Ruckus Brocade FastIron SX, FCX, And ICX Web Management Interface User Guide Fast Iron 07.4.00 07400

2017-04-26

• Contents
• About This Document
  • Supported hardware and software
  • Document conventions
    • Text formatting
    • Notes
  • Trademark references
  • Related publications
  • Getting technical help
  • Document feedback
• Getting Started with the Web GUI
  • Access requirements
  • Logging in to the Web Management Interface
  • Logging out of the Web Management Interface
  • Using the Web Management Interface
    • Web Management Interface areas
• Monitoring Device Performance and Metrics
• Monitoring Basic Device Information
  • Displaying the ARP cache
  • Displaying the device information
  • Displaying flash information
  • Displaying memory information
  • Displaying the front panel
    • Status LED display
    • Displaying the front panel for the Brocade FCX devices
    • Displaying the front panel for the Brocade ICX 6610 device
    • Displaying the front panel for the Brocade ICX 6430 device
    • Displaying the front panel for the Brocade ICX 6450 device
    • Displaying the front panel for the Brocade FastIron SX devices
  • Displaying MAC addresses
  • Displaying the system log
• Monitoring Stacks
  • Displaying the stack details
  • Displaying a stack module
  • Displaying stack neighbors
  • Displaying stack ports information
  • Displaying stack port statistics
  • Displaying stack port interfaces
  • Displaying stack resources
• Monitoring Ports
  • Displaying Ethernet port statistics
  • Displaying Ethernet port attributes
  • Displaying Ethernet port utilization
  • Displaying the management port information
    • Displaying the management port real-time information
  • Displaying port inline power for the Brocade FCX and Brocade ICX devices
    • Displaying inline power statistics
    • Displaying inline power details
  • Displaying port inline power for the Brocade FastIron SX devices
• Monitoring STP
  • Displaying STP information
• Monitoring RSTP
  • Displaying RSTP information
• Monitoring IP
  • Displaying IP cache
  • Displaying IP traffic information for devices running Layer 2 code
  • Displaying IP traffic information for devices running Layer 3 code
  • Displaying the IP routing table
• Monitoring OSPF
  • Displaying the OSPF ABR ASBR router information
  • Displaying OSPF area information
  • Displaying OSPF external link state database
  • Displaying the OSPF interfaces
  • Displaying OSPF link state database
  • Displaying OSPF neighbors
  • Displaying OSPF virtual interfaces
  • Displaying OSPF virtual neighbors
• Monitoring PIM
  • Displaying the PIM neighbors
  • Displaying the PIM virtual interfaces
• Monitoring DVMRP
  • Displaying DVMRP neighbors
  • Displaying DVMRP next hop entries
  • Displaying DVMRP routes
  • Displaying DVMRP virtual interfaces
• Monitoring BGP
  • Displaying BGP attributes
  • Displaying BGP neighbors
  • Displaying BGP route statistics
  • Displaying the BGP neighbor summary
• Monitoring Virtual Redundant Router
  • Displaying VRRP interfaces
  • Displaying VRRP virtual router entries
  • Displaying VRRP-E interfaces
  • Displaying VRRP-E virtual router entries
  • Displaying VSRP virtual switch entries
• Monitoring RMON
  • Displaying RMON history
  • Displaying RMON Ethernet statistics
  • Changing polling interval
  • Displaying RMON Ethernet error statistics
• Configuring Device Components
• Configuring Stack Components
  • Configuring the general settings for an IronStack
  • Modifying stack priority
  • Modifying stack ports
  • Configuring a stack module
• Configuring System Components
  • Configuring the system boot sequence for the Brocade FCX and Brocade ICX devices
  • Configuring the system boot sequence for the Brocade FastIron SX devices
  • Configuring the system clock
  • Configuring the system DNS
  • Configuring the general system settings
  • Configuring the system identification
  • Configuring the system IP address
  • Configuring a standard ACL
  • Configuring an extended ACL
  • Configuring an IP access group
  • Configuring the system MAC filter
    • Configuring a filter group
  • Configuring the maximum system parameter value
  • Configuring a system module
  • Configuring an NTP server
