Ruckus Wireless ZF7343 ZoneFlex 7343 Access Point User Manual Ruckus Wireless AP ZF2942 7942 Quick Setup Guide

Download:
Mirror Download [FCC.gov]
Document ID	1250998
Application ID	lRX5DEhH/WWwqtaIcR/9rA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	19.66kB (245697 bits)
Date Submitted	2010-03-11 00:00:00
Date Available	2010-03-11 00:00:00
Creation Date	2007-02-21 14:03:02
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2010-03-02 14:37:58
Document Title	Ruckus Wireless AP ZF2942/7942 Quick Setup Guide
Document Creator	FrameMaker 9.0
Document Author:	Ruckus Wireless

IMPORTANT!
If the AP is deployed with a ZoneDirector, follow the
ZoneDirector Quick Setup Guide, and connect the AP to
your Ethernet network.
ZoneFlex 7343/7363 802.11n
Indoor Access Point
Quick Setup Guide
This Quick Setup Guide provides step-by-step instructions on
how to set up your Ruckus Wireless ZoneFlex Access Point.
After completing the steps described in this Guide, you will be
able to place the Access Point (AP) at your site and provide
wireless network access to users.
STEP 1: CONNECT THE AP
TO
YOUR COMPUTER
After removing your Ruckus Wireless AP from its package,
place it next to your computer.
Temporarily disconnect your computer from any local network, if connected.
Using an Ethernet cable, connect your computer’s network
port to one of the three ports on the AP.
•
Release Notes are available at
•
User Guides are available at
•
Software Upgrades are available at
Open Source information is available at
•
One ZoneFlex 7343/7363 Access Point
•
One AC power adapter
•
One mounting template
•
This Quick Setup Guide
•
One Cat5 Ethernet cable
A computer with Windows 2000, XP or Vista installed
•
One or more of the following:
•
•
A modem (DSL or cable), E1/T1 router, or other device
provided by your Internet Service Provider, that brings
Web access to your site.
A network switch or a DSL/Internet gateway device.
After a minute, verify that the PWR LED on the external
enclosure is a steady green.
STEP 2: PREPARE YOUR COMPUTER
FOR
AP SETUP
Select Use the following IP address option (if it is not
already selected), and then make the following entries:
•
IP address: 192.168.0.22 (or any address in the
192.168.0.x network)
• Subnet mask: 255.255.255.0
• Default gateway: 192.168.0.1
• Preferred DNS server: 192.168.0.1
Leave the Alternate DNS server field empty.
Click OK to save your changes, exit first the TCP/IP Properties dialog box, and then the Local Area Connection
Properties dialog box.
As specified earlier, the AP should be directly connected to
your computer (through one of the LAN ports), and have been
powered on, ready for setup.
On your computer, open a Web browser window.
In the browser, type this URL to connect to the AP:
Press  to initiate the connection. When a security
alert dialog box appears, click OK/Yes to proceed.
When the Ruckus Wireless Admin login page appears,
enter the following:
https://192.168.0.1
On your Windows computer, open the Network Connections
(or Network and Dial-up Connections) control panel according
to how the Start menu is set up:
Start > Settings > Network Connections
Start > Control Panel > Network Connections
SETUP REQUIREMENTS
•
Using the AC adapter included in the package, connect
the AP to a convenient (and protected) power source.
Alternatively, connect the POE port to a PoE (Power over
Ethernet) switch for power and network connectivity.
http://support.ruckuswireless.com/open_source.
PACKAGE CONTENTS
STEP 3: LOG INTO THE AP
http://support.ruckuswireless.com/documents.
•
Write down all of the currently active settings so you can
restore your computer to its current configuration later
(when this process is complete).
Your changes are put into effect immediately.
http://support.ruckuswireless.com/documents.
http://support.ruckuswireless.com/software.
IMPORTANT!
Before deploying Ruckus Wireless products, please check for
the latest software and the release documentation.
