Ruckus Wireless H510 H510 Access Point User Manual

Ruckus Wireless, Inc. H510 Access Point H500 Quick Setup Guide

a href="https://usermanual.wiki/Ruckus-Wireless" itemprop="url"> Ruckus Wireless >

Contents

Users Manual

Copyright © 2016 Ruckus Wireless, Inc. Page 1 of 4Published April 2016, Part Number 800-71206-001 Rev AH510 Access PointQuick Setup GuideThis Quick Setup Guide provides step-by-step instructions on how to set up your Ruckus Wireless H510 Dual Band 802.11ac Multimedia Wi-Fi Access Point Wall Switch. After completing the steps described in this guide, you will be able to access the Wi-Fi Wall Switch and begin providing wired and wireless network access to users. The rest of this document refers to the H510 Access Point Wall Switch as the H510.The H510 has many options: • It can be mounted on a standard USA- or EU-style single-gang wall outlet box.• It can be powered by a customer-supplied IEEE 802.3af- or 802.3at-compliant PoE switch or injector, or can be powered by an optional customer-ordered DC power adapter.• It has side cutouts for one or two bypass cables. The mounting bracket has locating hooks to keep the bypass cables aligned with the cutouts when attaching the H510 to the mounting base.• It can have a low-power (0.5W or less) customer-supplied USB device plugged in. The USB device is very difficult to remove after the H510 is attached to the mounting base.ABOUT PERIPHERAL DEVICESThe H510 can supply power to USB devices and PoE-powered devices, and the power supplied depends on the PoE power supplied to the H510.• The USB port is intended for low-power devices such as BLE (Bluetooth low energy) beacons. The maximum power that the USB port can supply is 0.5W. •The LAN1+PoE port is intended for PoE-powered peripheral devices such as IP telephones.THIS GUIDE IN OTHER LANGUAGES•请从以下网站获得该指南的简体中文版 https://support.ruckuswireless.com• Vous trouverez la version française de ce guide à l'adresse suivante https://support.ruckuswireless.com•こ の ガ イ ド の⽇本語版は https://support.ruckuswireless.com でご覧く ださい•이 가이드의 한국어 버전은 웹 사이트(https://support.ruckuswireless.com)에서 확인하시기 바랍니다• Veja a versão em português (Brasil) deste guia em https://support.ruckuswireless.com• Puede ver la versión en español (América Latina) de esta guía en https://support.ruckuswireless.comBEFORE YOU BEGINBefore deploying Ruckus Wireless products, please check for the latest software and the release documentation.• User Guides and Release Notes are available at http://support.ruckuswireless.com/documents• Software Upgrades are available athttp://support.ruckuswireless.com/software• Open Source information is available athttp://opensource.ruckuswireless.com• Software License and Limited Warranty are available at http://support.ruckuswireless.com/warrantyPACKAGE CONTENTS• H510 Access Point Wall Switch• Mounting bracket• Two 6mm M3x0.5 thread Torx flat head machine screws• Two 1” 6-32 thread Phillips pan head machine screws• Product warranty statement• Regulatory flyer• Declaration of Conformity, if required•This Quick Setup GuideNote: The H510 requires Ruckus Wireless base image 104.0 firmware or later. Managed H510 deployments require SmartZone 3.4 or later, or ZoneFlex (ZF) 9.13.1 or later.H510 Power Options and Available Power Out for PoE Out and USBH510 Power Source Power Available for PoE Out and USB802.3af PoE 5W total802.3at PoE 12.95W PoE Out (802.3af Class 3) and 0.5W USBDC power adapter (sold separately)12.95W PoE Out (802.3af Class 3) and 0.5W USB
Copyright © 2016 Ruckus Wireless, Inc. Page 2 of 4Published April 2016, Part Number 800-71206-001 Rev ASTEP 1: COLLECTING TOOLS AND SETUP REQUIREMENTS• No. 2 Phillips screwdriver and T10 Torx driver for the mounting bracket screws• A standard USA- or EU-style single-gang wall outlet box• One of the following:• Customer-supplied IEEE 802.3af/at-compliant PoE switch and customer-supplied Ethernet cable• Customer-supplied IEEE 802.3af/at-compliant PoE injector and customer-supplied Ethernet cable• Customer-ordered DC power adapter (Ruckus part number 902-0170-XX10, sold separately)• An Ethernet cable with or without PoE run through the wall from your LAN through the wall outlet box• A computer with an Ethernet port and a wireless card with customer-supplied Cat 5e or better Ethernet cable• (optional) One or two separate bypass cables run through the outlet boxSTEP 2: CONNECTING THE COMPUTER TO THE H510Figure 1: Front view1After removing your H510 from its package, place it next to your computer.2Using an Ethernet cable, connect your computer’s network port to the PoE In port on the rear of the H510. 3Using an AC adapter (sold separately), connect the H510 48VDC port to a protected power source. Alternatively, connect the PoE In port to a PoE injector or PoE switch for both power and network connections.4Verify that the PWR LED on the rear of the enclosure is a steady green.Figure 2: Rear and bottom viewSTEP 3: PREPARING YOUR COMPUTER FOR H510 SETUP1On your Windows 7 computer, configure your network adapter from the Local Area Connection settings as follows:• Start > Control Panel > Network and Sharing Center > Change Adapter Settings2Edit the TCP/IPv4 address settings as follows: • Local Area Connection > Properties > Internet Protocol Version 4 (TCP/IPv4) > PropertiesThe Internet Protocol Version 4 (TCP/IPv4) Properties dialog box appears.3Select Use the following IP address (if it is not already selected) and then make the following entries:•IP address: 192.168.0.22 (or any available address in the 192.168.0.x network, except 192.168.0.1)•Subnet mask: 255.255.255.0•Default gateway: 192.168.0.1Leave the DNS server fields empty.4Click OK to save your changes.Your changes are put into effect immediately. Note: The following procedures assume that Windows 7 is the operating system. Procedures for other OS’s are similar.Important! Write down all of the currently active settings so you can restore your computer to its current configuration later, when this process is complete.
Download:
Mirror Download [FCC.gov]
Document ID3074207
Application IDWAxcKB5KAnnsynLFSGOaTQ==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize29.87kB (373326 bits)
Date Submitted2016-07-22 00:00:00
Date Available2016-09-05 00:00:00
Creation Date2007-02-21 14:03:02
Producing SoftwareAcrobat Distiller 11.0 (Windows)
Document Lastmod2016-04-27 11:21:43
Document TitleH500 Quick Setup Guide
Document CreatorFrameMaker 11.0.2
Document Author: Ruckus Wireless, Inc.
FCC ID Filing: S9GH510

Navigation menu