Rodan and Fields ENHMM01 Rodan + Fields Moisture Meter (Skin Moisture detector) User Manual

Rodan & Fields, LLC Rodan + Fields Moisture Meter (Skin Moisture detector)

User Manual

For iOS 7 and above for iPod Touch, iPhone or iPad. Bluetooth 4.0.
For Android 4.3 and above (Support for Android 4.3 or below
after upgrading). Bluetooth 4.0.
To Use
Unscrew protective cap to
expose sensors
Turn on the Bluetooth switch and
Power supply: 1 x CR2032 /3 V
Capacity: 300mAh
Communication distance: above 5 m
Design size: 30 x 68 x 20.5mm
Weight: 19g
connect with the App
5 seconds later the test results
are shown in your phone’s App
Press the button at the bottom of the product. When
the indicator flashes, then the product’s Bluetooth
connection is successful and displayed on your phone
Touch the metal probe to an area of skin, click on the
site test on your phone’s display. When the indicator
lights turn on, testing is underway
SPECIFICATIONS:
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two
conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any
interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the party
responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses
instructions, may cause harmful interference to radio communications.
However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that
to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Warnings:
This device complies with Industry Canada’s licence-exempt RSSs
Operation is subject to the following two conditions:
(1) This device may not cause interference and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence.L'exploitation est
autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
MOISTURE METER
ENHMM01
Dist. Rodan & Fields, LLC San Francisco, CA 94105
Produced in USA with Domestic and Foreign Ingredients
AAWA125 8502-02-0038 (6002-02-5063)
Please Recycle
US: QUESTIONS OR COMMENTS 1-888-995-5656
visit rodanandelds.com
AUS: QUESTIONS OR COMMENTS 1800 731 860
visit rodanandelds.com.au

Navigation menu