Rohde and Schwarz SV7000FLO DMQ-T Sender (Transmitter) User Manual Exhibit D SV7000 Family General Specifications pub
Rohde & Schwarz Inc DMQ-T Sender (Transmitter) Exhibit D SV7000 Family General Specifications pub
Exhibit D SV7000 Transmitter Family General Specifications
![SV7000 series Transmitter FCC Certification Application Exhibit D25 July 2K7 Page 1EXHIBIT DSV7000 TRANSMITTER FAMILY SPECIFICATIONS](https://usermanual.wiki/Rohde-and-Schwarz/SV7000FLO/User-Guide-826405-Page-1.png)
![SV7000 series Transmitter FCC Certification Application Exhibit D25 July 2K7 Page 2Transmitter Family NV7000 General SpecificationsFrequency Range.......................................................................470 to 862 MHzStandard.....................................................................................EN 300 744DVB Bandwidth........................................................................6, 7 or 8 MHzSFN Function ...........................................................................to TS 101 191Permissible VSWR....................................................................s ≤1.3Output Stage Technology .........................................................LDMOS transistorCoolant ......................................................................................air coolingMax. Installation Altitude..........................................................6,500 feet AMSL (>9,800 feet on request).........................................................[2,000 meters AMSL (>3, 000 meters on request)]Operating Temperature Rangein Transmitter Room......................................................+34° to 113° F (+1° to +45° C)Max. Relative Humidity ............................................................95%, non condensingEMC .........................................................................................to ETS 300 447AC Supply Voltage....................................................................200 ... 240 VAC Line Frequency ...................................................................50 or 60 Hz ±10 %Power Factor..............................................................................min. 0.98Total Noise Level .....................................................................< 65 dBAFrequency ProcessingSynthesizer ................................................................................adjustable between 112.5 MHz and 900 MHzStep Width ................................................................................1 HzConnection................................................................................. internal OCXO (10 MHz), internal GPSreceiver (optional) or externalTransfer CharacteristicsTransmission Parameters...........................................................to ETS 300 744Input Data Rate..........................................................................5 to 40 Mbit/s (dep. on operating mode)Frequency Response fo+/-3.805 MHz ......................................≤1 dBIntermodulation suppressionDVB Bandwidth 8 MHzat fo+/-4.2 MHz (without output bandpass filter) ..........≤-36 dB (with precorrection)DVB Bandwidth 7 MHzat fo+/-3.7 MHz (without output bandpass filter) ...........≤-36 dB (with precorrection)Parasitic Emissions....................................................................not detectableCompliance with Spectrum Mask..............................................to ETS No. pr 300 744 with output bandpass](https://usermanual.wiki/Rohde-and-Schwarz/SV7000FLO/User-Guide-826405-Page-2.png)
![SV7000 series Transmitter FCC Certification Application Exhibit D25 July 2K7 Page 3Transmitter Family NV7000 General Specifications (continued)Spurious EmissionsNoise Power Density .....................................................≥130 dBc/HzConnectors (Inputs)ASI A 1/2 (LP) ..........................................................................MPEG2; ASI, BNC, 75 Ω; input A or main andstandby path for low-priority data streamASI B 1/2 (LP) .......................................................................... MPEG2; ASI, BNC, 75 Ω; input B or main andstandby path for low-priority data streamReference Frequency.................................................................1, 5 or 10 MHz, 0.1 to 5 Vpp or TTL, BNCReference Pulse .........................................................................1 Hz, TTL, BNC, evaluates rising edgeGPS Antenna.............................................................................for integrated GPS receiver (option), activeGPS antenna, BNC, 50 Ω, remote feed 5 V DCTransmitter Protection FacilitiesASI input signal monitoring circuitReflection monitoring circuit (amplifier output)Amplifier and power supply monitoring circuitOvertemperature monitoring of power amplifierSmoke alarm (option )InterfacesRS-232 for data exchange with exciter (encoder front)RS-232 flash-up and diagnosis interface for exciter (encoder front) RS-232for data exchange with transmitter (CCU front)Remote ControlSerial RS-232 interfaceSerial RS-485 interface / BitBus to IEC/IEEE 864-1 (option) Serialinterface: NetLink (Ethernet 10baseT) (option)Parallel interface (option)](https://usermanual.wiki/Rohde-and-Schwarz/SV7000FLO/User-Guide-826405-Page-3.png)
