Rocket Fish Rf Tvmfm03 Owner S Manual TVMFM03V2_13 0601_MAN_V3_ENG

: Rocket-Fish Rocket-Fish-Rf-Tvmfm03-Owner-S-Manual rocket-fish-rf-tvmfm03-owner-s-manual rocket-fish pdf

Open the PDF directly: View PDF .
Page Count: 19

RF-TVMFM03V2

TV Wall Mount

Assembly Guide

Safety information and specifications .................................2

Tools needed.................................................................................3

Package contents: parts............................................................4

Package contents: hardware ...................................................5

Assembly instructions................................................................6

For wood-stud

installation only

Before using your new product, please read these instructions to prevent any damage.

RF-TVMFM03V2_13-0601_MAN_V3_ENG - GIF.fm Page 1 Tuesday, July 9, 2013 10:25 AM

2Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)

RF-TVMFM03V2 TV Wall Mount

Safety information and specifications

IMPORTANT SAFETY INSTRUCTIONS -

SAVE THESE INSTRUCTIONS

CAUTION: Do not use this product for

any purpose not explicitly specified by

Rocketfish.

Improper installation may cause

property damage or personal injury. If

you do not understand these directions, or have doubts

about the safety of the installation, contact Customer

Service or call a qualified contractor. Rocketfish is not

responsible for damage or injury caused by incorrect

installation or use.

The weight of your TV must not exceed 130 lbs. (58.9 kg).

The wall must be capable of supporting five times the

weight of your TV and wall mount combined.

This product contains small items that could be a choking

hazard if swallowed. Keep these items away from young children!

Maximum TV weight: 130 lbs. (58.9 kg)

Screen size: 40" to 60" diagonal

Overall dimensions (H × W × D):

19.5 × 29.5 × 3 in. (50 × 75 × 7.6 cm)

Wall-mount weight: 17 lbs. (7.7 kg)

We’re here for you

www.rocketfishproducts.com

For customer service, call:

1-800-620-2790 (U.S. and Canada) or

01-800-926-3010 (Mexico)

19.5" (50 cm)

29.5" (75 cm)

RF-TVMFM03V2_13-0601_MAN_V3_ENG - GIF.fm Page 2 Tuesday, July 9, 2013 10:25 AM

3

Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)

RF-TVMFM03V2 TV Wall Mount

Tools needed

You will need the following tools to assemble your new TV wall mount:

Edge-to-edge

stud finder

Pencil Level

Phillips screwdriver Socket wrench with

1/2" (13 mm) socket or

adjustable wrench

Measuring tape

Drill

7/32" (5.5 mm) wood

drill bit for wood stud

wall

Tape

RF-TVMFM03V2_13-0601_MAN_V3_ENG - GIF.fm Page 3 Tuesday, July 9, 2013 10:25 AM

4Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)

RF-TVMFM03V2 TV Wall Mount

Parts

Package contents: parts

Make sure that you have all the parts necessary to assemble your new TV wall mount:

Hardware

A Right vertical TV

bracket (1)

B Left vertical TV

bracket (1)

C Horizontal TV bracket (2)

D Arm assembly (1) E Wall plate (1)

F Template (1)

G Cable cover (1)

RF-TVMFM03V2_13-0601_MAN_V3_ENG - GIF.fm Page 4 Tuesday, July 9, 2013 10:25 AM

5

Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)

RF-TVMFM03V2 TV Wall Mount

Package contents: hardware

Make sure that you have all the hardware necessary to assemble your new TV wall mount:

TV Hardware Bag

Label Hardware Qty.

H4

I4

J4

K4

L4

M4

N4

O4

P4

Q4

R4

M4 × 12 mm

screw

M4 × 35 mm

screw

M4/M5 washer

M6/M8 washers

Universal spacers

M5 × 12 mm

screw

M5 × 35 mm

screw

M6 × 12 mm

screw

M6 × 35 mm

screw

M8 × 16 mm

screw

M8 × 20 mm screw

Label Hardware Qty.

S4

T4

U4

V4

W1

X5

Y1

Z1

Zz 2

M8 × 35 mm screw

Lag bolt washer

5/16" × 2 3/4" lag bolt

8-32 x 9/16"

Phillips head

screw

8-32 x 3/8"

Phillips head screw

Cable ties (8"/20.5 cm nylon)

5/32" hex key

3/16" hex key

Cap screw

RF-TVMFM03V2_13-0601_MAN_V3_ENG - GIF.fm Page 5 Tuesday, July 9, 2013 10:25 AM

6Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)

RF-TVMFM03V2 TV Wall Mount

Assembly instructions

Step 1 Determine whether your TV has a flat back or an irregular or obstructed

back

1Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages

and scratches.

