Rollei Mini Wi Fi Camcorder 1 Users Manual
Mini Wi-Fi Camcorder 1 - Operation Manual mini_WiFi_EN Free User Guide for Rollei Camcorder, Manual
2015-08-19
: Rollei Rollei-Mini-Wi-Fi-Camcorder-1-Users-Manual-794026 rollei-mini-wi-fi-camcorder-1-users-manual-794026 rollei pdf
Open the PDF directly: View PDF 
.
Page Count: 11
| Download | |
| Open PDF In Browser | View PDF |
Wireless Camcorder User Manual Names of Parts Record Button Mic Status Indicator Micro SD Card Slot Speaker Micro USB Port Strap Hook Video Mode Photo Mode Mode Button Direct Mode Cloud Mode Power Button Tripod Mount Clip Mount Magnet Mount Strap Mount English | 1 Getting Started Charging the Unit • Before initial use, fully charge the camera via the attached • power adapter or on your computer via USB. Note: The plug of the power adapter could be switched (European or UK Plug) • During charging, the status indicator flashes red. When the camera is fully charged the indicator turns off. Modes Navigation • Press Power button to turn on camera. • Press Mode button to switch among Video-Direct Mode, PhotoDirect Mode, and Cloud Mode. Camera Modes Insert micro SD card (sold separately). Video Mode • Press Mode button to select Video Mode. • Press Record button to shoot and press again to stop. Photo Mode • Press Mode button to select Photo Mode. • Press Record button to take pictures. Wireless Modes Before using wireless modes, install below applications: • Mobile app: Download [Unieye] from Google Play or Apple Store. • PC software: Install [PC APP] from camera (Windows)(page 6). Direct Mode Connecting camera to mobile or PC directly for remote controlling, live viewing, album managing, and camera setup. Cloud Mode Connecting camera to cloud server via access point (AP) or mobile hotspot for internet video or live monitoring. 2 | English Direct Mode (Intran Direct Mode (Local) For initial use, install [Unieye] app on mobile. Each camera has a unique Mobile / PC U2-xxxxxxxx) Camera ID. ( Password is not required for the initial use, however, it is advised to go to [Setup] in app to setup password after connected. Connect to Camera For iOS user: • Set camera to Direct Mode . • On mobile, go to [Settings] [Wi-Fi] Choose a camera. 3G connection will switch to WiFi within 1 min. • Run [Unieye]. • Press camera bar to start. For Android user: • Set camera to Direct Mode and wait until indicator turns steady green. • On mobile, activate WiFi. • Run [Unieye]. • Press camera bar to start. iOS: Android: Zoom In Zoom out Invert Image Two Way Voice • Tap to talk to the camera from mobile; tap again to allow the camera to talk back to mobile. Shoot Video Take Photo (SD card required) (SD card required) Loop Recording • Record and archive in 3 min interval Quad View • Press to enable Quad View (up to four cameras). • Tap [1] button to return to single view. Note:1. Move the camera further away from mobile when echo occurs. 2. Mobiles with low CPU clock speed may not have audio during streaming. English | 3 Cloud Mode (Internet) Cloud Mode (Internet) AP USTREAM Cloud AP AP Cloud Server 3G/4G Mobile / PC Mobile Hotspot Recommended Cloud Server for Access: USTREAM A live broadcasting social media. Before using Cloud Mode, it is required to set up cloud AP and cloud server on camera in Direct Mode: follow Step 1 ~ Step 4. Step 1: Setup Cloud AP On mobile, start the app and go to [Setup] [Cloud Settings] [Cloud AP]. Select a WiFi network from [AP List]; enter network password when prompted. If no preferred AP is found, press [Other...] from [AP List] Enter network name and password. Note: Mobile hotspot can be set as cloud AP. 4 | English Cloud Mode (Internet) Step 2: Setup Cloud Server • New user, press then enter email/username/password/confirm for auto-registration. Returning user, enter username/password only. • Press [Save to Camera]. Step 3: Connect Camera to Cloud Server • To connect to cloud server, choose one of the following: 1. In the app [Setup] page, press [Camera to Cloud]. 2. Exit the app. On camera, press the Mode button to switch to Cloud Mode . • While connecting, the indicator flashes orange rapidly (this process may take up to 4 minutes). • Indicator flashes green once the connection is established. If connection fails, the indicator flashes red and alerts user with beeping frequencies. For troubleshooting, run [Unieye] to view the cloud warning message or refer to cloud warning table on page 8. Step 4: View Live Video on Cloud Server • To view live video, choose one of the following: 1. Use mobile app: USTREAM is available in Google Play or Apple Store. 2. Visit website: http://www.ustream.tv • Then search for username and select "username's show" to watch live video through camera. Note: 1. Cloud service may change depending on their policy. 