Rockford PMX5 DIGITAL MEDIA RECEVIER User Manual

Rockford Corporation DIGITAL MEDIA RECEVIER

User Manual

Installation assistance available at:www.rockfordfosgate.com/rftechROCKFORDFOSGATE.COM600 South Rockford Drive • Tempe, Arizona 85281 United StatesDirect: (480) 967-3565 • Toll Free: (800) 669-9899Printed in China1215141230-59542-01-AInstallation & OperationPMX5DIGITAL MEDIARECEIVERSerial Number: Date of Purchase: 0700Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: ETSI EN 301 489-1 V1.9.2: 2011 ETSI EN 301 489-17 V2.2.1: 2012 ETSI EN 300 328 V1.8.1: 2012 EN 62479: 2010 EN 60065: 2002+A1: 2006+A11: 2008+ A2: 2010+ A12: 2011 IC Caution. - English: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. - French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnement. Design for Shipborne
32Dear Customer,Congratulations on your purchase of the world’s finest brand of audio products. At Rockford Fosgate we are fanatics about musical reproduc-tion at its best, and we are pleased you chose our product. Through years of engineering expertise, hand craftsmanship and critical testing procedures, we have created a wide range of products that reproduce music with all the clarity and richness you deserve.For maximum performance we recommend you have your new Rockford Fosgate product installed by an Authorized Rockford Fosgate Dealer, as we provide specialized training through Rockford Technical Training Institute (RTTI). Please read your warranty and retain your receipt and original carton for possible future use.Great product and competent installations are only a piece of the puzzle when it comes to your system. Make sure that your installer is using 100% authentic installation accessories from Rockford Fosgate in your installation. Rockford Fosgate has everything from RCA cables and speaker wire to power wire and battery connectors. Insist on it! After all, your new system deserves nothing but the best.To add the finishing touch to your new Rockford Fosgate image, order your Rockford accessories, which include everything from T-shirts to hats.Visit our web site for the latest information on all Rockford products; www.rockfordfosgate.com or, in the U.S. call 1-800-669-9899 or FAX 1-800-398-3985. For all other coun-tries, call +001-480-967-3565 or FAX +001-480-966-3983.Table of ContentsIf, after reading your manual, you still have questions regarding this product, we recommend that you see your Rockford Fosgate dealer. If you need further assistance, you can call us direct at 1-800-669-9899. Be sure to have your serial number, model number and date of purchase available when you call.SafetyThis symbol with “WARNING” is intended to alert the user to the presence of important instructions. Failure to heed the instructions will result in severe injury or death.This symbol with “CAUTION” is intended to alert the user to the presence of important instructions. Failure to heed the instructions can result in injury or unit damage.To prevent injury and damage to the unit, please read and follow the instructions in this manual. We want you to enjoy this system, not get a headache.If you feel unsure about installing this system yourself, have it installed by a qualified Rockford Fosgate technician.Before installation, disconnect the battery negative (-) terminal to prevent damage to the unit, fire and/or possible injury.IntroductionPRACTICE SAFE SOUNDContinuous exposure to sound pressure levels over 100dB may cause permanent hearing loss. High powered auto sound systems may produce sound pressure levels well over 130dB. Use common sense and practice safe sound.Specifications©2015 Rockford Corporation. All Rights Reserved. PUNCH® and associated logos where applicable, are registered trademarks of Rockford Corporation in the United States and/or other countries. iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Rockford Corporation is under license. All other trademarks are the property of their respective owners. Specifications subject to change without notice.