Ruckus Wireless ZF7351 DUAL-BAND 802.11a/b/g/n ACCESS POINT User Manual Ruckus Wireless AP ZF2942 7942 Quick Setup Guide

Download:
Mirror Download [FCC.gov]
Document ID	1899423
Application ID	vWZOifu57u1rGhbEri8lPQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	28.06kB (350759 bits)
Date Submitted	2013-02-13 00:00:00
Date Available	2013-02-13 00:00:00
Creation Date	2007-02-21 14:03:02
Producing Software	Acrobat Distiller 10.1.3 (Windows)
Document Lastmod	2012-06-06 02:35:32
Document Title	Ruckus Wireless AP ZF2942/7942 Quick Setup Guide
Document Creator	FrameMaker 10.0.2
Document Author:	Ruckus Wireless

The TCP/IPv4 Properties dialog box appears.
IMPORTANT!
If the AP is deployed with a ZoneDirector, follow the
ZoneDirector Quick Setup Guide, and connect the AP to
your local network.
ZoneFlex 7351-U 802.11n
Multimedia Wi-Fi Access Point
Quick Setup Guide
STEP 1: CONNECT THE AP
TO
YOUR COMPUTER
•
•
STEP 3: LOG INTO THE AP
As specified earlier, the AP should be directly connected to
your computer (through the Ethernet port) and powered on,
ready for setup.
ZoneFlex 7351-U Access Point
•
Mounting screws and anchors (2)
•
This Quick Setup Guide
SETUP REQUIREMENTS
•
A computer running Windows 7 (procedures for other OS’s
are similar)
•
One or more of the following:
•
•
A modem (DSL or cable), broadband router, or other
device provided by your Internet Service Provider
that brings Internet access to your site.
A network switch or a DSL/Internet gateway device.
•
Two Cat 5e Ethernet cables
•
An AC power adapter (sold separately)
On your computer, open a Web browser window.
In the browser, type this URL to connect to the AP:
After removing your Ruckus Wireless AP from its package, place it next to your computer.
Using an Ethernet cable, connect your computer’s network port to the 10/100/1000 port on the AP.
Using the AC adapter (sold separately), connect the AP
to a convenient power source.
Press  to initiate the connection. When a security
alert dialog box appears, click OK/Yes to proceed.
Verify that the Power LED on the external enclosure is a
steady green.
When the Ruckus Wireless Admin login page appears,
enter the following:
PACKAGE CONTENTS
•
Open Source information is available at
Software License and Limited Warranty available at
http://support.ruckuswireless.com/warranty.
Click OK to save your changes.
Your changes are put into effect immediately.
Software Upgrades are available at
http://opensource.ruckuswireless.com.
IP address: 192.168.0.22 (or any address in the
192.168.0.x network)
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.1
Leave the DNS server fields empty.
User Guides and Release Notes are available at
http://support.ruckuswireless.com/software.
Select Use the following IP address (if it is not already
selected) and then make the following entries:
•
Before deploying Ruckus Wireless products, please check for
the latest software and the release documentation.
•
•
BEFORE YOU BEGIN
http://support.ruckuswireless.com/documents.
Write down all of the currently active settings so you can
restore your computer to its current configuration later
(when this process is complete).
•
This Quick Setup Guide provides step-by-step instructions
on how to set up your Ruckus Wireless ZoneFlex Access
Point. After completing the steps described in this Guide,
you will be able to place the Access Point (AP) at your site
and provide wireless network access to users.
•
IMPORTANT!
STEP 2: PREPARE YOUR COMPUTER
SETUP
FOR
AP
https://192.168.0.1
Username: super
Password: sp-admin
Click Login.
•
•
NOTE:
STEP 4: CUSTOMIZE THE WIRELESS SETTINGS
The following procedures assume Windows 7 as the
operating system. Procedures for other OS’s are similar.
On the Web interface menu, click Configuration > Wireless [2.4G/5G]. The Configure :: Wireless :: Common
options appear.
Verify that the following options are active:
On your Windows 7 computer, configure your network
adapter from the Local Area Connection settings as follows:
•
•
Start > Control Panel > Network and Sharing
Center > Change Adapter Settings
