Rosslare DR12C EM Card Desktop Reader User Manual A4 1 page
Rosslare Enterprises Ltd EM Card Desktop Reader A4 1 page
Rosslare >
Users Manual
DR-12C EM Card Desktop Reader User Manual 1. Introduction The DR-12C is an advanced EM Card Desktop Reader. It reads the EM card identification number and transmits it to connected access control software, such as Rosslare’s AxTraxNG™. Figure 1: DR-12C It has a slim and attractive design and is built for convenience and portability. With its USB computer interface, it is quick and easy to install and runs without any additional power source. Designed to sit safely on any desktop, the DR-12C is sturdily built, with surfacegripping rubber feet. 1.1 Features Reads EM Card ID Bi-Colored LED Supports USB 2.0 Standard (compatible with USB 1.1), meets the EIA Standard Driver supports the following Operating Systems: Windows 7 32- and 64-Bit, Windows Vista, and Vista 64-Bit, Windows XP and XP 64-Bit, Server 2003, XP and Server 2008, Windows XP Embedded, Windows CE 4.2, 5.0 and 6.0, Mac OS-X 2. Technical Specifications 2.1 Electrical Characteristics 2.2 Environmental Characteristics Operating Voltage Range 5 VDC (USB powered) Operating Environment Indoor use Standby Current 70 mA Operating Temperature Range 0°C to 63°C (32°F to 145°F) Max. Operation Current 90 mA Storage Temperature Range -20°C to 63°C (-4°F to 145°F) Supported Transponders EM Cards Relative Humidity Range 0 to 95% (non-condensing) Read Card Distance Up to 5 cm RF Modulation ASK 2.3 Operation Frequency 125 kHz Weight 130 g (4.6 oz) Output Format Wiegand 26-Bit Dimensions (L x W x H) 123 x 70 x 16.2 mm (4.9 x 2.8 x 0.6 in.) 3. Installing the USB Driver To download the driver, please refer to http://www.rosslaresecurity.com To install the driv er for all cables: 1. Go to http://www.rosslaresecurity.com. 2. Click Downloads in the Quick Links section. 3. In Document Types, select Driver and click Search. 4. Click the Download icon. 5. Double-click the installation file: CDM20824_Setup. After a few moments, a completion message appears and the window closes. 4. Enrolling Cards using AxTraxNG You must use the AxTraxNG software to enroll cards. Please refer to Appendix J in the AxTraxNG™ Software Installation and User Manual. Physical Characteristics This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The full ROSSLARE Limited Warranty Statement is available in the Quick Links section on the ROSSLARE website at www.rosslaresecurity.com. Rosslare considers any use of this product as agreement to the Warranty Terms even if you do not review them. Contact Information United States and Canada China Rosslare Security Products, Inc. Southlake, TX, USA Toll Free: +1-866-632-1101 Local: +1-817-305-0006 Fax: +1-817-305-0069 support.na@rosslaresecurity.com Rosslare Electronics (Shenzhen) Ltd. Shenzhen, China Tel: +86-755-8610-6842 Fax: +86-755-8610-6101 support.cn@rosslaresecurity.com Europe Rosslare Enterprises Ltd. Kowloon Bay, Hong Kong Tel: +852-2795-5630 Fax: +852-2795-1508 support.apac@rosslaresecurity.com Rosslare Israel Ltd. Rosh HaAyin, Israel Tel: +972-3-938-6838 Fax: +972-3-938-6830 support.eu@rosslaresecurity.com Latin America Rosslare Latin America Buenos Aires, Argentina Tel: +54-11-4001-3104 support.la@rosslaresecurity.com Asia Pacific, Middle East, Africa India Rosslare Electronics India Pvt Ltd. Tel/Fax: +91-20-40147830 Mobile: +91-9975768824 sales.in@rosslaresecurity.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Sam Goldberg Create Date : 2015:08:09 10:13:09+03:00 Modify Date : 2015:12:30 09:14:03+08:00 Product Name : Product Name Has XFA : No Tagged PDF : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2015:12:30 09:14:03+08:00 Creator Tool : Acrobat PDFMaker 10.0 for Word Document ID : uuid:6ba9586a-f35e-4df5-9415-ceeb872d43f8 Instance ID : uuid:14f6b541-ed1a-4209-a5d9-bd3aaf50f350 Subject : 34 Format : application/pdf Title : A4 1-page Creator : Sam Goldberg Producer : Adobe PDF Library 10.0 Source Modified : D:20150809071304 Company : SYO Product 0020 Name : Product Name Page Layout : OneColumn Page Count : 2EXIF Metadata provided by EXIF.tools