Ruijiahua Technology NIAEB37 Bluetooth Stereo Earbuds User Manual

Shenzhen Ruijiahua Technology CO.,LTD Bluetooth Stereo Earbuds

user manual

Wireless Stereo EarbudsUser’s Guide for Model IAEB37-1879-01Protect for Today Sustain for TomorrowMade   GreenSpecications are subject to change without notice. Copyright © 2017 Digital Products International (DPI, Inc.)  All other trademarks appearing herein are the property  of their respective owners.International SupportTo download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at:  www.iLiveElectronics.comPara descargar este Manual del Usuario en Inglés, Español y Francés, o para obtener respuestas a preguntas frecuentes, visite la sección de apoyo en: www.iLiveElectronics.comPour télécharger ce guide de l’utilisateur en Anglais, Espagnol ou Français, ou pour obtenir des réponses à des questions fréquemment posées, consultez la rubrique d’assistance sur:  www.iLiveElectronics.comFCC WARNINGSNOTE: This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures: •  Reorient or relocate the receiving antenna.•  Increase the separation between the equipment and receiver.•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•  Consult the dealer or an experienced radio/TV technician for help.  Changes or modications not expressly approved by the party responsible for compliancecould void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  (1) this device may not cause harmful interference, and (2) this device must accept any interference received,        including interference that may cause undesired           operation.Contact InformationWebsite: www.iLiveElectronics.comEmail Support: prodinfo@dpiinc.comEmail Parts: partsinfo@dpiinc.comPhone Support: 1-888-999-4215WarrantyFor Warranty Information and the most  up-to-date version of this User’s Guide, go to:  www.iLiveElectronics.com.ADDITIONAL WARNINGS •  WARNING: To prevent re or shock hazards, do not expose this unit to rain or moisture.•  WARNING : Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.•  Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.•  WARNING: This product may contain chemicals known to the State of California to cause birth defects, or other reproductive harm (California Prop 65). Wash hands after handling.•  This product meets and complies with all Federal regulations.•  To avoid hearing damage, make sure that the volume on your music player is turned down before connecting your earbuds. After placing earbuds in/on your ears, gradually turn up the volume until you reach a comfortable listening level.
DC Power InputVolumePower / Pair / Play / Pause /SpeakerphonePress and hold for 8-9 sec. to power ON and begin pairing.Press and hold for 5-6 sec. to power ON/OFF. Press to play/pause audio or answer/end a phone call.Overview & ControlsPower Status Indicator LightPower ON Flashing blue lightLow Battery Flashing red lightCharging Solid Red lightFinished Charging Solid Blue lightBluetooth Status Indicator LightPairing Bluetooth Flashing red and blue lightsSuccessfully Paired Slowly ashing blue lightFeatures• Bluetooth wireless• Sweatproof• Wireless range: 33 feet• Voice prompts announce earbud operations• Built-in microphone• Micro-USB port for battery recharge• DC battery power: built-in rechargeable battery• Battery life: approx. 4 hrsIncludes• 3 sets of eartips• Micro-USB to USB charging cable• User’s guideCharging the BatteryInitial charge time is approximately 2 hours. Charge fully before use. The low battery indicator will ash for 1 minute, then the unit will automatically power OFF. 1.  Using a Micro-USB to USB cable (included), connect to the USB port of a powered on computer or USB power adaptor to charge.Pairing a Bluetooth Device1.  While the unit is OFF, press and hold the Play/Pause/Speakerphone/Pair button for approximately 8-9 seconds until the indicator light ashes red and blue. When pairing, remain within 3 feet of the unit.2.  Using the controls on your Bluetooth device, select IAEB37 in your Bluetooth settings to pair.  If your device requests a password, enter the default password 0 0 0 0 . Refer to the user’s manual for your specic device for specic instructions on pairing to Bluetooth devices. 3.  When successfully paired, an audible chime will sound and the LED indicator will slowly ash blue. Audio from the connected Bluetooth device should now be heard through the earbuds, use the controls on the connected Bluetooth device to select and play audio.After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device.  Repeat these steps if your device should become unpaired or will not connect normally. Playing Audio Wirelessly1.  If the unit is OFF and has already been paired to a Bluetooth device, press and hold the Play/Pause/Speakerphone/Pair button for approximately 5-6 seconds until it automatically connects to your device. An audible chime will sound and the LED indicator will turn solid blue.2.  Use the controls on the connected Bluetooth device to select and play audio. 3.  To play or pause audio, press the Play/Pause button or use the controls on the connected Bluetooth device.Using the Speakerphone1.  To accept a call, press the Speakerphone button or use the controls on the connected phone. 2.  To end a call, press the Speakerphone button or use  the  controls  on  the  connected  phone.                             3.  To re-dial the last dialed number, press the Speakerphone button twice.

Navigation menu