User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2510157 |
| Application ID | RubzFPY3CmORaomDdcqGww== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 156.88kB (1961056 bits) |
| Date Submitted | 2015-01-22 00:00:00 |
| Date Available | 2015-07-21 00:00:00 |
| Creation Date | 2014-12-05 09:36:00 |
| Producing Software | Corel PDF Engine Version 3.0.0.739 |
| Document Lastmod | 2014-12-05 09:36:00 |
| Document Title | CD-6200-BTPFM3U2-S01_OEM-(ETL+FCC)ENGLISH IM_v0-141202 |
| Document Creator | CorelDRAW |
| Document Author: | NEWGMA |
The lightning flash and arrowhead within the triangle is a warning sign alerting you of "dangerous voltage" inside the product. BRAND CAUTION USER MANUAL WARNING: To reduce the risk of electric shock, do not remove cover (or back). RISK OF ELECTRIC SHOCK No user-serviceable parts inside. Refer servicing to qualified service personnel. DO NOT OPEN CAUTION: The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product. CAUTION: To reduce the risk of fire or electric shock or damage, do not expose this appliance/ apparatus (including all it’s accessories such as AC-adaptor, etc.) to dripping or splashing liquids, and no object filled with liquids should be placed on the appliance/ apparatus (including all it’s accessories). WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. PLEASE NOTE: YOU WILL FIND THE RATING LABEL FOR THIS PRODUCT LOCATED ON THE BOTTOM OF THE UNIT. CAUTION SYMBOLS ARE PRINTED ON BOTTOM OF UNIT OR ACCESSORIES. PLEASE REFER TO INSTRUCTION MANUAL. CAUTION: GROUNDING OR POLARIZATION: THE PRECAUTIONS SHOULD BE TAKEN SO THAT THE WIDER BLADE OF THE AC PLUG (OF AC-ADAPTOR) MUST MATCH THE SLOT IN RECEPTACLE "WALL SOCKET". (ONLY IF YOUR AC PLUG IS POLARIZED) CAUTION : DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE. BATTERY REPLACEMENT MUST ONLY BE DONE BY A QUALIFIED PROFESSIONAL TECHNICIAN. BATTERY SHALL NOT BE EXPOSED TO EXCESSIVE HEAT SUCH AS SUNSHINE, FIRE OR THE LIKE. MAINS PLUG IS USED AS THE DISCONNECT DEVICE AND IT SHOULD REMAIN READILY OPERABLE DURING INTENDED USE. IN ORDER TO DISCONNECT THE APPARATUS FROM THE MAINS COMPLETELY, THE MAINS PLUG SHOULD BE DISCONNECTED FORM THE MAINS SOCKET OUTLET COMPLETELY. The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the product. NOTE: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : -Reorient or relocate the receiving antenna. -Increase the separation between the product and receiver. Connect the product into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Model : CD-6200-BTPFM3U2 BT CD MP3 USB FM AUX CLASS 1 LASER PRODUCT CAUTION: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM. E-2 IMPORTANT SAFETY INSTRUCTIONS 1. READ INSTRUCTIONS - All the safety and operating instruction should be read before the product is operated. 2. RETAIN INSTRUCTIONS - The safety and operating instruction should be retained for future reference. 3. HEED WARNINGS - All warning on the product and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed. 5. CLEANING - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning. 6. ATTACHMENTS - Do not use attachments not recommended by the product manufacturer as they may cause hazards. 7. WATER AND MOISTURE - Do not use this product near water- for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 8. ACCESSORIES - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer. 9. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may causethe appliance and cart combination to overturn. 10. VENTILATION - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction have been adhered to. 11. POWER SOURCES - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instruction. 12. GROUNDING OR POLARIZATION - This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarizes plug. ALTERNATE WARNINGS - This product is equipped with a three-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact you electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug. 13. POWER-CORD PROTECTION - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and point where they exit from the product. 