping speaking the first level

command. For example, push <>and

say “Redial” after the tone without first

saying “Phone”.

How to see voice command

screen AIVINJN1-DA7924C7-AD6F-4EBB-A519-06BD7EFD97EA

1. Push < > to display the first screen

of the voice command list.

2. Speak a command or select an item on

the voice command list. The Second

screen is displayed.

3. Speak a command or select an item on

the voice command list. The command

is executed or the next screen for

further command is displayed.

4. Follow the prompts to complete the

commands.

Voice command screens:

5GE0052X

Example

Shows a list of available categories.

Speak a category command or touch

the key of the corresponding cate-

gory.

Touch [Settings] or say "Settings" to

display the system voice settings.

Shows a list of available commands

for the selected category. Speak a

preferred command.

Touch [Help] or say “Help” to hear help

announcements on how to use the

system.

7. Voice recognition

Condition:

7-3

(202,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

7. Voice recognition

INFO:

Push <>to stop the help announce-

ments.

5GE0071X

Example

Previously selected command

Command list

You can speak a command from the

list or touch the corresponding key.

Preferred words can be spoken for

the part of the command enclosed in

< >.

[Previous]/[Next]

Say as a command or touch to go to

the previous/next screen.

5GE0054X

Example

Speak a number from 1 to 5 or touch

an item on the list screen to select the

item.

How to speak numbers

AIVINJN1-71FDCB5E-F8C6-44F6-B150-DA7EA47CDF74

The Voice Recognition System requires

the user to speak numbers in a certain

way when giving voice commands.

General rule:

“500”, “800” and “900” can be pronounced

as “five hundred”, “eight hundred” and

“nine hundred” respectively.

For other numbers, only single digits “0”

(zero) to “9” can be used. (For example, for

the number “600”, speaking “six zero zero”

can be recognized by the system, but “six

hundred” cannot be recognized.)

Example:

1-800-662-6200

“One eight hundred six six two six two zero

zero”

INFO:

For the best recognition, speak “zero” for

the number “0”, and “oh” for the letter “o”.

Voice command examples

AIVINJN1-4B0CA941-EB10-42BC-9DAB-3B5E138B4ADC

As examples, some additional basic op-

erations that can be performed by voice

commands are described here.

Example 1 Placing call by speaking a

phone number:

1. Push <>on the steering wheel.

2. Wait for the indicator to change to .

Speak “Phone”.

5GE0070X

Example

Condition:

7-4

(203,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

3. Speak “Dial <Number>”.

5GE0069X

Example

4. The phone number recognized by the

system is displayed on the screen. If

the number is correct, say “Dial”.

5. The system will make a phone call to

the spoken phone number.

Example 2 Setting home as a destina-

tion (if so equipped):

1. Push <>on the steering wheel.

2. Wait for the indicator change to .

Speak “Navigation”.

5GE0057X

3. Speak “Go Home”. The navigation sys-

tem will set home as a destination.

INFO:

.Location of home must be registered

to the Address Book prior to using this

command.

.The step of speaking “Navigation” can

be omitted.

Example 3 Tuning station of FM:

1. Push <>on the steering wheel.

2. Wait for the indicator to change to .

Speak “Audio”.

3. Speak “Tune FM <name>”. The system

will tune to the FM radio station and

the audio screen will be displayed.

7. Voice recognition

Condition:

7-5

(204,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

7. Voice recognition

Command list

AIVINJN1-F2834C42-3B75-40B0-98AA-9D1DBE4701C9

To use the voice recognition function, you can speak commands in the order of 1st command, 2nd command and 3rd command. You

can also operate the system by directly speaking the 2nd or 3rd command.

Variable numbers or words such as names can be applied in the < > when speaking a command.

Some commands are only for English.

General Command

Command Action

Help Announces how to use voice guidance.

Next Skip to the next page.

Previous Skip to the previous page.

Settings Displays the system voice settings.

Phone Command

Command Action

Call <Name> Makes a call to a contact that is stored in the Quick Dial or phonebook.

Call <Name> Mobile Makes a call to a contact that is stored in the phonebook of the cellular

phone.

Call <Name> Work Makes a call to a contact that is stored in the phonebook selecting

from work.

Call <Name> Home Makes a call to a contact that is stored in the phonebook selecting

from home.

Call <Name> Other Makes a call to a contact that is stored in the phonebook selecting

from other.

Call <Relationship> Makes a call to a contact that is stored in the Quick Dial selecting from

relationship.

Call <Quick Dial Name> Makes a call to a spoken Quick Dial number.

Condition:

7-6

(205,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Command Action

Dial <Number> Makes a call to a spoken phone number.

Quick Dial Makes a call to a contact that is stored in the Quick Dial.

Recent Calls Makes a call from the call history.

Redial Makes a call to the last outgoing phone number.

Read Text You can listen to recent text messages received.

Send Text You can select a text message from a list and send it to a contact name.

Select Phone Use this command to select a phone from a list of the registered

devices.

Siri Activates Siri® Eyes Free.

Voice Assistant Activates Talk to Google.

Operating tips for phone command operation:

.After the command “Call”, a name registered in the phonebook can be spoken for recognition, while a phone number can be

spoken after the command “Dial”. Names from the phonebook cannot be spoken after the command “Dial”.

.The system has the function to read the text messages out loud, but misreading may occur in some cases.

.Even if nicknames such as “Mom” or “Dad” are registered in the cellular phone, the Voice Recognition System recognizes only

names. To have the system recognize the nicknames, register the entries in the [Quick Dial] from the Phone menu.

“Quick Dial” (page 4-13)

7. Voice recognition

Condition:

7-7

(206,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

7. Voice recognition

Navigation command (if so equipped)

Command Action

Street Address <Add.> Used to search for a street address.

Navigate to <name> Speak a POI name to search for as a destination.

Navigate to <Name> <City> <State> Speak a POI name, city and state to search for as a destination.

Navigate to <Name> <State> Speak a POI name and state to search for as a destination.

Nearby <Brand/Chain> Speak a POI brand/chain name to search for a nearby facility.

Nearby <name> Speak a POI name to search for a nearby facility.

POI by Category Use this command to display a list of POI categories.

Go Home Sets a route to your home location.

Previous Destinations Sets a route to a previously entered destination.

Work Sets a route to your work location.

Address Book Use this command to display the locations registered in the Address

Book for destination search.

City Center Sets a route to a city center.

Cancel Route Cancels route and deletes the destination/waypoints.

Recalculate Route Recalculates the route.

Intersection Sets a route to an intersection.

Zoom In <1-13> Increases the magnification of the map by the number of steps

specified.

Zoom out <1-13> Decreases the magnification of the map by the number of steps

specified.

Zoom to Street Level Change to the street map.

Show North Up Sets the 2D full map to North Up.

Show Heading Up Sets the 2D full map to Heading Up.

Show Full Map Displays a full map.

Condition:

7-8

(207,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Command Action

Show Split Map Displays a split map.

