Ruckus FastIron Family Ation Updates, 07.4.00 Fast Iron 07.4.00h Updates 07400h
FastIron 07.4.00h ation Updates FastIron_07400h_ationUpdates
2017-04-26
User Manual: Ruckus FastIron 07.4.00h ation Updates
Open the PDF directly: View PDF
Page Count: 36
- Contents
- About This Document
- Brocade FastIron ICX 6610 Stackable Switch Hardware Installation Guide Updates
- Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide Updates
- FastIron Configuration Guide Updates
- Configuring stack guard
- Enabling BPDU protection by port
- Configuration notes for port mirroring and monitoring
- LLDP configuration notes and considerations
- Event (RMON group 9)
- Trunk group load sharing
- Trunk group rules
- Configuring a multi-port static MAC address
- Configuring and enabling sFlow
- Changing the login timeout period for Telnet sessions
- Configuring the route map
- Scroll control
- Adding multiple ACLs to a route map
- Configuring exec authorization
- Configuring an IP helper unicast
- High CPU on SXL
- Port speed and duplex mode modification
- PHY calibration in stack ports of ICX 6610
- Stack port resiliency in ICX 6610 devices
- Enabling broadcast or unknown unicast traffic to the PVLAN on FSX devices
- Selection of master node
- Static MAC address
- Power classes for PDs
- Multi-Device Port Authentication
- Example 5: Configuring a static trunk group for devices in an IronStack
- SSH show commands
- Virtual Cable Testing support
- ACL-based Rate Limiting and ACL Counting
- FWS supports DSA keys only
- Stacking configuration for ICX 6430
- IPv6 routing features
- show link-aggregate partner
- Local accounts with encrypted passwords
- Displaying CPU utilization statistics
- Enabling port speed down-shift
- Specifying the maximum number of login attempts for Telnet access
- MCT configuration considerations
- Documentation updates for Unified IP MIB Reference