“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc. Used with permission. Pandora is only available in certain countries. Please visit http://www.pandora.com/legal for more information.Model PMX5Operating Voltage Fuse Rating 15A Idle Current 1APower Output 25 W X 4 @ 4 Ohms RMS50 W x 4 @ 2 Ohms PeakMax. RCA Output Voltage 2VOutput Impedance 500ΩFrequency Response 20 - 20kHzFM Frequency Range 87.5MHz - 107.9MHzAM Frequency Range 530kHz - 1710kHzWB Frequency Range 162.4 - 162.55(US & Canada)Tuner Presets 18 FM / 12 AM / 6 WBClock No ClockDisplay 2.7” Color TFTBluetooth 3.0+EDR, A2DPUSB Compatibility 3.0USB Output 1AMade for iPhone Model Names-iPhone 6 PlusiPhone 6iPhone 5SiPhone 5CiPhone 5iPhone 4SiPhone 4iPhone 3GSMade for iPod Model NamesiPod Touch (5th generation)iPod Touch (4th generation)iPod Nano (7th generation)iPod Nano (6th generation)Android Compatibility Bluetooth® OnlyAudio File Compatibility MP3, WMACompatible Wired RemotesPMX-1R, PMX-0R(3 Remote Limit,100 ft Total Wired Distance)CEA 2006Power ratings on Rockford Fosgate source units conform to CEA-2006 industry standards. These guidelines mean your source unit’s output power ratings are REAL POWER numbers, not inflated marketing ratings.2 Introduction3 Specifications4 Design Features5 Wiring6 Installation/Mounting7-10 OperationSettingsTuner (AM/FM/WB)USB-iPodAUX (Auxiliary Input)Bluetooth®Pandora®11 Troubleshooting12 Limited Warranty InformationWork Temperature -20 C---- +35 Co o FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. 12V DC (10.8 to 15.6V )
54Design Features / Wiring Installation / MountingContentsInstallation ConsiderationsThe following is a basic list of tools needed for installation:This section focuses on some of the vehicle considerations for installing your new source unit. Pre-planning your system layout and best wiring routes will save installation time. When deciding on the layout of your new system, be sure that each component will be easily accessible for making adjustments.If you feel unsure about installing this system yourself, have it installed by a qualified Rockford Audio technician.Before installation, disconnect the battery negative (-) terminal to prevent damage to the unit, fire and/or possible injury.Before beginning any installation, follow these simple rules:1. Be sure to carefully read and understand the instructions before attempting to install the unit.2. For safety, disconnect the negative lead from the battery prior to beginning the installation.3. For easier assembly, we suggest you run all wires prior to mounting your unit in place.4. Route all of the RCA cables close together and away from any high current wires.5. Use high quality connectors for a reliable installation and to minimize signal or power loss.6. Think before you drill! Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic lines, vacuum lines or electrical wiring when working on any vehicle.7. Never run wires underneath the vehicle. Running the wires inside the vehicle provides the best protection.8. Avoid running wires over or through sharp edges. Use rubber or plastic grommets to protect any wires routed through metal, especially the firewall.9. ALWAYS protect the battery and electrical system from damage with proper fusing. Install the appropriate fuse holder and fuse on the +12V power wire within 18” (45.7 cm) of the battery terminal.10. When grounding to the chassis of the vehicle, scrape all paint from the metal to ensure a good, clean ground connection. Grounding connections should be as short as possible and always be connected to metal that is welded to the main body, or chassis, of the vehicle. Seatbelt bolts should never be used for connecting to ground.• Volt/Ohm meter• Wire strippers• Wire crimpers• Wire cutters• #2 Phillips screwdriver• Battery post wrench• Hand held drill w/ assorted bits• Heat shrink tubing• Soldering iron• Solder• Heat gun• Source Unit• Trim Bezel• Mounting Plate• Screws• Power / Speaker Harness• Installation & Operation ManualMountingTo mount the unit, you will need to find a flat surface with adequate clearance behind that provides enough clearance for the unit and all it’s necessary wiring.1. Once you have determined a mounting location, you will need to cut a rectangular shaped hole in the panel (7” X 2.1” / 180mm X 52mm).2. After the hole is cut slide the unit and wiring through the hole.3. Slide the mounting plate over the backside of the unit and secure with the supplied screws.4. Next, install the back strap to the back of the unit to prevent the source unit from excessive vibration.5. Press on the trim bezel on the front side of the unit.6. Plug in all wiring harnesses and cables. Refer to the wiring diagram for wire harness connection types. 