Show 2D Map Change the current map to a 2D map.

Show 3D Map Change the current map to a 3D map.

Repeat Instruction Speaks the current navigation guidance.

Voice Guidance On Turns the navigation guidance on.

Voice Guidance Off Turns the navigation guidance off.

Show POI Icons Selects a category of the POI icon you wish to display on the map.

Selected POI icons will be displayed on the map screen.

Remove POI Icons Select a category of the POI icon you wish to delete from the map.

Selected POI icons will be deleted from the map screen.

Operating tips for navigation command operation:

.Depending on the area where the vehicle is located (such as in Puerto Rico, Guam, etc.), the system may not recognize the general

navigation commands.

.Points Of Interest:

— The POI commands searches for Points of Interest registered in the navigation system.

— When searching for POI, the search is conducted within the current state/province or the state/province specified by “Change

State” command. To change the state/province, speak “Change State” after the prompt and then after the next prompt, speak

the name of the state/province for which you wish to conduct the POI search. The state/province will be reset to the current

state each time the voice recognition session is restarted.

— Not all POI main categories can be used for “Navigate to” searches with voice command operations while all registered

categories can be recognized as “Nearby” search.

.Street Address:

— Alphabet letters cannot be included when speaking a house number. When a specified house number cannot be found, a

location representing the address will be displayed.

7. Voice recognition

Condition:

7-9

(208,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

7. Voice recognition

— Speak in a natural conversational speed without pausing between words for better recognition.

— When the system recognizes the command incorrectly, correct the search conditions using commands such as “Change State”,

“Change City”, “Change Street” or “Change House Number”.

Audio Command

Command Action

Play <AM, FM etc.> Plays the preferred music source.

SXM Preset <1-18> Plays the spoken SiriusXM® preset channel.

AM Preset <1-6> Plays the spoken AM preset station.

FM Preset <1-12> Plays the spoken FM preset station.

Tune AM <530-1710> Tunes to the AM band, selecting the station of the preferred frequency.

Tune FM <87.7-107.9> Tunes to the FM band, selecting the station of the preferred frequency.

Tune AM <name> Tunes to the AM band, selecting the station name.

Tune FM <name> Tunes to the FM band, selecting the station name.

Tune SXM <name> Tunes to the SiriusXM® Satellite Radio band, selecting the channel

name.

Tune SXM <number> Tunes to the SiriusXM® Satellite Radio band, selecting the channel

number.

Play Song <name> Plays the music by selecting the track.

Play Album <name> Plays the music by selecting the album.

Play Artist <name> Plays the music by selecting the artist.

Playlist <name> Plays the music by selecting the playlist.

Play Genre <name> Plays the music by selecting the genre.

Show Music List Displays the music list.

Play All Songs Plays all the tracks.

CD Track <number> (if so equipped) Plays the selected track of the CD.

Condition:

7-10

(209,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Operating tips for audio command operation:

.An audio device connected via Bluetooth® cannot be operated with the Voice Recognition System. Source change is only available

for Bluetooth® audio.

.The Voice Recognition System may not function when the song information is too long (artist names, album titles, song titles and

play lists, etc.).

.The SiriusXM® function will not operate without a subscription to SiriusXM® Satellite Radio.

.When playing USB files with the Voice Recognition System, do not pronounce the extension attached to the file name (such as “.

mp3”).

.Song titles registered in ID3 tags cannot be pronounced for voice recognition operation.

.Some audio command may not be recognized when an Android phone is connected and used as a USB audio device.

Information Command (if so equipped)

Command Action

Traffic Displays the traffic information.

Fuel Prices Displays the SiriusXM® Fuel Prices.

Parking Displays the SiriusXM® Parking.

Sports Displays the SiriusXM® Sports.

Stocks Displays the SiriusXM® Stocks.

Movie theaters Displays the SiriusXM® Movie Listings.

Current Weather Displays the nearby weather (current weather).

Weather Map Displays the SiriusXM® Weather map.

5-day Forecast Displays the 5-day Forecast.

6-hour Forecast Displays the 6-hour Forecast.

Where am I? Displays information of the current position.

7. Voice recognition

Condition:

7-11

(210,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

7. Voice recognition

INFO:

A SiriusXM® Travel Link (if so equipped) or SiriusXM Traffic

(if so equipped) subscription is necessary to receive SiriusXM® information

services.

“SiriusXM® Travel Link” (page 5-18)

Condition:

7-12

(211,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

SYSTEM VOICE SETTINGS

AIVINJN1-67D614E7-55A6-4EA8-BDE1-5FF2EFEB3D40

The system voice settings can be changed.

1. Touch [Setting] on the Launch Bar.

2. Touch [System Voice].

3. Touch a preferred item.

Available setting items

Available item Action

[Initial Voice Prompt] When this item is turned on, voice prompts are announced.

[Short Voice Prompts] When this item is turned on, short and minimized voice feedback will be

provided.

[Best Match Lists] [Phonebook] When these items are turned on, the voice recognition results are displayed

on the list in the order of reliable recognition.

[Music Commands]

[Voice Preference] Voice guidance setting can be selected from a male or female voice.

Depending on the language setting, the guidance voice setting cannot be

changed.

[Speech Rate] Adjusts the speech rate of prompt.

INFO:

Depending on the models, these settings menus can also be accessed from [System Voice] on the settings screen.

“Settings menu” (page 2-24)

7. Voice recognition

Condition:

7-13

(212,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

7. Voice recognition

MEMO

Condition:

7-14

(213,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
8 Troubleshooting guide
System unit ........................................................................................... 8-2
Liquid crystal display .............................................................. 8-2
Audio system ...................................................................................... 8-3
HD Radio technology (if so equipped) ...................... 8-3
Compact Disc (CD) player (if so equipped) ............ 8-5
iPod® player ................................................................................... 8-7
USB memory device ................................................................ 8-9
Bluetooth® audio .................................................................... 8-10
Bluetooth® Hands-Free Phone System ....................... 8-12
NissanConnect® Services (if so equipped) ................ 8-16
Apple CarPlay
TM
............................................................................. 8-17
Android Auto
TM
............................................................................... 8-18
Siri® Eyes Free .................................................................................. 8-20
Navigation (if so equipped) ................................................... 8-21
Basic operations ..................................................................... 8-21
Vehicle icon ................................................................................. 8-22
Route calculation and visual guidance ................. 8-24
Voice guidance ........................................................................ 8-26
Traffic information ................................................................ 8-27
Voice recognition .......................................................................... 8-28
Condition:

(214,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

8. Troubleshooting guide

SYSTEM UNIT

AIVINJN1-31400E7C-F4D3-4689-A9F6-88A5A28E5475

LIQUID CRYSTAL DISPLAY

AIVINJN1-EAA5698F-0334-4DAC-A1E3-D24F8C3455F2

Symptom Possible cause Possible solution

The screen is too dark. The cabin temperature is too low. Wait until the cabin temperature becomes

moderate.