2If your TV has a table-top stand attached, remove the stand. See the documentation that came with your TV

for instructions.

3Temporarily lay the vertical mounting TV brackets (A and B) on the back of your TV.

4Temporarily slide the horizontal brackets (C) through the vertical brackets (A and B).

5Align the screw holes in the brackets with the mounting screw holes on your TV.

6Position the brackets so they do not extend above or below your TV and do not cover any connectors or

jacks. Make note of which bracket screw holes you will use.

• If the brackets lay flush against the back of your TV and do not block any jacks, your TV has a flat back

and you do not need spacers.

• If a bracket blocks any jacks, your TV has an obstructed back. In that case, you need spacers.

• If there is a gap between a bracket and some part of the back of your TV, your TV has an

irregularly-shaped back. In that case, you need spacers.

7Remove the brackets, then separate the horizontal brackets from the vertical brackets.

Flat back (no spacers needed)

Obstructed back (spacers needed)

Irregular back (spacers needed)

RF-TVMFM03V2_13-0601_MAN_V3_ENG - GIF.fm Page 6 Tuesday, July 9, 2013 10:25 AM

7

Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)

RF-TVMFM03V2 TV Wall Mount

Step 2 Select screws, washers, and spacers

1Select the hardware for your TV (screws, washers, and spacers). A limited number of TVs come with

mounting hardware included. (If there are screws that came with the TV, they are almost always in the holes

on the back of the TV.) If you don't know the correct length and diameter of the mounting screws your TV

requires, test various sizes by hand threading the screws.

Select one of the following types of screws:

Select one of the following types of washers:

For an irregular or obstructed TV back, use the following spacers:

CAUTION: To avoid potential personal injuries and property damage, make sure that there are

adequate threads to secure the brackets to your TV. If you encounter resistance, stop immediately and

contact customer service. Use the shortest screw and spacer combination to accommodate your TV.

Using hardware that is too long may damage your TV. However, using a screw that is too short may

cause your TV to fall from the mount.

2Remove the screws.

3For a flat back TV, go to “Step 3 - Option 1: Attaching the mounting hardware to TVs with a flat back” on

page 8.

-OR-

For an irregular or obstructed back, go to “Step 3 - Option 2: Attaching the hardware to TVs with an irregular

or obstructed back” on page 9.

M4 × 12 mm screws (H)M6×12mm screws (O)

M4 × 35 mm screws (I)M6×35mm screws (P)

M5 × 12 mm screws (M)M8×16mm screws (Q)

M5 × 35 mm screws (N)M8×20mm screws (R)

M8 × 35 mm screws (S)

M4/M5 washers (J) M6/M8 washers (K)

Universal spacers (L)

Screw is

too long

Screw fits

correctly

Screw is

too short

RF-TVMFM03V2_13-0601_MAN_V3_ENG - GIF.fm Page 7 Tuesday, July 9, 2013 10:25 AM

8Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)

RF-TVMFM03V2 TV Wall Mount

Step 3 - Option 1: Attaching the mounting hardware to TVs with a flat back

1Center the brackets vertically on the back of your TV, then align the holes you noted on the right vertical TV

bracket (A) and left vertical TV bracket (B) with the screw holes on the back of your TV. The brackets are

marked “R” for the right bracket and “L” for the left bracket.

2Place the M4/M5 washers (J) or M6/M8 washers (K) over the holes in the TV brackets that align with the

screw holes on the back of your TV, then insert the M4 screws (H), M5 screw (M), M6 screws (O), or M8 screws

(Q or R) through the washers. Make sure that the brackets are level.

3Tighten the screws until they are snug against the TV bracket. Do not over tighten.

You’ll need

J (4) K (4)

H (4) M (4) O (4)

Phillips screwdriver

OROR OR

Screws

OR

Q (4)

Washers

Level Vertical brackets

(A and B)

R (4)

OR

RF-TVMFM03V2_13-0601_MAN_V3_ENG - GIF.fm Page 8 Tuesday, July 9, 2013 10:25 AM

9

Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)

RF-TVMFM03V2 TV Wall Mount

Step 3 - Option 2: Attaching the hardware to TVs with an irregular or obstructed

back

1Place the spacers (L) into the screw holes on the back of your TV.

2Align the holes you noted on the right vertical TV bracket (A) and left vertical TV bracket (B) with the spacers

and washers on the back of your TV. The brackets are marked “R” for the right bracket and “L” for the left

bracket.

