RuggON MC7354 Single Modular User Manual PX 501 UM

RuggON Corporation Single Modular PX 501 UM

User manual_Part 1

Download: RuggON MC7354 Single Modular User Manual PX 501 UM
Mirror Download [FCC.gov]RuggON MC7354 Single Modular User Manual PX 501 UM
Document ID2982924
Application IDnag/Jh5JLZVspupW4jRqAg==
Document DescriptionUser manual_Part 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize372.71kB (4658894 bits)
Date Submitted2016-05-09 00:00:00
Date Available2016-05-17 00:00:00
Creation Date2016-05-03 17:23:49
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2016-05-03 17:26:14
Document TitlePX-501 UM
Document CreatorAdobe InDesign CS6 (Windows)
Document Author: NOVA TC

PX-501
User's Manual
Š2015 RuggON Corporation. All rights reserved.
TRADEMARKS
RuggON logo is a trademark of RuggON Corporation, registered in the United States Patent and
Trademark Office and in other countries. Microsoft and the Windows logo are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Microsoft products are licensed to OEMs by Microsoft Licensing, Inc., a wholly owned subsidiary
of Microsoft Corporation. The BluetoothÂŽ word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. All other brand and product names are trademarks or registered trademarks
of their respective owners.
Images shown in this document may vary slightly from actual products at time of shipping.
Information in this manual is subject to change without notice.
Table of Contents
About This Manual
Related Information ......................................................................................1
Conventions..................................................................................................1
Basic Safety Guidelines
Intended Use ................................................................................................2
Maintenance and Operation Overview .........................................................2
Safety ...........................................................................................................3
Electrical Hazards.........................................................................................3
Environmental...............................................................................................3
Radio Transmissions ....................................................................................4
Cleaning and Servicing.................................................................................4
Regulatory and Certification .........................................................................4
Lithium Battery Safety Statement .................................................................5
Chapter 1. Introduction
About This Guide..........................................................................................7
Unpacking the Device...................................................................................7
Technical Specifications ...............................................................................7
PX-501 Configuration Options......................................................................9
Parts List.....................................................................................................10
Identifying the Device ................................................................................. 11
Identifying the Digitizer ...............................................................................15
Dimensions.................................................................................................16
Touch Screen Features ..............................................................................17
Chapter 2. Getting Started
First Time Use ............................................................................................18
Charging the Battery...................................................................................18
Powering the Device On and Off ................................................................19
Installing the Micro SIM Card .....................................................................20
Removing the Micro SIM Card ...................................................................21
Installing the MicroSD Card........................................................................22
Removing the MicroSD Card......................................................................23
Using the Digitizer ......................................................................................24
Removing the Protective Film from the Display..........................................25
Chapter 3. Operation
Opening the I/O Compartment Cover.........................................................26
Closing the I/O Compartment Cover ..........................................................27
Connecting to External Cabling ..................................................................28
Handstrap, Carrying Handle and Shoulder Strap .......................................30
Installing the Standard Battery ...................................................................34
Removing the Standard Battery .................................................................35
Connecting to a Wireless Network .............................................................36
Chapter 4. Using BIOS Setup Utility
When to Use the BIOS Setup Utility ...........................................................38
Accessing the BIOS Setup Utility ...............................................................38
Installation an Operating System................................................................39
BIOS Passwords ........................................................................................42
EC and BIOS ..............................................................................................44
Chapter 5. Using the DashON Utility
Overview.....................................................................................................49
Chapter 6. Troubleshooting
Troubleshoot the Wi-Fi Connection ............................................................62
Troubleshoot Operating the Computer .......................................................63
Call Product Support ..................................................................................63
Chapter 7. Maintenance
Cleaning the Device ...................................................................................64
Returning the Device ..................................................................................64
Contacting RuggON ...................................................................................64
ii
About This Manual
The PX-501 User’s Manual provides instruction for qualified personnel to follow when setting up a
new PX-501 device.
This document is intended for use by qualified personnel to compliment the training and expertise,
not to replace it.