  • Configuring a RADIUS server
  • Configuring a TACACS/TACACS+ server
  • Configuring management authentication
  • Configuring management authorization
  • Configuring management accounting
  • Configuring an SNMP community string
  • Configuring the general management parameters
  • Configuring a management system log
  • Configuring a trap
  • Configuring a trap receiver
  • Configuring a management user account
  • Configuring the web management preference
• Configuring Module Components
  • Configuring a module
  • Modifying inline power budget
• Configuring Port Parameters
  • Configuring an Ethernet port
  • Configuring port inline power
  • Configuring a management port
  • Configuring the port uplink relative utilization
• Configuring Monitor and Mirror Port
  • Configuring a mirror port
  • Configuring a monitor port
• Configuring QoS
  • Configuring the QoS profile
  • Configuring the QoS profile bind
• Configuring VLAN
  • Configuring a port VLAN for the Brocade FCX and Brocade ICX devices
  • Modifying a port VLAN
  • Configuring a port VLAN for the Brocade FastIron SX devices
  • Configuring a protocol VLAN
    • Configuring an IP subnet VLAN
    • Configuring an IPX network VLAN
• Configuring STP
  • Configuring STP parameters
    • Changing STP bridge parameters
    • Changing STP port parameters
• Configuring RSTP
  • Configuring RSTP parameters
    • Changing RSTP bridge parameters
    • Changing RSTP port parameters
• Configuring Trunks
  • Adding trunks
• Configuring a Static Station
  • Adding a static station
  • Modifying a static station
• Configuring IP
  • Configuring the router IP address
  • Configuring a standard ACL
  • Configuring an extended ACL
  • Configuring an IP access group
  • Configuring an IP AS-path access list
  • Configuring an IP community list
  • Configuring an IP prefix list
  • Configuring a DNS entry
  • Configuring the general IP settings
  • Configuring IP interfaces
  • Configuring a static ARP
  • Configuring a static RARP
  • Configuring a static route
  • Configuring a UDP helper
    • Enabling forwarding for a UDP application
• Configuring OSPF
  • Configuring an OSPF area
  • Configuring the OSPF area range
  • Configuring the general OSPF settings
  • Configuring OSPF interfaces
  • Configuring an OSPF redistribution filter
  • Configuring OSPF virtual link interfaces
  • Configuring an OSPF trap
• Configuring RIP
  • Configuring the general RIP settings
  • Configuring a RIP interface
  • Configuring a RIP neighbor filter
  • Configuring a RIP route filter
    • Configuring a filter group
  • Configuring a RIP redistribution filter
• Configuring PIM
  • Configuring the general PIM settings
  • Enabling a PIM interface
• Configuring DVMRP
  • Configuring the general DVMRP settings
  • Configuring IGMP parameters
  • Configuring a DVMRP interface
• Configuring BGP
  • Configuring the general BGP settings
  • Configuring a BGP address filter
  • Configuring a BGP aggregate address
  • Configuring a BGP AS-path filter
  • Configuring a BGP community filter
  • Configuring a BGP neighbor
    • Configuring a BGP distribute list
    • Configuring a BGP filter list
    • Configuring a BGP prefix list
    • Configuring a BGP route map
  • Configuring a BGP network
  • Configuring BGP redistribute parameters
  • Configuring a BGP route map filter
    • Configuring a route map match
    • Configuring a route map set
• Configuring a Virtual Redundant Router
  • Modifying a VRRP interface
  • Configuring a VRRP virtual router
    • Configuring track ports
  • Modifying a VRRP-E interface
  • Configuring a VRRP-E virtual router
    • Configuring track ports
  • Modifying a VSRP interface
  • Configuring a VSRP virtual switch
    • Configuring track ports
• Device Commands
• Basic Device Commands
  • Clearing information for a Layer 2 switch
  • Clearing information for a Layer 3 switch
  • Disabling or enabling the menu view
  • Logging out
  • Reloading units in a stack
  • Saving the configuration to flash
  • Switching over to the active role
  • Performing hitless-reload from primary images
  • Performing hitless-reload from secondary images
  • Accessing the Telnet command prompt
  • Performing a trace
• Using TFTP
  • Configuring TFTP
  • Configuring a TFTP image