Ruckus Virtual SmartZone Data Plane (vSZ D™) CLI Guide For 3.4.1 Smart Zone (MR) Command Line Interface Reference (v SZ D) Vszd 341 Ref Guide20161001
2016-10-17
User Manual: Ruckus SmartZone 3.4.1 (MR) Command Line Interface Reference Guide (vSZ-D)
Open the PDF directly: View PDF 
.
Page Count: 54
| Download | |
| Open PDF In Browser | View PDF |
Virtual SmartZone Data Plane (vSZ-D) for
SmartZone Release 3.4.1
Command Line Interface Reference Guide
Part Number: 800-71353-001 Rev A
Published: 28 September 2016
www.ruckuswireless.com
Contents
Copyright Notice and Proprietary Information
About This Guide
Document Conventions.................................................................................................5
Terminology..................................................................................................................6
Related Documentation.................................................................................................8
Online Training Resources.............................................................................................8
Documentation Feedback.............................................................................................8
1 Overview of the vSZ-D Command Line Interface
Accessing the Command Line Interface........................................................................9
2 Supported CLI User and Privileged Modes
User Mode..................................................................................................................16
enable...............................................................................................................16
end....................................................................................................................16
exit....................................................................................................................17
help...................................................................................................................17
history...............................................................................................................17
logout................................................................................................................18
ping...................................................................................................................18
quit....................................................................................................................19
show.................................................................................................................19
traceroute..........................................................................................................20
Privileged Mode...........................................................................................................21
ruckus#enable...................................................................................................21
ruckus#end.......................................................................................................21
ruckus#exit........................................................................................................21
ruckus#help.......................................................................................................22
ruckus#logout...................................................................................................22
ruckus#history...................................................................................................23
ruckus#disable..................................................................................................23
ruckus#reboot...................................................................................................23
ruckus#ping......................................................................................................24
ruckus#traceroute.............................................................................................25
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
2
ruckus#show.....................................................................................................25
ruckus#config....................................................................................................26
ruckus#debug...................................................................................................47
ruckus#backup..................................................................................................50
ruckus#restore..................................................................................................51
ruckus#clone.....................................................................................................51
ruckus#upgrade................................................................................................52
ruckus#setup....................................................................................................52
ruckus#shutdown..............................................................................................52
ruckus#route.....................................................................................................53
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
3
Copyright Notice and Proprietary Information
Copyright Notice and Proprietary Information
Copyright 2016. Ruckus Wireless, Inc. All rights reserved.
No part of this documentation may be used, reproduced, transmitted, or translated, in any form
or by any means, electronic, mechanical, manual, optical, or otherwise, without prior written
permission of Ruckus Wireless, Inc. (“Ruckus”), or as expressly provided by under license from
Ruckus.
Destination Control Statement
Technical data contained in this publication may be subject to the export control laws of the
United States of America. Disclosure to nationals of other countries contrary to United States
law is prohibited. It is the reader’s responsibility to determine the applicable regulations and to
comply with them.
Disclaimer
THIS DOCUMENTATION AND ALL INFORMATION CONTAINED HEREIN (“MATERIAL”) IS
PROVIDED FOR GENERAL INFORMATION PURPOSES ONLY. RUCKUS AND ITS LICENSORS
MAKE NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THE
MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY, NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE,
OR THAT THE MATERIAL IS ERROR-FREE, ACCURATE OR RELIABLE. RUCKUS RESERVES
THE RIGHT TO MAKE CHANGES OR UPDATES TO THE MATERIAL AT ANY TIME.
Limitation of Liability
IN NO EVENT SHALL RUCKUS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL
OR CONSEQUENTIAL DAMAGES, OR DAMAGES FOR LOSS OF PROFITS, REVENUE, DATA
OR USE, INCURRED BY YOU OR ANY THIRD PARTY, WHETHER IN AN ACTION IN CONTRACT
OR TORT, ARISING FROM YOUR ACCESS TO, OR USE OF, THE MATERIAL.
Trademarks
Ruckus Wireless, Ruckus, the bark logo, BeamFlex, ChannelFly, Dynamic PSK, FlexMaster,
Simply Better Wireless, SmartCell, SmartMesh, SmartZone, Unleashed, ZoneDirector and
ZoneFlex are trademarks of Ruckus Wireless, Inc. in the United States and other countries. All
other product or company names may be trademarks of their respective owners.
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
4
5
About This Guide
This Virtual SmartZone Data Plane (vSZ-D) Command Line Interface Reference Guide describes
the commands that the vSZ-D uses to enable the data plane based features on the Ruckus
Wireless platform.
This guide is written for service operators and system administrators who are responsible for
managing, configuring, and troubleshooting Wi-Fi networks. It assumes basic working knowledge
of local area networks, wireless networking, and wireless devices.