Related Information
Current information and manuals are available for download at the following website:
http://www.ruggon.com
Conventions
Bolded or underlined text is used to emphasize the designated information.
A Note is used to provide additional information for the device or settings.
A Caution is used to warn against potential hazards or to caution against unsafe practices.
A Warning is used to identify immediate hazards for property damage, injury or death.
Basic Safety Guidelines
The following safety guidelines are intended to help protect the user from injury and prevent
damage to the hardware.
„
Do not place anything on the AC adapters power cable and make sure the cable is not
located where it can be tripped over or stepped on.
„
Do not cover the AC adaptor as it reduces the cooling
„
Do not use the AC adapter while it is inside the carrying case.
„
Use only the AC adapter, power cord, and batteries that are approved for use with the device.
Use of another type of battery or AC adapter may cause risk of fire or explosion.
„
If you use an extension cable with the AC adapter, ensure that the total ampere rating of
all products plugged in to the extension cable does not exceed the ampere rating of the
extension cable.
„
If the device is moved between environments with very different temperature and/ or humidity
ranges, condensation may form on or within the device. Avoid damaging the device by
allowing sufficient time for the moisture to evaporate before using the device.
„
When disconnecting cables, pull on the connector or on its strain relief loop, not on the
cable itself. When pulling out or plugging in the connector, keep it evenly aligned to prevent
bending the connector pins.
Intended Use
The PX-501 rugged tablet is equipped with multi-functional terminals for stationary and mobile
applications in industrial environments such as logistics, warehousing, fleet management,
manufacturing and the automotive industry.
Read the safety guidelines thoroughly before starting any servicing on the device. Read the
guidelines before powering up the device, and keep this document for later use.
The operator is solely responsible for any damage resulting from unauthorized modifications to the
device.
Unintended Application Use
The device is not designed for use in life-support systems or critical safety/security systems where
system malfunction can lead to the direct or indirect endangerment of human life. The operator is
fully responsible for using the device in these situations.
Maintenance and Operation Overview
The PX-501 is designed and manufactured according to strict controls and following the stated
safety regulations. The following list identifies incorrect operating uses of the PX-501. Incorrect
use of the PX-501 can lead to hardware damage, safety issues and possible risk to personnel
health:
„
The PX-501 is under operation by untrained personnel;
„
The PX-501 is not maintained as recommended;
„
The PX-501 is not used as intended.
Safety
To prevent injury and damage, read the following safety guidelines prior to operating the
device. The manufacturer assumes no liability for any and all damages arising from misuse or
noncompliance with these guidelines.
Electrical Hazards
Cleaning/Servicing: Power Off the PX-501
„
Disconnect the PX-501 from power before cleaning or servicing it.
Power Adapter
Contact an authorized service personnel for repairs to the power pack. In the event of a blown
fuse after replacing the fuse, contact an authorized service personnel to avoid electrical shock.
Use only Supplied Power Cables
RuggON power cables meet industrial requirements for low-temperature flexibility, UV resistance,
and oil resistance. Use only supplied power cables from RuggON.
If other power cables are used, the following may apply:
„
The operator is solely responsible for the resulting damage;
„
All RuggON warranties are void.
Environmental Hazards
Do not use the PX-501 in locations near/with flammable gases or vapor.
The use of electrical equipment in explosive environments can be dangerous.
„
Turn off the device when near a gas station, fuel depot, chemical plant or a place where
blasting operations take place.
Environmental
Ambient Temperature
The PX-501 operates on the basis of a passive cooling concept which internal waste heat is
released via the housing surface and requires fresh airflow in the environment.
„
Operating the PX-501 with no fresh cooling air may cause overheating and damage to the
device.
„
The operating environment should not be enclosed to prevent the cool air being heated by
the heat waste from the device.
Connecting and Disconnecting External Devices
To prevent the considerable damage, the PX-501 and the external device should be disconnected
from power when connecting/disconnecting excluding USB devices.
Only Use Authorized Accessories
Only use the supplied cables, power packs and other accessories that have been tested and
approved by RuggON. Contact your local distributor for further information.