1234561 2 34 5 67 8 910 11 123 2 16 5 49 8 712 11 10ORIENTATIONSECTION A-A SECTION B-B1GREEN SPEAKER REAR LEFT (+) 20PIN # WIRE COLOR WIRE DEFINITION AWG2GREEN/BLACK SPEAKER REAR LEFT (-) 203RED +12V ACC IGN SWITCH 164WHITE SPEAKER FRONT LEFT (+) 205WHITE/BLACK SPEAKER FRONT LEFT (-) 206ORANGE ILLUMINATION INPUT 207GREY SPEAKER FRONT RIGHT (+) 208GREY/BLACK SPEAKER FRONT RIGHT (-) 209BLUE/WHITE 12V AMP REMOTE TURN ON 2010PURPLE SPEAKER REAR RIGHT (+) 2011 PURPLE/BLACK SPEAKER REAR RIGHT (-) 2012BLACK GROUND (-) 16CAN BUSRED(ZONE2 LINE OUT RIGHT)WHITE(ZONE2 LINE OUT LEFT)RED(AUX IN RIGHT)WHITE(AUX IN LEFT)SIRIUSXMSWIANTENNAREDWHITEREDWHITEREDWHITEREAR LINE OUTFRONT LINE OUTSUB - W OUTUSBBLACKGREENREDBLACKBLACKBLACKGREYPURPLEBLACKBLACKBLACKREMOTE CABLERED15AFUSEAABBREDBLACKPURPLE/BLACKPURPLEBLUE/WHITEGRAY/BLACKGRAYGREEN/BLACKGREENORANGEWHITE/BLACKWHITETrim BezelPanelBack StrapMounting ScrewsMounting PlateSource UnitRotary EncoderThis knob is for adjusting main volume, zone volumes, menu navigation and setting adjustments.REV / FWD buttonUse this button to skip back and forward through channels or tracks with a short press. Long pressing will activate manual seek mode.MENU buttonThis button gives you access to the main settings of the unit by long pressing. Short pressing will give you access to the settings for the active source.PRESET buttonsThese buttons allow you to set presets and allow quick access to them once set. Simple long press to retain the channel and short press to recall the channel.RESET buttonPressing this button will reset the unit to factory settings and clearing all saved settings. Use a paper clip or small pick to press.DIMMER buttonPressing this button will allow you to select between the two brightness values for the display.PLAY / PAUSE buttonPressing this button play or pause your music. This button also acts as a MUTE when the source is AUX & TUNER.SRC (Power) ButtonThis button allows you to switch between sources and power the unit ON and OFF.SUB ButtonsThese buttons allow you to adjust the sub-woofer output UP or DOWN (0-20).A SXV300 Connect Vehicle Tuner is required for SIRIUSXM. (Sold separately)For vehicles with Steering Wheel Control the use of the PAC SWI-RC or Metra Axxess ASWC-1 interface module is required. When the PAC unit is being used, set the radio selection settings for Rockford. If the Metra unit is being used, it settings are automatically set up.(Sold separately)
76Settings OperationUPDATE - Short press the encoder button to update the firmware. Follow the instructions on the screen when updating.FACTORY DEFAULTAUDIO – Short press the encoder button to access. Rotate the encoder button to select YES/NO. Selecting YES will reset your unit back to factory default settings.SYSTEM - Short press the encoder button to access. Rotate the encoder button to select YES/NO. Selecting YES will reset your unit back to factory default settings.Basic OperationTURNING THE UNIT ON / OFFLong press the SRC (Power) button to turn the unit ON or OFFADJUSTING THE VOLUMEShort press the encoder button to independently adjust the volume for a specific zone (ZONE 1>ZONE>ALL). Rotate encoder knob left or right to desired volume level (0-40). The current volume level will be displayed during adjustment.ADJUSTING THE SUBWOOFER OUTPUTPress the SUB + or SUB- buttons to adjust the output level (0-20).ADJUSTING THE SCREEN BRIGHTNESSShort press the SCREEN BRIGHTNESS button to adjust the brightness level. There are two brightness levels.SELECTING A SOURCE TO PLAYShort press the SRC button to show the different source options (FM TUNER>AM TUNER>WB TUNER>USB>AUX>BLUETOOTH>PANDORA>SIRIUSXM). Use the rotary encoder or short press the SRC button to scroll through sources.SELECTING A ZONELong press the encoder button to toggle between source zones (ZONE 1>ZONE 2)Tuner Operation (FM/AM/WB)To operate, use the rotary encoder to select the tuner source you want to listen to (FM>AM>WB).To AUTO SEEK stations, short press the FWD and REV buttons. To MANUAL SEEK stations, long press the FWD and REV buttons to tune to the desired frequency.To MUTE the TUNER, short press the PLAY/PAUSE button. FM BAND SETTINGSTo access the FM BAND SETTINGS, short press the MENU when using the FM TUNER source. This will give you access to the settings specific to the FM TUNER (FM>PRESETS>ADD PRESETS>REMOVE PRESETS>AUTO STORE>LOCAL).PRESETSShort press the encoder button to access the PRESETS list. Using this feature allows to you see what PRESETS are saved on the unit.ADD PRESETSShort press the encoder button on the ADD PRESETS option. You will need to be on both the station and PRESET group you want to add first (FM1>FM2>FM3). Using this feature allows to you save stations to the unit. Once selected, use the rotary encoder to select