Screen brightness is set to the maximum

darkness.

Adjust the brightness setting of the screen.

“Display settings” (page 2-31)

The screen is too bright. Screen brightness is set to the maximum

brightness.

Adjust the brightness setting of the screen.

“Display settings” (page 2-31)

A small black spot or a small bright spot

appears on the screen.

This is a typical phenomenon for liquid crystal

displays.

This is not a malfunction.

A dot or stripe pattern appears on the screen. Electromagnetic waves that are generated

from neon billboards, high voltage electric

power cables, ham radios or other radio

devices equipped to other vehicles may

adversely affect the screen.

This is not a malfunction.

Image lag appears on the screen. This is a typical phenomenon for liquid crystal

displays.

This is not a malfunction.

Image motion displayed on the screen is slow. The cabin temperature is less than 50°F

(10°C).

Wait until the cabin temperature rises to

within 50°F (10°C) and 122°F (50°C).

When looking at the screen from an angle, the

screen lightens or darkens.

This is a typical phenomenon for liquid crystal

displays.

Adjust the brightness setting of the screen.

“Display settings” (page 2-31)

The screen turns blue or an error message is

displayed on the touch screen display.

A system malfunction has occurred. It is recommended that you contact a NISSAN

dealer for an inspection.

Condition:

8-2

(215,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

AUDIO SYSTEM

AIVINJN1-A966E4C8-AA58-414B-9A6A-500CC260D786

HD RADIO TECHNOLOGY (if so equipped)

AIVINJN1-90CF80C5-A2F6-4DD9-AD49-0922798A4C14

Sound AIVINJN1-D717575E-DAAA-47FF-98B5-B90F7B0F8694

Symptom Possible cause Possible solution

Delay in digital audio on HD Radio broadcasts. The radio acquires an analog station first and

blends to an digital signal.

This is not a malfunction.

Audio skips, stutters, or echoes. The radio station has not properly aligned the

digital and analog audio.

Verify correct operation on another station.

Report any station with poor performance.

Volume changing up/down. The radio station has not properly aligned

digital and analog audio level.

Verify correct operation on another station

and check www.hdradio.com for stations in

the area. Report any station with poor

performance.

Sound fading in and out. The transition between analog and digital is

taking place (blending).

Verify transition performance on several sta-

tions in the area. Report any stations with

poor alignment.

Excessive blending (Transition between ana-

log and digital).

The receiver is located near the edge of the

digital coverage area.

Refer to www.hdradio.com to verify radio

stations in your coverage area.

Digital audio not better than analog audio. Audio processing on the digital audio at a

station can potentially decrease the digital

audio sound quality.

Verify correct operation on another station.

Report any station with poor performance.

8. Troubleshooting guide

Condition:

8-3

(216,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

8. Troubleshooting guide

Functional

AIVINJN1-F51DB67F-D5AE-4734-AA5F-5C93EFF31D36

Symptom Possible cause Possible solution

Keep losing my local stations. The digital coverage is slightly less than the

analog signal coverage.

Verify correct operation on another station.

This is expected behavior.

Shadowing (urban/terrain) can cause re-

duced digital coverage.

Verify correct operation on another station.

Some data fields are blank. Text information is sent at the broadcaster’s

discretion.

Verify correct operation on another station.

Report station issues.

Text information is truncated / there appears

to be more available.

The display is limited to a fixed number of

characters and more data is being sent than

can be shown.

This is an intended behavior.

AM reception changes at night. AM stations are required by the government

(FCC) to lower their power at night.

This is not a malfunction.

Condition:

8-4

(217,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

COMPACT DISC (CD) PLAYER (if so equipped)

AIVINJN1-8097E05E-298F-400A-AE85-F2150D8AD7BC

Symptom Possible cause Possible solution

Music cannot be played back. The disc is inserted upside down. Insert a CD with the label side facing up.

Moisture condensation occurs inside the unit. Wait until the moisture evaporates (approxi-

mately 1 hour).

The cabin temperature is too high. Wait until the cabin temperature becomes

moderate.

The disc is scratched or dirty. A disc is not

always playable if it is scratched.

Wipe off any dirt from the disc.

Depending on the condition in which they are

stored, discs may become unreadable due to

deterioration (for example, keeping the discs

in the passenger compartment, etc.).

Change the disc with a deterioration-free

disc. Do not use a deteriorated disc. The label

surface of the disc may crack or chip, and the

layer of the label surface may eventually peel

off.

The compressed audio files cannot be played

back.

If both music CD files (CD-DA data) and

compressed audio files (MP3 data, etc.) are

mixed on one disc, the audio compression

files cannot be played back.

Prepare a disc that includes compressed

audio files only.

The files are not named using characters that

are compliant with the specifications.

Use the character codes and the number of

characters that are compliant with the spe-

cifications for folder names and file names. In

addition, always use “.MP3”, “.WMA”, “.mp3” or “.

wma” for file extensions.

It takes a long time before the music starts

playing.

The disc contains a large amount of data. Some time may be required to check the files.

It is recommended that unnecessary folders

or any files other than compressed audio files

should not be recorded in a disc.

The sound quality is poor. The disc is dirty. Wipe off any dirt from the disc.

8. Troubleshooting guide

Condition:

8-5

(218,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

8. Troubleshooting guide

Symptom Possible cause Possible solution

No sounds are played though the CD play

time is displayed.

The system plays back the first track of the

mix mode disc. (Mix mode is a format in which

data except music is recorded on the first

track and music data is recorded on one

other than the first track in a session.)

Play back music data that is recorded on a

track other than the first track.

Music cuts off or skips. The combination of writing software and

hardware might not match; or the writing

speed, writing depth, writing width, etc. might

not match the specifications.

Create a disc using different writing speed

settings, etc.

The system skips the selected track and

moves to the next track.

A non-MP3/WMA file is given an extension of “.

MP3”, “.WMA”, “.mp3” or “.wma”.

Prepare MP3/WMA files.

The system plays back a file that is prohibited

due to copyright protection.

Prepare playable files.

The tracks do not play back in the desired

order.

The folder locations in the disc are changed

by the writing software while the files are

written in the disc.

Check the settings of the writing software,

and create a new disc.

The CD cannot be ejected. The ignition switch is not placed in the ACC or

ON position.

Place the ignition switch in the ACC or ON

position.

Condition:

8-6

(219,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

iPod® PLAYER

AIVINJN1-4D70A092-9EC2-4F72-A4BF-D040AE970C29

Symptom Possible cause Possible solution

The system does not recognize an iPod®. A connector cable is not correctly connected,

or the iPod® does not correctly operate.

Connect the connector cable again. If the

system does not recognize the iPod® after

performing this procedure above, reset the

iPod®.

The iPod® that is to be connected is not

compatible with the system.

Check the iPod® model and firmware versions

available for the system.

The connected USB extension cable is not

compatible with the system.

Replace the USB extension cable if the system

still does not recognize the iPod® after

reconnecting the cable properly a number of

times.