Radio Transmissions
Permitted Transmission Power
Follow the national regulations for the maximum permitted transmission power.
The operator is solely responsible for this type of operation.
Radio Frequency Limited Locations
Considering the radio frequency limitation in hospitals and aircraft, the PX-501 can only be
installed with permission.
Industrial computers may affect the function of implanted medical devices such as pacemakers
and may cause malfunction.
Cleaning and Servicing
„
Disconnect the PX-501 from power before cleaning or servicing.
„
Never clean the PX-501 with compressed air, a pressure washer or a vacuum cleaner.
„
If necessary, clean the housing of the PX-501 with a damp cloth.
„
Clean the touch-screen with a nonabrasive cloth.
Regulatory and Certification
FCC
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
„
Reorient or relocate the receiving antenna.
„
Increase the separation between the equipment and receiver.
„
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
„
Consult the dealer or an experienced radio / TV technician for help.
Any changes or modifications not expressly approved by the grantee of this device could void the userÂĄs
authority to operate the equipment.
This device is operation in 5.15 - 5.25GHz frequency range, then restricted in indoor use only, Outdoor
operations in the 5.15 - 5.25GHz is prohibit.
This device is slave equipment; the device is not radar detection and not ad-hoc operation in the DFS
band.
Labeling Requirements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
RF Exposure Information (SAR)
This device meets the governmentÂĄs requirements for exposure to radio waves. This device is
designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications Commission of the U.S. Government.
The exposure standard employs a unit of measurement known as the Specific Absorption Rate,
or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard
operating positions accepted by the FCC with the EUT transmitting at the specified power level in
different channels.
The highest SAR value for the device as reported to the FCC is 1.18 W/kg when placed next to the
body.
CE Marking
This product has passed the CE test for environmental specifications when shielded cables are
used for external wiring. We recommend the use of shielded cables. Please contact your local
representative for ordering information.
This product has passed the CE test for environmental specifications. Test conditions for passing
included the equipment being operated within an industrial enclosure. In order to protect the
product from being damaged by ESD (Electrostatic Discharge) and EMI leakage, we strongly
recommend the use of CE-compliant industrial enclosure products.
R&TTE
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC.
This device is classified as class 2 in Article 1(2) of Decision 2000/299/EC due to its capability of
operating WLAN in the band 5.15 to 5.35 GHz.
CB
This device complies with
IEC 60950-1:2005+A1:2009+A2:2013
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
Lithium Battery Safety Statement
Lithium battery inside. Danger of explosion if battery is incorrectly replaced. Replace only with same or
equivalent type recommended by battery manufacturer.
6
Introduction
Chapter 1. Introduction
The PX-501 is a rugged device equipped with 802.11, Bluetooth and GNSS for wireless data
communications.
The PX-501 is a rugged 10.1” tablet computer capable of 1920 x 1200 resolution.
The PX-501 supports the following operating systems:
„
WindowsÂŽ Embedded 8.1 Industry 64bits
„
WindowsÂŽ Embedded Standard 7 64bits
„
WindowsÂŽ 7 Professional 64bits
„
WindowsÂŽ Embedded Standard 8 64bits
About This Guide
The PX-501 User Manual provides instruction for qualified personnel to use as a guide for setup of
the device. This document is not intended to replace the training and expertise of the end-user.
Unpacking the Device
Before you begin the installation or configuration process make sure to inspect all components
and accessories. Contact your representative if there are any missing or damaged items. See
“Contacting RuggON” on page 64.
Technical Specifications
Table 1. 
 
Item
Description
Display
10.1-inch LED Backlight, 1920 (W) x 1200 (H) WUXGA
Touch screen
10-point capacitive touch screen with digitizer
Brightness
1000 nits
CPU
Intel Core i5-4300U vPro 1.9 GHz
Operating System
(Optional)
„
„
„
„
RAM
DDR3L@1600 MHz 4 GB RAM (optional: 8 GB)
Storage
mSATA SSD 120 GB (optional: 240 GB)
Battery
„
„
Power Supply
AC 100V ~ 240V, 50~60Hz input; 19VDC@3.42A, 65W
Dimensions (W x H x L)
280 mm (11”) x 23 mm (0.9”) x 195 mm (7.7”)
Weight
1.36 kg (3 lbs)
WindowsÂŽ Embedded 8.1 Industry 64bits
WindowsÂŽ Embedded Standard 7 64bits
WindowsÂŽ 7 Professional 64bits
WindowsÂŽ Embedded Standard 8 64bits
Standard hot swappable battery: 10.8V, 4500mAh, Li-polymer
Extended hot swappable battery: 10.8V, 9000 mAh, Li-polymer
(optional)
Introduction
Item
Description
Wireless
WLAN
Wi-Fi IEEE 802.11 a/b/g/n/ac
Bluetooth
Bluetooth V4.0
WWAN (Optional)
Option for 3.5G or 4G LTE
Sensor
Sensor
Gyroscope, G Sensor, E-compass, Light Sensor
I/O
Docking Connector
12-pin
DC-IN Jack
x1
Micro SIM Card Slot
x1
MicroSD Slot
x1
Audio Jack
x1; headphone / microphone combo
USB 3.0
x1; type A
RS-232
x1
Micro HDMI
x1
Ethernet
x1
Security
TPM
TPM 1.2
BIOS On/Off for I/Os
YES
Data Collection
Camera
„
„
GNSS
YES
NFC
Optional
Barcode Reader
Optional
Magnetic Stripe Reader
Optional
Smart Card Reader
Optional
Front: 2.0 Mega-Pixels camera
Rear: 5.0 Mega-Pixels camera with LED auxiliary light and
Auto-focus
Introduction
Item
Description
Rugged Specifications
Drop
153 cm (5 feet), 26 drops on plywood
„
„
„
MIL-STD 810G
„
„
Vibration (MIL-STD-810G Method 514.6 Category 4,
Fig 514.6C-1, Fig 514.6C-2, Fig 514.6C-3)
Drop (MIL-STD-810G Method 516.6 Procedure IV)
Mechanical shock
(MIL-STD-810G Method 516.6 Procedure I, Procedure V)
Operation and storage temperature
(MIL-STD-810G Method 501.5 and 502.5)
Humidity MIL-STD-810G Method 507.5 Humidity Procedure II
Aggravated Cycles (Fig 507.5-7)
IP rating
IP65
Operating Temperature
Range
-20°C (-4°F) to 60°C (140°F)
Storage Temperature
Range
-30°C (-22°F) to 70°C (158°F)
Humidity
5-95% without condensation
PX-501 Configuration Options
The following options are available for the PX-501:
„
NFC module
„
Barcode reader
„
Smart card reader
„
High capacity battery
„
3.5G or 4G LTE
Introduction
Parts List
The PX-501 is shipped with the following items. All other accessories are sold and ordered
separately. For help, contact your local RuggON sales representative. See “Contacting RuggON”
on page 64.
fn
f1
f2
fn
PX-501
10
Power Adapter
Digitizer
2-Point Carrying Handle
2-Point Shoulder Strap
4-Point Handstrap
Hitch D-rings
(Attaching straps)
Introduction
Identifying the Device
Overview
fn
f1
f2
fn
Figure 1. Overview
Table 2. Overview
No
Item
Description
Left view
See “Side View” on page 14 for further information.
Front view
See “Front View” on page 12 for further information.
Rear view
See “Rear View” on page 15 for further information.
Right view
See “Side View” on page 14 for further information.
Rubber bumpers
Easy to grip rubber bumpers enable the rugged tablet to withstand
shocks and drop for use in demanding environments.
Bottom view
See “Bottom View” on page 13 for further information.
11
Introduction
Front View
14
13
12
fn
f1
f2
fn
11 10 9 8 7
Figure 2. Front View
Table 3. Front View
No
Item
Description
Front camera
2.0 Mega-Pixels camera.
Touch screen
5-point capacitive touch.
Barcode trigger
If barcode scanner is installed, press to scan.
Battery LED
Display battery status, see “LED Status” on page 13.
Wi-Fi LED
The Wi-Fi LED lights to indicate Wi-Fi is enabled.
FN LED
The FN LED lights when the function switch on.
Home key
WindowsÂŽ 8 home key.
Volume +
Volume increase.
Volume -
Volume decrease.
10
Power key
Turns the PX-501 on or off.
11
Power LED
The power LED lights when the device is on.
12
F2 key
Programmable function key.
13
F1 key
Programmable function key.
14
FN key
Programmable function key.
12
Introduction
LED Status
Table 4. LED Status
Item
Status
Power
Battery
FN
Wi-Fi
Description
Green: On
Power on
Off
Power off
Green: On
Fully charged
Amber: On
Charging
Amber:
Blinking
Low power < 15%
Off
Not charging / no battery
Blue: On
FN function switch on
Blue: Off
FN function switch off
Blue: On
Wi-Fi on
Blue: Off
Wi-Fi off
Bottom View
Figure 3. Bottom View
Table 5. Bottom View
No
Item
Description
Docking connector
12 pin connector for docking onto a station.
Kensington lock
Lock the PX-501 to a stationary object for security.
Pass-through
Dual pass-through for WLAN, GNSS and WWAN.
13
Introduction
Side View
Left view
ON
OFF
SIM SD
3.0
Right view
10
12
11
13
Figure 4. Side Views
Table 6. Side View
No
Item
Description
Micro HDMI
Connect HDMI devices to the PX-501.
MicroSD slot
Insert microSD card in to the slot.
Left I/O
compartment
cover
Open to access the left I/O ports.
Tether hole
Digitizer can be tethered to it.
Battery switch
Switch to ON to provide power from the backup battery.
Micro SIM slot
Insert micro SIM card for 3G or 4G LTE communication function.
USB 3.0
Connect USB devices to the PX-501.
Audio jack
Connect a 3.5 mm jack for a headphone or external speakers.
Ethernet
Connect the PX-501 to an Ethernet (RJ-45) cable.
10
DC-IN jack
Insert power connector to charge battery.
11
RS-232
Connect the PX-501 to a serial device.
12
DC-IN cover
Open to access the DC-IN jack.
13
Right I/O
compartment
cover
Open to access the right I/O port.
14
Introduction
Rear View
Figure 5. Rear View
Table 7. Rear View
No
Item
Description
Battery
To install a battery, an external battery is optional.
Rear camera
5.0 Mega-Pixels camera with LED auxiliary light.
Barcode reader
For installing a barcode reader. (Optional)
Fan
Embedded fan for cooling.
Securing holes
Secure the bumpers and the D-rings for the handstrap and shoulder
strap.
Expansion bay
Remove the cover to find the expansion accessory connector.
Digitizer holder
Place digitizer here.
Identifying the Digitizer
You can use the digitizer to control your PX-501 as with a mouse or keyboard.
The digitizer is not waterproof. Take care not to soak it or dip it in water.
Click Button
Tip
Figure 6. Digitizer View
15
Introduction
Dimensions
The following image lists the device dimensions without add-ons (mm/inches).
280
/ 11
28 / 11
f1
f2
19.5 / 7.7
195 / 7.7
fn
fn
Figure 7. Front View Dimensions
23
0.9
2.3 //0.9
Figure 8. Side View Dimensions
16
Introduction
Touch Screen Features
Always use the point of the digitizer for clicking or making strokes on the touch screen.
                
The digitizer is used as if it were a pen or pencil. Touch the screen with the tip of the digitizer then
remove the digitizer from the screen.
After each use, replace the digitizer in the digitizer holder for proper care and to preserve the life of
the digitizer.
Using a digitizer is similar to moving the mouse pointer then left-clicking icons on a desktop
computer screen.
The following actions are available through the use of the digitizer:
„
Open applications
„
Choose commands in menu
„
Select options in dialog box or drop-down menu
„
Drag the scroll bar
„
Drag across the text to select content
„
Place the cursor in a text box before typing
A right click is generated by tapping the mouse icon in the system tray. After tapping, the mouse
icon highlights the right button of the icon in red. The next touch screen tap is treated as a right
click. The mouse icon returns to the left button highlighted in red so subsequent taps are treated
as left clicks.
A digitizer replacement kit is available.
To prevent damage or malfunction, always dry the touch screen when wet.
17
Getting Started
Chapter 2. Getting Started
This section provides an outline of the steps necessary to setup a new PX-501. A detailed guide
follows the listed items, see as follows.
For additional technical assistance, contact your RuggON representative. See “Contacting
RuggON” on page 64.
It is recommended to installing or remove accessories on a clean, well-lit work
surface. To protect yourself and the device from electrostatic discharge, wear antistatic wrist straps or place the device on an anti-static mat.
First Time Use
1.
Open the left I/O compartment cover. See “Opening the I/O Compartment Cover” on page
26.
2.
Switch the switch to the ON position.
ON
OFF
SIM
Figure 9. Switching the Battery Switch
3.
Close the left I/O compartment cover. See “Closing the I/O Compartment Cover” on page
27.
Charging the Battery
When you use the AC adapter to connect your PX-501 to a power outlet, the standard and external
(optional) battery will automatically begin to recharge.
While the battery is charging, the power LED will be active. When the battery is fully charged, the
power LED is lit a solid green.
1.
Flip open the DC-IN cover to expose the DC-IN jack.
Figure 10. Opening the DC-IN Cover
18
Getting Started
2.
Connect the AC adapter to the DC-IN port.
Figure 11. Connecting the AC Adapter
After charging the battery, disconnect the AC adapter and close the DC-IN cover.
1.
Insert one end of the cover first and angle the cover to seat it in place.
2.
Push in the cover to seal the DC-IN compartment.
Figure 12. Closing the DC-IN Cover
The DC-IN cover must be inserted correctly to prevent internal damage to the device.
Powering the Device On and Off
Powering On the Device
Only power on the PX-501 after connecting all of the peripherals and cabling.
1.
Press and hold the power button until the screen lights. The device runs through the start up
sequence and powers up.
fn
Figure 13. Power On the PX-501
19
Getting Started
Powering Off the Device
„
Start screen:
Tap
„
„
> Shut down.
Desktop screen:
at the bottom left corner of the Desktop screen.
1.
Tap and hold
2.
Tap Shut down or sign out > Shut down.
Both Start screen and Desktop screen:
1.
Display charm bar and tap Settings.
2.
Tap Power > Shut down.
Installing the Micro SIM Card
The device includes a micro SIM card slot for cellular and wireless connection. Only a micro SIM
card is supported in the slot.
Check with your network or cellular service provider for availability and cost rates.
1.
Power off the PX-501. See “Powering Off the Device” on page 20.
2.
Open the left I/O compartment cover. See “Opening the I/O Compartment Cover” on page
26.
3.
Locate the micro SIM slot in the left I/O parts.
Left view
ON
OFF
SIM SD
Micro SIM Slot
3.0
Figure 14. Left View: Locating the Micro SIM Slot
20
Getting Started
4.
Take the micro SIM card from its packaging.
5.
The micro SIM card has a corner missing. Align the SIM card with the slot making sure that
the corners match.
6.
Insert the micro SIM card and press it in until an audible click sounds.
ON
OFF
3.
SIM SD
Figure 15. Installing the Micro SIM Card
7.
Close the left I/O compartment cover. See “Closing the I/O Compartment Cover” on page
27.
Removing the Micro SIM Card
1.
Power off the PX-501. See “Powering Off the Device” on page 20.
2.
Open the left I/O compartment cover. See “Opening the I/O Compartment Cover” on page
26.
3.
Locate the micro SIM slot in the left I/O parts.
Left view
ON
OFF
SIM SD
Micro SIM Slot
3.0
Figure 16. Left View: Locating the Micro SIM Slot
21
Getting Started
4.
Press the micro SIM card in and release it. The card springs out.
5.
Grasp the micro SIM card and remove it from the slot.
Figure 17. Removing the Micro SIM Card
6.
Close the left I/O compartment cover. See “Closing the I/O Compartment Cover” on page
27.
Installing the MicroSD Card
The device supports microSD card for easier data storage.
1.
Open the left I/O compartment cover. See “Opening the I/O Compartment Cover” on page
26.
2.
Locate the microSD slot in the left I/O parts.
Left view
ON
OFF
SIM SD
MicroSD Slot
3.0
Figure 18. Left View: Locating the MicroSD Slot
22
Getting Started
3.
The microSD card has a beveled edge. Align the microSD card with the slot making sure that
the corners match.
4.
Insert the microSD card and press it in until an audible click sounds.
ON
OFF
3.
SIM SD
Figure 19. Installing the MicroSD Card
5.
Close the left I/O compartment cover. See “Closing the I/O Compartment Cover” on page
27.
Removing the MicroSD Card
1.
Open the left I/O compartment cover. See “Opening the I/O Compartment Cover” on page
26.
2.
Locate the microSD slot in the left I/O parts.
Left view
ON
OFF
SIM SD
MicroSD Slot
3.0
Figure 20. Left View: Locating the MicroSD Slot
23
Getting Started
3.
Press the microSD card in and release it. The card springs out.
4.
Grasp the microSD card and remove it from the slot.
Figure 21. Removing the MicroSD Card
5.
Close the left I/O compartment cover. See “Closing the I/O Compartment Cover” on page
27.
Using the Digitizer
Following the information below when using a digitizer:
„
Use only the included digitizer to touch the screen. Do not place any objects on its surface
and do not press down strongly with sharp-pointed or hard objects that may leave marks
(e.g., nails, pencils and ball point pens).
„
Use the digitizer only for touching the screen. Using it for any other purpose may damage the
digitizer and result in scratches on the screen.
„
The digitizer uses electromagnetic induction and may not work properly near strong electrical
field or magnetic field such as:
„
Near AM radio base stations or relay station antennas
„
Near CRT displays that generate strong electromagnetic field noise
Move the digitizer away from such locations so it works properly.
„
The pointer cannot follow the digitizer movement if you move the digitizer too quickly.
To make a selection, tap the screen once with the digitizer. To double-click, tap twice without
pausing. To do a right-click, tap the screen once and hold the tip of the digitizer on the screen, the
right-click icon appears. Press the click button is the same as a right click.
24
Getting Started
Removing the Protective Film from the Display
The front display of the PX-501 is protected during transport by a transparent film. This film should
remain on the front display during assembly to avoid damage to the front display surface.
Only remove the film once all of the assembly work has been completed.
fn
f1
f2
fn
Figure 22. Removing the Protective Film
25
Operation
Chapter 3. Operation
Opening the I/O Compartment Cover
1.
Place the device display side down on a clean work surface.
2.
Locate the I/O compartment cover.
Left view
Right view
ON
Right I/O
Compartment
Cover
OFF
SIM SD
3.0
Left I/O
Compartment
Cover
Figure 23. Side View: Locating the I/O Compartment Cover
3.
Unlock the latch. (Only available for the left I/O compartment cover)
Figure 24. Unlocking the Latch
4.
Pull out the I/O compartment cover.
Figure 25. Openin the I/O Compartment Cover
26
Operation
Closing the I/O Compartment Cover
1.
Place the device display side down on a clean work surface.
2.
Locate the I/O compartment cover.
Left view
Right view
ON
Right I/O
Compartment
Cover
OFF
SIM SD
3.0
Left I/O
Compartment
Cover
Figure 26. Side View: Locating the I/O Compartment Cover
3.
Flip the I/O compartment cover and install.
Figure 27. Installing the I/O Compartment Cover
4.
Lock the latch. (Only available for the left I/O compartment cover)
Figure 28. Locking the Latch
The I/O compartment cover must be inserted correctly to prevent internal damage to the device.
27
Operation
Connecting to External Cabling
To prevent damage to the device, connect all cabling and accessories before
powering up the device.
Connect USB Cabling
The PX-501 have one USB port for connecting USB devices, such as a digital camera, scanner,
printer, modem, and mouse. The USB port support USB 2.0 or USB 3.0 devices.