NOTE: Refer to the release notes shipped with your product to be aware of certain challenges
when upgrading to this release.
Most user guides and release notes are available in Adobe Acrobat Reader Portable Document
Format (PDF) or HTML on the Ruckus Wireless Support Web site at
https://support.ruckuswireless.com/contact-us.
Document Conventions
Table 1: Text conventions on page 5 and Table 2: Notice conventions on page 6 list the text
and notice conventions that are used throughout this guide.
Table 1: Text conventions
Convention
Description
Example
message phrase
Represents messages
displayed in response to a
command or a status
[Device Name] >
user input
Represents information that you [Device Name] > set
enter
ipaddr 10.0.0.12
user interface controls
Keyboard keys, software
buttons, and field names
Click Create New
Start > All Programs
Represents a series of
commands, or menus and
submenus
Select Start > All Programs
ctrl+V
Represents keyboard keys
pressed in combination
Press ctrl+V to paste the text
from the clipboard.
screen or page names
command name
Click Advanced Settings. The
Advanced Settings page
appears.
Represents CLI commands
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
5
About This Guide
Terminology
Convention
Description
Example
parameter name
Represents a parameter in a
CLI command or UI feature
variable name
Represents variable data
{ZoneDirectorID}
filepath
Represents file names or URI
strings
http://ruckuswireless.com
Table 2: Notice conventions
Notice type
Description
NOTE:
Information that describes important features
or instructions
CAUTION:
WARNING:
Information that alerts you to potential loss of
data or potential damage to an application,
system, or device
Information that alerts you to potential personal
injury
Terminology
The table lists the terms used in this guide.
Table 3: Terms used in this guide
Terminology
Description
ANQP
Access Network Query Protocol
AP
Access Point
CN
Common Name
CP
Captive Portal
CUI
Chargeable User Identity
EAP
Extensible Authentication Protocol
FQDN
Fully Qualified Domain Name
GAS
Generic Advertisement Service
HS2.0
Hotspot 2.0
IDM
Identity Management
MCC
Mobile Country Code
MNC
Mobile Network Code
MNO
Mobile Network Operator
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
6
About This Guide
Terminology
Terminology
Description
MO
Managed Object
MSO
Multiple System Operator
GTPv2-C
Network Access Identifier
NBI
Northbound Interface
OCSP
Online Certificate Status Protocol
OI
Organization Identifier
OMA-DM
Open Mobile Alliance’s Device Management
OSEN
OSU Server-only authenticated layer 2
Encryption Network
OSU
Online Sign-Up
Passpoint
Hotspot 2.0 certification
PKI
Public Key Infrastructure
PPS-MO
Per Provider Subscription Management Object
RAC
Radio Access Controller
RADIUS
Remote Access Dial In User Service
Release1 Device
Hotspot 2.0 Release1 specification compliant
device
Release 2 Device
Hotspot 2.0 Release 2 compliant device
RSN
Robust Security Network
SCG
Smart Cell Gateway
SSID
Service Set Identifier
SSL
Secure Socket Layer
T&C
Terms and Conditions
TCP
Transmission Control Protocol
TLS
Transport Layer Security
TTLS
Tunneled TLS
UDI
User Define Interface
UE
User Equipment
UE-IP
User Equipment - IP Address
UE-MAC
User Equipment - MAC Address
UI
User Interface
URI
Uniform Resource Identifier
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
7
About This Guide
Related Documentation
Terminology
Description
USIM
Universal Subscriber Identity Module
UTP
User Traffic Profile
UUID
Universal Unique Identifier
VSA
Vendor Specific Attributes
WAN
Wide Area Network
WFA
Wi-Fi Alliance
WLAN
Wireless Local Area Network
Related Documentation
For a complete list of documents that accompany this release, refer to the Release Notes.
Online Training Resources
To access a variety of online Ruckus Wireless training modules, including free introductory
courses to wireless networking essentials, site surveys, and Ruckus Wireless products, visit the
Ruckus Wireless Training Portal at:
https://training.ruckuswireless.com.
Documentation Feedback
Ruckus Wireless is interested in improving its documentation and welcomes your comments
and suggestions.
You can email your comments to Ruckus Wireless at: docs@ruckuswireless.com
When contacting us, please include the following information:
• Document title
• Document part number (on the cover page)
• Page number (if appropriate)
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
8
9
Overview of the vSZ-D Command Line
Interface
1
In this chapter:
•
Accessing the Command Line Interface
The Virtual SmartZone DataPlane (vSZ-D) command line interface (CLI) is a software tool that enables
you to configure and manage vSZ-D.
Using the command line interface, you can issue commands from an operating system prompt, such
as the Microsoft Windows command prompt or a Linux operating system terminal. Each command
performs a specific action for configuring device settings or returning information about the status of
a specific device feature.