The cable is rapidly connected to or discon-

nected from the USB connection port.

Slowly connect or disconnect the USB cable.

An iPod® cannot be operated. The iPod® is connected to the in-vehicle audio

system while headsets, etc. are connected to

the iPod®.

Remove all equipment from the iPod® after

disconnecting the iPod® from the system, and

then connect it to the system again.

The iPod® is not operating normally. Disconnect the iPod® from the in-vehicle

audio system, and then connect it to the

system again.

The system plays back an album/file that

includes a particular album art.

Disconnect the iPod® from the in-vehicle

audio system, and then reset the iPod®.

Disable the album art, and then connect the

iPod® to the system.

“iPod® Menu” (page 3-35)

An iPod® does not respond. There are too many files in a category. Decrease the number of files in a category

(less than 65500 files).

The shuffle function is turned on. Turn off the shuffle function if many files are

stored on the iPod®.

Music cannot be played back. A connector is not connected to the iPod®. Firmly connect the connector to the iPod®.

8. Troubleshooting guide

Condition:

8-7

(220,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

8. Troubleshooting guide

Symptom Possible cause Possible solution

Playback cuts out. The sound cuts due to vibration resulting

from an unstable location of the iPod®.

Place the iPod® on a stable location where it

does not roll over.

Battery charge of an iPod® takes longer. Battery charge of the iPod® may take longer

while an iPod® is playing back.

If the iPod® needs to be charged, it is

recommended to stop playing the music.

Battery charge of an iPod® is unavailable. The cable that is connected to the iPod® may

be damaged or improperly connected.

Check the cable currently in use.

Functions cannot be operated using an iPod®

that is connected to the in-vehicle audio

system. -

The operation of an iPod® must be performed

using the in-vehicle audio system after the

iPod® is connected to the system.

Sound skips. Surrounding circumstances (noise, etc.) may

cause the sound to skip.

This does not indicate a malfunction.

A USB extension cable is used. Do not use a USB extension cable.

Condition:

8-8

(221,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

USB MEMORY DEVICE

AIVINJN1-9B58E82E-0419-4E45-A82E-F6C87CFB97F2

Symptom Possible cause Possible solution

The system does not recognize a USB device. A USB extension cable is used. Do not use a USB extension cable.

A USB hub is used. Do not use a USB hub.

A USB device is rapidly connected to or

disconnected from the USB connection port.

Slowly connect or disconnect the USB device.

8. Troubleshooting guide

Condition:

8-9

(222,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

8. Troubleshooting guide

BLUETOOTH® AUDIO

AIVINJN1-31B3F814-D7EA-4A60-B53A-A05CC7472680

Symptom Possible cause Possible solution

Registration cannot be performed. The Bluetooth® audio device is not compa-

tible with the in-vehicle audio system.

Check the Bluetooth® audio device Owner’s

Manual.

Bluetooth® is disabled on device. Check that the Bluetooth® function is enabled

on device.

The PIN code is incorrect. Check the PIN code for the Bluetooth® audio

device that is to be registered.

Check that the PIN code for the Bluetooth®

audio device is consistent with that for the in-

vehicle audio system.

Another Bluetooth® device is used in the

vehicle.

Turn off the other Bluetooth® device until the

registration is completed.

Music cannot be played back. The Bluetooth® audio device is not compa-

tible with the in-vehicle audio system.

Check the Bluetooth® audio device Owner’s

Manual.

The system is not set to the Bluetooth® audio

mode.

Push <AUDIO> and select the Bluetooth®

audio mode.

“Selecting audio source” (page 3-17)

A Bluetooth® adapter is turned off. Turn on a Bluetooth® adapter when it is used

for a Bluetooth® audio device.

Playback stops. The Bluetooth® audio device is not compa-

tible with the in-vehicle audio system.

Visit www.nissanusa.com/bluetooth/ to

check Bluetooth® audio device compatibility.

A cellular call is active. This is not a malfunction.

Sound may cut out when a Bluetooth® audio

device is operated.

Push <AUDIO> and select the Bluetooth®

audio mode, and then operate a function on

the touch screen display of the in-vehicle

system instead of conducting the operation

on the Bluetooth® audio device.

Condition:

8-10

(223,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Symptom Possible cause Possible solution

Audio operation cannot be performed. A Bluetooth® audio device that does not

support audio operations is in use.

Visit www.nissanusa.com/bluetooth/ to

check Bluetooth® audio device compatibility.

An error occurs when connecting to a Blue-

tooth® audio profile.

Turn the power source of the Bluetooth®

audio player off and on, and then resume

connection with the system.

8. Troubleshooting guide

Condition:

8-11

(224,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

8. Troubleshooting guide

BLUETOOTH® HANDS-FREE PHONE SYSTEM

AIVINJN1-BC6BB4C1-95BF-4792-A967-D8DDE888D56D

Symptom Possible cause Possible solution

A cellular phone cannot be registered. The cellular phone is not compatible with the

in-vehicle hands-free phone system.

Use a cellular phone compatible with the system.

Visit www.nissanusa.com/bluetooth/ to check

compatibility.

Registration of the cellular phone has been

performed incorrectly.

Check the registration procedure, and then regis-

ter the cellular phone again.

A cellular phone cannot be connected or

is disconnected after the registration is

completed.

The Bluetooth® setting of the in-vehicle

hands-free phone system is turned off.

Turn on the Bluetooth® setting of the system.

The Bluetooth® setting of the cellular phone

is turned off.

Turn on the Bluetooth® setting of the cellular

phone.

The remaining battery level of the cellular

phone is low.

Charge the battery of the cellular phone.

The wireless Bluetooth® connection may be

disrupted depending on the location of the

cellular phone.

Do not place the cellular phone in an area

surrounded by metal or far away from the in-

vehicle hands-free phone system. Do not place the

cellular phone close to the seats or your body.

Registration of the cellular phone is not

completed.

Perform registration of the cellular phone.

A call to a particular phone number fails. If the system tries to make a call several times

to the same phone number (for example: the

party does not respond to the call, the party is

out of the service area, or the call is aban-

doned before the party responds), the system

may reject a request to make a call to the

phone number.

Turn off the cellular phone and turn it on again to

reset the connection.

Condition:

8-12

(225,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Symptom Possible cause Possible solution

The system does not recognize the

connection of a cellular phone. The

system does not receive or make a call.

The cellular phone is not compatible with the

in-vehicle hands-free phone system.

Use a cellular phone compatible with the system.

Visit www.nissanusa.com/bluetooth/ to check

compatibility.

The cellular phone is not connected. Check the registration procedure, and then regis-

ter the cellular phone again.

The phone operation is limited by the func-

tions (such as dial lock, etc.) of the registered

cellular phone.

Remove any settings that are limiting use of the

cellular phone, and then perform registration

again.

The other party cannot hear your voice.

The other party can hear your voice, but

it cracks or cuts out.

Mute function is enabled. Verify mute function is disabled.