1.
Open the left I/O compartment cover. See “Opening the I/O Compartment Cover” on page
26.
2.
Connect to USB device via USB cable.
SIM SD
3.0
Figure 29. Connect USB Cabling
Connect Ethernet Cabling
The PX-501 provide have a Ethernet port for connecting Ethernet.
Use a shielded cable is required to maintain emissions and susceptibility compliance.
1.
Open the left I/O compartment cover. See “Opening the I/O Compartment Cover” on page
26.
2.
Connect LAN cable to Ethernet port on the PX-501.
3.0
Figure 30. Connect Ethernet cabling
28
Operation
Connect Audio Cabling
For higher audio quality, you can send sound through external audio devices such as speakers,
headphones, or earphone using audio connector.
1.
Open the left I/O compartment cover. See “Opening the I/O Compartment Cover” on page
26.
2.
Connect the audio cable.
3.0
Figure 31. Connect Audio Cabling
Connect Micro HDMI Cabling
Connect to HDMI devices via micro HDMI cable.
1.
Open the left I/O compartment cover. See “Opening the I/O Compartment Cover” on page
26.
2.
Connect micro HDMI cable to micro HDMI port on the PX-501.
ON
OFF
3.
SIM SD
HD
MI
Figure 32. Connect Micro HDMI Cabling
29
Operation
Connect RS-232 Cabling
Connect to RS-232 devices with an RS-232 cable.
1.
Open the right I/O compartment cover. See “Opening the I/O Compartment Cover” on page
26.
2.
Align the RS-232 cable with the port in the device and connect it.
3.
Turn the locking screws on the cable to secure it to the device.
Figure 33. Connect RS-232 Cabling
Handstrap, Carrying Handle and Shoulder Strap
The PX-501 is equipped with a handstrap, a carrying handle and a shoulder strap for convenience
and choice. Select the accessory that is right for your needs.
The handstrap can be installed with either the shoulder strap or the carrying handle. However, the
handle and shoulder strap can not be installed together due to space constraints.
For more information, see “Connecting the Handstrap” on page 30, “Connecting the Carrying
Handle” on page 33 and “Connecting the Shoulder Strap” on page 33.
Connecting the Handstrap
1.
Remove the screws securing the bumpers.
Figure 34. Removing the Screws
30
Operation
2.
Install the D-rings.
        
     
Figure 35. Installing the D-rings
3.
Connect the handstrap on the D-rings.
When the handstrap is installed, the digitizer can be placed under the strap.
Figure 36. Connecting the Handstrap
31
Operation
Removing the Handstrap
1.
Unlock the handstrap from the D-rings.
Figure 37. Removing the Handstrap
2.
Remove the D-rings.
Figure 38. Removing the D-rings
3.
Secure the bumper and the PX-501 with screws.
Figure 39. Securing the Screws
32
Operation
Connecting the Carrying Handle
1.
Attach the clips to the metal loop on the bumper.
Metal Loop
Figure 40. Connecting the Carrying Handle
Removing the Carrying Handle
1.
Press in the clips to release them from the metal loop.
2.
Remove the clips.
Metal Loop
Figure 41. Removing the Carrying Handle
Connecting the Shoulder Strap
1.
Attach the clips to the metal loop on the bumper.
Metal Loop
Figure 42. Connecting the Shoulder Strap
33
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
Author                          : NOVA TC
Create Date                     : 2016:05:03 17:23:49+08:00
Modify Date                     : 2016:05:03 17:26:14+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : NOVA TC
Title                           : PX-501 UM
Creator Tool                    : Adobe InDesign CS6 (Windows)
Metadata Date                   : 2016:05:03 17:26:14+08:00
Trapped                         : False
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:1a36364e-bd3b-4744-837a-59d666f5f564
Instance ID                     : uuid:243dd3a1-e299-490a-87bb-f2b6b10f8af3
PDF Version                     : 1.6
Page Count                      : 37
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2ABTU-MC7354

Navigation menu