Ruoey Lung Enterprise N6-FM Remote control User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1902483
Application ID	JowsGAML/6Ek4uYfSPvkcA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	68.81kB (860165 bits)
Date Submitted	2013-02-20 00:00:00
Date Available	2013-02-20 00:00:00
Creation Date	0000-00-00 00:00:00
Producing Software	DocuPrint C1190 FS
Document Lastmod	0000-00-00 00:00:00
Document Title	User Manual
Document Creator	DocuPrint C1190 FS

The Advanced A.
ref I e x l o n 7
Wireless Aditlslable Bed
\IIAItNS t\‘ IOSIHK"
Wireless Hand
Remote Operation
LED SignaI Light
A. Raises the Head of the Bed ._.——— / a).
B. Lowers the Head of the Bed /
C. Raises the Foot of the Bed
E Returns Head & Foot ta FLAT ‘K
Position (hold 3 seconds) 4" D.Lowers the Foot 0/ the Bed
,t
/ ‘ G. I’m-Programmed
H. Increases the Intensity Memory POSITIOW 0. Under
of Vibration (Head) \ Bed Light
‘ M. FLIII Body Massage
I. Decreases the Intensity . V ‘ /. Increases the Intensity
of Vibration (Foot)
K. Decreases the Intensity
of Vibration (Foot)
L. Stops Massage
of Vibration (Head)/ . ". , .
N. Turns on Massage
Wave 1,2 or 3
Head and Foot Position Adjustments (A, B, C, D)
I Use to raise or lower the head and foot sections oi your adjustable bed. The premium
’WaII-Glide“ feature will automatically synchronize with all Head 8t Foot adjustmenu.
Bed "Flat“ Button (F)
0 Press down and hold for 3 seconds to return bed to the Iiat position.
Head and Foot Massage Adjustments (H, I, J, K)
- Use to activate the massage Ieature on the head and loot of the bed (starting at
intensity 4 ol 8). Gradually increase or decrease intensity of massage vibration by
pressing the appropriate button. The lowest setting on each massage unit will turn all
the respective vibration. The massage Icature is programmed with an Auto Shut—Oil
Tuner that will automatically turn oil the massage alter 15 minutes of continuous use.
A 5 minute cool down is required before initiating an additional massage sequence.
Exclusive
FOR YOUR SAFETY, READ THE OWNER'S MANUAL CAREFULLY/1ND COMPLETELY BEFORE ”Head nit Body_Hug er”
OPERATING THIS PRODUCT ELECTRIC XHOCK MAVOCCUR IF ElECTRlCAL COMPONENTS Feature Inc/”d
ARE NOT INSTALLED 0R OPERATED ACCORDING TO THESE GUIDE LINES.
TheAdvanced I .
r e f: I e x I 0 r1 7
Wireless Adjustable Bed
\lthNs x I()\III{'
Wireless Hand
Remote Opergtio ‘i
'ontlnue
Wave Massage Adjustments (N)
- Activates both units to wave mode massage. NOTE: Vou must stop the massage in order to activate another
massage setting such as Iull body or another wave massage.
Full Body Massage (M)
- Press to activate both the head and toot massages at the same time.
Pre-Programmed Memory Position (G)
- Those 3 program function keys allow you to select the most popular positions with I touch.
Stop Button (L)
- Hold down for 2 seconds to stop massage
REMEMBER: YOU MUST STOP MASSAGE BEFORE ALTERNATING BETWEEN MASSAGE FUNCTIONS.
Under Bed Light (0)
' Press the button to tum on or off the under bed light. (Button on back at Hand Wand)
Remote Features
' The Wall-Glide Adiustable Bod uses a RT (Radio Frequency) hand control system.
NOTE: This bed may show minor intermittent performance because of typ' RF irrterierence.
This is normal in the operation of the bed, not (1 def
' The buttons are hacklit, when a button is pressed, to aid in the visibility of the remote in low light envtronments.
0 It is not necessary to [ace the receiver to operate lhe remote r nntml. Remote signal is best IrEITNViIIICtI within
9 feet (3 meters) of the receiver.
Safety
t In the case that an overload of weight is placed on the head or foot mechanism, the control unit will automatically stop all
functions. The control unit will automatically resume all Iunctions 30 seconds after excess weight is removed.
- Massage motors will automatically shut off alter running continuously for 15 minutes. All massage lunctions will be
operational again after 5 minutes. Automatic Shut Oil will occur after 15 minutes of continuous use,
0 The input transformer voltage is AC1 20V EOHZ, the output voltage is DCZAV 3A. In the case of a short-circuit, a {use on the
transformer will blow to protect lhe electrical equipment (Fuse: IA~1.5A.). Should this occur, you MUST seek prolossional
assistance to replace the fuse. Call Customer Care at: 1-877-826-8757
Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Important Note: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device
is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requiremenu and
void user’s authority to operate the device.
THIS DEVICE COMPUES WITH PART 15 OF THE FCC RULES. OPERATION I5 SUBlECT TO THE FOLLOWING TWO
CONDITIONS: (1 )THIS DEVICE MAV NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT
ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 2
Producer                        : DocuPrint C1190 FS
Creator                         : DocuPrint C1190 FS

EXIF Metadata provided by EXIF.tools