The cellular phone is not connected. Check the registration procedure, and then regis-

ter the cellular phone again.

The fan speed of the heater/air conditioner is

too fast.

Decrease the fan speed of the heater/air condi-

tioner.

The ambient noise level is excessive. (For

example: heavy rain, construction sites, inside

a tunnel, oncoming vehicles, etc.)

Close the windows to shut out ambient noise.

The noise generated by driving the vehicle is

too loud.

Reduce the vehicle speed.

The incoming voice volume is too loud/soft. Adjust the volume using <VOLUME/ >/<VOL/

>or < >.

The outgoing voice volume is too loud/soft. Adjust the volume from volume adjustment

screen.

“Volume and Beeps settings” (page 2-28)

The voice is cut out or noise is heard

during a call.

The wireless Bluetooth® connection may be

disrupted depending on the location of the

cellular phone.

Do not place the cellular phone in an area

surrounded by metal or far away from the in-

vehicle hands-free phone system. Do not place a

cellular phone close to the seats or your body.

8. Troubleshooting guide

Condition:

8-13

(226,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

8. Troubleshooting guide

Symptom Possible cause Possible solution

When a cellular phone is operated to

make a call, the hands-free function

becomes unavailable.

Some models of a cellular phone do not

switch to the hands-free mode when they are

operated to make a call.

This is not a malfunction. Make another call using

the hands-free function.

The other party’s voice cannot be heard.

There is no ringtone.

The volume level is set to the minimum. Adjust the volume level.

“Volume and Beeps settings” (page 2-28)

A cellular phone is not connected. Check the registration procedure, and then regis-

ter the cellular phone again.

Each volume level (ringtone, incoming

voice or outgoing voice) is different.

Each volume level is not adjusted properly. Adjust each volume level properly.

The antenna display is different between

the touch screen display and a cellular

phone screen. Making or receiving a call

is unavailable even though the antenna

display shows that it is possible to do so.

The antenna display varies depending on the

model of cellular phone.

This does not indicate a malfunction. The antenna

display and remaining battery level shown on the

touch screen display may be different from those

shown on the cellular phone screen. Use them as a

reference.

A voice cannot be heard clearly when

using a cellular phone behind tall build-

ings.

Some structures such as tall buildings, etc.

may cause irregular reflection of radio waves

or completely shut out radio waves that are

used for cellular phones.

Move to a place without tall buildings.

Noise is heard when using a cellular

phone under/near areas of elevated

railroads, high voltage electric power

cables, traffic signals, neon billboards,

etc.

Electromagnetic waves that are generated

from radio devices may adversely affect the

cellular phone.

This is not a malfunction.

Noise is heard in the sound from the

audio system while using a cellular

phone.

Radio waves that are generated from a

cellular phone may adversely affect the

sound from the audio system.

This is not a malfunction.

Sound skips or stutters. The cellular phone may have turned on the

wireless LAN (Wi-Fi).

Turn off the wireless LAN (Wi-Fi).

Condition:

8-14

(227,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Symptom Possible cause Possible solution

Phonebook cannot be downloaded. An error occurred during the phone pairing

process.

Please delete the Bluetooth® pairing information

from both the cellular phone and vehicle system

before registering it again.

Phone does not support phonebook down-

load function.

Visit www.nissanusa.com/bluetooth/ to check

compatibility.

8. Troubleshooting guide

Condition:

8-15

(228,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

8. Troubleshooting guide

NISSANCONNECT® SERVICES (if

so equipped)

AIVINJN1-C77D3493-DF41-4650-B88C-9DC569176B1D

Symptom Possible cause Possible solution

The system cannot con-

nect to the NissanCon-

nect® Services Data Center.

A subscription for the NissanCon-

nect® Services has not been estab-

lished.

about subscriptions, contact the NissanConnect® Services support line.

“NissanConnect® Services features” (page 5-7)

The communication line is busy. Try again after a short period of time.

The vehicle is in a location where it is

difficult to receive radio waves.

When the vehicle moves to an area where radio waves can be

transmitted sufficiently, communication will be restored. When the icon

on the display shows that the vehicle is inside the communication area,

the system can be used.

TCU (Telematics Control Unit) is not

turned on.

If the icon does not show that the vehicle is inside the communication

area despite the fact that the vehicle is in that location, contact the

NissanConnect® Services support line.

“NissanConnect® Services features” (page 5-7)

Radio wave reception is not sufficient

for TCU (Telematics Control Unit)

operation.

When the vehicle moves to an area where radio waves can be

transmitted sufficiently, communication will be restored. When the icon

on the display shows that the vehicle is inside the communication area,

the system can be used.

Some of the items that are

displayed on the menu

screen cannot be selected.

The vehicle is being driven and some

menu items are disabled.

Stop the vehicle in a safe location and apply the parking brake before

operating the menu screen items.

Some parts of the screen

are not displayed.

The vehicle is being driven and some

menu items are disabled.

Operate the system after stopping the vehicle in a safe location and

applying the parking brake.

The system does not an-

nounce information.

The volume level is set to the mini-

mum.

Adjust the volume level by operating <VOLUME/ >/<VOL/ > on the

control panel or <>on the steering wheel switch while the system is

announcing information.

Condition:

8-16

(229,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Apple CarPlay

AIVINJN1-921676AA-D7C1-4E97-9EC4-367674E9315B

Symptom Cause and Countermeasure

Cannot start Apple CarPlay

though it is tethered to the

vehicle.

The USB cable is not connected to the USB connection port. Properly connect the

USB cable to the USB connection port.

“USB (Universal Serial Bus) connection port and AUX (auxiliary) input jack”

(page 2-14)

Use an Apple Lightning

cable (Mfi certified) to connect your phone to the USB

connection port and check the cable that is not broken.

Apple CarPlay

setting is not active on your iPhone®. Turn on “CarPlay” on your

iPhone®.

The device is not compatible with Apple CarPlay

. Check the compatibility

requirements.

Apple CarPlay

performance decreases. For example,

slow connectivity or slow application functionality.

An error message appears when trying to access

features of Apple CarPlay

. A blank screen appears

when trying to access maps.

Confirm you have a compatible iPhone®, a cellular connection and an active data

plan.

Use an Apple Lightning

cable (Mfi certified) to connect your phone to the USB

connection port.

Phone’s performance or cellular connection. Disconnect and reconnect your

phone.

Phone’s performance or cellular connection. Cycle phone power off/on to restart.

Cannot access Siri® using <>on the steering wheel. The USB cable may not be properly connected. Disconnect and reconnect the USB

cable.

Siri® setting is not enabled on the phone. Turn on “Siri” on your phone.

Check that you are pushing and holding <>instead of just pushing the switch

to initiate Siri® operation.

8. Troubleshooting guide

Condition:

8-17

(230,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

8. Troubleshooting guide

Android Auto

GUID-6A75FEAF-7FAF-487C-9FFB-E2C40B65CC39

Symptom Cause and Countermeasure

Cannot start Android Auto

though it is connected to

the vehicle.