14. PROTECTIVE ATTACHMENT PLUG - The product is equipped with an attachment plug having overload protection. This is a safety feature. See Instruction Manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug. 15. OUTDOOR ANTENNA GROUNDING - If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. E-3 SEE FIGURE: ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) GROUNDING CONDUCTORS (NEC SECTION 810-21) ELECTRIC SERVICE EQUIPMENT GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) NEC - NATIONAL ELECTRICAL CODE 16. LIGHTNING - For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 17. POWER LINES - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 18. OVERLOADING - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 19. OBJECT AND LIQUID ENTRY - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 20. SERVICING - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards, Refer all servicing to qualified service personnel. 21. DAMAGE REQUIRING SERVICE - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the power-supply cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally be following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to damage and will often require extensive work by a qualified technician to restore the product to its normal operation. e) If the product has been dropped or damaged in any way, and f ) When the product exhibits a distinct change in performance this indicates a need for service. 22. REPLACEMENT PARTS - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards, 23. SAFETY CHECK - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 24. WALL OR CEILING MOUNTING - The product should be mounted to a wall or ceiling only as recommended by the manufacturer. 25. HEAT - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. E-4 DC AC Cord Top Handle AUX Volume Tune Volume Tune UM-2/"C"/LR14 (1.5V) SIZE x 6 PCS. FM-Preset Play Mode FM-Preset Stop (Standby) Speaker (Left) / BT Pair Program/ Memory CD OPEN CD Door LCD Display AC Source (BT, FM, CD, USB, AUX) Speaker (Right) AC Front Handle (Grip) Battery compartment USB Charging Port (5V - - - , 1A) USB (MP3 Playback) E-5 E-6 1 "STAND- BY" MODE LCD: "PROG." 12 H or 2 SEC. 24 H PRESS! ON! 2 12H or 24H? LCD: TUNE or TUNE BT "ON" ! OK! 12 H or 24 H SOURCE = BT "PROG." BT 3 HOUR SETTING TUNE or TUNE 03 : 00 OK! 03 : 00 "PROG." BT (SLOW) SEARCHING BT (FAST) PAIRING (CODE: 0000) BT (ON) CONNECTED 4 MINUTE SETTING TUNE or TUNE OK! 03 : 08 "PROG." 03 : 08 E-7 OK! E-8 SOURCE = CD REPEAT REPEAT 1 PLAY MODE TUNE or TUNE TRACK NO. ALL ALL CD 03 02 or 03:33 REPEAT ALL or SHUFFLE PRESET 2 SEC. MP3 F01 MP3 MP3 MEM. MEM F03 F02 MP3 OK! FOLDER NO. TUNE or TUNE MEM PLAY/PAUSE TUNE or TUNE SOURCE = USB USB-MP3 TRACK NO. 02 ~ 60 SEC. MEM 03 MAX. MP3 USB 001 P02 USB USB-MP3 MEM MEM MAX. CD = P20 MAX. MP3 = P99 SB E-9 E-10 OK! SOURCE = FM OK! AUX-INPUT FM 90.2 MHz SOURCE = AUX MANUAL TUNE AUTO or TUNE TUNE HOLD or TUNE 2 sec.! AUX FM 90.8 FM MHz 92.2 03:00 MHz USB CHARGING PORT OK! MEM MEM. AC PRESET + UP P02 or DC 5V - - - 1A OUTPUT P20 P06 MAX. FM MEM = P20 PRESET - POWER SUPPLY : ............................ AC120V ~ 60Hz DC 9V - - - (6 x C-CELL/ UM-2/ LR14 SIZE) (BATTERIES NOT INCLUDED) Recharge Power : .......................... USB 5V DOWN MEM E-11 OK! - - - 1A Frequency : ...................................... FM 87.5 - 108 MHz Wireless Range (BT) : ....................... 10M (30 Ft.) Max. BT Pairing Memory : .................. 4 Devices FM Station Memory : .......................... 20 Stations CD Program Memory : ........................ 20 Songs MP3 Program Memory : ...................... 99 Songs E-12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 6 Create Date : D:20141205093600 Modify Date : D:20141205093600 Producer : Corel PDF Engine Version 3.0.0.739 Author : NEWGMA Creator : CorelDRAW Title : CD-6200-BTPFM3U2-S01_OEM-(ETL+FCC)ENGLISH IM_v0-141202EXIF Metadata provided by EXIF.tools