Ruckus Wireless MM2225 Wireless 802.11 b/g Router User Manual MM2211 Quick Start

Download:
Mirror Download [FCC.gov]
Document ID	667677
Application ID	WeDajJVdlDPC93BZxPsJAQ==
Document Description	Users Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	19.36kB (242008 bits)
Date Submitted	2006-06-12 00:00:00
Date Available	2006-06-08 00:00:00
Creation Date	2006-03-03 09:53:14
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2006-04-17 16:23:41
Document Title	MM2211-Quick-Start.fm
Document Creator	FrameMaker 7.0
Document Author:	Administrator

Manually Configure an IP Address
on Your Computer
1.
Remove the Ruckus MM2211 Metro Broadband Gateway gateway from the packaging and place it next to
your computer.
1.
For Windows 2000: Select Start->Settings->Network
and choose Dialup Connections
2.
2.
For Windows XP: Select Start->Settings->Control
Panel-> Network Connections
Connect the AC power supply to the Ruckus MM2211
gateway and plug the other end into a power outlet or
to a surge protector that is plugged into a power outlet.
3.
Double-click the icon for the Local Area Connection
designated for your home network. This is not the
same icon as your home wireless network.
3.
Connect the CAT5 Ethernet cable to the Ethernet port
on your computer, and to the Ethernet port on the
Ruckus MM2211 Metro Broadband Gateway.
4.
In the Local Area Connection Properties window, select
Internet Protocol (TCP/IP) and click Properties.
4.
On your PC, open a browser window. Enter the
address http://192.168.1.1.
5.
When the login screen appears, enter the username
admin and leave the password field blank. Then click
the Login button.
6.
In the Configuration->Wireless menu, you may change
the default wireless network Name (SSID) name for this
device to match the SSID of the AP you intend to connect to.
•Ruckus MM2211 Metro Broadband Gateway Quick Setup
Guide (this document)
7.
Refer to the information provided under the Help button before attempting to change any other default settings in this screen.
Understand the Default Network
Settings
8.
The initial configuration is now complete. Click
Reboot/Reset to make the change take effect.
Ruckus MM2211 Metro
Broadband Gateway Quick
Setup Guide
Packing list
•Ruckus MM2211 Metro Broadband Gateway (MM2211
Gateway)
•AC power adapter
•Category 5 (CAT5) Ethernet cable
Troubleshooting
Default Settings
Network Name (SSID):
V54-WXYZ
Security:
Disabled
If you cannot connect to your Ruckus MM2211 Metro Broadband Gateway, perform the following steps:
If the startup sequence didn’t work, verify that the Network
name (SSID) and security settings on the Ruckus MM2211
Metro Broadband Gateway match your wireless network.
1. Connect your computer to the Ruckus MM2211 Metro
Broadband Gateway by an Ethernet cable. Set your
computer’s network to get an IP address automatically.
IP Address
• The default IP address of the Ruckus MM2211 is
192.168.1.1.
• The Subnet Mask address is 255.255.255.0
• To gain administrative control of the MM2211, you must
set your computer’s network IP address to obtain an IP
address automatically.
Proceed to the next section for instructions on configuring
your IP address.
5.
Select Obtain an IP address automatically, and click
OK to exit the TCP/IP Properties window.
6.
Click OK to exit the Local Area Connection Properties
window.
Connect and Configure Your
Ruckus MM2211 Gateway
The following steps will guide you to set up and gain administrative access to your Ruckus MM2211 Metro Broadband
Gateway.
2.
Open a Web browser window.
3.
Point your browser to http://192.168.1.1. At the login
screen, enter the username admin and leave password
field blank. Click Login.
4.
Click the System link under the Configuration menu on
the left panel of the Ruckus Web user interface. Verify
that the Ruckus MM2211 Metro Broadband Gateway’s
wireless settings match those of your remote AP.
Check the LED status lights to verify correct operation.
1. Make sure you are using the power adapter supplied
by Ruckus Wireless.
2.
3.
Make sure the Power LED is lit. If it is not lit, make sure
that the power cord is properly connected to the
Ruckus MM2211 Metro Broadband Gateway, and that
the power supply adapter is properly connected to a
functioning power outlet. If the error persists, you have
a hardware problem and should contact technical support.
Make sure your Network LED is lit. Make sure that the
Ethernet cable connections are secure at the Ruckus
MM2211 Metro Broadband Gateway and your computer. The LAN LED on the Ruckus MM2211 Metro
Broadband Gateway indicates link when the gateway is
fully seated in the port.
4.
Make sure the Wireless LED is either steady or flashing
Green. If not lit, the Wireless settings may be incorrect
between the Ruckus MM2211 Metro Broadband Gateway and your computer.
can connect to the Ruckus MM2211 Metro Broadband Gateway using the default network settings.
If necessary, reset the Ruckus MM2211 Metro Broadband
Gateway gateway to its factory defaults
If you forgot which security settings you assigned to the
Ruckus MM2211 Metro Broadband Gateway, you can reset it
to factory defaults by inserting the end of a paper clip into
the reset button hole located on the back of the unit.
Press and hold the reset button for at least eight seconds,
until all Dome LEDs start to flash simultaneously. Then you
LED Information

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Mode                       : UseOutlines
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2006:03:03 09:53:14Z
Creator Tool                    : FrameMaker 7.0
Modify Date                     : 2006:04:17 16:23:41Z
Format                          : application/pdf
Creator                         : Administrator
Title                           : MM2211-Quick-Start.fm
Document ID                     : uuid:4111b09e-de3a-44eb-9d85-407d1d3ab0cc
Instance ID                     : uuid:24c4c2a3-2b44-4484-bdba-96ad73260e36
Page Count                      : 2
Author                          : Administrator

EXIF Metadata provided by EXIF.tools