The USB cable is not connected to the USB connection port. Properly connect the

USB cable to the USB connection port.

“USB (Universal Serial Bus) connection port and AUX (auxiliary) input jack”

(page 2-14)

[Enable after USB Connection] is set to [Never]. Change the setting to [Always] or

[Ask].

“Android Auto

settings” (page 5-25)

To activate Android Auto

, touch [ ] on the Launch Bar or touch [Apps] on the

information screen and then touch [Android Auto].

“Selecting menu from Launch Bar” (page 2-16)

“Information menu” (page 5-2)

The connected device is not compatible with Android Auto

. Check the

compatibility requirements.

Your Android phone may not be recognized if its battery is low. Charge your

Android phone then try again.

Android Auto

performance decreases. For example,

slow connectivity or slow application functionality.

An error message appears when trying to access

features of Android Auto

. A blank screen appears

when trying to access maps.

Confirm you have a compatible Android phone, a cellular connection and an active

data plan.

Use the Android phone OEM cable to connect your phone to the USB connection

port.

Phone’s performance or cellular connection. Disconnect and reconnect your

phone.

Phone’s performance or cellular connection. Close all apps and restart them.

Phone’s performance or cellular connection. Cycle phone power off/on to restart.

Condition:

8-18

(231,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Cannot start voice operation using < > on the

steering wheel.

The USB cable may not be properly connected. Disconnect and reconnect the USB

cable.

Voice operation can not be performed while driving. Turn on the "While driving"

setting on your Android phone.

Check that you are pushing and holding <>instead of just pushing the switch

to voice operation.

8. Troubleshooting guide

Condition:

8-19

(232,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

8. Troubleshooting guide

SIRI® EYES FREE

GUID-C0A3173E-939B-470C-AAED-0CAF1B795D9E

Symptom Cause and Countermeasure

Cannot access Siri® Eyes Free using

<>on the steering wheel.

Check if a Bluetooth® connection is established between the iPhone® and the system.

Check if Siri® is enabled on the device. On your phone, go to Siri® setting.

Check that Siri® can be accessed from the device lock screen. This can be set in the settings menu

of your phone.

Audio source does not change auto-

matically to iPod® or Bluetooth® Audio

mode.

For best results, use the native music app. Performance of music control function while using

Podcasts, Audiobook or other third party music apps may vary.

For best results, play media already stored on your device. Streaming music or playback from cloud

storage may degrade performance.

Switch the source manually by pushing <AUDIO>.

Play, pause, next track, previous track or

play timer does not work.

For best results, use the native music app. Performance of music control function while using

Podcasts, Audiobook or other third party music apps may vary and is controlled by the device.

Cannot hear any music/audio being

played back from a connected iPhone®.

Check that the audio source is set to Bluetooth® Audio or iPod® mode. A USB connection is

required for iPod® mode.

Cannot hear map turn-by-turn direction

guidance from a connected iPhone®.

Check that the audio source is set to Bluetooth® Audio or iPod® mode. A USB connection is

required for iPod® mode.

Cannot receive text message notifica-

tions on the vehicle audio system.

Check if “Show Notifications” is enabled on your phone. On your phone, go to Bluetooth® settings.

Find the device name, like “MY CAR”. Touch the icon on your phone. Turn on “Show

Notifications”.

Cannot reply to text message notifica-

tions using Siri® Eyes Free.

After receiving an incoming text message, follow the on-screen guidance. Push and hold <>on

the steering wheel for Siri® Eyes Free. After Siri® Eyes Free starts, say “Text Message”.

Condition:

8-20

(233,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

NAVIGATION (if so equipped)

AIVINJN1-9CDB1CD7-F25C-4AF6-97FF-6E29E3C9EB64

BASIC OPERATIONS

AIVINJN1-63D868E1-81BC-4C67-BECA-983902BED4C1

Symptom Possible cause Possible solution

No image is displayed. The brightness is at the lowest setting. Adjust the brightness of the display.

“Display settings” (page 2-31)

The display is turned off. Push <>to turn on the display.

The volume of the voice guidance is too high

or too low.

The volume is not set correctly, or the voice

guidance setting is turned off.

Adjust the volume of the voice guidance or

turn on the voice guidance setting.

“Volume and Beeps settings” (page 2-28)

No map is displayed on the screen. A screen other than a map screen is dis-

played.

Touch [Map] on the Launch Bar or push

<MAP>.

The screen is too dim. The movement is slow. The temperature in the interior of the vehicle

is low.

Wait until the interior of the vehicle has

warmed up.

Some pixels in the display are darker or

brighter than others.

This condition is an inherent characteristic of

liquid crystal displays.

This is not a malfunction.

Some menu items cannot be selected. Some menu items become unavailable while

the vehicle is driven.

Park the vehicle in a safe location, and then

operate the navigation system.

8. Troubleshooting guide

Condition:

8-21

(234,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

8. Troubleshooting guide

VEHICLE ICON

AIVINJN1-C0C1C898-A889-456C-A1BE-60ABF2162EC7

Symptom Possible cause Possible solution

Names of roads and locations differ

between 2D and 3D view.

This is because the quantity of the displayed informa-

tion is reduced so that the screen does not become too

cluttered. There is also a chance that names of the

roads or locations may be displayed multiple times, and

the names appearing on the screen may be different

because of a processing procedure.

This is not a malfunction.

The location of the vehicle icon is

misaligned from the actual position.

The vehicle was transported after the ignition switch

was placed in the OFF position, for example, by a ferry or

car transporter.

Drive the vehicle for a period of time on a

road where GPS signals can be received.

The position and direction of the vehicle icon may be

incorrect depending on the driving environments and

the levels of positioning accuracy of the navigation

system.

This is not a malfunction. Drive the vehicle

for a period of time to automatically

correct the position and direction of the

vehicle icon.

“Current vehicle location” (page 6-59)

Driving with tire chains or tires that have been replaced

may result in an incorrect vehicle location display due to

miscalculation by the speed sensor.

Drive the vehicle for a period of time (at

approximately 19 MPH (30 km/h) for about

30 minutes) to automatically correct the

vehicle icon position.

If this does not correct the vehicle icon

position, it is recommended you contact a

NISSAN dealer.

The map data has a mistake or is incomplete (the

vehicle icon position is always misaligned in the same

area).

Updated road information will be included

in the next version of the map data.

“How to update map data” (page 6-65)

When the vehicle is traveling on a new

road, the vehicle icon is located on

another road nearby.

Because the new road is not stored in the map data, the

system automatically places the vehicle icon on the

nearest road available.

Updated road information will be included

in the next version of the map data.

“How to update map data” (page 6-65)

Condition:

8-22

(235,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Symptom Possible cause Possible solution

The screen does not switch to the

night screen even after turning on the

headlights.

The daytime screen was set the last time the headlights

were turned on.

Set the screen to the night screen mode

using <>when turning on the head-

lights.

