Ruby Tech Gs 2116C Users Manual L2 Managed Switch Solutions ¦±

GS-2116C to the manual e3fd6ed8-07ab-4b8d-a4e5-7ba9a46aeef0

2015-02-06

: Ruby-Tech Ruby-Tech-Gs-2116C-Users-Manual-525594 ruby-tech-gs-2116c-users-manual-525594 ruby-tech pdf

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadRuby-Tech Ruby-Tech-Gs-2116C-Users-Manual- L2 Managed Switch Solutions-¦±  Ruby-tech-gs-2116c-users-manual
Open PDF In BrowserView PDF
RUB TECH

R

Networking & Communications

Gigabit Switch
L2 Managed Switch

GS-2116C

Gigabit Switch

GS-2116C: 16-Port GbE L2 Managed Switch with 2 SFP Dual Media
Key Features
Standard compliance
---IEEE 802.3x Flow Control capability
---IEEE 802.1q VLAN
---IEEE 802.1p QoS
RoHS Compliance
Performance
Switching capacity
---16 Gigabit Ethernet ports with nonblocking wire speed performance
---8 K MAC addresses
---272KB on-chip frame buffer
---Supports Jumbo frame, up to 9K
---Broadcast/Multicast Storm
Suppression
---Port Mirroring
VLAN
---Port-base VLAN
---IEEE802.1q tag-base VLAN, up to 256
active VLANs
---Q-in-Q is an efficient method for
enabling Subscriber Aggregation.
VSM(Virtual Stacking Management)
---Up to 16 switches can be managed
via Single IP
----Virtual stacking, no extra stacking
hardware is required
----Distributed stacking, no physical
central wiring closet is needed
QoS
---Supports Layer 4 TCP/UDP port and
ToS classification
---Supports 802.1p QoS with two level
priority queue
---Supports priority in a Q-in-Q tag
Bandwidth Control
---Supports bandwidth rating per port
ingress and egress rate limit
1000Mbps with 1Mbps increment
Protocol
LACP
---Port trunking with 8 trunking groups
---up to 8 ports for each group
GVRP/GARP
---802.1q with GVRP/ GARP
Multicasting
---Supports IGMP snooping including
active and passive modes

Benefits
2 dual media ports for flexible fiber connection
Port 15, 16 dual media ports are provided for flexible fiber connection. You
can select to install optional SFP transceiver modules in these cages for
short, medium or long distance fiber backbone attachment. Use of the SFP
will disable their corresponding built-in 10/100/1000BASE-T connections.
QoS supports layer 4 classification
The switch supports not only Layer 2 802.1p Priority Queue control, but also
supports programmable higher layer classification and prioritization to enable
enhanced Quality of Service (QoS) support for real time applications based
on information taken from Layer 2 to Layer 4, such as VoIP.
Port Mirroring helps supervisor monitoring network
Port mirroring copies traffic from a specific port to a target port. This
mechanism helps track network errors or abnormal packet transmission
without interrupting the flow of data.
Q-in-Q VLAN for performance & security
The VLAN feature in the switch offers the benefits of both security and
performance. VLAN is used to isolate traffic between different users and thus
provides better security. Limiting the broadcast traffic to within the same
VLAN broadcast domain also enhances performance. Q-in-Q, the use of
double VLAN tags is an efficient method for enabling Subscriber Aggregation.
This is very useful in the MAN.
802.3ad Port Trunk for bandwidth aggregation
The Gigabit ports can be combined together to create a multi-link load-sharing
trunk. Up to 8 Gigabit ports can be set up per trunk for forwarding bandwidth
up to 16Gbps, all traffic is aggregated based on MAC addresses, thus
balancing the traffic load. The switch supports up to 8 trunking groups. Port
trunks are useful for switch-to-switch cascading, providing very high full-duplex
speeds.
802.1x Access Control improves network security
802.1x features enable user authentication for each network access attempt.
Port security features allow you to limit the number of MAC addresses per
port in order to control the number of stations for each port. Static MAC
addresses can be defined for each port to ensure only registered machines
are allowed to access. By enabling both of these features, you can establish
an access mechanism based on user and machine identities, as well as
control the number of access stations.
802.1D compatible & 802.1w rapid spanning tree
For mission critical environments with multiple switches supporting STP, you
can configure the switches with a redundant backup bridge path, so
transmission and reception of packets can be guaranteed in event of any
switch on the network.
Broadcast/Multicast Storm control
To limit too many broadcast/multicast flooding in the network, broadcast/
multicast storm control is used to restrict excess traffic. Threshold values are
available to control the rate limit for each port. Packets are discarded if the
count exceeds the configured upper threshold.