•
States, select your current country.
Edit the TCP/IPv4 address settings as follows:
•
Local Area Connection > Properties > Internet
Protocol Version 4 (TCP/IPv4) > Properties
Copyright © 2012 Ruckus Wireless, Inc.
Published June 2012, Part Number 800-70393-001
Channel: SmartSelect
Country Code: If you are not located in the United
Click Update Settings if you made any changes.
Click any of the eight “Wireless #” tabs at the top of the
page.
In Wireless Availability, click Enabled.
6
Delete the text in the SSID field, and then type a name
for your network that will help your users identify the AP
in their wireless network connection application.
Click Update Settings to save your changes.
Repeat Steps 4-7 for each Wireless # interface that you
want to enable.
Click Logout to exit the Web interface.
Figure 1.
Figure 3.
Mounting holes
Dimples
Mounting slots
10 Disconnect the AP from the computer and from the current power source, and then restore your computer to its
original network connection configuration.
STEP 5: PLACE
THE
AP IN YOUR SITE
Move the AP to its permanent location (accessible to both
AC power and network connection).
Use an Ethernet cable to connect the 10/100/1000 port
of the AP to your network.
Connect the AC power adapter to the AP, then to a convenient power source.
Verify that the 10/100/1000 port LED is lit.
Slide the ZoneFlex 7351-U onto the mounting bracket so
that the bracket hooks engage the AP chassis (see Figure
2).
Photo Mount
Snap the photo mount stand into the slot on the AP chassis
as shown (Figure 4).
Figure 4.
Figure 2.
After a short pause to re-establish the Internet connection,
you can test the AP.
STEP 6: VERIFY THE INSTALLATION
Using any wireless-enabled computer or mobile device,
search for and select the wireless network you previously
configured.
If you can connect, open a browser and link to any public
Web site.
Congratulations! Your wireless network is active and ready
for use. If you need to configure advanced wireless settings,
such as enabling security, see the AP User Guide.
(OPTIONAL) MOUNTING INSTRUCTIONS
The ZoneFlex 7351-U can be mounted to a wall or ceiling
using an optional mounting bracket or book/photo mount
stand (mounting accessories sold separately).
ZoneFlex 7351-U Accessory Kit part number: 902-0104-0000.
Mounting to a Flat Surface
Lock the AP to the bracket using the supplied Torx screw.
You will need a T10 security Torx bit.
Book Mount
Slide the book mount stand onto the AP so that the stand
tabs enter the dimples on the AP chassis (see Figure 3).
Affix the mounting bracket to the mounting surface using
the mounting holes or slots (see Figure 1).
Copyright © 2012 Ruckus Wireless, Inc.
Published June 2012, Part Number 800-70393-001
FOR MORE INFORMATION
You can now use the wireless network to log into the AP’s
Web interface. Use the Web interface to review and finetune a wide range of AP settings. For information on how to
configure the AP from the Web interface, refer to the Ruckus
Wireless ZoneFlex Access Point User Guide or the Online
Help, available from within the Web interface.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Language                        : en
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/10/03-12:08:50
Format                          : application/pdf
Title                           : Ruckus Wireless AP ZF2942/7942 Quick Setup Guide
Creator                         : Ruckus Wireless
Create Date                     : 2007:02:21 14:03:02Z
Creator Tool                    : FrameMaker 10.0.2
Modify Date                     : 2012:06:06 02:35:32+08:00
Metadata Date                   : 2012:06:06 02:35:32+08:00
Producer                        : Acrobat Distiller 10.1.3 (Windows)
Document ID                     : uuid:e56ed679-0432-4ec9-8260-1a601d99bed9
Instance ID                     : uuid:82b0bb84-646e-4441-94d2-beba05187d5b
Page Mode                       : UseOutlines
Page Count                      : 2
Author                          : Ruckus Wireless

EXIF Metadata provided by EXIF.tools