“Display settings” (page 2-31)

The map does not scroll even when

the vehicle is moving.

The current location map screen is not displayed. Touch [Map] on the Launch Bar or push

<MAP>.

The vehicle icon is not displayed. The current location map screen is not displayed. Touch [Map] on the Launch Bar or push

<MAP>.

8. Troubleshooting guide

Condition:

8-23

(236,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

8. Troubleshooting guide

ROUTE CALCULATION AND VISUAL GUIDANCE

AIVINJN1-1302203A-3BB3-4E27-A68F-EB2EC58942E3

Symptom Possible cause Possible solution

Waypoints are not included in

the auto reroute calculation.

Waypoints that have been already passed are not included

in the auto reroute calculation.

To go to that waypoint again, edit the route.

Route information is not dis-

played.

Route calculation has not yet been performed. Set the destination and perform route calcu-

lation.

The vehicle is not on the suggested route. Drive on the suggested route.

Route guidance is turned off. Turn on route guidance.

Route information is not provided for certain types of

roads.

This is not a malfunction.

The auto reroute calculation (or

detour calculation) suggests the

same route as the one pre-

viously suggested.

Route calculations took priority conditions into consid-

eration, but the same route was calculated.

This is not a malfunction.

A waypoint cannot be added. Twenty waypoints are already set on the route, including

ones that the vehicle has already passed.

A maximum of 20 waypoints can be set on the

route. To go to 21 or more waypoints, perform

route calculations multiple times as neces-

sary.

The suggested route is not dis-

played.

Roads near the destination cannot be calculated. Reset the destination to a main or ordinary

road, and recalculate the route.

The starting point and destination are too close. Set a more distant destination.

The starting point and destination are too far away. Divide the trip by selecting one or two

intermediate destinations, and perform route

calculations multiple times.

There are time restricted roads (by the day of the week, by

time) near the current vehicle location or destination.

Select [Do Not Use Restriction Info] in the

[Time Restricted Roads] setting.

“Route Preference” (page 6-38)

A part of the route is not dis-

played.

The suggested route includes narrow streets. This is not a malfunction.

Condition:

8-24

(237,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Symptom Possible cause Possible solution

The part of the route that the

vehicle has already passed is

deleted.

A route is managed by sections between waypoints. If the

vehicle passed the first waypoint, the section between the

starting point and the waypoint is deleted (it may not be

deleted depending on the area).

This is not a malfunction.

An indirect route is suggested. If there are restrictions (such as one-way streets) on roads

close to the starting point or destination, the system may

suggest an indirect route.

Adjust the location of the starting point or

destination.

The system may suggest an indirect route because route

calculation does not take into consideration some areas

such as narrow streets.

Reset the destination to a main or ordinary

road, and recalculate the route.

The landmark information does

not correspond to the actual

information.

This may be caused by insufficient or incorrect map data. Updated information will be included in the

next version of the map data.

“How to update map data” (page 6-65)

The suggested route does not

exactly connect to the starting

point, waypoints or destination.

There is no data for route calculation closer to these

locations.

Set the starting point, waypoints and desti-

nation on a main road, and perform route

calculation.

8. Troubleshooting guide

Condition:

8-25

(238,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

8. Troubleshooting guide

VOICE GUIDANCE

AIVINJN1-A3BC94B6-484D-4996-8E51-9B1AA5530FE5

Symptom Possible cause Possible solution

Voice guidance is not available. The vehicle has deviated from the suggested route. Go back to the suggested route or

request route calculation again.

Voice guidance is turned off. Turn on voice guidance.

Route guidance is turned off. Turn on route guidance.

The guidance content does not

correspond to the actual road con-

ditions.

The content of voice guidance may vary, depending on the

types of intersections at which turns are made.

Follow all traffic rules and regulations.

Condition:

8-26

(239,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

TRAFFIC INFORMATION

AIVINJN1-10AAF583-945C-4754-BF28-86265643DEC5

Symptom Possible cause Possible solution

Traffic information is not displayed. Traffic information is not turned on. Turn on the traffic information.

The vehicle is in an area where traffic information

is not available.

Scroll to an area where traffic information is

available.

The subscription to SiriusXM Traffic

is incom-

plete, or the subscription to SiriusXM Traffic

has

expired.

Check the subscription status of SiriusXM Traffic

“Notes on SiriusXM Traffic

information”

(page 6-45)

The map scale is set at a level where the display of

icons is impossible.

Check that the map scale is set at a level in which

the display of icons is possible.

“Traffic information on map” (page 6-48)

With the automatic detour route

turned on, no detour route is set to

avoid congested areas.

There is no faster route compared to the current

route, based on the road network and the traffic

information.

The automatic detour search is not intended for

avoiding traffic jams. It searches for the fastest

route taking conditions such as traffic jams into

consideration. Follow the current route.

“Notes on SiriusXM Traffic

information”

(page 6-45)

The route does not avoid a road

section with traffic information

stating that it is closed due to road

construction.

The navigation system is designed not to avoid

this event because the actual period of closure

may differ from the declared roadwork period.

Observe the actual road conditions and follow the

instructions on the road for a detour when

necessary. If the road is closed, use the detour

function and set the detour distance to avoid the

road section that is closed.

8. Troubleshooting guide

Condition:

8-27

(240,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

8. Troubleshooting guide

VOICE RECOGNITION

AIVINJN1-A8BC0EA8-7703-45A1-ACE6-B63B09F42786

Symptom Possible cause Possible solution

The system does not operate or fails to

interpret the command correctly.

The interior of the vehicle is too noisy. Close the windows or have the other occu-

pants be quiet.

The fan speed of the heater/air conditioner is

too fast.

Decrease the fan speed of the heater/air

conditioner.

The noise generated by driving the vehicle is

too loud.

Reduce the vehicle speed.

The voice command is spoken in a low voice. Speak the command in a louder voice.

The timing of speaking a command is too

early.

Speak the command after confirming the

following: a voice guidance is announced, a

tone sounds, and an icon on the screen

changes from gray to orange.

The command is spoken too slowly. Speak in a natural voice without pausing

between words.

The system prompts to repeat a command. Pronunciation is unclear. Speak clearly.

The command is spoken too late after the

tone.

Speak the command within 5 seconds after

confirming the following: a voice guidance is

announced, a tone sounds, and an icon on

the screen changes from gray to orange.

An improper command is spoken. Speak the command or a number that is

displayed on the screen.

Speak a command that is shown in the

command list.

The system does not correctly recognize a

number spoken.

Too many numbers are spoken at once. Place a pause between the appropriate digits

for correct recognition by the system. When

speaking a telephone number, place a pause

between area codes, dial codes, etc.

Condition:

8-28

(241,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

Symptom Possible cause Possible solution

USB memory device cannot be operated with

voice commands.

Depending on the device, iPhone® or iPod®

may be recognized as a USB memory device.

This is not malfunction

The USB/iPod® operation screen is grayed

out.

The audio device is not connected. Connect an audio device to the system.