the PRESET number (1-6) you want the station saved to.REMOVE PRESETSShort press the encoder button on the REMOVE PRESETS option. You will need to be under the PRESET group you want to adjust first (FM1>FM2>FM3). Using this feature allows to you remove saved stations on the unit. Once selected, use the rotary encoder to select the PRESET number (1-6) of the station you want removed.FMShort press the encoder button to access the FM PRESET options (FM1>FM2>FM3). Using this feature allows to you have separate tuner preset groups to choose from. Use the rotary encoder button to scroll through the TUNER groups and short press to select the group.AUTO STOREShort press the encoder button to access the AUTO STORE function. You will need to be under the PRESET group you want to adjust first (FM1>FM2>FM3). This feature automatically stores presets on the unit. It will stop when presets 1-6 are set. Select the next PRESET group and repeat to fill next set.LOCALShort press the encoder button to access the LOCAL options. Once selected, use the rotary encoder to select ON or OFF. The local option tunes to nearby radio stations with sufficiently strong signals for good reception. In areas where reception is poor, switching to distance tuning enables the unit to tune in to more distant stations. Distance tuning is the default.AM BAND SETTINGSTo access the AM BAND SETTINGS, short press the MENU when using the AM TUNER source. This will give you access to the settings specific to the AM TUNER (AM>PRESETS>ADD PRESETS>REMOVE PRESETS>AUTO STORE>LOCAL).PRESETSShort press the encoder button to access the PRESETS list. Using this feature allows to you see what PRESETS are saved on the unit.ADD PRESETSShort press the encoder button on the ADD PRESETS option. You will need to be on both the station and PRESET group you want to add first (AM1>AM2). Using this feature allows you to save stations to the unit. Once selected, use the rotary encoder to select the PRESET number (1-6) you want the station saved to.REMOVE PRESETSShort press the encoder button on the REMOVE PRESETS option. You will need to be under the PRESET group you want to adjust first (AM1>AM2). Using this feature allows you to remove saved stations on the unit. Once selected, use the rotary encoder to select the PRESET number (1-6) of the station you want removed.AMShort press the encoder button to access the FM PRESET options (AM1>AM2). Using this feature allows you to have separate tuner preset groups to choose from. Use the rotary encoder button to scroll through the TUNER groups and short press to select the group.AUTO STOREShort press the encoder button to access the AUTO STORE function. You will need to be under the PRESET group you want to adjust first (AM1>AM2). This feature automatically stores presets on the unit. It will stop when presets 1-6 are set. Select the next PRESET group and repeat to fill next set.Source Unit SettingsTo access the source unit’s settings, long press the MENU button until the options appear. Rotate the encoder to scroll through the list of settings and short press the encoder button to select the setting you wish to change. (ZONES>BALANCE>FADER>AUDIO>VOLTAGE GAUGE>BT PAIRING>BEEP>TUNER REGION>SOFTWARE>FACTORY DEFAULT)This source unit has a zero current draw when turned off. All of your settings and presets will be saved along with your boat’s battery during storage.ZONESZONE 1 / ZONE 2To setup ZONE 1 or ZONE 2, short press the encoder button to access the submenu. Rotate the encoder button to select ZONE options. (SOURCE > RENAME > ENABLE/DISABLE/LOCK)SOURCETo select the source, short press the encoder button to access the submenu. Use the rotary encoder to scroll through EQ Settings. (FM TUNER > AM TUNER > WB TUNER > USB > AUX > BLUETOOTH > PANDORA > SIRIUSXM)RENAMETo rename ZONE, short press the encoder button to set the first letter of the new name. Once active, rotate encoder to adjust letters. Short press the encoder button again to set the next letter. Repeat until ZONE has been renamed. Short press MENU to exit and go back up one level.ENABLE / DISABLE / LOCKShort press the encoder button to access. Rotate the encoder button to select ENABLE/DISABLE/LOCK. Selecting LOCK will enable ZONE 2 and LOCK the source of ZONE 2 to ZONE 1.BALANCEShort press the encoder button to access BALANCE adjustment settings. Rotate the encoder button to set output BALANCE.FADERShort press the encoder button to access FADER adjustment settings. Rotate the encoder button to set output