3Place the M4/M5 washers (J) or M6/M8 washers (K) over the holes in the TV brackets that align with the

screw holes on the back of your TV, then insert the M4 screws (I), M5 screws (N), M6 screws (P), or M8 screws

(S) through the washers. Make sure that the brackets are level.

4Tighten the screws until they are snug against the TV bracket. Do not over tighten.

You’ll need

J (4) K (4)

I (4) N (4) P (4)

Phillips screwdriver

OR

OR

OR

Screws Washers

Spacers

L (4)

S (4)

OR

Level

Vertical brackets

(A and B)

RF-TVMFM03V2_13-0601_MAN_V3_ENG - GIF.fm Page 9 Tuesday, July 9, 2013 10:25 AM

10 Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)

RF-TVMFM03V2 TV Wall Mount

Step 4 Install the horizontal TV brackets

1Slide the horizontal brackets (C) through the metal guides on the vertical TV brackets until they are centered.

2Secure the horizontal TV brackets to the vertical TV brackets using the 8-32 x 9/16" Phillips head screws (V).

Tighten the screws until they are snug, but do not over tighten.

Note: Make sure that the brackets are not covering any jacks or connectors.

You’l l need

V (4) Phillips screwdriver

Horizontal brackets (C)

RF-TVMFM03V2_13-0601_MAN_V3_ENG - GIF.fm Page 10 Tuesday, July 9, 2013 10:25 AM

11

Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)

RF-TVMFM03V2 TV Wall Mount

Step 5 Determine wall-mount location

Note:

• For more detailed information on determining where to drill your holes, visit our online height-finder at:

http://mf1.bestbuy.selectionassistant.com/index.php/heightfinder

• Your TV should be high enough so your eyes are level with the middle of the screen. Normally, 40 to 60 inches

from the ground.

The center of your TV will match the center of the wall plate (E). Before you drill holes in the wall:

1Measure the distance from the bottom of your TV to the middle (half of the height of the TV). This is

measurement a.

2Measure the distance from the floor to where you want the bottom of the TV to be placed on the wall. Keep

in mind that the bottom of the TV should be placed above any furniture (such as entertainment centers or

TV stands). The TV should also be above items placed on top of the furniture (like a Blu-ray player or cable

box). This measurement is b.

3Add a + b. The total measurement is the height where you want the center of the arm assembly to be on the

wall.

4Use a pencil to mark this spot on the wall.

You’l l need

a

b

Measuring tape Pencil

RF-TVMFM03V2_13-0601_MAN_V3_ENG - GIF.fm Page 11 Tuesday, July 9, 2013 10:25 AM

12 Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)

RF-TVMFM03V2 TV Wall Mount

Step 6 Install the wall plate to a wood stud wall

Note: Drywall covering the wall must not exceed 5/8" (16 mm).

1Locate the studs. Verify the centers of the studs with an edge-to-edge stud finder and mark the centers.

2Vertically center the wall plate template (F) at the wall height you determined in the previous step, then

align the wall plate template (F) against the wall and make sure that it is level. Tape the wall plate template

(F) to the wall, then use a pencil to mark the lag bolt hole locations (4) on the stud centers. Remove the wall

plate template (F).

Note: Your TV shifts left or right 7" (17.8 cm) from the home position to full extension.

3Drill pilot holes to a depth of 3" using a 7/32" diameter drill bit.

4Align the wall plate (E) with the pilot holes, then place the lag bolt washers (T) over the holes in the wall

plate (E). Insert the lag bolts (U) through the washers, then tighten the lag bolts with the socket wrench only

until the washers (T) are firm against the wall plate.

CAUTION: Avoid potential injuries or property damage! DO NOT over-tighten the lag bolts (U).

You’ll need

16"

40.6 cm

Center pencil mark made in

Step 5.

Wall Home

position

Full

extension

9.7 in. (24.7 cm)

7 in. (17.8 cm)

Top

Dessus

Parte superior

Top

Dessus

Parte superior

RF-TVMFM03V2 Template • Gabarit • Plantilla

Note: For wood frame installations, use a stud

nder to locate wood studs rst.

Remarque : Pour une construction à ossature

de bois, localiser d'abord les montants en bois,

à l'aide d'un détecteur de montants.

Nota: para la instalación en construcciones de

armazón de madera, primero debe localizar las

vigas de madera con un localizador de vigas.

Need help deciding how high to mount your TV? Scan this QR code.

Besoin d'aide pour déterminer la hauteur de montage du téléviseur? Numériser ce code QR.

¿Necesita ayuda para determinar la altura de montaje de su televisor? Escanee este código QR.

