Ruijiahua Technology NIAEP48 Bluetooth Stereo Headset User Manual

Shenzhen Ruijiahua Technology CO.,LTD Bluetooth Stereo Headset

user manual

Wireless Stereo HeadsetUser’s Guide for Model IAEP48-1969-01DC INMICProtect for Today Sustain for TomorrowMade GreenSpecications are subject to change without notice. Copyright © 2017 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners.International SupportTo download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.comPara descargar este Manual del Usuario en Inglés, Español y Francés, o para obtener respuestas a preguntas frecuentes, visite la sección de apoyo en: www.iLiveElectronics.comPour télécharger ce guide de l’utilisateur en Anglais, Espagnol ou Français, ou pour obtenir des réponses à des questions fréquemment posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.comFCC WARNINGS • Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Contact InformationWebsite: www.iLiveElectronics.comEmail Support: prodinfo@dpiinc.comEmail Parts: partsinfo@dpiinc.comPhone Support: 1-888-999-4215WarrantyFor Warranty Information and the most up-to-date version of this User’s Guide, go to: www.iLiveElectronics.com.ADDITIONAL WARNINGS • WARNING: To prevent re or shock hazards, do not expose this unit to rain or moisture.• WARNING : Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.• Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.• WARNING: This product may contain chemicals known to the State of California to cause birth defects, or other reproductive harm (California Prop 65). Wash hands after handling.• This product meets and complies with all Federal regulations.• To avoid hearing damage, make sure that the volume on your music player is turned down before connecting your earbuds. After placing earbuds in/on your ears, gradually turn up the volume until you reach a comfortable listening level.WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information go to: www.P65Warnings.ca.govthe following measures:This device complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC Rules. O peration is subject to the following two conditions:( 1) this device may not cause harmful interference, and( 2) this device must accept any interference received, including interference that may interference that may cause undesired operation.Operation is subject to the following two conditions:( 2) this device must accept any interference received, including
LEDOverview & ControlsDC INMICPower Status Indicator LightPower ON Flashing blue lightLow Battery Flashing red lightCharging Solid Red lightFinished Charging Solid Blue lightBluetooth Status Indicator LightPairing Bluetooth Flashing red and blue lightsSuccessfully Paired Slowly ashing blue lightVolumeFeatures• Bluetooth wireless• Wireless range: 33 feet• Voice prompts announce earbud operations• Built-in microphone• Neckband controls• Micro-USB port for battery recharge• DC battery power: built-in rechargeable battery• Battery life: approx. 4 hrsIncludes• 3 pairs of eartips - small / medium / large• Micro-USB to USB charging cable• User’s guideCharging the BatteryInitial charge time is approximately 2 hours. Charge fully before use. The low battery indicator will ash for 1 minute, then the unit will automatically power OFF. 1. Pull back the DC Input cover and, using a Micro-USB to USB cable (included), connect the DC Input to the USB port of a powered on computer or USB power adaptor (not included) to charge.Pairing a Bluetooth Device1. While the unit is OFF, press and hold the Play/Pause/Speakerphone/Pair button for approximately 8-9 seconds until the indicator light ashes red and blue. When pairing, remain within 3 feet of the unit.2. Using the controls on your Bluetooth device, select IAEP48 in your Bluetooth settings to pair. If your device requests a password, enter the default password 0 0 0 0 . Refer to the user’s manual for your specic device for specic instructions on pairing to Bluetooth devices. 3. When successfully paired, an audible chime will sound and the LED indicator will slowly ash blue. Audio from the connected Bluetooth device should now be heard through the earbuds, use the controls on the connected Bluetooth device to select and play audio.After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device. Repeat these steps if your device should become unpaired or will not connect normally. Playing Audio Wirelessly1. If the unit is OFF and has already been paired to a Bluetooth device, press and hold the Power/Pair/Play/Pause/Speakerphone button for approximately 5-6 seconds. The unit should automatically power ON and connect to your device. An audible chime will sound and the LED indicator will turn solid blue.2. Use the controls on the connected Bluetooth device to select and play audio. 3. Use the controls on the unit or the connected Bluetooth device to play, pause, and adjust the volume level.Using the Speakerphone1. To accept a call, press the Speakerphone button or use the controls on the connected phone. 2. To end a call, press the Speakerphone button or use the controls on the connected phone. 3. To re-dial the last dialed number, press the Speakerphone button twice. Power / Pair / Play / Pause /SpeakerphonePress and hold for 8-9 sec. to power ON and begin pairing.Press and hold for 5-6 sec. to power ON/OFF. Press to play/pause audio or answer/end a phone call.LED Indicator Light Magnetic Connection

Navigation menu