Ruckus Wireless ZF7055 ZoneFlex 7055 Access Point User Manual Ruckus Wireless AP ZF2942 7942 Quick Setup Guide

Download:
Mirror Download [FCC.gov]
Document ID	1903277
Application ID	HevcVc4bwiilWE80mdkETw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.41kB (192676 bits)
Date Submitted	2013-02-20 00:00:00
Date Available	2013-03-30 00:00:00
Creation Date	2007-02-21 14:03:02
Producing Software	Acrobat Distiller 10.1.4 (Windows)
Document Lastmod	2012-11-28 09:49:37
Document Title	Ruckus Wireless AP ZF2942/7942 Quick Setup Guide
Document Creator	FrameMaker 10.0.2
Document Author:	Ruckus Wireless

•
•
An IEEE 802.3af/at-compliant PoE injector.
An optional DC power adapter (Ruckus part #9020170-XX10, sold separately)
WARNING!
ZoneFlex 7055
Dual-Band Multimedia Wi-Fi
Wall Switch
Quick Setup Guide
This Quick Setup Guide provides step-by-step instructions
on how to set up your Ruckus Wireless ZoneFlex 7055
Multimedia Wi-Fi Wall Switch. After completing the steps
described in this Guide, you will be able to access the Wi-Fi
Wall Switch and begin providing wired and wireless network
access to users.
DO NOT connect a PoE injector to any of the four front
ports, as this can seriously damage the device. PoE in
power supply should only be connected to the PoE In
LAN/Uplink port on the rear of the device.
IMPORTANT!
Write down all of the currently active settings so you can
restore your computer to its original configuration later
(when this process is complete).
Select Use the following IP address option (if it is not
already selected), and then make the following entries:
•
IMPORTANT!
If the AP is deployed with ZoneDirector, follow the
ZoneDirector Quick Setup Guide, and connect the AP to
your Ethernet network.
IP address: 192.168.0.22 (or any address in the
192.168.0.x network--other than 192.168.0.1, which is
in use by the AP)
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.1
Leave the DNS server fields empty.
•
•
Click OK to save your changes, and exit the TCP/IP Properties dialog box, and the Local Area Connection Properties dialog box. Your changes are put into effect
immediately.
BEFORE YOU BEGIN
STEP 2: CONNECT THE AP TO YOUR COMPUTER
Before deploying Ruckus Wireless products, please check for
the latest software and the release documentation.
Remove the AP from its packaging and place it near your
computer.
•
Release Notes and User Guides are available at
•
Software Upgrades are available at
http://support.ruckuswireless.com/software.
Connect one end of an Ethernet cable to the PoE In
LAN 5/Uplink port on the rear of the AP, and connect
the other end to a PoE switch or the Power Out port on
the PoE injector.
•
Open Source information is available at
•
http://support.ruckuswireless.com/documents.
If PoE power is not available, the AP can be powered
using an optional DC power adapter (Ruckus part
#902-0170-XX10, sold separately)
Using another Ethernet cable, connect one end to your
computer’s network port, and connect the other end to
another port on the PoE switch or to the Data In/Network port on the PoE injector.
Provide power to the PoE injector/switch.
Verify that the PWR LED is steady green.
http://opensource.ruckuswireless.com/.
•
Product Warranty/Software License Agreement:
http://support.ruckuswireless.com/
PACKAGE CONTENTS
STEP 1: PREPARE YOUR COMPUTER
SETUP
FOR
AP
•
ZoneFlex 7055 Wi-Fi Wall Switch (Access Point)
NOTE:
•
Mounting bracket
•
(2) Low-profile Phillips head mounting screws
The following instructions assume Windows 7 as the
operating system. Procedures for other OS’s are similar.
•
(2) Torx bracket screws
•
Regulatory flyer
•
This Quick Setup Guide
Start > Control Panel > Network and Sharing Center > Change Adapter Settings
SETUP REQUIREMENTS
•
A Phillips screwdriver
•
A T10 Torx screwdriver
•
A notebook with an Ethernet port and a wireless card.
•
A standard US or EU-style wall outlet box, with an Ethernet
cable run through the wall from your LAN to the outlet box.
•
One of the following:
•
An IEEE 802.3af/at-compliant PoE switch.
On your Windows 7 computer, open the Network Connections (or Network and Dial-up Connections) control
panel:
When the Network Connections window appears, rightclick the icon for Local Area Connection, and then
select Properties.
When the Local Area Connection Properties dialog box
appears, select Internet Protocol Version 4 (TCP/
IPv4) from the scrolling list, and then click Properties.
The TCP/IP Properties dialog box appears.
Copyright © 2012 Ruckus Wireless, Inc.
Published November 2012, Part Number 800-70432-001
NOTE:
If PoE is not available, the 7055 can be powered by
Ruckus Wireless power adapter (part number 902-0170xx10).
STEP 3: LOG INTO THE AP
Open a Web browser window. and enter this URL to connect to the AP:
https://192.168.0.1
2
When the Ruckus Wireless Admin login page appears,
enter the following:
Username: super
• Password: sp-admin
Click Login.
•
style outlet boxes conforming to NEMA-WD6, and EUstyle outlet boxes conforming to BS 4662.
