Ruckus Wireless ZF7441 IEEE 802.11 a/b/g/n Access Point User Manual Ruckus Wireless AP ZF2942 7942 Quick Setup Guide

Download:
Mirror Download [FCC.gov]
Document ID	1991743
Application ID	BvyNrHT6RXIWnYa70kgG5g==
Document Description	Installation Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.76kB (271938 bits)
Date Submitted	2013-06-14 00:00:00
Date Available	2013-06-14 00:00:00
Creation Date	2017-10-27 01:09:16
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-27 01:09:16
Document Title	Ruckus Wireless AP ZF2942/7942 Quick Setup Guide
Document Creator	FrameMaker 10.0.2
Document Author:	Ruckus Wireless

ZoneFlex 7441 Dual Band
802.11n DAS Access Point
Quick Setup Guide
This Quick Setup Guide provides step-by-step instructions on
how to set up your Ruckus Wireless ZoneFlex Access Point. After
completing the steps described in this Guide, you will be able to
place the Access Point (AP) at your site and provide wireless
network access to users.
•
An Ethernet cable (Cat5e or better for PoE in)
•
An AC power adapter (sold separately), or
•
An 802.3af or 802.3at -compliant Power over Ethernet (PoE)
switch or PoE injector, or
•
AC/DC adapter 12V 1.5A (Ruckus part #902-0169-xx00, or
equivalent)
•
IMPORTANT!
If the AP is deployed with a ZoneDirector, follow the
ZoneDirector Quick Setup Guide, and connect the AP to your
local network.
The TCP/IPv4 Properties dialog box appears.
IMPORTANT!
Write down all of the currently active settings so you can
restore your computer to its current configuration later (when
this process is complete).
Select Use the following IP address (if it is not already
selected) and then make the following entries:
•
IP address: 192.168.0.22 (or any address in the
192.168.0.x network)
Subnet mask: 255.255.255.0
•
Default gateway: 192.168.0.1
•
STEP 1: CONNECT THE AP
TO
Local Area Connection > Properties > Internet
Protocol Version 4 (TCP/IPv4) > Properties
YOUR COMPUTER
Figure 1. ZoneFlex 7441 DAS Access Point
Leave the DNS server fields empty.
Click OK to save your changes.
Your changes are put into effect immediately.
BEFORE YOU BEGIN
STEP 3: LOG INTO THE AP
Before deploying Ruckus Wireless products, please check for the
latest software and the release documentation.
•
User Guides and Release Notes are available at
http://support.ruckuswireless.com/documents.
As specified earlier, the AP should be directly connected to your
computer (through the Ethernet port) and powered on, ready for
setup.
•
Software Upgrades are available at
On your computer, open a Web browser window.
http://support.ruckuswireless.com/software.
In the browser, type this URL to connect to the AP:
•
Open Source information is available at
http://opensource.ruckuswireless.com.
•
Software License and Limited Warranty available at
http://support.ruckuswireless.com/warranty.
PACKAGE CONTENTS
https://192.168.0.1
After removing your Ruckus Wireless AP from its package,
place it next to your computer.
Using an Ethernet cable, connect your computer’s network
port to the 10/100/1000 port on the AP.
Press  to initiate the connection. When a security
alert dialog box appears, click OK/Yes to proceed.
When the Ruckus Wireless Admin login page appears, enter
the following:
•
ZoneFlex 7441 Access Point
Using the AC adapter (sold separately), connect the AP to a
convenient (and protected) power source.
•
ZoneFlex 7441 Installation Guide
•
•
Mounting Brackets
•
Mounting accessory bag (DIN rail clip, 4 screws for mounting
ears, terminal ring for ground wire)
•
Regulatory flyer
•
Declaration of Conformity (country-dependent)
•
Product Warranty Statement
•
This Quick Setup Guide
SETUP REQUIREMENTS
•
A computer running Windows 7 (procedures for other OS’s
are similar)
•
One or more of the following:
•
•
A modem (DSL or cable), broadband router, or other
device provided by your Internet Service Provider that
brings Internet access to your site.
A network switch or a DSL/Internet gateway device.
Copyright © 2013 Ruckus Wireless, Inc.
Published April 2013, Part Number 800-70437-001 Rev A
Alternatively, connect the 10/100/1000 port to a PoE
injector or PoE switch for both power and network connectivity.
Verify that the Power LED on the external enclosure is a
steady green.
STEP 2: PREPARE YOUR COMPUTER
SETUP
FOR
AP
NOTE:
The following procedures assume Windows 7 as the operating
system. Procedures for other OS’s are similar.