FADER.AUDIOTo access the AUDIO settings, short press the AUDIO option from the MENU screen. Rotate the encoder to scroll through the list of settings and short press the encoder button to select the setting you wish to change. (7 BAND EQ>CROSSOVER>PEQ>REAR RCA>AUX INPUT>SOURCE GAIN>INTERNAL AMPLIFIER)7 BAND EQShort press the encoder button to access the 7 BAND EQ settings. Use the rotary encoder to scroll through the EQ settings. (FLAT > ROCK > CLASSIC > ACOUSTIC > DANCE > ELECTRONIC > HIP-HOP > CUSTOM) When setting up the CUSTOM EQ, short press the encoder button to set the first frequency. Once active, rotate the encoder to adjust the frequency settings. Short press encoder button again to access the next frequency. Repeat until all EQ settings are complete. Short press the MENU button to exit and go back up one level.CROSSOVERShort press to access the CROSSOVER settings. Use the rotary encoder to select the crossover zone options (FRONT>REAR>SUB). Short press the encoder to adjust the frequency of the crossover (60Hz>80Hz>120Hz>APF). Short press MENU to exit and go back up one level.PUNCH EQShort press to access the PUNCH EQ settings. Use the rotary encoder to adjust the gain output (0-12). Short press MENU to exit and go back up one level.Punch EQ is an onboard equalizer with up to +18dB @ 45Hz and/or up to +12dB boost at 12.5kHzAUX INPUTRENAME – To rename AUX, short press the encoder button to set the first letter of the new name. Once active, rotate encoder to adjust letters. Short press the encoder button again to set the next letter. Repeat until AUX has been renamed. Short press MENU to exit and go back up one level.ENABLE - Short press the encoder button to access options. Rotate the encoder button to select if unit is discoverable. (ENABLE > DISABLE)SOURCE GAINTo adjust the level of device input gain, scroll through the inputs (FM TUNER>AM TUNER>WB TUNER>USB>AUX>BLUETOOTH>PANDORA>SIRIUSXM) to the device you want to adjust, short press the encoder button to access the gain settings. Rotate the encoder button to set the level of gain. (-3dB > -2dB > -1dB > 0dB > +1dB > +2dB > +3dB) INTERNAL AMPLIFIERShort press to access the INTERNAL AMPLIFIER options. Use the rotary encoder to select options (ON>OFF). When using an amplifier to power your speakers, select OFF. If you are powering your speakers directly from the source unit, select the INTERNAL AMPLIFIER to ON.VOLTAGE GAUGETo display the vehicle voltage, short press the encoder button on the VOLTAGE GAUGE option. BT DEVICE PAIRINGShort press the encoder button to access options. Rotate the encoder button to select if unit is discoverable for pairing. (ENABLE > DISABLE) Once enabled, the source unit is now discoverable and ready for pairing to your device. Open the Bluetooth settings on your device to find the source unit labeled “Rockford PMX” and select.BEEPShort press the encoder button to access the BEEP options. Rotate the encoder button to turn system beep ON/ OFF.TUNER REGIONTo adjust, short press the encoder button to access. Rotate the encoder button to select the TUNER REGION of your preference. (EUROPE > USA > RUSSIA > LATIN > ASIA > JAPAN > MIDEAST > AUSTRALIA)SOFTWAREVERSION - Short press the encoder button to display the current firmware version of the unit.
98LOCALShort press the encoder button to access the LOCAL options. Once selected, use the rotary encoder to select ON or OFF. The local option tunes to nearby radio stations with sufficiently strong signals for good reception. In areas where reception is poor, switching to distance tuning enables the unit to tune in to more distant stations. Distance tuning is the default.WB BAND SETTINGSTo access the WB BAND SETTINGS, short press the MENU when using the WB TUNER source. This will give you access to the settings specific to the WB TUNER (PRESETS>ADD PRESETS>REMOVE PRESETS).PRESETSShort press the encoder button to access the PRESETS list. Using this feature allows to you see what PRESETS are saved on the unit.ADD PRESETSShort press the encoder button on the ADD PRESETS option. You will need to be on both the station you want to add first. Using this feature allows to you save stations to the unit. Once selected, use the rotary encoder to select the PRESET number (1-6) you want the station saved to.REMOVE PRESETSShort press the encoder button on the REMOVE PRESETS option. You will need to be under the PRESET group you want to adjust first (AM1>AM2). Using this feature allows to you remove saved stations on the unit. Once