•
The TCP/IP Properties dialog box appears.
7343/7363: (pictured below): 10/100/1000 PoE, or 10/
100 FE.
BEFORE YOU BEGIN
When the Local Area Connection Properties dialog box
appears, select Internet Protocol (TCP/IP) from the scrolling list, and then click Properties.
When the Network Connections window appears, rightclick the icon for Local Area Connection, and then click
select Properties.
IMPORTANT!
Make sure you do not open the Properties dialog box for
the wireless network.
Copyright © 2009 Ruckus Wireless, Inc.
Published September 2009, Part Number 800-70242-001 REV A
• Username: super
• Password: sp-admin
Click Login.
Default AP Settings (For Your Reference)
Network Names (SSIDs)
Wireless# (e.g., Wireless1)
Security (Encryption
method)
Disabled for each wireless
interface
Default Management IP
Address
192.168.0.1
STEP 6: PLACE
IF YOUR COMPUTER CANNOT CONNECT TO THE AP
•
Disconnect the AP from the power source, wait 5 seconds,
then reconnect it—and wait 60 seconds before attempting a
reconnection.
•
Disconnect and reconnect the AP and the computer.
•
Replace the Ethernet cable with a new one if the relevant
LAN port LED is not illuminated. (LEDs in each port light up
during a successful connection.)
STEP 4: CUSTOMIZE
THE
WIRELESS SETTINGS
NOTE:
If you anticipate logging into the AP regularly to perform
monitoring or maintenance (once it is in place), you may
want to consider assigning a static IP address to the AP.
In a default AP configuration, the AP uses a DHCP-assigned
IP address. Any post-installation connections require (1) a
reverse ARP lookup or (2) logging into the DHCP server, to
determine which IP address is in effect in the AP.
See the Ruckus Wireless Access Point User Guide for more
information on IP address assignment options and logging
into the AP through either a static IP or dynamic IP address.
•
On the Web interface menu, click Configuration > Wireless.
The Configure::Wireless::Common options appear.
•
Verify that the following options are active:
•
•
•
Wireless Mode: Auto-select
Channel: SmartSelect
Country Code: If you are not located in the United
States, select your current country.
OPTIONAL: IF YOU WANT TO SWITCH FROM DHCP
(DEFAULT)
A. On the menu, click Configuration > Internet.
B. Click the Static IP option.
C. Fill in the IP Address and Mask fields.
•
Disconnect the AP’s power adapter from the power outlet (or
disconnect the PoE cable).
Move the AP to its permanent location (accessible to both
AC power and network connections).
TIP
Follow these guidelines to maximize wireless signal
performance:
•
•
•
•
D. Click Update Settings to save your changes.
Place the AP as close to the center of the room, and away
from any physical obstructions, as possible.
Place the AP on a shelf or other elevated location where the
user’s wireless networking devices are in line-of-sight
access.
Avoid any sources of electromagnetic interference.
Avoid placing the AP near large metal or glass surfaces.
Use an Ethernet cable to connect the 10/100 or 10/100/
1000 port of the AP to the appropriate device:
•
•
The ISP’s modem or gateway device
The Ethernet switch that is connected to the ISP’s
device
If not using Power over Ethernet, connect the AP power
adapter to the AP, then to a convenient power source.
Click Logout to exit the Ruckus Web Admin interface.
When the Web Admin login page reappears, you can exit
your browser.
Verify that the following options are active:
10 Disconnect the AP from the computer and from the current power source, and then restore your computer to the
normal network connections.
•
•
•
STEP 5: RESTORE YOUR COMPUTER’S NETWORK
SETTINGS
STEP 7: VERIFY THE INSTALLATION
For dual band AP (ZoneFlex 7363):
•
AP IN YOUR SITE
Log in to the ZoneFlex Web interface.
For single band AP (ZoneFlex 7343):
THE
On the Web interface menu, click Configuration > Radio
2.4G or Configuration > Radio 5G.