Press  to initiate the connection. When a security
alert dialog box appears, click OK/Yes to proceed.
STEP 4: CUSTOMIZE
THE
On the Web interface menu, click Configuration >
Wireless [2.4G/5G]. The Configure :: Wireless :: Common options appear.
Verify that the following options are active:
•
The ZoneFlex 7055 comes with a bracket for a single 1gang electrical outlet box. For adjacent outlet boxes, use
the optional Ruckus Wireless ZF7055 adjacent wall bracket
kit (part number 902-0111-000).
Channel: SmartSelect
Country Code: If you are not located in the United
States, select your current country.
Click Update Settings if you made any changes.
Click any of the eight “Wireless #” tabs at the top of the
page.
In Wireless Availability, click Enabled.
Delete the text in the SSID field and enter a name for the
wireless network that will help your users identify the AP
in their wireless network connection application.
Click Update Settings to save your changes.
Repeat Steps 4-7 for each Wireless # interface that you
want to enable.
Click Logout to exit the Ruckus Web Admin interface.
10 When the Web Admin login page reappears, you can
exit your browser.
11 Disconnect the AP from the computer and from the current power source, and then restore your computer’s
original network settings.
STEP 5: MOUNT THE AP TO THE OUTLET BOX
IMPORTANT: The AP and all interconnected equipment
must be installed indoors within the same building, including the PoE powered network connection as described by
Environment A of the 802.3af standard.
IMPORTANT: Ensure that you use a Cat5e or better Ether-
Remove the outlet box cover from the outlet box,
retaining the original box cover screws.
• Align the mounting bracket with the outlet box so
that the screw holes line up (the bracket provides
multiple holes for different outlet box designs), and
pull the Ethernet cable through the center of the
mounting bracket.
• Affix the mounting bracket to the outlet box using
the original outlet box cover screws. If the original
outlet box screw heads extend over 2mm from the
bracket, then use the enclosed low profile mounting
screws instead.
• Run the required cables through the electrical outlet
box allowing sufficient slack for the cables to reach
the not yet installed ZoneFlex 7055.
Connect the cables.
•
•
•
Connect an Ethernet cable providing PoE power and
network connectivity to the PoE In LAN / Uplink port
using either a standard RJ45 connector or the 110
punch-down block. Do not connect both. (See
ZoneFlex Indoor Access Point User Guide for ZF 7055
110 punch-down block wiring details).
If PoE power is not available, the AP can be powered
using an optional DC power adapter (Ruckus part
#902-0170-XX10, sold separately)
If required, connect the cable providing support for
pass-through devices to the Pass Through port.
Prepare the electrical outlet box.
Mount the AP to the bracket.
•
•
Snap the AP onto the mounting bracket by hooking
the two locking tabs on the bottom of the bracket
into the slots on the bottom of the AP. Then push the
top of the AP in toward the wall until it snaps in
place.
Use the two Torx bracket screws provided to secure
the AP to the mounting bracket using a T10 Torx
screwdriver.
Torx bracket
screws
Pass Through
port
110
Punch-down
block
PoE In
LAN/Uplink
net cable to supply PoE power and LAN connectivity running to the outlet box where the AP will be installed.
The status LEDs are intentionally not visible once the 7055
is mounted. Complete any verification or troubleshooting
that requires visibility of the LEDs before mounting.
•
WIRELESS SETTINGS
•
NOTE:
NOTE:
Rear view
The ZoneFlex 7055 can be mounted to a variety of commonly used electrical outlet box formats, including US-
You have completed the physical installation.
Congratulations! Your wireless network is active and ready
for use.
FOR MORE INFORMATION
Refer to the ZoneFlex Indoor Access Point User Guide for
more detailed configuration and management information.
Copyright © 2012 Ruckus Wireless, Inc.
Published November 2012, Part Number 800-70432-001

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Language                        : en
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/10/03-12:08:50
Format                          : application/pdf
Title                           : Ruckus Wireless AP ZF2942/7942 Quick Setup Guide
Creator                         : Ruckus Wireless
Create Date                     : 2007:02:21 14:03:02Z
Creator Tool                    : FrameMaker 10.0.2
Modify Date                     : 2012:11:28 09:49:37+08:00
Metadata Date                   : 2012:11:28 09:49:37+08:00
Producer                        : Acrobat Distiller 10.1.4 (Windows)
Document ID                     : uuid:ed159fec-eb98-4316-b000-da52fc9454c4
Instance ID                     : uuid:517b0104-984b-4bbc-b839-550740194832
Page Mode                       : UseOutlines
Page Count                      : 2
Author                          : Ruckus Wireless

EXIF Metadata provided by EXIF.tools