Rosslare DR6255 HF CSN Desktop Reader User Manual A4 1 page

Download:
Mirror Download [FCC.gov]
Document ID	3248753
Application ID	Zmddk+j/xiVxntgRLeaA7A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	19.67kB (245824 bits)
Date Submitted	2017-01-05 00:00:00
Date Available	2017-01-05 00:00:00
Creation Date	2015-10-19 09:47:46
Producing Software	Adobe PDF Library 10.0
Document Lastmod	2015-12-30 10:05:01
Document Title	A4 1-page
Document Creator	Acrobat PDFMaker 10.0 for Word
Document Author:	Sam Goldberg

DR-6255
HF CSN Desktop Reader
User Manual
1. Introduction
Figure 1: DR-6255
The DR‐6255 is an HF CSN Desktop Reader. It reads the HF Card
Identification Number and transmits it to connected access control
software, such as Rosslare’s AxTraxNG™.
It has a slim and attractive design and is built for convenience and
portability. With its USB computer interface, it is quick and easy to
install and runs without any additional power source. Designed to sit
safely on any desktop, the DR-6255 is sturdily built, with surfacegripping rubber feet.
1.1

Features
Reads HF Serial number (CSN)
ISO14443A, ISO14443B, ISO15695, ISO18092 NFC Tag Card,
TOPAZ, FeliCal

Bi-Colored LED

Supports USB 2.0 Standard (compatible with USB 1.1), meets the
EIA Standard

Driver supports the following Operating Systems:
Windows 7 32- and 64-Bit, Windows XP 32- and XP 64-Bit,
Windows 8 32- and 64-Bit

2. Technical Specifications
2.1
Electrical Characteristics
2.2
Environmental Characteristics
6B
Operating Voltage Range
5 VDC (USB powered)
Operating Environment
Indoor use
Standby Current
90 mA
Operating Temperature Range
0°C to 63°C (32°F to 145°F)
Max. Operation Current
130 mA
Storage Temperature Range
-20°C to 63°C (-4°F to 145°F)
Supported Transponders
•
ISO 14443A/B
•
Relative Humidity Range
0 to 95% (non-condensing)
ISO 15693
•
ISO 18092
2.3
•
FeliCa
Weight
130 g (4.6 oz)
Dimensions (L x W x H)
123 x 70 x 16.2 mm (4.9 x 2.8 x 0.6 in.)
Read Card Distance
Up to 5 cm (10 in.)
RF Modulation
ASK
Operation Frequency
13.56 MHz
Bit Rate
106 kHz
Output Formats
Wiegand 26-Bit (default)
Note:
Wiegand 32-Bit, 34-Bit, and 40Bit also supported, but must be
pre-programmed by the factory
upon request.
3. Installing the USB Driver
2B
To download the driver, please refer to
http://www.rosslaresecurity.com
To install the driv er for all cables:
1. Go to http://www.rosslaresecurity.com.
2. Click Downloads in the Quick Links section.
3. In Document Types, select Driver and click Search.
4. Click the Download icon.
5. Double-click the installation file: CDM20824_Setup.
After a few moments, a completion message appears and the
window closes.
4. Enrolling Cards using AxTraxNG
3B
You must use the AxTraxNG software to enroll cards.
Please refer to Appendix J in the AxTraxNG™ Software Installation and
User Manual.
Physical Characteristics
7B
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The full ROSSLARE Limited Warranty Statement is available in the Quick
Links section on the ROSSLARE website at www.rosslaresecurity.com.
Rosslare considers any use of this product as agreement to the
Warranty Terms even if you do not review them.
Contact Information
United States and Canada
China
Rosslare Security Products, Inc.
Southlake, TX, USA
Toll Free: +1-866-632-1101
Local:
+1-817-305-0006
Fax:
+1-817-305-0069
support.na@rosslaresecurity.com
Rosslare Electronics (Shenzhen) Ltd.
Shenzhen, China
Tel: +86-755-8610-6842
Fax: +86-755-8610-6101
support.cn@rosslaresecurity.com
Europe
Rosslare Enterprises Ltd.
Kowloon Bay, Hong Kong
Tel: +852-2795-5630
Fax: +852-2795-1508
support.apac@rosslaresecurity.com
Rosslare Israel Ltd.
Rosh HaAyin, Israel
Tel: +972-3-938-6838
Fax: +972-3-938-6830
support.eu@rosslaresecurity.com
Latin America
Rosslare Latin America
Buenos Aires, Argentina
Tel: +54-11-4001-3104
support.la@rosslaresecurity.com
Asia Pacific, Middle East, Africa
India
Rosslare Electronics India Pvt Ltd.
Tel/Fax: +91-20-40147830
Mobile: +91-9975768824
sales.in@rosslaresecurity.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Sam Goldberg
Create Date                     : 2015:10:19 09:47:46+03:00
Modify Date                     : 2015:12:30 10:05:01+08:00
Product Name                    : Product Name
Has XFA                         : No
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2015:12:30 10:05:01+08:00
Creator Tool                    : Acrobat PDFMaker 10.0 for Word
Document ID                     : uuid:c6115b23-f1ef-406e-94a5-ea23b8e583e7
Instance ID                     : uuid:ecac4d0e-3a57-4c9c-afb2-47aa34f88ba8
Subject                         : 4
Format                          : application/pdf
Title                           : A4 1-page
Creator                         : Sam Goldberg
Producer                        : Adobe PDF Library 10.0
Source Modified                 : D:20151019064655
Company                         : SYO
Product 0020 Name               : Product Name
Page Layout                     : OneColumn
Page Count                      : 2

EXIF Metadata provided by EXIF.tools