Rolling Code TXM0 remote control User Manual Manual of Txmulti for USA

Rolling Code Limited remote control Manual of Txmulti for USA

User Manual

remote controlMANUAL MODEL TXMULTI English – Programming Instructions 1. Locate the selector switch in the back of the remote. Use a paper clip or small object to pry up the rubber cover to expose the selector switch. 2. Set your selector switch for the desired manufacture. See Chart Below 3. The remote is ready to be used, please refer to your receiver’s user manual. Note: To programming BFT, MUTANCODE and ERREKA- Hidden button (beside the switches) will be necessary. Español – Instrucciones de programación. 1. Localice los DIP switches en la parte trasera del mando. Use un clip o un objeto pequeño para retirar la goma protectora que da acceso a los DIP switches. 2. Seleccione la combinación correspondiente de DIP switches de acuerdo a la marca deseada. Véase la tabla a continuación. 3. El mando está listo para usarse. Por favor, diríjase al manual de usuario de su receptor. Nota: Para BFT, MUTANCODE y ERREKA, será necesaria la utilización del Botón semilla (junto a los DIPS). Batt. Open
remote control TX MULTI Num DIP SWITCHES R/F Brand Marca Marque Original Comments Comentarios Commentaires 1 Rolling Code Compatible DEA (KING SISTEM) GENIE GENIE GREEN GENIE WOOD MIO TR-2 315 MHZ 2 Rolling Code Compatible BFT MITTO 315 MHZ NEED HIDDEN BUTTON 3 Rolling Code Compatible Genie 315 MHZ 4 Rolling Code Compatible FAAC XT 433 RC 315 Mhz Red LED LED rojo LED rouge 5 Fixed Code Compatible DITEC GOL4 GOL4C BIXLP2 315 Mhz
TX Multi 6 Encrypted Code Compatible NICE FLOR-S 315 MHZ 7 Fixed Code Compatible LIFTMASTER BILLIONCODE 315 MHZ 8 Encrypted Code Compatible Liftmaster Chamberlain Motorlift 700 Lobas Raynor Orion 315 MHZ 9 Encrypted Code Compatible Liftmaster Chamberlain Lobas 315 MHZ 10 Rolling code SOMMER 315 MHZ 11  Encrypted Code MARANTEC 315 MHZ TXMR315 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operationAny Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu