Ruckus SWIPE 2.1.15 IOS Release Notes (GA) 20170321 V2.1.15.4 For I OS

2017-03-22

User Manual: Ruckus SWIPE v2.1.15.4 for iOS Release Notes

Open the PDF directly: View PDF PDF.
Page Count: 7

Ruckus Wireless
TM
SWIPE
Smart Wireless Installation and Provisioning
Engine
(iOS)
Version 2.1.15.4 Release Notes
March 21, 2017
SWIPE (iOS) 2.1.15 Release Notes
Page 2 of 7
Table of Contents
1. INTRODUCTION 4
2. SUPPORTED DEVICES 4
3. SUPPORTED OS 4
4. SUPPORTED FEATURES 4
5. SECURITY FEATURES 5
6. 3RD PARTY SOFTWARE AND FRAMEWORKS USED 5
7. SOFTWARE 5
8. SCG VERSIONS SUPPORTED 5
9. ISSUES FIXED 6
10. LIMITATIONS AND CAVEATS 6
10.1.
O
PEN
B
ACKLOG
6
SWIPE (iOS) 2.1.15 Release Notes
Page 3 of 7
Copyright Notice and Proprietary Information
Copyright 2016. Ruckus Wireless, Inc. All rights reserved.
No part of this documentation may be reproduced, transmitted, or translated, in any
form or by any means, electronic, mechanical, manual, optical, or otherwise, without
prior written permission of Ruckus Wireless, Inc. (“Ruckus”), or as expressly provided
by under license from Ruckus.
Destination Control Statement
Technical data contained in this publication may be subject to the export control laws
of the United States of America. Disclosure to nationals of other countries contrary to
United States law is prohibited. It is the reader’s responsibility to determine the
applicable regulations and to comply with them.
Disclaimer
THIS DOCUMENTATION AND ALL INFORMATION CONTAINED HEREIN
(“MATERIAL”) IS PROVIDED FOR GENERAL INFORMATION PURPOSES ONLY.
RUCKUS AND ITS LICENSORS MAKE NO WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, WITH REGARD TO THE MATERIAL, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, NON-
INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE
MATERIAL IS ERROR-FREE, ACCURATE OR RELIABLE. RUCKUS RESERVES
THE RIGHT TO MAKE CHANGES OR UPDATES TO THE MATERIAL AT ANY
TIME.
Limitation of Liability
IN NO EVENT SHALL RUCKUS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, OR DAMAGES FOR
LOSS OF PROFITS, REVENUE, DATA OR USE, INCURRED BY YOU OR ANY
THIRD PARTY, WHETHER IN AN ACTION IN CONTRACT OR TORT, ARISING
FROM YOUR ACCESS TO, OR USE OF, THE MATERIAL.
Trademarks
Ruckus Wireless, Ruckus, the bark logo, SmartZone, ZoneFlex, FlexMaster,
ZoneDirector, SmartMesh, ChannelFly, SmartCell, Dynamic PSK, and Simply Better
Wireless are trademarks of Ruckus Wireless, Inc. in the United States and other
countries. All other product or company names may be trademarks of their respective
owners.
SWIPE (iOS) 2.1.15 Release Notes
Page 4 of 7
1. Introduction
This document provides Release 2.1.15 (2.1.15.4) information on SWIPE (iOS),
along with known issues, caveats, workarounds, upgrade details, and
interoperability information.
2. Supported Devices
This release of the app supports and has been tested on the following phones
and tablets:
•
iPhone 4S
•
iPhone 5s
•
iPhone 5c
•
iPhone 6
•
iPad mini
•
iPad
3. Supported OS
This release has been tested on the following OSs:
•
iOS 8+
4. Supported Features
This release includes the following new feature:
Compatibility and support for SZ 3.5 when it becomes available.
Other features included in this release:
•
Connectivity Check Tool
•
Ping / Trace Route Test
•
Add AP to inventory.
•
View AP list sorted by AP name or Proximity or Error
•
AP location and step by step directions
•
Speedflex test
•
Allows Users to configure Access Points remotely by choosing the
Zone and AP Group
•
Includes picture of the AP in the email report
•
Support for larger form factor mobile devices
SWIPE (iOS) 2.1.15 Release Notes
Page 5 of 7
5. Security Features
This release includes the following security features:
•
Connections from the app to the SCG are over https
•
Username and password are required to access functionality
•
Passwords not stored in the app
6. 3rd Party Software and Frameworks Used
OSS Library JIRA Number Description
libwebp OSS-15 Used to encode and decode images in WebP
format
CocoaLumber
Jack OSS-8 Used as a logging framework in iOS
ZBarSDK OSS-13 Used for scanning
Reachability OSS-7
Used for detecting WiFi connection state. It is
ARC-compatible, and it uses the new GCD
methods to notify of network interface changes.
MBProgressHud OSS-6
For displaying translucent HUD with an indicator
and/or labels when app is doing operations in
background thread
SDWebImage OSS-14 Provides category for UIImageView with support
for remote images coming from web
MKNetworkKit OSS-23
Networking framework written in Objective-C that
is seamless, block based, ARC ready and easy
to use.
7. Software
• SWIPE 2.1.15.4
Download available from the Apple store:
SWIPE on Apple iTunes store
8. SCG Versions Supported
•
SCG 2.5, vSCG 2.5
•
SCG 2.5.1
•
SCG 2.6
SWIPE (iOS) 2.1.15 Release Notes
Page 6 of 7
•
SCG 3.0
•
vSCG 3.2
•
vSCG 3.4
•
vSCG 3.5
9. Issues Fixed
• SWIPE-1196: NSInvalidArgumentException: Object's persistent store is not
reachable from this NSManagedObjectContext's coordinator
• SWIPE-1197: NSInvalidArgumentException:NSPlaceholderDictionary
initWithObjects:forKeys:count
• SWIPE-984: The last 5 SCG IP addresses shown in login page in the
IPaddress field is getting displayed under the Password field title - Usability
issue
• SWIPE-1204: Integrate latest TestFairy SDK
• SWIPE-1195: NSGenericException: ZBarSymbolSet was mutated while being
enumerated.
• SWIPE-1211: In the AP details, the model number is shown, when user clicks
on it, there is nothing shown inside
• SWIPE-1232: Swipe Public API changes to support v3.2, v3.4, and v3.5
• SCG-63878: Edited AP details not updated on 3.5 after login again
• SCG-63877: AP details request return AP name value whereas AP list
request returns a valid name for same AP.
10. Limitations and Caveats
•
Sorting APs in the local app is not possible due to SCG API limitation.
•
Not able to scan some of the access points (eg: 7363, R600). Such access
points have an additional barcode-like symbol which is located close to the
Mac and serial number.
•
PING/Trace connectivity test is available for configured AP's only.
All the above issues have been reviewed by the x-func team and moved into Backlog
after confirmation from PLM.
10.1. Open Backlog
• SWIPE-100: Upload ZAP Results
SWIPE (iOS) 2.1.15 Release Notes
Page 7 of 7
• SWIPE-886: SWIPE2.0 IOS [2.0.10.1][Reporting tool] Search option is not
shown in Reporting tool
• SWIPE-89: Multi-lingual support
• SWIPE-1019: ap bootstrap

Navigation menu