Wireless Mode: Radio 2.4G or Radio 5G
Channel: SmartSelect
Country Code: If you are not located in the United
States, select your current country.
Click Update Settings if you made any changes.
Click any of the “Wireless #” tabs near the top of the
screen.
In Wireless Availability, click Enabled.
Delete the text in the SSID field, and then type the name
of your network. If your network does not have a “name”,
type a short name that will help your users identify the AP
in their wireless network connection application.
Click Update Settings to save your changes.
Repeat Steps 4-7 for each Wireless # interface that you
want to enable.
Verify that the Ethernet port LED is lit.
After a short pause to re-establish the Internet connection, you
can test the AP.
(If Windows 2000, click Start > Settings > Network and
Dial-up Connections.)
Using any wireless-enabled computer or mobile device,
search for and select the wireless network you’ve previously
configured.
When the Network Connections window appears, rightclick the icon for the “Local Area Connection” designated
for your home network and choose Properties.
If you can connect, open a browser and link to any public
Web site.
Congratulations! Your wireless network is active and ready for
use.
When the Local Area Connection Properties dialog box
appears, select Internet Protocol (TCP/IP) from the scrolling list, and click Properties.
FOR MORE INFORMATION
Click Start > Settings > Network Connections.
The TCP/IP Properties dialog box appears.
Replace the recent AP connection entries with the entries
from your standard network configuration.
Click OK to save your settings and exit first the TCP/IP
Properties dialog box, then the Local Area Connection
Properties dialog box.
Your computer is now ready for normal network use.
Copyright © 2009 Ruckus Wireless, Inc.
Published September 2009, Part Number 800-70242-001 REV A
You can now use the wireless network to log into the AP’s Web
interface. Use the Web interface to review and fine-tune a
wide range of AP settings.
For information on how to configure the AP from the Web
interface, refer to the online help.
Federal Communications Commission Notices
This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum
distance 20cm between the radiator and your body. This equipment shall not be colocated with any other transmitter.
Harmful Interference Notice
This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment or devices
•
Connect the equipment to an outlet other than the receiver's
•
Consult a dealer or an experienced radio/TV technician for assistance
•
Changes or modifications to this equipment that have not been approved by Ruckus Wireless may void the user's authority to operate this equipment.
Industry Canada Statement
This device complies with Industry Canada ICES-003 and RSS210 rules. Operation is subject to the following two conditions:
1. This device may not cause interference and
2. This device must accept any interference, including interference that may cause undesired operation of the device.
Cet appareil est conforme aux normes NMB003 et RSS210 d'Industrie Canada. Le fonctionnement est soumis aux conditions suivantes :
1. Ce périphérique ne doit pas causer d'interférences;
2. Ce périphérique doit accepter toutes les interférences reçues, y compris celles qui risquent d'entraîner un fonctionnement indésirable.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum
distance 20cm between the radiator & your body.
Australia Statement
This device complies with the ACMA requirements for a Wi-Fi device namely Radio Communications (Low Impact Potential Devices) Class Licence 2000 Amd. 1:2007 and
Radiocommunications (Compliance Labelling – Electromagnetic Radiation) Notice 2003. The equipment complies with the ACMA requirements for radiation exposure for a
"general user/non-aware user". This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This equipment
complies with the Australian safety requirements if connected to an approved power supply.
European Union Notices
This product only supplied by Limited Power sources (sub-clause 2.5 of standard EN 60950-1)
Compliance Information for 2.4-GHz and 5-GHZ Wireless Products
The following standards were applied during the assessment of the product against the requirements of the Directive 1999/5/EC:
Radio: EN 300 328, EN 301 893
•
EMC: EN 55022, EN 55024, EN 301 489-1, EN 301 489-17
•
Safety: EN 60950, EN 50385
•
The frequency band 5150 – 5350 MHz is restricted to indoor use.