An error message is displayed when trying to

select a track and operate USB/iPod®.

The track information is being processed for

registration by the system.

Song information will be loaded into the

system when a new audio device is registered

for the first time or when the song informa-

tion in the pre-registered device has been

changed. Please wait for the loading to

complete which may take a few minutes to up

to an hour.

A number of songs exceeding the amount the

device can contain are stored in the con-

nected audio device.

Decrease the number of songs stored in the

audio device.

No song is stored in the audio device. Store songs in the connected audio device.

Storing songs with information such as artist

name, album name, song name, playlist, etc.,

will make voice recognition song search

available.

The system does not correctly recognize a

Point of Interest (POI) name spoken.

There are some rare cases where a POI

search is unavailable by speaking the facility

name but the location can be found on the

map.

This is not a malfunction. Consider using an

alternate search method, like street address.

Partial or alias name is spoken. For best results, speak the full name.

8. Troubleshooting guide

Condition:

8-29

(242,1)

[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]

8. Troubleshooting guide

MEMO

Condition:

8-30

(243,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
Index
Number
2D map ......................................................................... 6-5
Number
3D map ......................................................................... 6-6
A
About route guidance .................................... 6-31
Adjusting settings .............................................. 2-19
Android Auto
TM
.................................................... 5-23
Apple CarPlay
TM
.................................................. 5-21
Audio
main buttons ........... 3-10, 3-11, 3-12, 3-13,
3-14
Audio operation precautions ...................... 3-2
Audio operations ................................................ 3-17
AUX (auxiliary) input jack .............................. 2-14
Auxiliary (AUX) devices ................................... 3-38
B
Bluetooth® audio .................................... 3-9, 3-35
Bluetooth® Hands-Free
Phone System .......................................................... 4-2
Building graphics .................................................. 6-7
C
Canceling route ................................................... 6-37
CD/USB memory device care
and cleaning .......................................................... 3-41
Changing map ........................................................ 6-9
Changing order of destination
and waypoints ...................................................... 6-43
Changing scale of map .................................... 6-8
Clock settings ....................................................... 2-29
Command list .......................................................... 7-6
Compact Disc (CD) player ................ 3-4, 3-25
Compressed Audio
Files (MP3/WMA/AAC) ....................................... 3-5
Connecting Bluetooth®
Hands-Free Phone ............................................... 4-4
Connecting to Interactive
Voice Menu ............................................................. 5-12
Connectings settings ...................................... 2-26
Control buttons and touch
screen display .......................................................... 2-2
Control panel .............. 2-2, 2-4, 2-5, 2-6, 2-7
Current location map screen ................... 6-14
Current vehicle location ............................... 6-59
D
Deleting stored item ........................................ 6-55
Destination setting menu ........................... 6-15
Displaying navigation screen ...................... 6-3
Displaying urgent
traffic information ............................................. 6-47
During a call .............................................................. 4-6
E
Editing route .......................................................... 6-41
Editing stored information ......................... 6-52
Emergency support ......................................... 5-14
F
Finding address ................................................... 6-19
Finding points of interest ............................ 6-20
Functions disabled while driving ........... 2-22
G
Giving voice commands .................................. 7-2
H
Hands-free text
messaging assistant .......................................... 4-7
How to see voice command screen ....... 7-3
I
Information menu ................................................ 5-2
Index
Condition:
9-1

(244,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
Index
iPod® player ............................................................ 3-32
L
Laser product .......................................................... 1-4
Launch Bar .............................................................. 2-16
Legal disclaimer ..................................................... 1-6
Licenses ........................................................................ 1-7
Liquid crystal display .......................................... 2-8
M
Making a call ............................................................. 4-5
Map Menu screen .............................................. 6-14
Map types ................................................................... 6-5
Map view settings .............................................. 6-10
Moving map .............................................................. 6-7
N
Navigation screen ................................................. 6-3
Navigation settings .......................................... 6-57
NissanConnect® Services ............................... 5-6
NissanConnect® Services settings ....... 5-17
Notes on SiriusXM
Traffic™ information ........................................ 6-45
Number input screen ...................................... 2-20
O
One Shot Call ........................................................... 7-3
Online Search ........................................................ 6-19
Options before starting the
route guidance .................................................... 6-29
P
Phone ............................................................................. 4-4
Phone operation ............................................... 5-25
Phone selection ...................................................... 4-4
Phone settings ..................................................... 4-10
Q
Quick Dial ................................................................. 4-13
R
Radio ................................................................ 3-2, 3-19
Recalculating route .......................................... 6-41
Receiving a call ....................................................... 4-5
Route calculation ............................................... 6-64
Route guidance .................................... 6-31, 6-62
Route menu ............................................................ 6-34
S
Safety information .................................... 1-3, 6-3
Scrolled location map screen ................... 6-14
Searching from address book ................. 6-22
Searching from
previous destinations ..................................... 6-22
Setting by phone number ........................... 6-26
Setting city center ............................................. 6-23
Setting detour route ....................................... 6-37
Setting from stored routes ........................ 6-26
Setting home as destination .................... 6-19
Setting information on map ..................... 6-13
Setting intersection .......................................... 6-25
Setting point on map ..................................... 6-28
Setting with
NissanConnect® Services ............................ 6-23
Setting work location
as destination ....................................................... 6-19
Settings menu ...................................................... 2-24
Siri® Eyes Free ....................................................... 5-26
Siri® operation ...................................................... 5-22
SiriusXM® Travel Link ...................................... 5-18
Specifying region ............................................... 6-18
Split screen ................................................................ 6-9
Starting system ................................................... 2-16
Start-up screen ................................................... 2-16
Steering wheel controls
for audio ....... 3-14, 3-15, 3-15, 3-15, 3-16,
Condition:
9-2

(245,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
3-16
Steering
wheel switches .......... 2-9, 2-10, 2-11, 2-12,
2-13, 2-14
Storing a location/route .............................. 6-49
Storing avoid area ............................................. 6-51
Storing home location ................................... 6-49
Storing location ................................................... 6-49
Storing route ......................................................... 6-50
Subscription to
NissanConnect® Services ............................... 5-6
System settings ................................................... 2-23
System voice settings .................................... 7-13
T
Text message settings .................................. 4-10
Touch panel operation .................................. 2-17
Trademarks ............................................................... 1-4
Traffic information on map ....................... 6-48
Traffic information setting ......................... 6-49
Turn list ...................................................................... 6-33
U
USB (Universal Serial Bus)
connection port ...................................... 2-14, 3-5
USB memory device player ........................ 3-28
Using Destination Send to Car ................ 6-24
Using Journey Planner ................................... 6-24
V
Viewing SiriusXM® Travel Link .................. 5-18
Viewing traffic events from list ............... 6-47
Viewing traffic information ........................ 6-45
Voice Prompt Interrupt .................................... 7-3
Voice recognition .................................................. 7-2
Volume settings .................................................. 2-28
Index
Condition:
9-3