RUB TECH

R

Networking & Communications

Gigabit Switch
L2 Managed Switch

Gigabit Switch

STP/RSTP
---802.1d/1w/1s STP
Network Security
---802.1x access control
---Management Access Policy Control
(L2 ACL)
SNMPv1,v2c Network Management
RFC 1213 MIB (MIB-II)
---Interface MIB
---Address Translation MIB
---IP MIB
---ICMP MIB
---TCP MIB
---UDP MIB
---SNMP MIB
RFC 1757 RMON MIB
---Statistics Group 1
---History Group 2
---Alarm Group 3
---Event Group 9
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
Enterprise MIB

Overview
The GS-2116 is an L2 managed Gigabit
switch that supports SNMP, Web UI and
CLI management interface. It is equipped
with 16 Gigabit TP ports and 2 dual media
ports that accommodate optional 10/100/
1000Base-T or SFP modules. In addition,
the switch implements the QoS (Quality of
Service), Mac Filtering Policy, Port Mirror,
VLAN and full L2 protocol. It is suitable for
workgroups or WAN edge application.

Technical Specifications
LED Description:
LED
Color
Global POWER
Green
Global CPU
Green
Port
LINK/ACT Green
1-16
Port
1-16

10/100/
Green
1000Mbps /Amber

Port
15,16

SFP

Green

Function
-Lit when +5V power is coming up
-Blinks when CPU is active
-Lit when connection with remote device
is good
-Blinks when any traffic is present
-Lit Green when TP link on 1000Mbps
speed
-Lit Amber when TP link on 100Mbps
speed
-Off when 10Mbps or no link occurs
- Lit when SFP connection with remote
device is good
-Blinks when any traffic is present

Diagnostic LEDs:
System LED
10/100/1000M TP Port Per Port LED
Gigabit SFP Module LED

Power
Link/Act, 10/100/1000Mbps
SFP

Network Interface:
Configuration
10/100/1000Mbps TP Jack (RJ-45)
1000Mbps SFP Fiber Module

Connector
TP(RJ-45)
SFP

Port
1 to 16
15, 16

Cable and Maximum Length:
Feature
Detailed Description
TP
Cat. 5 UTP cable, up to 100m
1000Base-SX SC M-M
Up to 220/275/500/550m, which
depends on Multi-Mode Fiber type
1000Base-LX SC S-M
Single-Mode Fiber, up to10/30/50Km
1000Base-LX WDM SC S-M Single-Mode Single Fiber, Bidi 20Km
Hardware Specifications:
Feature
Voltage
Frequency
Consumption
Ambient Temperature
Humidity
Dimensions
Weight
Safety

Detailed Description
100~240 VAC
50~60 Hz
30W
0 to 40 C
5% to 90%
44(H) x 442(W) x 209(D) mm
2.86kg
UL
Complies with FCC Part 15 Class A & CE
Mark

Packing Information
Carton Dimensions (mm)
530x512x345

pcs/Carton

N.W (KG)

G.W (KG)

5

19

20

Ordering Information
GS-2116C

16-Port GbE L2 Managed Switch with 2 SFP Dual Media

Optional SFP Module
SFP.LC
1000Base-SX GE SFP Fiber Module,
LC Multi-Mode 850nm
SFP.LC.M2
1000Base-SX GE SFP Fiber Module,
LC Multi-Mode 1310nm 2km
Note: We recommend the SFP transceiver from the following vendors:
1. Ruby Tech Corporation
2. Agilient Technologies
3. AVAGO Technologies
4. Finisar Corporation

Ruby Tech Corp.
3F, No.1, Lane 50, Nan Kang Road, Sec.3, Taipei, Taiwan
TEL:886-2-2785-3961 FAX:886-2-2786-3012

http://www.rubytech.com.tw
E-mail rubytech@mail.rubytech.com.tw

Technical information listed is subject to change without prior notice. All brand names and trademarks are property of their respective owners.
Copyright c 2008 Ruby Tech Corp. All rights reserved.
2008-07.25 Version A



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2008:07:25 09:46:16Z
Creator Tool                    : CorelDRAW Version 9.397
Modify Date                     : 2008:07:25 09:47:04+08:00
Metadata Date                   : 2008:07:25 09:47:04+08:00
Format                          : application/pdf
Creator                         : vivian
Title                           : (1)L2 Managed Switch Solutions-¦±
Producer                        : Corel PDF Engine Version 9.397
Document ID                     : uuid:a7a4aa09-cbaf-40bb-9a64-1a10d80d4f7c
Instance ID                     : uuid:06be63c4-eca8-4b77-a90a-e6986abecaa6
Page Count                      : 2
Author                          : vivian
EXIF Metadata provided by EXIF.tools

Navigation menu