National Restrictions
This product may be used in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below:
Ce produit peut être utilisé dans tous les pays de l’UE (et dans tous les pays ayant transposés la directive 1999/5/CE) sans aucune limitation, excepté pour les pays
mentionnés ci-dessous:
Questo prodotto è utilizzabile in tutte i paesi EU (ed in tutti gli altri paesi che seguono le direttive EU 1999/5/EC) senza nessuna limitazione, eccetto per i paesii menzionati
di seguito:
Das Produkt kann in allen EU Staaten ohne Einschränkungen eingesetzt werden (sowie in anderen Staaten die der EU Direktive 1999/5/CE folgen) mit Außnahme der
folgenden aufgeführten Staaten:
France
In case the product is used outdoors, the output power is restricted in some parts of the band. See the table below or check http://www.arcep.fr/ for more details.
Dans la cas d’une utilisation en extérieur, la puissance de sortie est limitée pour certaines parties de la bande. Reportezvous à la table 1 ou visitez http://www.arcep.fr/ pour
de plus amples détails.
Location
Indoor (No restrictions)
Outdoor
Frequency Range (MHz)
2400-2483.5
2400-2454 [2454-2483.5]
Power (EIRP)
100 mW (20 dBm)
100 mW (20 dBm) [10 mW(10 dBm)]
Italy
This product meets the National Radio Interface and the requirements specified in the National Frequency Allocation Table for Italy. Unless operating within the boundaries
of the owner’s property, the use of this 2.4 GHz Wireless LAN product requires a ‘general authorization’. Please check with http://www.comunicazioni.it/ for more details.
Questo prodotto è conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale di ripartizione delle frequenze in Italia. Se non viene installato
all’interno del proprio fondo, l’utilizzo di prodotti Wireless LAN a 2.4 GHz richiede una "Autorizzazione Generale". Consultare http://www.comunicazioni.it/ per maggiori
dettagli.
Belgium
The Belgian Institute for Postal Services and Telecommunications (BIPT) must be notified of any outdoor wireless link having a range exceeding 300 meters. Please check
http://www.bipt.be for more details.
Draadloze verbindingen voor buitengebruik en met een reikwijdte van meer dan 300 meter dienen aangemeld te worden bij het Belgisch Instituut voor postdiensten en
telecommunicatie (BIPT). Zie http://www.bipt.be voor meer gegevens.
Les liaisons sans fil pour une utilisation en extérieur d’une distance supérieure à 300 mètres doivent être notifiées à l’Institut Belge des services Postaux et des
Télécommunications (IBPT). Visitez http://www.ibpt.be pour de plus amples détails.
Taiwan Statement
The control, adjustment and on/off operation of this device does not violate the “Administrative regulations on low power radio waves radiated devices”. Any adjustments to
the device should be carried out or be monitored by a specialist who has expertise on radio frequency devices. Replacement of components which may lead to the violation
to the regulations is not allowed. Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power
or alter original characteristic as well as performance to an approved low power radio-frequency devices. The low power radio-frequency device shall not influence aircraft
security and interfere with legal communications; if found, the user shall cease operating immediately until no interference is achieved. The said legal communications
means radio communications is operated in compliance with the Telecommunications Act. The low power radio-frequency devices must not be susceptible with the
interference from legal communications or ISM radio wave radiated devices.
Ruckus Wireless tímto prohlašuje, že tento Radio LAN je ve shodě se základními požadavky a dalšími příslušnými
ustanoveními směrnice 1999/5/ES.
Dansk
[Danish]
Undertegnede Ruckus Wireless erklærer herved, at følgende udstyr Radio LAN overholder de væsentlige krav og øvrige
relevante krav i direktiv 1999/5/EF.
Deutsch
[German]
Hiermit erklärt Ruckus Wireless, dass sich das Gerät Radio LAN in Übereinstimmung mit den grundlegenden
Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Eesti
[Estonian]
Käesolevaga kinnitab Ruckus Wireless seadme Radio LAN vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud
direktiivist tulenevatele teistele asjakohastele sätetele.