V2 13-0191

Tools Needed

Outils nécessaires

Herramientas requeridas

T (4)

Stud finder

U (4)

Pencil

Drill

7/32" wood drill bit

1/2" socket

wrench

Level

Tape

Wall plate (E)

Template (F)

Note: Minimum wood stud

size: Common 2 x 4 in.

(51 x 102 mm).

Nominal 1.5 x 3.5 in.

(38 x 89 mm)

RF-TVMFM03V2_13-0601_MAN_V3_ENG - GIF.fm Page 12 Tuesday, July 9, 2013 10:25 AM

13

Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)

RF-TVMFM03V2 TV Wall Mount

Step 7 Attach the arm assembly

1Hang the upper lip of the arm assembly (D) over the top edge on the wall plate (E), then lower the bottom lip

of the arm assembly into the bottom edge on the wall plate.

2Slide the arm assembly left or right on the wall plate to the location where you want the TV to be mounted.

3Secure the arm assembly (D) with the two cap screws (Zz) using the 5/32" hex key (Y). Do not overtighten

the screws.

You’ll need

Zz (2) Y (1)

D (1)

RF-TVMFM03V2_13-0601_MAN_V3_ENG - GIF.fm Page 13 Tuesday, July 9, 2013 10:25 AM

14 Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)

RF-TVMFM03V2 TV Wall Mount

Step 8 Leveling the arm assembly

1Loosen the two screws on the arm assembly using the 5/32" hex key (Y).

2Using a level, adjust the arm assembly ± 6° either clockwise or counter-clockwise to level it.

3Retighten the screws. Do not overtighten.

You’ll need

Leveling

Screw

Y (1) Level

RF-TVMFM03V2_13-0601_MAN_V3_ENG - GIF.fm Page 14 Tuesday, July 9, 2013 10:25 AM

15

Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)

RF-TVMFM03V2 TV Wall Mount

Step 9 Attach your TV to the wall mount

1Slide the top edge of the arm assembly under the upper horizontal bracket.

2Pivot the TV/bracket assembly down to align it with the bottom edge of the arm assembly (D).

3Align the center hole in the lower horizontal bracket (C) with the hole in the face of the arm assembly (D) and

secure your TV with the bracket screw (W). Do not overtighten the screw.

You’ll need

HEAVY! You will need

assistance with this step.

W (1) Phillips screwdriver

RF-TVMFM03V2_13-0601_MAN_V3_ENG - GIF.fm Page 15 Tuesday, July 9, 2013 10:25 AM

16 Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)

RF-TVMFM03V2 TV Wall Mount

Step 10 Adjusting the swivel tension

Adjust the swivel tension using the 5/32" hex key (Y). When you are done adjusting the swivel, tighten the screw,

but do not overtighten.

You’ll need

Y (1)

RF-TVMFM03V2_13-0601_MAN_V3_ENG - GIF.fm Page 16 Tuesday, July 9, 2013 10:25 AM

17

Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)

RF-TVMFM03V2 TV Wall Mount

Step 11 Adjusting the forward or backward tilt

Adjust the tilt of your TV forward or backward 11° using your fingers or a 3/16" hex key (Z). When you are done

adjusting the tilt tension, retighten the knob, but do not overtighten.

You’l l need

Z (1)

RF-TVMFM03V2_13-0601_MAN_V3_ENG - GIF.fm Page 17 Tuesday, July 9, 2013 10:25 AM

18 Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)

RF-TVMFM03V2 TV Wall Mount

Step 12 Managing cables

• Use the cable cover (G) to bundle the cables together, then attach to the arm assembly (D).

OR

• Use cable ties (X) to secure the cables to the arm assembly (D).

Note: You may have to readjust the forward or backward tilt after you bundle the cables.

For customer service, call: 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010

(Mexico)

You’ll need

X (5)

G (1)

RF-TVMFM03V2_13-0601_MAN_V3_ENG - GIF.fm Page 18 Tuesday, July 9, 2013 10:25 AM

V3 ENGLISH 13-0601

www.rocketfishproducts.com 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)

Distributed by Best Buy Purchasing, LLC

7601 Penn Avenue South, Richfield, MN 55423-3645 USA

© 2013 BBY Solutions, Inc.

All rights reserved. ROCKETFISH is a trademark of BBY Solutions, Inc.

All other products and brand names are trademarks of their respective owners.

Part number: 6907-002044 01

RF-TVMFM03V2_13-0601_MAN_V3_ENG - GIF.fm Page 20 Tuesday, July 9, 2013 10:25 AM