Accessing the Command Line Interface
vSZ-D has a built-in command line interface (CLI) that you can use to configure vSZ-D settings
and manage access points. This section describes the requirements and the procedure for
accessing the vSZ-D CLI.
What You Will Need
To access the vSZ-D CLI, you will need the following:
1. A computer that you want to designate as administrative computer
2. A network connection to the vSZ-D (if you want to use an SSH connection)
3. An SSH (secure shell) client
Start and Configure the SSH Client
Before starting this procedure, make sure that the SSH client is already installed on the
administrative computer.
NOTE: The following procedure describes how to use PuTTY, a free and open source telnet/SSH
client, to access the vSZ-D CLI. If you are using a different SSH client, the procedure may be
slightly different (although the connection settings should be the same). For more information
on PuTTY, visit www.putty.org.
See the following sections depending on your connection method:
• Using SSH Connection
• Using Console Connection
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
9
Overview of the vSZ-D Command Line Interface
Accessing the Command Line Interface
Using SSH Connection
If you have connected the administrative computer to the same subnet or broadcast domain as
the Management (Web) interface of vSZ-D, follow these steps to start and configure the SSH
client.
1. Start PuTTY. The PuTTY configuration dialog box appears, showing the Session screen as
seen in Figure 1: Selecting SSH as a connection type on page 10.
2. In Connection type, select SSH.
Figure 1: Selecting SSH as a connection type
3. Enter the IP address of the Management interface of vSZ-D in the Host Name (or IP address)
field.
4. Click Open. The PuTTY console appears and displays the login prompt.
Using the Console Connection
With the vSphere Web Client, you can access a virtual machine's desktop by launching a console
to the virtual machine. From the console, you can perform activities within the virtual machine
such as configure operating system settings, run applications, and monitor performance. The
prerequisites are as follows:
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
10
Overview of the vSZ-D Command Line Interface
Accessing the Command Line Interface
• Ensure that the Client Integration Plug-in is installed in your Web browser.
• Verify that the virtual machine has a guest operating system and that VMware Tools are
installed.
• Verify that the virtual machine is powered on.
The procedure is as follows:
1. Select a virtual machine.
• In the virtual machines and templates inventory tree, select a group of virtual machines
and select a virtual machine from the list on the right.
• Search for a virtual machine and select it from the search results list.
2. In the Guest OS Details pane on the Summary tab, click Launch console.The virtual machine
console opens in a new tab of the Web browser.
3. Click anywhere inside the console window to enable your mouse, keyboard, and other input
devices to work in the console.
4. (Optional) Press Ctrl+Alt to release the cursor from the console window and work outside
the console window.
5. (Optional) Click Full Screen to display the console in full screen mode.
6. (Optional) Press Ctrl+Alt+Enter to exit full screen mode.
7. (Optional) Click Send Ctrl-Alt-Delete to send a Ctrl+Alt+Delete to the guest operating system.
Log On to CLI
The process to log on to the CLI is as follows:
• Log on to the vSZ-D using putty/Xssh (any other application) using the user credentials of
login name and password as given.
NOTE: You cannot use 'admin' as a password, which is used during the vSZ-D installation
procedure.
• The Ruckus Wireless vSZ-D CLI welcome message appears with the CLI prompt as seen in
Figure 2: Welcome to vSZ-D on page 12 .
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
11
Overview of the vSZ-D Command Line Interface
Accessing the Command Line Interface
Figure 2: Welcome to vSZ-D
• You are now logged into the vSZ-D CLI as a user with limited privileges by looking at the CLI
prompt. If you are in limited mode, the prompt appears as ruckus> (with a greater than sign).
To view a list of commands that are available at the root level or user mode, enter help or ?.
See Figure 3: Using Show Commands on page 12.
NOTE: To change the CLI prompt to a privileged mode, see step 5.
Figure 3: Using Show Commands
• As a user with limited privileges, you can view a history of commands that were previously
executed and ping a device as seen in Figure 4: Using the Ping command on page 13.
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
12
Overview of the vSZ-D Command Line Interface
Accessing the Command Line Interface
Figure 4: Using the Ping command
• If you want to run more commands, you need to switch to privileged mode by entering enable
and the password at the root prompt as seen in Figure 5: Changing to privileged mode on
page 13. The prompt changes from ruckus> to ruckus# (with a pound sign). Refer to the
enable command for details.
Figure 5: Changing to privileged mode
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
13
Supported CLI User and Privileged Modes
Supported CLI User and Privileged Modes
2
In this chapter:
•
•
User Mode
Privileged Mode
The supported commands are listed in a tree view as follows.
