S and O ELECTRONICS SA189AW Bluetooth Remote Control Module User Manual
S&O; ELECTRONICS (MALAYSIA) SDN. BHD. Bluetooth Remote Control Module
User Manual
Bluetooth Remote Module SA189AW User Manual
1. Specification:
The SA189AW independently developed by our company, is an intelligent wireless data transmission
2-Way Remote Control product. It is a 2-Way wireless transmission between the Remote Control with
the Main Unit. SA189AW is a Bluetooth 4.0 module base on the Texas Instruments chip with an
integrated 2.4GHz transceiver.
2. Application:
It is mainly used for data transmission between the Remote Control and Main Unit such as Sound Bar ,
Hi-Fi Component System and others. The module is include the keys and it can control the operation
and receive the information from the main unit.
3. Features/Performance:
Type SA189AW
Bluetooth Bluetooth Low Energy (BLE) -compliant
Modulation Mode GFSK
Wireless Tansmission Range 10m
Frequency Range 2.402GHz - 2.480GHz
Voltage Supply Battery 3.0V (AA x 2) , DC IN 5V (USB micro)
Operation Key Total 21 Carbon keys
Temparature Range
0oC to 40oC (operating)
Size 195 x 52 x 1.6mm FR4 PCB
4. Module Size unit :mm
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection againts harmful
interference I a residential installation. This equipment generates, uses and can be radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by tuning the quipment off and on, the user is encouraged to try to correct the inteference by one
or more of the following measures:
-Reorient or relocated the receiving antenna.
-Increase the separation between the equipment and receiver.
-Consult the dealer or experienced Radio/TC technicial for help.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2)This devices must accept any interference received, including interference that may cause undersired
operation.
Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
The transmitter module can not be located with any transmitter or antenna. The Module shall be only used
with intergral antenna(s) that has been originally tested and certified with this module.
End product labeling:
The final end product must be labeled is a visible area with the following :
Contains FCC ID: XXX-XXXXX
The OEM integrator has to be aware not to provide information to the end user regarding how to install or
remove in the user's manual of the end product which integrates this module.