2. In some areas, mobile may not activate hotspot where there is no 3G/4G. 3. Experiencing delays while viewing live video may be due to high internet traffic. English | 5 PC Applications To use [Unieye] features on PC, install [PC APP] first. The [PC APP] has similar features and interface to [Unieye] for easy user experience. Installing [PC APP] from Camera • Connect the camera to PC via a USB cable. • [PC APP] AutoRun/AutoPlay activates. • If AutoRun/AutoPlay is not starting: Go to [My computer] and search [PC APP] for installation. • Once installed, unplug the camera from PC then run [PC APP]. [PC APP] Features • Press [View HD] or double-click the viewing window to maximize it into full screen. Double-click again to return to the [PC APP] interface. • To save videos or photos to PC: Go to [Album] Select videos or photos Press [Save to PC]. Mass Storage and Webcam Modes While camera is plugged in to PC, press Mode button on camera to switch between Mass Storage Mode (default) and Webcam Mode. The status indicator shows steady red in Mass Storage Mode and steady green in Webcam Mode (In Skype or QQ, select "UVC_WEBCAM"). 6 | English Camera Indication Condition Status Indicator Alert Recording Flashing green One time Loop Recording Flashing orange One time Charging Flashing red None Fully Charged No indication Two times Low Battery Flashing red every 5 sec. (Warning) Five times (Shutdown) Power Off No indication Two times Auto Power Off (5 mins idle) Flashing red Two times Memory Full SD Card Error Flashing red Three times Forced Shutdown Camera Hotkey Press and hold Power button for 5 sec. to turn off camera. Forced Default Settings Press and hold Mode and Record buttons for 5 sec. to restore default settings. Car Camcorder Press and hold Record button for 3 sec. to start loop recording and invert image. English | 7 Troubleshooting Situation Cause/Solution Camera cannot turn on Battery power is low. Recharge the battery. Camera is frozen Press Power button for 5 sec. to turn off. Press Power button twice to turn on. Camera cannot record No SD card or SD card is full. SD card cannot be recognized. Format SD card in [Unieye] or replace SD card. Camera not found Turn on camera, switch to Direct Mode. Press "Refresh" on mobile or PC to scan again. Forgot camera password Press both Mode and Record buttons for 5 sec. to reset. Cannot watch live view Move camera closer to mobile. Flickering segments on TV system setting (50Hz/60Hz) is incorrect. live view Cloud Warning: Alert One time Two times Cause/Solution Cannot connect to cloud AP or invalid network password. Camera not inside WiFi area or weak signal. Check AP settings or move camera closer to cloud AP. No internet or the cloud server is not accessible. Cannot log in cloud server via internet. Cloud service may be blocked by firewall. Cloud server username or password is incorrect. Refer in [Setup] for instructions. Three times to Username already taken. Create new account in [Unieye]. 8 | English Waterproof Housing Guide Placing the Camera into the Waterproof Housing Latch Arm 1. Slide [OPEN ] swtich to the right and hold its position, then lift up the latch arm to open the housing. Spring Button 2. Place the camera in the housing; camera's Record button must align with housing's spring button. Hinged Arm Backdoor 3. Hook hinged arm to the top of the backdoor, then push down the latch arm to snap into place. English | 9 License Statement The software used in this product is licensed subject to a license pursuant to the GNU – General Public License conditions. We expressly draw attention to the fact that under the GNU – General Public License conditions no liability is accepted. The starting point for the software is the software published online at http://sg-gpl.net/ The software listed there is licensed pursuant to the GNU – General Public License conditions. Device-related changes have been made to this software for the product in question. The source text of the software implemented in the product in question can be obtained in response to an enquiry sent to the e-mail address info@rollei.com In this instance your e-mail must contain details of what the relevant product is, the relevant serial number and documentary evidence of your commercial source of supply as well as documentary evidence of the date on which the product was purchased from the trade source of supply. We guarantee supply of the source text of the implemented software for a period of at least three years from date of purchase from the trade source of supply where the trade source of supply has sourced the product from us directly or via strictly trade-only dealers. 10 | English
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2014:10:08 15:08:43+08:00 Creator : Adobe Acrobat Pro 10.1.10 Modify Date : 2014:10:31 17:34:38+01:00 Title : Trapped : False XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:56:37 Metadata Date : 2014:10:31 17:34:38+01:00 Creator Tool : Adobe Acrobat Pro 10.1.10 Format : application/pdf Document ID : uuid:fc18f211-2ad0-47ff-b20b-2f1bd20f8620 Instance ID : uuid:6469f592-d8a2-1047-bf9a-58f103390cff Producer : Adobe Acrobat Pro 10.1.10 Page Count : 11EXIF Metadata provided by EXIF.tools