Rockwell Tools Stratix 8000 Ethernet 1783 Ms06T Users Manual Managed Switches Hardware User

2015-02-06

• 1783-UM002C-EN-E, Stratix 8000 Ethernet Managed Switches Hardware User Manual
• Preface
  • About This Publication
  • Who Should Use This Publication
  • Additional Resources
• Table of Contents
• 1 - Start
  • About the Switches
  • Power and Relay Connector
  • Console Port
  • Dual-Purpose Uplink Ports
  • 10/100 Ports
  • 100BASE-FX Ports
  • Rear Panel
  • Cabling
    • Auto-MDIX Feature
  • Status Indicators
    • Switch and Port Status Indicators
    • Dual-purpose Port Status Indicators
    • Expansion Module Status Indicators
  • CompactFlash Memory Card
• 2 - Install the Switch
  • Installation Guidelines
    • Environment and Enclosure Guidelines
  • Before You Begin
    • Place the Switch
  • Verify Package Contents
  • Add Modules to the Switch
    • Expansion Module Configurations
  • Install the Switch
    • Attach Expansion Modules (optional)
    • Mount the Switch
    • Install the SFP Module (optional)
    • Ground the Switch
    • Wire the DC Power Source
    • Attach the Power and Relay Connector
    • Wire the External Alarms (Optional)
  • Install or Remove the CompactFlash Card
  • Set Up the Switch Initially with Express Setup
  • Configure and Manage the Switch
    • Use the Device Manager Web Interface
    • Use RSLogix 5000 Software
    • Download Cisco Network Assistant
    • Use the Command-Line Interface
    • Use SNMP Management Applications
  • Reset the Switch to Factory Defaults
  • Connect to the Switch Ports
    • Connect to 10/100 Copper Ports
    • Connect to Dual-purpose Uplink (10/100/1000 and SFP Fiber) Ports
    • Connect to 100BaseFX Ports
  • Verify Port Connectivity
  • Verify Switch Operation
  • Connect a Computer or a Terminal to the Console Port
  • Run a Power-on Self-test (POST)
  • Verify POST Results
  • Disconnect Power
  • Install and Remove SFP Modules
    • Install SFP Modules into SFP Module Slots
    • Remove SFP Modules from SFP Module Slots
  • Connect to SFP Modules
• 3 - Troubleshoot the Switch
  • Obtain Troubleshooting Information
  • Verify Switch POST Results
    • View POST Results With a Terminal
  • Verify Switch Status Indicators
  • Verify Switch Connections
    • Bad or Damaged Cable
    • Ethernet and Fiber Cables
    • Link Status
    • Transceiver Issues
    • Port and Interface Settings
  • Verify Switch Performance
    • Speed, Duplex, and Autonegotiation
    • Autonegotiation and Network Interface Cards (NICs)
    • Cabling Distance
  • Obtain Configuration Information
• 4 - Cable and Connectors
  • 10/100 and 10/100/1000 Ports
    • Connect to 10BASE-T- and 100BASE-TX-Compatible Devices
  • 100BASE-FX Ports
  • SFP Module Ports
  • Dual-purpose Ports
  • Console Port
  • Cable and Adapter Specifications
    • SFP Module Cable Specifications
  • Adapter Pinouts
• Index
  • Numerics
  • A
  • C
  • D
  • E
  • F
  • H
  • I
  • L
  • N
  • P
  • R
  • S
  • T
  • V
  • W
    • Installation Assistance
    • New Product Satisfaction Return
• Back Cover