English
Hereby, Ruckus Wireless declares that this Radio LAN is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
Español
[Spanish]
Por medio de la presente Ruckus Wireless declara que el Radio LAN cumple con los requisitos esenciales y cualesquiera
otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Ελληνική
[Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Ruckus Wireless ΔΗΛΩΝΕΙ ΟΤΙ Radio LAN ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ
ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Français
[French]
Par la présente Ruckus Wireless déclare que l'appareil Radio LAN est conforme aux exigences essentielles et aux autres
dispositions pertinentes de la directive 1999/5/CE.
Italiano
[Italian]
Con la presente Ruckus Wireless dichiara che questo Radio LAN è conforme ai requisiti essenziali ed alle altre
disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latviski
[Latvian]
Ar šo Ruckus Wireless deklarē, ka Radio LAN atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to
saistītajiem noteikumiem.
Lietuvių
[Lithuanian]
Šiuo Ruckus Wireless deklaruoja, kad šis Radio LAN atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos
nuostatas.
Nederlands
[Dutch]
Hierbij verklaart Ruckus Wireless dat het toestel Radio LAN in overeenstemming is met de essentiële eisen en de andere
relevante bepalingen van richtlijn 1999/5/EG.
Malti
[Maltese]
Hawnhekk, Ruckus Wireless, jiddikjara li dan Radio LAN jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn
relevanti li hemm fid-Dirrettiva 1999/5/EC.
Magyar
[Hungarian]
Alulírott, Ruckus Wireless nyilatkozom, hogy a Radio LAN megfelel a vonatkozó alapvetõ követelményeknek és az
1999/5/EC irányelv egyéb elõírásainak.
Polski
[Polish]
Niniejszym Ruckus Wireless oświadcza, że Radio LAN jest zgodny z zasadniczymi wymogami oraz pozostałymi
stosownymi postanowieniami Dyrektywy 1999/5/EC.
Português
[Portuguese]
Ruckus Wireless declara que este Radio LAN está conforme com os requisitos essenciais e outras disposições da
Directiva 1999/5/CE.
Slovensko
[Slovenian]
Ruckus Wireless izjavlja, da je ta Radio LAN v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive
1999/5/ES.
Slovensky
[Slovak]
Ruckus Wireless týmto vyhlasuje, že Radio LAN spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice
1999/5/ES.
Suomi
[Finnish]
Ruckus Wireless vakuuttaa täten että Radio LAN tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä
koskevien direktiivin muiden ehtojen mukainen.
Svenska
[Swedish]
Härmed intygar Ruckus Wireless att denna Radio LAN står I överensstämmelse med de väsentliga egenskapskrav och
övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Íslenska
[Icelandic]
Hér með lýsir Ruckus Wireless yfir því að Radio LAN er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í
tilskipun 1999/5/EC.
Norsk
[Norwegian]
Ruckus Wireless erklærer herved at utstyret Radio LAN er i samsvar med de grunnleggende krav og øvrige relevante
krav i direktiv 1999/5/EF.
800-70240-001-A
Česky
[Czech]

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Page Mode                       : UseOutlines
XMP Toolkit                     : 3.1-701
Creator Tool                    : FrameMaker 9.0
Modify Date                     : 2010:03:02 14:37:58+08:00
Create Date                     : 2007:02:21 14:03:02Z
Metadata Date                   : 2010:03:02 14:37:58+08:00
Format                          : application/pdf
Title                           : Ruckus Wireless AP ZF2942/7942 Quick Setup Guide
Creator                         : Ruckus Wireless
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:661fd981-fa61-49e3-bde9-01b57467f72f
Instance ID                     : uuid:26f7e1f9-aef8-4c2c-a15c-78fa2ef33d11
Page Count                      : 4
Author                          : Ruckus Wireless

EXIF Metadata provided by EXIF.tools