![SV7000 series Transmitter FCC Certification Application Exhibit D25 July 2K7 Page 4DVB EncoderInput Signal .................................... MPEG2 transport streamCoding / Modulation....................... to EN 300744DVB Bandwidth............................. 6, 7 or 8 MHzConfiguration ofModulation Parameters ........ manually, via RS-232 or MIP (automatic switching)Input Monitoring ........................... signal present, TS synchronization, data rate of TS with stuffing offSFN Function ................................ to TS 101 191Delay Correction ………………….max. 1000 ms, automatic and manual setting for high- and low-prioritydata streamHierarchical Coding ....................... optional, on requestDigital Equalizer........................... digital group-delay equalization (optional) in the basebanddigital linearity equalization in the basebandsignal limiting to limit the crest factorSynthesizerFrequency....................................... Band III, IV, VStep Width ..................................... 1 HzConnection...................................... internal OCXO (10 MHz), internal GPS receiver (option) or externalI/Q Modulator............................... Direct modulation to obtain the output frequency (band III / IV / V),Band filter for band III / tracking filter for band I V / V ,monitoring and control of rms output powerInputsASI A 1/2 (LP) ............................... MPEG2, ASI, BNC, 75 Ω, input A or main and standby path for lowpriority data streamASI B 1/2 (HP)............................... MPEG2, ASI, BNC, 75 Ω, input B or main and standby path for high priority data streamReference Frequency...................... 1, 5 or 10 MHz, 0.1 to 5 Vpp or TTL, BNCReference Pulse .............................. 1 Hz, TTL, BNC, evaluates rising edgesTransmitter Family NV7000 General Specifications (continued)SV700 Exciter](https://usermanual.wiki/Rohde-and-Schwarz/SV7000FLO/User-Guide-826405-Page-4.png)
![SV7000 series Transmitter FCC Certification Application Exhibit D25 July 2K7 Page 5GPS Antenna .................................. for integrated GPS receiver (option), active GPS antenna BNC, 50 Ω,remote feed 5 V DC OutputsOutputRF................................................... DVB, bands III, IV or V, 13 dBm rms power, SMA, 50 Ω to output amplifierTest OutputsRF (50 Ω)...................................................DVB, band IV/V, 10 dBm rms power, SMA, 50 Ω to output amplifier10 MHz OCXO ..............................10 MHz, 0 dBm, SMA, 50 ΩI, Q.................................................. complex, analog baseband signals (real and imaginary components)0 dBm, SMA, 50 ΩSerial InterfacesRS-232............................................ on front of CCU, transmitter control via GUI (PC)9-contact sub-D, femaleRS-232............................................ on front of DVB encoder, service interface,modulator control via GUI (PC)9-contact sub-D, femaleRS-232............................................ on front of DVB encoder, service interface for software downloadto the exciter9-contact sub-D, femaleRS-232............................................ on front of synthesizer, service interface for PC control ofGPS receiver9-contact sub-D, femaleRS-485............................................ remote transmitter control, 9-contact sub-D, female,on transmitter topRS-232............................................ remote transmitter control , 9-contact sub-D, female,located on transmitter topParallel Interface (option)............... floating interface for messages and commandsSupported Modulation ParametersLength of Transport packet............. 188 or 204 bytesCoding and Modulation ................. to EN 300744 with the following parameters:IFFT Mode ..................................... 2k and 8kTransmitter Family NV7000 General Specifications (continued)SV700 Exciter](https://usermanual.wiki/Rohde-and-Schwarz/SV7000FLO/User-Guide-826405-Page-5.png)
![SV7000 series Transmitter FCC Certification Application Exhibit D25 July 2K7 Page 6Transmitter Family NV7000 General Specifications (continued)SV700 ExciterSupported Modulation Parameters (continued from previous page)Useful Symbol Period..................... 224 µs (2k) or 896 µs (8k)Modulation .................................... QPSK, 16QAM or 64QAMGuard Period................................... 1/4, 1/8, 1/16 or 1/32 of useful symbol periodInner Code Rate 1/2, 2/3, 3/4, 5/6 or 7/8Quality DataAmplitude Error (I/Q) .................... < 0.1%Quadrature Error.............................< 0.1°Carrier Suppression ........................> 60 dB referred to CWSNR ............................................... > 39 dBMER ..............................................> 39 dBPhase Jitter......................................< 0.1°Phase Noise:Frequency / Carrier Offset dBc/HzFrequency Stability......................... 10 E-7 / 3 monthsFrequency Response....................... < ±0.5 dB10 Hz > 70100 Hz > 901 kHz > 9310kHz > 103100kHz > 1181 MHz > 130](https://usermanual.wiki/Rohde-and-Schwarz/SV7000FLO/User-Guide-826405-Page-6.png)
![SV7000 series Transmitter FCC Certification Application Exhibit D25 July 2K7 Page 7Transmitter Family NV7000 Model Specific InformationGeneral Data ModelType: SV7100 SV7200 SV7300 SV7400 SV7600 UnitsNo. of Amplifiers (model VH620A2) 1 2 3 4 6 quanityOutput Power for DMQ-T (MediaFLO) 120 210 310 420 600 wattsMaximum Power Consumption(230 or 240-volt, single phase mains) 1,020 1,860 2,700 3,540 5,300 volt amperesRecommended Mains Circuit Rating(USA) 20 20 20 20 40 amperesHeat Dissipation into Room (maximumexpected) 0.9 1.7 2.4 3.1 4.7 kilowattsAir Volume 88 177 265 354 530 feet3/ minute2.5 5 7.5 10 15 meters3/ minuteRF output Connector (Other types AOR) type "N" 7/16 DIN 7/16 DIN 7/16 DIN 7/16 DINApproximate Weight (without packaging) 232 267 300 337 410 pounds105 121 137 153 185 kilogramsCabinet (42-unit Rack) Dimensions(Height) (Depth) (Width)78 3/8 x31 1/2 x23 inches1990 x800 x585 millimetersSpace (rack unit) RequirementsNetCCU 700 Control Interface Unit (2 RU) 2 2 2 2 2 rack unitsSV 700 Exciter (7 RU) 7 7 7 7 7 rack unitsVH620A2 Power Amplifier (3 RU) 3 6 9 12 18 rack unitsTotal 12 15 18 21 27 rack unitsWeight of the Amplifier VH620A2 35 pounds16 kilograms](https://usermanual.wiki/Rohde-and-Schwarz/SV7000FLO/User-Guide-826405-Page-7.png)