selected, use the rotary encoder to select the PRESET number (1-6) of the station you want removed.USB (iPod) OperationAfter your device is connected to the source unit, this feature allows you to control playback from your device directly from the unit. Select the USB source option on the source unit. To play or pause a song, short press the PLAY/PAUSE button.To skip a track forward, short press the FWD button. To skip a track backwards, short press the REV button.To access USB specific settings, short press the MENU button for the list of settings (BROWSER>REPEAT>SHUFFLE). Use the encoder to select the option to change.BROWSERShort press the encoder button to access the BROWSER options (PLAYLISTS>ARTISTS>ALBUMS>GENRES>SONGS>COMPOSERS>AUDIOBOOKS>PODCASTS). Using this feature allows you to search for tracks or songs by different types of categories.REPEATShort press the encoder button to access the REPEAT feature options (OFF>ONE>ALL).SHUFFLEShort press the encoder button to access the SHUFFLE feature options (OFF>ALL). This feature allows you to set your preference on shuffling tracks or songs.AUX OperationAfter your device is plugged into the source unit, this feature allows you to play music from your device. Select the AUX source option on the source unit and use your plugged in device to control song/track selection, PLAY/PAUSE and track skip FWD/REV.Settings OperationBluetooth® OperationAfter your device is paired to the source unit, this feature allows you to control playback from your device directly from the unit. Select the BLUETOOTH source option on the source unit.To play or pause a song, short press the PLAY/PAUSE button.To skip a track forward, short press the FWD button. To skip a track backwards, short press the REV button.To access BLUETOOTH specific settings, short press the MENU button for the list of settings (BROWSER>REPEAT>SHUFFLE). Use the encoder to select the option to change.BROWSERShort press the encoder button to access the BROWSER options (PLAYLISTS>ARTISTS>ALBUMS>GENRES>SONGS>COMPOSERS>AUDIOBOOKS>PODCASTS). Using this feature allows you to search for tracks or songs by different types of categories.REPEATShort press the encoder button to access the REPEAT feature options (OFF>ONE>ALL). This feature allows you to set your preference on the amount of times a track or song will repeat.SHUFFLEShort press the encoder button to access the SHUFFLE feature options (OFF>ALL). This feature allows you to set your preference on shuffling tracks or songs.Pandora®This feature allows you to control the Pandora® app from the source unit directly (Android users will have to use Bluetooth only, iOS users can use both USB and Bluetooth). You will need to start the Pandora® app on your device first, then select the Pandora® source option on the source unit. To use the “Thumbs Up” feature, long press the SUB+ button. To use the “Thumbs down” feature, long press the SUB - button. To play or pause a song, short press the PLAY/PAUSE button.To skip a track forward, short press the FWD button. To access Pandora® specific settings, short press the MENU button for the list of settings (STATIONS>BOOKMARKS>STATIONS MANAGE). Use the encoder to select the option to change.STATIONSTo adjust, short press the encoder button to access. Rotate the encoder button to select your options (SHUFFLE>SORT DATE/A-Z>STATIONS). Selecting the SHUFFLE option will shuffle your stations and selecting the SORT feature will sort your stations by date added or alphabetically. You can also select your saved stations directly from this list.BOOKMARKSTo BOOKMARK an artist or track that is playing, short press the encoder button to display your BOOKMARK options (ARTIST>TRACK). Select the option you wish to use for bookmarking.STATIONS MANAGETo create stations, short press the encoder button to display your STATION MANAGE options (CREATE FROM ARTIST> CREATE FROM TRACK> CREATE FROM GENRE>DELETE). Selecting the CREATE FROM ARTIST OPTION allows you to create a station from the artist that you are currently listening to. CREATE FROM TRACK works similarly by creating a station from the current track being played. If you create a station by selecting CREATE FROM GENRE, this will give you music genres to select from to create your station. Selecting DELETE will delete the now playing station.Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc. Used with permission. Pandora is only available in certain countries. Please visit http://www.pandora.com/legal for more information.
