Ruckus Wireless VX211X Wireless 802.11b/g USB Adaptor (2.4GHz) User Manual Ruckus VX2110

User Manual

VX2110 User Manual

Ruckus Wireless, Inc.

880 W. Maude Ave.

Sunnyvale, CA 94085

1.0 Introduction

The Ruckus Wireless VX2110 is an 802.11b/g wireless module operating in

the 2.4 GHz band. It is designed to operate as a slave device to a USB host

processor, and is compatible with the USB 1.1 and 2.0 specifications.

2.0 User Information

Changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment (per

FCC Part 15.21).

3.0 RF Exposure

As a mobile and fixed RF device, this device must have at least 20cm

separation from the user.

4.0 Operation

Plug the mini-B plug into the VX2110. Then plug the other end of the USB

cable into the host. The LED on the VX2110 will light indicating that the

driver is loaded and the device has power. The remaining steps in setting up

the mode of operation will depend on the type of host operating system used

and the application software.