Default AP Settings (For Your Reference)
Network Names
(SSIDs)
Wireless1—Wireless8
Security (Encryption
method)
Disabled for each wireless interface
Default Management 192.168.0.1
IP Address
On your Windows 7 computer, configure your network
adapter from the Local Area Connection settings as follows:
•
Username: super
Password: sp-admin
Click Login.
•
•
Start > Control Panel > Network and Sharing
Center > Change Adapter Settings
Edit the TCP/IPv4 address settings as follows:
Page 1 of 2
STEP 4: CUSTOMIZE
THE
WIRELESS SETTINGS
On the Web interface menu, click Configuration > Wireless. The Configure :: Wireless :: Common options appear.
Verify that the following options are active:
•
•
Figure 2. Flat wall mount
Channel: SmartSelect
Country Code: If you are not located in the United
States, select your current country.
Click Update Settings if you made any changes.
Click any of the eight “Wireless #” tabs at the top of the
page.
In Wireless Availability, click Enabled.
Delete the text in the SSID field, and then type a name for
your network that will help your users identify the AP in their
wireless network connection application.
Click Update Settings to save your changes.
Click Logout to exit the Web interface.
Repeat Steps 4-7 for each Wireless # interface that you want
to enable.
STEP 5: PLACE
THE
AP IN YOUR SITE
Move the AP to its permanent location (accessible to both
AC power and network connection).
Use an Ethernet cable to connect the 10/100/1000 port of
the AP to your network.
Place the AP on the wall and mark the locations for screw
holes.
Drill screw holes, place the AP onto the wall and insert
screws.
Figure 5. DIN rail mounting
The ZoneFlex 7441 can be mounted to a wall horizontally as
shown in Figure 3.
Figure 3. Horizontal wall mount
Grounding the Access Point
If you will be using PoE, you will need a Cat5e (or better)
Ethernet cable to connect the AP to the PoE injector or switch.
Connect the AC power adapter (or PoE power supply) to the
AP, then to a convenient power source.
Verify that the 10/100/1000 port LED is lit.
Congratulations! Your wireless network is active and ready for
use.
Attach the brackets to the AP as shown in Figure 3.
Place the AP on the wall and mark the locations for screw
holes.
Drill screw holes, place the AP onto the wall and insert
screws.
(OPTIONAL) MOUNTING INSTRUCTIONS
The ZoneFlex 7441 mounting options include desktop, wall
mounting (flat), wall mounting (horizontal), and DIN rail
mounting.
DIN Rail Mounting
Wall Mounting (Flat)
Attach the wall mounting brackets to the ZoneFlex 7441 as
shown in Figure 2.
Copyright © 2013 Ruckus Wireless, Inc.
Published April 2013, Part Number 800-70437-001 Rev A
Mount the AP to the DIN rail as shown in Figure 5.
Wall Mounting (Horizontal)
NOTE:
Figure 4. DIN rail clip
Attach ground wire to the AP using the included terminal
ring and two hex nuts as shown in Figure 6. The terminal
ring can accommodate wire sizes ranging from 16 to 25
gauge.
Figure 6. Grounding the AP
Use the DIN rail clip on the rear of the AP to connect mount to a
DIN rail.
Remove the screw on the housing back wall and use to
attach the DIN rail clip to the rear of the AP as shown in Figure 4. The clip has a tab to prevent rotation which fits into
the corresponding slot in the housing.
DIN Rail Removal
A large, flat screwdriver inserted from the bottom of the
product can be used to pry the clip off the rail.
Page 2 of 2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Extract
Author                          : Ruckus Wireless
Create Date                     : 2007:02:21 14:03:02Z
Modify Date                     : 2013:06:12 09:13:17-07:00
Language                        : en
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : FrameMaker 10.0.2
Metadata Date                   : 2013:06:12 09:13:17-07:00
Format                          : application/pdf
Title                           : Ruckus Wireless AP ZF2942/7942 Quick Setup Guide
Creator                         : Ruckus Wireless
Producer                        : Acrobat Distiller 10.1.5 (Windows)
Document ID                     : uuid:229e7cc9-2323-440c-bd49-ac6589976ba0
Instance ID                     : uuid:bf5c7739-352e-47f5-92a7-651f356a4e1e
Page Mode                       : UseOutlines
Page Count                      : 2

EXIF Metadata provided by EXIF.tools