* Initial or User mode *
* Enable or Privileged mode *
–>enable
–>enable
–>end
–>end
–>exit
–>exit
–>help
–>help
–>logout
–>logout
–>quit
–>history
–>history
–>disable
–>show
–>reboot
–>ping
–>ping
–>traceroute
–>traceroute
–>setup
–>show
–>shutdown
–>config
•
•
•
•
•
•
•
•
–>end
–>help
–>history
–>logout
–>ip name-server
–>ip data-nat
–>set-factory
–>admin
•
•
•
•
•
•
–>help
–>logout
–>history
–>end
–>name
–>passwd
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
14
Supported CLI User and Privileged Modes
* Initial or User mode *
* Enable or Privileged mode *
• –>timeout
• –>show
• –>interface management
•
•
•
•
•
•
•
•
–>help
–>logout
–>history
–>end
–>no
–>ext-nat
–>ip
–>vlan
• –>interface data
•
•
•
•
•
•
•
•
–>help
–>logout
–>history
–>end
–>no
–>ext-nat
–>ip
–>vlan
• –>controller
•
•
•
•
•
–>help
–>logout
–>history
–>ip
–>end
• –>dpm
•
•
•
•
•
–>help
–>logout
–>history
–>end
–>hb-intvl
–>debug
•
•
•
•
•
–>help
–>diag
–>end
–>history
–>logout
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
15
Supported CLI User and Privileged Modes
User Mode
* Initial or User mode *
* Enable or Privileged mode *
• –>remote-syslogd
• –>save-log
–>backup
–>restore
–>clone
–>upgrade
–>route
User Mode
enable
Turns on privileged commands.
ruckus>enable
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
User
Example
ruckus>enable
end
Saves the changes and returns to the first tier.
ruckus>end
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
16
Supported CLI User and Privileged Modes
User Mode
Command Mode
User
Example
ruckus>end
exit
Exits from the EXEC mode.
ruckus>exit
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
User
Example
ruckus>exit
help
Displays the help messages.
ruckus>help
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
User
Example
ruckus>help
history
Displays a list of previously run commands.
ruckus>history
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
17
Supported CLI User and Privileged Modes
User Mode
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
User
Example
ruckus>history
logout
Exits from the vDP CLI application.
ruckus>logout
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
User
Example
ruckus>logout
ping
Sends ICMP echo packets to an IP address or domain name.
ruckus# or ruckus>ping[- LRUbdfnqrvVaA]
[-c count][-i interval][-w deadline][-p pattern]
[- s packetsize][-t ttl][-I interface or address]
[- M mtu discovery hint][- S sndbuf][ -T timestamp option ]
[ -Q tos ] [hop1 ...] destination
Syntax Description
This command has the following syntax:
• count
• interval
• deadline
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
18
Supported CLI User and Privileged Modes
User Mode
•
•
•
•
•
•
•
•
pattern
packetsize
ttl
interface or address
mtu discovery hint
sndbuf
timestamp option
destination
Default
This command has no default settings.
Command Mode
User
Example
ruckus(config)#ping
quit
Ends the CLI sessions.
ruckus>quit
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
User
Example
ruckus>quit
show
Displays system information.
ruckus>show
Syntax Description
This command has no syntax.
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
19
Supported CLI User and Privileged Modes
User Mode
Default
This command has no default settings.
Command Mode
User
Example
ruckus>showversion
Shows the system version number and serial number.
traceroute
Prints the route that the packets take to the network host.
ruckus# or ruckus>traceroute[ -46dFITnreAUV ][ -f first_ttl ][ -g
gate,... ] [ -i device ] [ -m max_ttl ] [ -N squeries ] [ -p port ]
[ -t tos ] [ -l flow_label ][ -w waittime ] [ -q nqueries ][ -s
src_addr ] [ -z sendwait ] host [ packetlen ]
Syntax Description
This command has the following syntax:
•
•
•
•
•
•
•
•
•
•
•
•
•
first_ttl
gate
device
max_ttl
squeries
port
tos
flow_label
waittime
nqueries
src_address
sendwait
packetlen
Default
This command has no default settings.
Command Mode
User
Example
ruckus#traceroute
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
20
Supported CLI User and Privileged Modes
Privileged Mode
Privileged Mode
ruckus#enable
Modifies the enable password.
ruckus#enable
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus#enable
Old password:
New password:
Retype:
ruckus#end
Saves the changes and returns to the first tier.
ruckus#end
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus#end
ruckus#exit
Exits from the EXEC mode.
ruckus#exit
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
21
Supported CLI User and Privileged Modes
Privileged Mode
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus#exit
ruckus#help
Displays the help messages.
ruckus#help
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus#help
ruckus#logout
Exits from the vDP CLI application.
ruckus#logout
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
22
Supported CLI User and Privileged Modes
Privileged Mode
Example
ruckus#logout
ruckus#history
Displays a list of previously run commands.
ruckus#history
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus#history
ruckus#disable
Disables Privileged commands.
ruckus#disable
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus#disable
ruckus#reboot
Reboots the VDP.
ruckus#reboot
Syntax Description
This command has no syntax.
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
23
Supported CLI User and Privileged Modes
Privileged Mode
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus#reboot
ruckus#ping
Sends ICMP echo packets to an IP address or domain name.
ruckus# ping[- LRUbdfnqrvVaA]
[-c count][-i interval][-w deadline][-p pattern]
[- s packetsize][-t ttl][-I interface or address]
[- M mtu discovery hint][- S sndbuf][ -T timestamp option ]
[ -Q tos ] [hop1 ...] destination
Syntax Description
This command has the following syntax:
•
•
•
•
•
•
•
•
•
•
•
count
interval
deadline
pattern
packetsize
ttl
interface or address
mtu discovery hint
sndbuf
timestamp option
destination
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(config)#ping
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
24
Supported CLI User and Privileged Modes
Privileged Mode
ruckus#traceroute
Prints the route that the packets take to the network host.
ruckus# traceroute[ -46dFITnreAUV ][ -f first_ttl ][ -g gate,... ]
[ -i device ] [ -m max_ttl ] [ -N squeries ] [ -p port ] [ -t tos ]
[ -l flow_label ][ -w waittime ] [ -q nqueries ][ -s src_addr ] [ -z
sendwait ] host [ packetlen ]
Syntax Description
This command has the following syntax:
•
•
•
•
•
•
•
•
•
•
•
•
•
first_ttl
gate
device
max_ttl
squeries
port
tos
flow_label
waittime
nqueries
src_address
sendwait
packetlen
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus#traceroute
ruckus#show
Shows system information.
ruckus#show
Syntax Description
This command has the following syntax:
• version : shows system version number and serial number
• interface: shows configured and current network settings for management and data interfaces.
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
25
Supported CLI User and Privileged Modes
Privileged Mode
• interface management-config: Shows configured network settings for the management
interface.
• interface data-config: Shows configured network settings for the data interface.
• interface current-management: Shows the current network settings for the management
interface.
• interface current-data: Shows the current network settings for the data interface.
• dpm: Shows DPM related configuration.
• status: Shows current network settings and connection status between vSCG and VDP.
• stats: Shows the current VDP traffic statistics and basic system information.
• controller : Shows the controller related configuration.
• upgrade : Shows vSZ-D previous upgrade information.
• upgrade-history: Shows vSZ-D upgrade history.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus#show version
ruckus#config
Configure options and settings in this mode.
ruckus#config
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus#config
ruckus(config)#end
Saves the changes and returns to the first tier.
ruckus(config)#end
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
26
Supported CLI User and Privileged Modes
Privileged Mode
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(config)#end
ruckus(config)#help
Displays the help messages.
ruckus(config)#help
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(config)#help
ruckus(config)#history
Displays a list of previously run commands.
ruckus(config)#history
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
27
Supported CLI User and Privileged Modes
Privileged Mode
Example
ruckus(config)#history
ruckus(config)#logout
Exits from the vSZ-D CLI application.
ruckus(config)#logout
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(config)#logout
ruckus(config)#ip name-server
Sets the name server.
ruckus(config)#ip name-server
Syntax Description
This command has the following syntax.
address:
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(config)#ip name-server
ruckus(config)#ip-data-nat
Sets the external NAT IP address of the data interface.
ruckus(config)#ip-data-nat
Syntax Description
This command has no syntax.
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
28
Supported CLI User and Privileged Modes
Privileged Mode
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(config)#ip-data-nat
ruckus(config)#set-factory
Sets factory to default settings.
ruckus(config)#set-factory
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus>enableruckus#configruckus(config)#set-factory
ruckus(config)#admin
Enter the admin mode to configure admin settings.
ruckus(config)#admin
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus>enable
ruckus#config
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
29
Supported CLI User and Privileged Modes
Privileged Mode
ruckus(config)#admin
ruckus(config-admin)#..
ruckus(config-admin)#end
Saves the changes and returns to the first tier.
ruckus(config-admin)#end
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(config-admin)#end
ruckus(config-admin)#help
Displays the help messages.
ruckus(config-admin)#help
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(config-admin)#help
ruckus(config-admin)#history
Displays a list of previously run commands.
ruckus(config-admin)#history
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
30
Supported CLI User and Privileged Modes
Privileged Mode
Command Mode
Privileged
Example
ruckus(config-admin)#history
ruckus(config-admin)#logout
Exits from the vSZ-D CLI application.
ruckus(config-admin)#logout
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(config-admin)#logout
ruckus(config-admin)#name
Sets the host name.
ruckus(config-admin)#name
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus>enable
ruckus#config
ruckus(config)#admin
ruckus(config-admin)#name
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
31
Supported CLI User and Privileged Modes
Privileged Mode
ruckus(config-admin)#passwd
Sets the local account super password.
ruckus(config-admin)#passwd
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus>enable
ruckus#config
ruckus(config)#admin
ruckus(config-admin)#passwd
ruckus(config-admin)#timeout
Sets the CLI idle timeout value.
ruckus(config-admin)#timeout
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus>enable
ruckus#config
ruckus(config)#admin
ruckus(config-admin)#timeout
ruckus(config-admin)#show
Displays the administrative settings.
ruckus(config-admin)#show
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
32
Supported CLI User and Privileged Modes
Privileged Mode
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus>enable
ruckus#config
ruckus(config)#admin
ruckus(config-admin)#show
ruckus(config)#interface management
Configure management interface settings through config interface mode.
ruckus(config)#interface management
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus>enable
ruckus#config
ruckus(config)#interface management
ruckus(config-interface)#
ruckus(config-interface)#end
Saves the changes and returns to the first tier.
ruckus(config-interface)#end
Syntax Description
This command has no syntax.
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
33
Supported CLI User and Privileged Modes
Privileged Mode
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(config)#interface management
ruckus(config-interface)#end
ruckus(config-interface)#help
Displays the help messages.
ruckus(config-interface)#help
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(config)#interface management
ruckus(config-interface)#help
ruckus(config-interface)#history
Displays a list of previously run commands.
ruckus(config-interface)#history
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(config)#interface management
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
34
Supported CLI User and Privileged Modes
Privileged Mode
ruckus(config-interface)#history
ruckus(config-interface)#logout
Displays a list of previously run commands.
ruckus(config-interface)#logout
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(config)#interface management
ruckus(config-interface)#logout
ruckus(config-interface)#ext-nat data-nat-addr
Sets the external NAT IP address of the data interface.
ruckus(config-interface)#ext-nat data-nat-addr
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus>enable
ruckus#config
ruckus(config)#interface management
ruckus(config-interface)#ext-nat data-nat-addr
ruckus(config-interface)#ip
Sets the interface settings. ip addr sets the interface static IP address. ip mode sets the
interface IP mode. ip gateway sets the interface gateway.
ruckus(config-interface)#ip addr
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
35
Supported CLI User and Privileged Modes
Privileged Mode
ruckus(config-interface)#ip mode or
ruckus(config-interface)#ip gateway
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus>enable
ruckus#config
ruckus(config)#interface data | management
ruckus(config-interface)#ip addr
ruckus(config-interface)#ip mode
ruckus(config-interface)#ip gateway
ruckus(config-interface)#vlan
Sets interface VLAN.
ruckus(config-interface)#vlan <0-4095>
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus>enable
ruckus#config
ruckus(config)#interface {data | management}
ruckus(config-interface)#vlan <0-4095>
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
36
Supported CLI User and Privileged Modes
Privileged Mode
ruckus(config-interface)#no vlan
Disables the VLAN interface.
ruckus(config-interface)#no vlan <0-4095>
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus>enable
ruckus#config
ruckus(config)#interface {data | management}
ruckus(config-interface)# no vlan <0-4095>
ruckus(config)#interface data
Configures data interface settings.
ruckus(config)#interface data
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus>enable
ruckus#config
ruckus(config)#interface data
ruckus(config-interface)#
ruckus(config-interface)#end
Saves the changes and returns to the first tier.
ruckus(config-interface)#end
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
37
Supported CLI User and Privileged Modes
Privileged Mode
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(config)#interface data
ruckus(config-interface)#end
ruckus(config-interface)#help
Displays the help messages.
ruckus(config-interface)#help
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(config)#interface data
ruckus(config-interface)#help
ruckus(config-interface)#history
Displays a list of previously run commands.
ruckus(config-interface)#history
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
38
Supported CLI User and Privileged Modes
Privileged Mode
Command Mode
Privileged
Example
ruckus(config)#interface data
ruckus(config-interface)#history
ruckus(config-interface)#logout
Exits from the vSZ-D CLI application.
ruckus(config-interface)#logout
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(config)#interface data
ruckus(config-interface)#logout
ruckus(config-interface)#ext-nat data-nat-addr
Sets the external NAT IP address of the data interface.
ruckus(config-interface)#ext-nat data-nat-addr
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus>enable
ruckus#config
ruckus(config)#interface data | management
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
39
Supported CLI User and Privileged Modes
Privileged Mode
ruckus(config-interface)#ext-nat data-nat-addr
ruckus(config-interface)#ip
Sets the interface settings. ip addr sets the interface static IP address. ip mode sets the
interface IP mode. ip gateway sets the interface gateway.
ruckus(config-interface)#ip addr
ruckus(config-interface)#ip mode or
ruckus(config-interface)#ip gateway
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus>enable
ruckus#config
ruckus(config)#interface data | management
ruckus(config-interface)#ip addr
ruckus(config-interface)#ip mode
ruckus(config-interface)#ip gateway
ruckus(config-interface)#no data-nat-addr
Removes external NAT of the data interface.
ruckus(config-interface)#no data-nat-addr
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
40
Supported CLI User and Privileged Modes
Privileged Mode
Example
ruckus>enable
ruckus#config
ruckus(config)#interface data
ruckus(config-interface)#no data-nat-addr
ruckus(config-interface)#no vlan
Disables the VLAN interface.
ruckus(config-interface)#no vlan <0-4095>
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus>enable
ruckus#config
ruckus(config)#interface {data | management}
ruckus(config-interface)# no vlan <0-4095>
ruckus(config-interface)#vlan
Sets interface VLAN.
ruckus(config-interface)#vlan <0-4095>
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus>enable
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
41
Supported CLI User and Privileged Modes
Privileged Mode
ruckus#config
ruckus(config)#interface {data | management}
ruckus(config-interface)#vlan <0-4095>
ruckus(config)#controller
Configures the virtual DataPlane settings.
ruckus(config)#controller
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus>enable
ruckus#config
ruckus(config)#controller
ruckus(config-controller)#
ruckus(config-controller)#end
Saves the changes and returns to the first tier.
ruckus(config-controller)#end
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(config)#controller
ruckus(config-controller)#end
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
42
Supported CLI User and Privileged Modes
Privileged Mode
ruckus(config-controller)#help
Displays the help messages.
ruckus(config-controller)#help
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(config)#controller
ruckus(config-controller)#help
ruckus(config-controller)#history
Displays a list of previously run commands.
ruckus(config-controller)#history
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(config)#controller
ruckus(config-controller)#history
ruckus(config-controller)#logout
Exits from the vSZ-D CLI application.
ruckus(config-controller)#logout
Syntax Description
This command has no syntax.
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
43
Supported CLI User and Privileged Modes
Privileged Mode
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(config)#controller
ruckus(config-controller)#logout
ruckus(config-controller)#ip
Sets the vSZ IP address.
ruckus(config-controller)#ip
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus>enable
ruckus#config
ruckus(config)#controller
ruckus(config-controller)#ip
ruckus(config)#dpm
Configues DPM settings.
ruckus(config)#dpm
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
44
Supported CLI User and Privileged Modes
Privileged Mode
Command Mode
Privileged
Example
ruckus>enable
ruckus#config
ruckus(config)#dpm
ruckus(config-dpm)#
ruckus(config-dpm)#end
Saves the changes and returns to the first tier.
ruckus(config-dpm)#end
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(config-dpm)#end
ruckus(config-dpm)#help
Displays the help messages.
ruckus(config-dpm)#help
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(config-dpm)#help
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
45
Supported CLI User and Privileged Modes
Privileged Mode
ruckus(config-dpm)#history
Displays a list of previously run commands.
ruckus(config-dpm)#history
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(config-dpm)#history
ruckus(config-dpm)#logout
Exits from the vSZ-D CLI application.
ruckus(config-dpm)#logout
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(config-dpm)#logout
ruckus(config-dpm)#hb-intvl
Sets the DPM heartbeat interval. The heartbeat interval is between 10 and 255 seconds.
ruckus(config-dpm)#hb-intvl
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
46
Supported CLI User and Privileged Modes
Privileged Mode
Command Mode
Privileged
Example
ruckus>enable
ruckus#config
ruckus(config)#dpm
ruckus(config-dpm)#hb-intvl 50
ruckus#debug
Manages system debug options.
ruckus#debug
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus#debug
ruckus(debug)#
ruckus(debug)#end
Saves the changes and returns to the first tier.
ruckus(debug)#end
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
47
Supported CLI User and Privileged Modes
Privileged Mode
Example
ruckus(debug)#end
ruckus(debug)#help
Displays the help messages.
ruckus(debug)#help
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(debug)#help
ruckus(debug)#history
Displays a list of previously run commands.
ruckus(debug)#history
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(debug)#history
ruckus(debug)#logout
Exits from the vSZ-D CLI application.
ruckus(debug)#logout
Syntax Description
This command has no syntax.