1110Operation TroubleshootingSiriusXM®Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commerical-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit www.siriusxm.comACTIVATING YOUR SIRIUSXM SUBSCRIPTIONAfter installing your SiriusXM Connect Vehicle Tuner and antenna, power on your source unit and select SiriusXM mode. You should be able to hear the SiriusXM Preview channel on Channel 1. If you cannot hear the preview channels, please check the installation instructions to make sure your SiriusXM Connect tuner is properly installed.After you can hear the Preview channel, tune to Channel 0 to find the Radio ID of your tuner. In addition, the Radio ID is located on the bottom of the SiriusXM Connect Vehicle Tuner and its’ packaging. You will need this number to activate your subscription. Write the number down for reference.Note: the SiriusXM Radio ID does not include the letters I, O, S or F.In the USA, you can activate online or by calling SiriusXM Listener care:• Visit www.siriusxm.com/activate now• Call SiriusXM Listener Care at 1-866-635-2349For Canadian Subscriptions, please contact:• Visit www.siriusxm.ca/activatexm• Call XM customer Care at 1-877-438-9677As part of the activation process, the SiriusXM satellites will send an activa-tion message to your tuner. When your radio detects that the tuner has received the activation message, your radio will display: “Subscription Updated”. Once subscribed, you can tune to channels in your subscription plan. Note, the activa-tion process usually takes 10 to 15 minutes, but may take up to an hour. Your radio will need to be powered on and receiving the SiriusXM signal to receive the activation message.HOW TO FIND THE RADIO IDThe SiriusXM Radio ID is required for activation and can be found by tuning to Channel 0 as well as on the label found on the siriusXM connect tuner and its’ packaging. The Radio ID does not include the letters I, O, S or F.SETTINGSTo access the SiriusXM SETTINGS, short press the MENU when using the SiriusXM source. This will give you access to the settings specific to SiriusXM (SXM>PRESETS>ADD PRESETS>REMOVE PRESETS>CHANNELS>CATEGORY).SXMShort press the encoder button to access the SiriusXM PRESET options (SXM1>SXM2>SXM3). Using this feature allows to you have separate satellite preset groups to choose from. Use the FWD and REV buttons to scroll through the TUNER groups.PRESETSShort press the encoder button to access the PRESETS list. Using this feature allows to you see what PRESETS are saved on the unit.ADD PRESETSShort press the encoder button on the ADD PRESETS option. You will need to be on both the station and PRESET group you want to add first (SXM1>SXM2>SXM3). Using this feature allows to you save stations to the unit. Once selected, use the rotary encoder to select the PRESET number (1-6) you want the station saved to.REMOVE PRESETSShort press the encoder button on the REMOVE PRESETS option. You will need to be under the PRESET group you want to adjust first (SXM1>SXM2>SXM3). Using this feature allows to you remove saved stations on the unit. Once selected, use the rotary encoder to select the PRESET number (1-6) of the station you want removed.CHANNELShort press the encoder button on the CHANNEL option to select this feature. This feature displays a complete listing of channels.CATEGORYShort press the encoder button on the CATEGORY option to select this feature. This feature allows you to search channels based on their CATEGORY type.DIRECT TUNINGShort press the encoder button on the DIRECT TUNING option to select this feature. This feature allows you to directly tune to a station if you already know the channel number. Rotate the encoder to until you reach the desired number and press to enter your selection. Repeat until the channel number is completed.PARENTAL CONTROLSShort press the encoder button on the PARENTAL CONTROL option to select this feature. This feature allows you to easily lock and unlock channels with mature content. To turn this feature on, short press the encoder on PARENTAL CONTROLS to select. You will be asked to enter a code to activate. Enter “1111” for your code. Once the code is entered correctly, this will give you access to the PARENTAL CONTROL features (LOCK CHANNELS>CHANGE MY CODE). Use the encoder knob to scroll through the options and short press to select.LOCK CHANNELSShort press the encoder button on the LOCK CHANNELS option to select this feature. This feature allows you to select certain channels to be locked out for listening. When trying to listen to locked channels, you will need to enter the correct access code to listen. Use the rotary encoder to input code.CHANGE MY CODE Short press the encoder button on the CHANGE MY CODE option to reset the PARENTAL CONTROL access code. Use the rotary encoder to input code. Symptom / Advisory Diagnosis RemedyBasicSource unit does not turn on.Blown fuse Check fuse of the unit, replace with correct rating.Vehicle’s ignition is off If connected following the instructions, the unit will not operate with ignition off.Voltage applied to Red wire is not between 10.5 & 16 volts or there is no voltage presentCheck battery, connections and fuses and repair or replace as necessary. If voltage is above +16 volts, have the electrical system inspected by an authorized service center.Unit is not properly grounded Check wiring and repair as necessary.Radio TunerTuner fails to tune any stations No antenna or disconnected or open connection in cable Check all connections and repair as necessary.Unable to tune stations in seek mode You