Ruckus Wireless C110 C110 Access Point User Manual

Ruckus Wireless, Inc. C110 Access Point

Contents

User Manual

Copyright © 2016 Ruckus Wireless, Inc. Page 1 of 4Published June 2016, Part Number 800-71062-001 Rev AC110 Dual Band 802.11ac Wall Plate Cable Modem Access PointQuick Setup GuideThis Quick Setup Guide provides step-by-step instructions on how to set up your Ruckus Wireless C110 Dual Band 802.11ac Wall Plate Cable Modem Access Point. After completing the steps described in this Guide, you will be able to access the C110 and begin providing wired and wireless network access to users. The C110 has many options: • Includes DOCSIS (or EuroDOCSIS) 3.0 cable modem• It can be mounted on a standard USA- or EU-style single-gang wall outlet box.• It has bottom cutouts for one or two bypass cables. The mounting bracket has locating hooks to keep the bypass cables aligned with the cutouts when attaching the C110 to the mounting base.• It can have a low-power (0.5W or less) customer-supplied USB device plugged in. THIS GUIDE IN OTHER LANGUAGES•请从以下网站获得该指南的简体中文版 https://support.ruckuswireless.com• Vous trouverez la version française de ce guide à l'adresse suivante https://support.ruckuswireless.com•こ の ガ イ ド の⽇本語版は https://support.ruckuswireless.com でご覧く ださい•이 가이드의 한국어 버전은 웹 사이트(https://support.ruckuswireless.com)에서 확인하시기 바랍니다• Veja a versão em português (Brasil) deste guia em https://support.ruckuswireless.com• Puede ver la versión en español (América Latina) de esta guía en https://support.ruckuswireless.comBEFORE YOU BEGINBefore deploying Ruckus Wireless products, please check for the latest software and the release documentation.• User Guides and Release Notes are available at http://support.ruckuswireless.com/documents• Software Upgrades are available athttp://support.ruckuswireless.com/software• Open Source information is available athttp://opensource.ruckuswireless.com• Software License and Limited Warranty are available at http://support.ruckuswireless.com/warrantyAbout Peripheral DevicesThe C110 can supply power to USB devices through its USB port on the bottom of the unit.• The USB port is intended for low-power devices such as BLE (Bluetooth low energy) beacons. The maximum power that the USB port can supply is 0.5W. PACKAGE CONTENTS• C110 Cable Modem Access Point• AC/DC power supply• Mounting bracket• Two 10mm M3x0.5 thread Torx flat head machine screws• Two 1” 6-32 thread Phillips pan head machine screws• Two 4” long cable ties• Product warranty statement• Regulatory flyer• Declaration of Conformity, if required•This Quick Setup GuideCONFIGURING THE C110 (OPTIONAL)Note: The C110 normally receives its latest AP and CM firmware and initial configuration settings from the cable modem termination system (CMTS) high speed data services equipment when it powers up; if this is the case, then skip the following steps and continue with Step 6: Attaching the Mounting Bracket to an Outlet Box.If the C110 does not receive its latest firmware and initial configuration settings from the CMTS equipment when the AP powers up, then continue with these procedures:•Step 1: Collecting Tools and Setup Requirements•Step 2: Connecting the Computer to the C110•Step 3: Preparing Your Computer for C110 Setup•Step 4: Logging Into the C110 Access Point•Step 5: Customizing the Wireless SettingsSTEP 1: COLLECTING TOOLS AND SETUP REQUIREMENTS• No. 2 Phillips screwdriver and T10 Torx driver for the mounting bracket screws• A standard USA- or EU-style single-gang wall outlet box• Coaxial cable for backhaul• A computer with an Ethernet port, wireless card and a web browser• Cat 5e or better Ethernet cable (for initial software configuration)STEP 2: CONNECTING THE COMPUTER TO THE C110Figure 1: Front view1After removing your C110 from its package, place it next to your computer.2Using an Ethernet cable, connect your computer’s net-work port to either of the Ethernet ports on the bottom of the C110. 3Using an AC adapter (included), connect the C110 12VDC port to a protected power source. Figure 2: Rear and bottom viewNOTE: The C110 requires a minimum firmware revision of SmartZone 3.4 or later to operate.

Navigation menu