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
48
Supported CLI User and Privileged Modes
Privileged Mode
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus(debug)#logout
ruckus(debug)#diag
Diagnostic with internal CLI. Supports internal commands: tunnelmgr_cli, tbldump, dpminfo,
and dp_comm.
ruckus(debug)#diag
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus>enable
ruckus#debug
ruckus(debug)#diag
ruckus(debug)#remote-syslogd
Enables or disables the redirection of syslog to the remote syslog server.
ruckus(debug)#remote-syslogd enable
ruckus(debug)#remote-syslogd disable
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
49
Supported CLI User and Privileged Modes
Privileged Mode
Example
ruckus#debug
ruckus(debug)#remote-syslogd enable
ruckus(debug)#remote-syslogd disable
ruckus(debug)#save-log
Saves the log to remote vSZ-D/ftp/sftp.
ruckus(debug)#save-log scg
ruckus(debug)#save-log [username] [password]
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus#debug
ruckus(debug)#save-log scg
ruckus(debug)#save-log [username] [password]
ruckus#backup
Backs up vDP configurations.
ruckus#backup
[username is needed if you used FTP] [password is needed if you used
FTP]
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
50
Supported CLI User and Privileged Modes
Privileged Mode
Example
ruckus>enable
ruckus#backup
ruckus#restore
Restore vSZ-D configuration.
ruckus#restore [username is needed if you used FTP] [password is needed if you
used FTP]
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus>enable
ruckus#restore
ruckus#clone
Clones the vSZ-D configuration.
ruckus#clone
[username is needed if you used FTP] [password is needed if you used
FTP]
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus>enable
ruckus#clone
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
51
Supported CLI User and Privileged Modes
Privileged Mode
ruckus#upgrade
Upgrades the vDP firmware.
ruckus#upgrade [username is needed if you used FTP] [password is needed
if you used FTP]
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus>enable
ruckus#upgrade
ruckus#setup
Setup wizard. To configure the interface/network settings and local password.
ruckus#setup
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus#setup
ruckus#shutdown
Shuts down the vSZ-D.
ruckus#shutdown[ now | (minutes) ]
Syntax Description
This command has the following syntax.
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
52
Supported CLI User and Privileged Modes
Privileged Mode
now : Shutdown the system immediately.
X : shutdown the system after X minutes.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus#shutdown
ruckus#route
Sets the static route.
ruckus#route show
ruckus#route {add | del} ROUTE
ruckus#route dump
Syntax Description
This command has no syntax.
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus>enable
ruckus#route show
ruckus#route {add | del} ROUTE
ruckus#route dump
where: ROUTE := []
Virtual SmartZone Data Plane (vSZ-D) for SmartZone Release 3.4.1 Command Line Interface Reference Guide
53
Index
A
N
admin 29
name 31
no data-nat-addr 40
no vlan 37, 41
B
backup 50
P
C
passwd 32
ping 18, 24
privileged Mode 14
clone 51
config 26
console Connection 9
controller 42
copyright information 4
Q
quit 19
D
R
debug 47
diag 49
disable 23
dpm 44
reboot 23
remote-syslogd 49
restore 51
route 53
E
S
enable 16, 21
enable Mode 14
end 16, 21, 26, 30, 33, 37, 42, 45, 47
exit 17, 21
ext-nat data-nat-addr 35, 39
save-log 50
set-factory 29
setup 52
show 19, 25, 32
shutdown 52
sSH Client 9
sSH Connection 9
H
hb-intvl 46
help 17, 22, 27, 30, 34, 38, 43, 45, 48
history 17, 23, 27, 30, 34, 38, 43, 46, 48
I
T
timeout 32
traceroute 20, 25
trademarks 4
initial Mode 14
interface data 37
interface management 33
ip 35, 40, 44
ip name-server 28
ip-data-nat 28
U
L
virtual SmartZone DataPlane 9
vlan 36, 41
vSZ-D 9
legal 4
log on to vSZ-D CLI 9
logout 18, 22, 28, 31, 35, 39, 43, 46, 48
upgrade 52
user Mode 14
V
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Author : Ruckus Wireless, Inc. Create Date : 2016:09:28 10:05:52Z Modify Date : 2016:09:28 15:40:06+05:30 Subject : Virtual SmartZone Data Plane (vSZ-D™) CLI Guide for SmartZone 3.4.1 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Title : Virtual SmartZone Data Plane (vSZ-D™) CLI Guide for SmartZone 3.4.1 Creator : Ruckus Wireless, Inc. Description : Virtual SmartZone Data Plane (vSZ-D™) CLI Guide for SmartZone 3.4.1 Producer : XEP 4.22 build 2013 Trapped : False Creator Tool : DITA Open Toolkit Metadata Date : 2016:09:28 15:40:06+05:30 Document ID : uuid:6cad4a6e-65fd-4e99-a91f-946eb33affeb Instance ID : uuid:395fa2a5-10ff-4bab-bf64-df814f1b9d4f Page Mode : UseOutlines Page Count : 54EXIF Metadata provided by EXIF.tools