are in a weak signal area Make sure the tuner LOC mode is off.USB DevicesUSB device cannot be insertedThe USB device has been inserted in the wrong direction Reversing the connection direction of the USB device, try reinserting.The USB device connector is broken Replace with a new USB device.USB device is not recognizedThe USB device is damaged Disconnect USB device and reconnect. If the device is still not recognized, try replacing with a different USB device.USB does not work with Android devices.Connectors are looseNo sound heard with the display “No File” shown No MP3/WMA files are stored on the USB device Store these files properly on the USB device. USB does not work with Android devices.Sound skips or is noisy MP3/WMA files are not created properly Use MP3/WMA files that are encoded correctly.AUXMP3 is not playing back Writing error occurred. The MP3 format is not compatible. Make sure MP3 has been written in a supported formatSIRIUSXMCheck Antenna The radio has detected a fault with the SiriusXM antenna. The antenna cable may be either disconnected or damaged.Verify that the antenna cable is connected to the SiriusXM Connect TunerInspect the antenna cable for damage and kinks. Replace the antenna if the cable is damaged.SiriusXM product are available at your local car audio retailer or online at www.shop.siriusxm.comCheck TunerThe radio is having difficulty communicating with the SiriusXM Connect Vehicle Tuner. The tuner may be disconnected or dam-aged.Verify that the SiriusXM Connect Vehicle Tuner cable is securely connected to the radioNo Signal The SiriusXM Connect Vehicle Tuner is having difficulty receiving the SiriusXM satellite signal.Verify that your vehicle is outdoors with a clear view of the sky.Verify that the SiriusXM magnetic mount antenna is mounted on a metal surface on the outside the vehicle.Move the SiriusXM antenna away from any obstructions.Inspect the antenna cable for damage and kinks.Consult the SiriusXM Connect Vehicle tuner installation manual for more information on antenna installation. Replace the antenna if the cable is damaged. SiriusXM products are available at your local car audio retailer or online at www.shop.siriusxm.com.Subscription Updated The radio has detected a change in your SiriusXM subscription status. Press <<product specific button>> to clear the message.Visit www.siriusxm.com or call 866-635- 2349 if you have questions about your subscription.Channel Not AvailableThe channel that you have requested is not a valid SiriusXM chan-nel or he channel that you were listening to is no longer available. You may also see this message briefly when first connecting a new SiriusXM Connect Vehicle tuner.Visit www.siriusxm.com for more information about the SiriusXM channel lineup.Channel Not SubscribedThe channel that you have requested is not included in your SiriusXM subscription package or the channel that you were listening to is no longer included in your SiriusXM subscription package.Visit www.siriusxm.com or call 866- 635-2349 if you have questions about your subscription package or would like to subscribe to this channel.Channel Locked The channel that you have requested is Locked by the radio Parental Control feature. See page 10 for more information on the Parental Control feature and how to access locked channels.
12Rockford Corporation offers a limited warranty on Rockford Fosgate products on the following terms:Length of WarrantyPOWER Amplifiers – 2 Years BMW® Direct Fit Speakers – 2 Years Source Units – 1 Year All other products – 1 Year Any Factory Refurbished Product – 90 days (receipt required)What is CoveredThis warranty applies only to Rockford Fosgate products sold to consumers by Authorized Rockford Fosgate Dealers in the United States of America or its possessions. Product purchased by consumers from an Authorized Rockford Fosgate Dealer in another country are covered only by that country’s Distributor and not by Rockford Corpo-ration.Who is CoveredThis warranty covers only the original purchaser of Rockford product purchased from an Authorized Rockford Fosgate Dealer in the United States. In order to receive service, the purchaser must provide Rockford with a copy of the receipt stating the customer name, dealer name, product purchased and date of purchase.Products found to be defective during the warranty period will be repaired or replaced (with a product deemed to be equivalent) at Rockford’s discretion.What is Not Covered1. Damage caused by accident, abuse, improper operations,water, theft, shipping.2. Any cost or expense related to the removal or reinstallation of product.3. Service performed by anyone other than Rockford or an Authorized Rockford Fosgate Service Center.4. Any product which has had the serial number defaced, altered, or removed.5. Subsequent damage to other components.6. Any product purchased outside the U.S.7. Any product not purchased from an Authorized Rockford Fosgate Dealer.Limit on Implied WarrantiesAny implied warranties including warranties of fitness for use and merchantability are limited in duration to the period of the express warranty set forth above. Some states do not allow limitations on the length of an implied warranty, so this limitation may not apply. No person is authorized to assume for Rockford Fosgate any other liability in connection with the sale of the product.How to Obtain ServiceContact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.EU WarrantyThis product meets the current EU warranty requirements, see your Authorized dealer for details.Warranty

Navigation menu