Roost RSW200 2.4 GHz Wi-Fi Module User Manual

Roost Inc. 2.4 GHz Wi-Fi Module Users Manual

Users Manual

Roost User Manual RSW-200 Transmitter Module User Guide Version: 2 Publication date: March 28, 2017 ©2017 Roost, Inc. All rights reserved. The Roost™ word mark and logo are trademarks of Roost, Inc. The Wi-Fi Certified Logo is a logo of Wi-Fi Alliance®. All other logos and trademarks are the property of their respective owners. See www.getroost.com/patents for a list of applicable patents and/or patent applications. No part of this publication may be stored, reproduced, transmitted or distributed, in whole or in part, in any manner, electronic or otherwise, whether or not for a charge or other or no consideration, without the prior written permission of Roost, Inc. Requests for permission to store, reproduce, transmit or distribute materials may be made to the following address: Roost, Inc. 955 Benecia Avenue Sunnyvale, CA 94085 support@getroost.com 1) Compatibility 2.4GHz Band ONLY 2) FCC Notice to OEM This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications to this unit not expressly approved by Roost, Inc. could void the user’s authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient the Roost Smart Monitor 2. Consult getroost.com/support for help Radiation Exposure Statement: This equipment complies with the FCC radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between radiator and your body. OEM Warning: The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number – FCC ID: 2AE5A-RSW200. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: 2AE5A-RSW200.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter

Navigation menu